Cannot install Paintbrush program on the computer.

Similar Questions

• Cannot install old programs insce change computer Windows 7

  I have a lot of games and programs that are not installed on my computer.   I have a new Windows 7 and slowly tried to reinstall many of my programs and games.  For the most part, I get the message is not Compatible with this system.  Contact software manufacturer.  If I knew that this could happen I have would have never updated to Windows 7.  I tried the resolution of compatibility issues, but even with that, I can not install this program.

  You have several options.  First, you can upgrade the programs if there are compatible with Windows 7 versions.  Second, you can try to install in compatibility mode.  Third, you can install XP Mode if you have the version professional, enterprise or ultimate edition of Windows 7 and can live with the graphs (color resolution and 16 bit about 900 x 768).

  Good luck.

• Cannot install Windows 7 on the computer

  Hi my name is Mauricio Osorio, recently, I tried to install Windows 7 on my computer, but it does not work, then I tried to re - install my Windows 8.1 license, but my computer has two drives, all first it's a ssd (Solid disc) and the other is sata, the most common of the disc type. My problem is: I don't know how to use this because it is so small (25 GB) ssd drive, but it is really fast, I tried to install Windows on it, but is so small and it does not work. What should I do?

  If as you indicate the SSD is small it almost certainly was not used as a disk operating system, but as a buffer high speed for the main SATA drive.

  The factory restore should recover the disks in the correct way before you tried to install Windows 7, you have created the.

  If you want to set this function yourself then how exactly depends on the chipset. With the driver Intel Smart Response Technology, you will need to install Windows on the SATA drive then in the driver control panel define the SSD as its buffer.

  http://www.Intel.com/content/www/us/en/architecture-and-technology/smart-response-technology.html

• Cannot install windows 7 on the computer hp laptop 15 r014tx

  I bought 15 HP r014tx windows 8.1 pre installed I want to downgrade to windows 7 but I can't install it. Please suggest any method to install it. If anyone has the same laptop and install windows 7 Please suggest...

  Hello

  Try this

  You will need to DISABLE "Secure Boot" and ENABLE "Legacy Support" in the "Configuration of the BIOS start-up secure" on the settings page similar to what is shown below, until you try to install Windows 7.

  

  

• I INSTALLED A PROGRAM ON MY COMPUTER THAT ME GIVES A DIFFERENT FROM THAT ONE KEY TO THE BACK OF THE COMPUTER YHE. WHY? WHAT IS THE REAL KEY?

  I INSTALLED A PROGRAM ON MY COMPUTER THAT ME GIVES A DIFFERENT FROM THAT ONE KEY TO THE BACK OF THE COMPUTER YHE. WHY? WHAT IS THE REAL KEY?

  I HOPE FOR SUPPORT OF MY FRIEND FROM JAMAICA

  IT IS FASTER THAN USAIN BOLT AND MORE AMIABLE THA BOB MARLEY

  Thank you

  Computers, which are built by large manufacturers provided with pre-installed Windows are supplied with 2 two product keys:

  (A) OEM SLP: this key comes pre-installed in Windows, when it comes to the factory. This key is designed to work with the special instructions isn't on the hardware of this manufacturer. Then, when Windows was installed using the OEM SLP (in factory) Windows 7 key leans on the motherboard and he sees special instructions and activates. (that's why you had no need to turn on your computer after you brought it home)

  (B) SLP COA: it's the product key that you see on the sticker on the side (or at the bottom, [or in the battery compartment]) of your computer. It is a valid product key, but must be used only in certain situations (for example, if the OEM SLP key stops automatic activation for a reason any). The key must be activated by phone. (Note: all manufacturers that use the SLP OEM system are bound by contract to include a certificate of Authenticity sticker (COA), which has a COA SLP key, on the computer)

• I received 5 Lightroom as a gift a few months ago and cannot install it because my new computer doesn't have a CD player. Instead, I downloaded the demo and hoped I could enter a product key, but was never invited. Now, the trial has ended and I still

  I received 5 Lightroom as a gift a few months ago and cannot install it because my new computer doesn't have a CD player. Instead, I downloaded the demo and hoped I could enter a product key, but was never invited. Now, the trial has ended and I still have not been invited, just denied access. What should I do to go on the record as owning this software?

  Hi junenfante,

  Please see the download links where you can download the installer and activate the product using the serial key.

  WIN: Adobe - Lightroom: for Windows

  MAC: Adobe - Lightroom: for Macintosh

  Kind regards

  Sheena

• Currently, I run the design and the Web Premium CS6 on a first generation MacBook Air and want to buy a new MacBook Pro. How will I know if I can install my programs on the new Adobe computer? Because I know that there is some sort of limit.

  Currently, I run the design and the Web Premium CS6 on a first generation MacBook Air and want to buy a new MacBook Pro. How will I know if I can install my programs on the new Adobe computer? Because I know that there is some sort of limit.

  Also, I had to install the software twice on my computer before because I had to restart the computer. I don't know if this affects the limit.

  You are allowed to have two facilities activated, so it shouldn't be a problem with facilities to work on both machines.  If by chance you somehow tied up two activations for a machine you can have Adobe support help solve this cat thrue.

  Serial number and activation support (non - CC) chat

  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• Cannot install creative cloud to your computer.

  Cannot install creative cloud to your computer. I paid for the plan for photographers: Lightroom and Photoshop for 299 rubles. I tried to restart and update, but nothing happens. A month passed, and nothing works. I am very angry, because for a month, I have not a single day has worked for these programs.

  You should check to see if your computer meets the system requirements for the software.

  Creating cloud - https://helpx.adobe.com/creative-cloud/system-requirements.html

• RAM INSTALLED BUT NOT START THE COMPUTER

  MR. PRESIDENT IS RESPECTED,

  I HAVE G6-2312AX HP PAVILION NOTEBOOK COMPUTER. WINDOWS 8 IS INSTALLED IN. 4 GB OF RAM ALREADY THERE. NOW, I WANT TO ADD 4 GB MORE. I BOUGHT 4 GB OF RAM DDR3 1600 MHZ AND TRIED TO INSTALL IT. BUT THE COMPUTER DOES NOT. KINDLY TELL WHAT TO DO. JAI HIND

  It seems that if you did not put in a pair of identical bars or has not used the memry guaranteed compatible modules. You cannot use the module that was already there, unless you add is identical in every respect.

  Use only guarantee modules in identical pairs if you want your upgrade memory to work right the first time.

• Problems to install a program - error: the VC Redist 2005 Sp1 vista installation

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • Hello

    I'm tryring to install a program on the Motorola Web site.  This is the link to media from Motorola (MML).  I download the file but it will not be installed.  The following error keeps coming back:

    The VC Redist 2005 Sp1 installation failed. The installation program will now stop.

    I tried to install VC 2005 Sp1 Redist and VC Redist 2008 and I can't always install it.

    I hope someone can help.

    You have problems with programs

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem
  Hello
   
   
  1. where did you download the Package redistributable Microsoft Visual C++ 2005 SP1?
  
  Method 1.
  Download the package from the link below and then install the package and check.
  Microsoft Visual C++ 2005 SP1 Redistributable Package (x 86)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=200b2fd9-AE1A-4a14-984d-389c36f85647&displaylang=en
   
  Method 2.
  If the problem start the computer clean start State and then attempt a re - install and check.
  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I get an 80070663 error when installing an update on the computer.

  Original title: impossible to install KB2687499 on Windows Vista

  The microsoft Installer Update continues to detect sequences of security update Microsoft Office (KB2687499) 32 - bit Edition if necessary to install on my system and continues to fail.  So I downloaded the update manually, but when I run it, I get the message: "Please wait while the update detection is to be run." and then I get the message "an error has occurred during execution of detection."  I called the Help Center (SRX1193068976ID) and gave them the windows update 80070663 error code.  The representative sent the following links:

  < your="" answer="" tech="" thought="" you="" might="" find="" these="" links="">
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/error-code-80070663/869d5ea6-9892-4273-A43D-26ee4f42efe2

  http://support.Microsoft.com/kb/913754

  I followed all the instructions and I can not yet solve the problem.  Any help would be greatly appreciated.

  Thank you
  PAM

  Hi Pam,.

  Thanks for posting your query in the Microsoft Community.

  You have a problem with the installation of an update on the computer. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.

  Please answer these questions-

  (1) what is the exact error message?

  (2) you are able to install other updates on the computer?

  (3) have you made changes on the computer before the show?

  I would like more information about the issue.

  Method 1-

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  Back up the registry - http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  Method 1 and 2 require changes need to be made in the register. You must back up the registry before you proceed.

  I would have you look at the article-

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2-

  I would have you look at the article-

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Note: The Chkdsk scan will try to identify and repair bad sectors on the hard drive. All the data on these areas could be lost in the process. The computer can also enter a no start condition.

  Let us know if you have other questions about Windows in the future. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

  Thank you.

• Cannot install new programs as "system administrator has set policies to prevent Installation.

  It comes to my computer at home, not on any network.  More and more, I get this error message.  There must be an easy fix.  Hope someone can show me the way... Thank you... Marv

  Hi MarvReinke

   

  1. you are the administrator of the computer?
  2 do you have standard user permissions to install programs?

  It seems that this administrator has blocked installation of programs on the computer. (UAC) user account controls have been set accordingly. If you are the computer administrator, you can try to connect as an administrator and see if you can install the programs correctly. You can also try to change UAC settings to solve the problem.

   

  You can check the links below for more information-

  http://Windows.Microsoft.com/en-us/Windows7/what-is-user-account-control

  http://Windows.Microsoft.com/en-us/Windows7/what-are-user-account-control-settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-change-the-behavior-of-the-user-account-control-message

   

  I hope this helps.

• Cannot install Windows updates and cannot install new programs due to Error Codes: CODE C355, Code 80070652

  Original title: C355 Codes error: CODE, Code 80070652

  I'm unable to download the updates of widows and also have problems to install new programs.  The error is in the topic above and also get a screenshot that windows installs another program that must be done first when don't want to install anything.

  Hi Whitefish50m,

  (1) what programs are you trying to install?

  (2) how long have you been faced with this problem?

  Please provide the number of up-to-date Knowledge Base that you are trying to install.

  Method 1: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: You can follow the steps described in the article below

  Error message when you try to use Microsoft Update or Windows Update Web sites to install updates: "0x800B0100.

  http://support.Microsoft.com/kb/956702

  Method 3: You can also view the steps mentioned in the link below

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

• UniBlue wants to install a program on my computer, I don't want to. I can't get rid of this intrusive demand.

  UniBlue wants to install his program on my computer. I'm not interested, but I don't know how to get rid of this intrusive program.

  A program installs only if you download the program, or may be due to an infection.

  Scan with these two free apps

  http://www.Malwarebytes.org/products/malwarebytes_free/

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• The add-on &lt; partner name &gt; - cannot install: impossible to validate the license online.

  Hi, I get the following in the creative cloud application error message:

  Installation impossible, impossible to validate the license online

  Error message

  The add-on < name of companion - > cannot install: impossible to validate the license online.

  
  

  
  Also, when I try to use the libraries in Adobe Illustrator, I get the following message is displayed:

  Sorry, we could not connect to the server

  How can I solve this problem?

  Thank you!

  Jamel.

  This error indicates usually that one of the following problems:

  • You are not connected to Creative CC Cloud Desktop App and/or Adobe site with the same Adobe ID modules. Please first make sure that you are connected to the Adobe website modules (top-right) and the desktop application CC (high button on the page of good settings, preferences, account) with the correct ID.
  • More than one user is logged in your Adobe software on your computer using an Adobe ID different from yourself, or indeed you have more than one Adobe ID that you used to connect to. It can also be as a result of general license file corruption. Please clear your browser cache.
  • You are behind a firewall that blocks our license server calls. Please try to disable your firewall, or try again in safe mode.