Cannot install KB2092914 for Works 9

Similar Questions

• Cannot install itunes for windows - error: Apple Application Support is required to run Itunes Helper. Uninstall and reinstall (as I did twice)

  Cannot install itunes for windows - error: Apple Application Support is required to run Itunes Helper. Uninstall and reinstall (as I did twice)

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Re: Satellite A300-1 b 9 - cannot install updates for Vista and IE8

  Hello

  I have a Toshiba Satellite A300 1 9 b I bought 9 months ago. It has Vista Home Premium 32 bit SP1. I have serious problems with the updates:

  1 Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update (KB951847) x 86 - I can't install this for the last two months. Whenever it appears that the installation has failed.

  2 security Update for Windows Vista (KB961501) can be installed as well

  3. my Internet Explorer 8 does not work for the past two weeks. I tried to download it and when I did, then, my computer does not restart. I had to use sans-echec Mode, uninstall IE8 to return to Normal Mode

  4. I also tried to download and install SP2 for Vista, but it failed.

  I am very worried. Please suggest me what I should do.

  Thanks for your help.
  Stéphane

  I think that the decision of the antivirus program is a personal opinion

  I put t like McAfee and Norton because they need a lot of system resources and do a slower computer.
  I prefer AntiVir and Kaspersky Security suite. The two programs have good scan engine and don t need a lot of system resources. They are easy to use to use it.
  AntiVir is free but it s just an antivirus. Kaspersky Security suite also contains a firewall, antispam filter and more.

  It s your choice what program you are using. ;)

• Cannot install updates of work

  He continues to tell me in Windows Update I have to install this update and then attempt to install without an error-error code. Any other update isnatlled, but this one simply refuses to and I tried these last days to install several times.

  Hi sd1972,

  Method 1

  I suggest that you download and install the Microsoft Works 9 security updates check manually if it works.

  (a) open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.

  (b) in the left pane, click view update history.

  (c) to view more information about an update, double-click it.

  Get once the update number failed, then visit the link below for the download of Microsoft Center put the KB number in the search field to download the update manually.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 2

  If the previous step fails, then you need to contact the Microsoft Works will support center using the link below.

  http://www.Microsoft.com/products/works/downloads.mspx

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install Games for Windows Live

  I need to install Games for Windows Live to play several games on this laptop.

  When I run gfwlivesetup, all downloads very well and gets to the point where it installs GFWL and I get the following error every time:

  "An error occurred during the installation of assembly ' Microsoft.VC90.CRT, version ="9.0.21022.8", publicKeyToken ="1fc8b3b9a1e18e3b"processorArchitecture ="x 86", type ="win32 "'. See Help and Support for more information. »

  Looking through several log files, I discovered the error to be (0x8007078f) code that relates to, "connection failed: the machine you log on is protected by an authentication firewall." The specified account is not allowed to authenticate on the machine. »

  So two things come to mind. The account is authenticated and firewall. Well, my account is an administrator account and right click on gfwlivesetup and choose "run as Administrator" does not change a thing. Well, screw the router, I just take the right out of my router modem jack and plug rather the ethernet of my laptop, without going through all the ports that can be blocked. The only firewall that is up and running (the only one installed) is the MS OS firewall, so let's just turn this baby off and still the same error.

  So if we ignore all the error code (0x8007078f) completely, then we can treat the error originally presented... I see basically: processorArchitecture = "x 86", type = "win32".

  Well, I'm running a Windows 7 64 - Bit, and my processor is a Core i7-740... I am out of the resources here. I have seen many people having the same problem or similar (Google reveals a lot). So if someone is willing to stick with me throughout this, I intend to see resolved (at least for me). I only pray that as I did not reinstall Win 7 or make repairs. They do not understand all of these DVDs with the laptop.

  Thanks in advance,

  Jimmi G

  PS: System Specs

  Windows 7 Home Premium

  Intel Core i7-740

  6 GB DDR3 RAM

  GeForce GTX 460M

  Realtek HD Audio

  Hello

  The information below should be beneficial to obtain a resolution.

  http://www.Microsoft.com/games/en-us/support/pages/editgamerprofile.aspx

  http://www.Microsoft.com/games/en-us/community/pages/forums.aspx

  http://www.Microsoft.com/games/en-us/support/pages/default.aspx

  Thank you

  Aaron
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Cannot install updates for windows xp * error 0 X 80070424

  I can't start my microsoft firewall nor my update, I checked to make

  sure my updates are fixed to the car and they are, please help.

  Thank you

  AND

  http://support.microsoft.com/kb/968002 -

  Levonorgestrol error 0 x 80070424 when you use Windows Update, Microsoft Update, or Windows Firewall

   

  Summary:

  When you try to perform one of the following, you may receive an error message that contains error code:

  0 x 80070424

  • Install updates using Windows Update
  • Install updates using Microsoft Updates
  • Install updates for Microsoft Security Essentials
  • Start the Windows Firewall

• Cannot install updates for Vista Business - codes 8E5E0147, 00009C 47, dt000

  Get codes 8E5E0147, 00009C 47, dt000 when you try to install the updates.  2 codes of the latter appear when you try to download Windows explorer 9.

  Hi MarkVI,

  1. what update does not install?

  Follow the steps below to install the Vista updates.

  Method: 1

  Configure the computer to clean boot.

  View the following command to configure the computer to boot:

  How to perform a clean boot

  Note: After checking in the clean boot, follow step: 7 article to reset the computer in normal mode.

  Method: 2

  Perform the following troubleshooting steps to install updates for Windows Vista.

  Problems with installing updates

  Method: 3

  Also to reset the windows update components.

  How to reset the Windows Update components?

• Cannot install updates for Windows 7 SP1

  Hello

  I tried for awhile now to switch to Windows 10 without luck ( http://answers.microsoft.com/en-us/windows/forum/windows_10-win_upgrade/windows-7-key-not-recognized/9a66ab9a-819a-4285-9461-64e7528db222?tm=1450545430339&auth=1 ). In the end, I decided to reinstall Windows 7 RTM, install all updates and then upgrade to Windows 10.

  Unfortunately, I seem to be impossible to install updates for Windows 7 now. Everything was going fine until Windows Update Agent 7.6.7600.320 installed. After a few mistakes, WU start looking for updates for hours. I've tried everything as suggested here without a bit of luck. In the end, I decided to leave it to search through the night and finally it does find and download updates about 300.

  Installation of these updates takes about 4 hours and Windows restarted and tried to configure the new updates, restarted saying once again he could not configure the updates of Windows and it will undo the changes. And it's been like that for over an hour.

  So as soon as now I can not even update Windows 7, not to mention the upgrade of Windows 10.  Any ideas? I'm sick of the Windows updates, causing problems.

  Installation sometimes loads of updates at a time can cause problems. When you access the list of the 300 updates Windows updates to odd day again, deselect all of them and then choose the oldest (for example) 50 and see if they install on their own.

  Sometimes do fall off a long list of updates and try to install more small pieces may help them to install.

  Is not sure, but its worth a try as a first shot.

  (I know what you mean though issues of update.) It makes you wonder what's going on sometimes :-()

  If this does not help, is there required failure account error codes?

• Cannot install driver for Canon selphy cp720 on Windows 8

  Cannot install the driver on windows 8

  I was indeed able to correctly install the driver Windows 7 on Windows 8.1 (x 64). I downloaded the V4.0 - German pilot (since it's my native language) page of Canon and used Compatibility Settings (Windows 7 + admin) Support and the executable installed the driver without worries. After the Installation of the printer showed normally and I am able to print photos using Version 8.1 Windows of the guns 'ImageBrowser Ex' (which I installed in front, requiring "Run as Administrator" too, otherwise indicating a failure during install).

• Error code: 8024002D (cannot install updates for Microsoft Works 9.0)

  Tried to install this security update, however it asks to insert a disc of Microsoft works.  I looked across the disks that came with my computer and it is not one for Microsoft Works.

  Error code: 0x8024002D
  means - a full-file patch has failed because the source was necessary

  Error message when you try to install updates on the Microsoft Update or Windows Update Web site: "0x8024002D".
  http://support.Microsoft.com/kb/958041

  Without a disk not much you can do.

  TaurArian [MVP] 2005-2011 - Update Services

• Vista - Error Code: 646 (cannot install KB2092914 & KB2277947)

  MICROSOFT WORKS 9 (KB2092914) AND SECURITY UPDATE 2007 MICROSOFT OFFICE SYSTEM (KB2277947) HAS NO UPDATES ERROR: 646

  Here is an article with a fix for updates, get the error code 646 (mainly Office updates):http://support.microsoft.com/kb/2258121.

  If this does not work, try the Windows Update Agent to:http://support.microsoft.com/kb/949104/.

  If this does not work, try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  Also read and execute the steps of http://support.microsoft.com/kb/971058.

  If this does not help, please transfer your question in Forum Windows Update:http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where updates experts will be happy to help you.  Please post with the information requested here:what to post in the Windows Update forum

  I hope this helps.

  Good luck!

  Try to download and install manually by download on your desktop and install them one by one. Insert the number of KB to get updates on the right and choose the one corresponding to your version of Vista:http://www.microsoft.com/downloads/en/default.aspx.  If the error persists, temporariliy disable UAChttp://www.howtogeek.com/howto/windows-vista/disable-user-account-control-uac-the-easy-way-on-windows-vista/ and your security software and try again and see if that helps.  If this isn't the case, re-enable the programs before you continue.
  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot install Need For Speed: Shift 2 Microsoft Visual C++ Runtime Library Assertion failed!

  Original title: MsiExec install problem.

  ---------------------------
  Microsoft Visual C++ Runtime Library
  ---------------------------
  The assertion failed!

  Program: C:\WINDOWS\system32\MsiExec.exe
  File:.\CaCheckDiskSpace.cpp
  Online: 293

  Expression: 0

  For more information on how your program can cause an assertion
  failure, see the Visual C++ documentation on asserts

  (Press Retry to debug the application - JIT must be enabled)
  ---------------------------
  Abort Retry Ignore
  ---------------------------

  I am trying to install the new Need For Speed: Shift 2 and what is happening.

  What should I do?... I checked the installation on other computers, and it works, it's just my computer I guess.

  Thanks in advance ():

  Click on the link below to view the titles of Need for Speed that show to be compatible with Windows 7. It may not be a list complete, so you need to check on the manufacturer's website.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=need%20For%20Speed%3A%20Shift%202&page=1

  If it is not compatible, you can try and do a right click on the seutp.exe or .msi and select 'run as administrator '.

  If the program is not compatible, then you try to install and run the program in compatibility mode.
  Use the following steps:
  (1) right click on the program
  2) click Properties
  3) click on the Compatibility tab
  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If you are running Windows 7 Professional or Ultimate version, install Windows Virtual PC and Windows XP mode (http://www.microsoft.com/windows/virtual-pc/default.aspx) and run your software in Windows XP.

  If you run Windows 7 Home Premium, you cannot run Windows XP mode, but you can try VirtualBox (www.virtualbox.org) or VMware Player (www.vmware.com), or any other 3rd party software virtualization and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.

  I hope this helps.

  Marilyn

• Cannot install drivers for HD Audio win 7 64 Pro Windows default for generic HD driver

  Hi all

  I pray that someone can enlighten me as to how to install the correct audio drivers HD in Win 7 Pro instead of generics.

  The motherboard is an Asus Rampage Extreme and the sound card is a PCIe that accompanies the Board of Directors. The manual calls what it a 'card SupremeFX X - Fi' my system is a dual boot with XP on another partition, the sound works fine, XP, with all the extras, I need.

  If I go to Device Manager and remove the existing driver, and then when I try to install the ones I want, I get a message saying ' cannot find a device supported on this machine. "and the installation program quits.

  Of course when I reboot 7 wants to reinstall what he thinks is right. I'm at square one!

  Once the proper drivers are installed, I can then install the Creative Sound Launcher located in the Tools menu. It gives me a graphic equalizer, a Crystallizer and many other controls for the sound card. I can install these items listed, but none of them will any work without the correct driver.
  They have simply open and refuse to work saying "Device supported by this application is not found on this computer."

  I need a way to install the Asus / drivers Creative instead of the 7 seems to think are "correct."

  Nowhere for the MB manual called the card its a 'creative', but it is quite possible that the software package that comes with it has creative name on it in the world.

  A search of the site Creative shows no drivers for a card with the name that I mentioned above.

  Asus forum do not know more so here!

  Thank you all in advance!

  The dual boot is your problem. Why do you always need XP?

  And you're going to have things the wrong way!

  You need specific drivers XP on this partition and specific drivers W7 on that partition.

  See you soon,.

  Jerry

  HI Jerry,

  Thanks for the reply. I don't know how I mislead you with my ad. I said that the sound is FINE under XP it's W7 who "was" that is rampant in me.

  I eventually found the drivers from the Asus site and program utility that controls the different things like the EQ and others. Note that some of them were not in the right directory and I would have never thought to look under the heading where they have resided!

  I use XP because I have so much software that doesn't work on 7. I am also on disability and can't afford to start replacing and material. At the moment the dual boot is a solution very, I see using a virtual machine in W7.

  Problem solved, I had needed was someone to Asus who has understood my dilemma.

  See you soon

  J T

• Cannot install drivers for xbox 360 wired controller.

  Original title: How can I install my controller wired correctly?

  I'm trying to install the drivers for my xbox 360 wired controller, that I bought from Gamestop on my Toshiba Qosmio x-870 running windows 7 64 bit. When I plug the controller into the usb port, the drivers are automatically downloaded, but for some reason any cannot be installed. I tried the driver downloaded from the Microsoft Web site software. I also tried to uninstall the controller and try again. Any advice?

  Try the controller on another computer and see if it works, or take the controller back and exchange it for another.

  I have one on my computer and installed Windows 7 drivers automatically when I plugged the controller works fine.

• Cannot install drivers for Deskjet 3650 in Windows 7 XP

  I have a HP Deskjet 3650 which is connected through the USB port on my primary computer running Windows 7.  I can print without problem, I have problems sharing this printer with 2 other computers running Windows XP.  I downloaded the drivers for XP and excerpts on the Windows 7 computer.

  On the properties of the printer HP Deskjet 3600 series, I clicked on the sharing tab.

  Share this printer and rendering of printing on client computers are both checked.

  When I click on additional drivers, only X 64 is checked and said yes less installed.

  The two other options (Itanium and x 86) are both unchecked and say no less installed.

  I tried x 86 control and clicking on OK.  Then I am asked to install print drivers and browse to where are printer drivers.  I navigate to the 3600, enu, pilots, win2k_xp folder and see hpf3600k.inf when I click Open, then select OK, I get a selected printer driver not found error that indicates the specified location does not contain the driver for hp deskjet 3600 series (BOBO) on the architecture of processor required.

  On one of the XP machines, I installed the printer software and am not able to print if I physically plug the printer on it.

  On another XP machine, I have installed the printer software, but I download and extract the drivers.  When I click on the Add Printer Wizard and select the printer on the network, it tells me that I'm about to connect to a printer on the computer Windows 7 and says that it will automatically install a print on my machine driver.  I click Yes to allow him to continue and he told me that the server for the hp deskjet 3600 printer doesn't have the installed printer driver and I can click OK to search for the correct driver.  I click OK and navigate to the folder I extracted the drivers to and see that hpf3600k.inf is located in the folder and click OK and I get a window of driver error install that says that Windows cannot locate a suitable printer driver.  To help locate and install a suitable driver, contact your administrator.

  So, it seems to me that the driver that I downloaded on the site of hp for Windows XP is not the correct driver, am I wrong here?

  How can I get this printer to print on all 3 computers work without having to move from one to the other.  The printer must be physically connected to the Windows 7 computer, as the other 2 are in children's rooms.

  Try the following: on the machine XP go to the printers and Faxes folder, add a local printer, printer, create a Port, Local Port, \\Computername\Printername (use the name of the actual share of the shared computer and printer), OK, and then click disk and point to the directory where you unzipped the driver XP.

  On the XP machine, you have already installed the driver do the following: go to the printers and Faxes folder, right click on the Deskjet 3650, select Properties, Ports, the port, Local port Add, new Port, \\Computername\Printername (use the name of the shared computer and printer), OK.