Cannot install the Flash updates or drive

Similar Questions

• When I try to install the Flash update he asks a password that does not close and I can't install

  When I try to install the flash update I get a request a password that is not out to please help

  Hello

  You use Windows or Mac computers?

  If you use a Mac, it's the Mac OS which is asking password and not Adobe Flash Player. Please follow what userid & password I need to install Flash Player?

  -Varun

• Satellite C50D-A-133 with Win7 - cannot install the USB 3.0 driver

  I Satellite, C50D-A-133 with Win 7 x 64 and cannot install the usb 3.0 drivers.
  I download the driver from the support site of toshiba for usb 3.0 for win7 x 64 and it starts to install the driver, but in the end it saids...
  Windows found driver software for your device but encountered an erroe trying to install it.
  AMD USB 3.0 host controller
  The system cannot find the specified file.

  I try to point the location of the driver but same error.
  Other drivers installed ok only gives error

  I ve downloaded and unzipped the driver and everything seems OK.
  As far as I know laptops equipped with platform AMD isn't chipset driver and after installing display driver must be installed USB driver.

  Try to download it again and start the installation manually.

• Error code: 646 (cannot install the Office updates)

  Original title: WindowsUpdate_00000646.

  Update of security for Microsoft Office System 2007 (KB2289158)

  Update of security for Microsoft Office PowerPoint Viewer 2007 (KB2413381)

  Update for the filter of junk e-mail in Outlook 2007 (KB2443839)

  I get the message of theses errors trying to do these updates. Help, please?

  Hi caky51,

  You are able to correctly install the other updates?

  You can follow this link & check if it helps.

  Code error '0 x 80070646', '646', or '1606' when you try to install the Office updates

  Hope the helps of information. Please post back and we do know.
  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 - error Code: 0 X 80070641 (cannot install the Office updates)

  Hello

  I had problems with updates of Office 2007 security for some time.

  the error is usually:

  Log name: System
  Source: Microsoft-Windows-WindowsUpdateClient
  Date: 2010-09-17 12:09:01
  Event ID: 20
  Task category: Windows Update Agent
  Level: error
  Key words: Failure, Installation
  User: SYSTEM
  Computer: Odin1
  Description:
  Installation failure: Windows failed to install the following update with error 0 x 80070641: update of security for Microsoft Office Outlook 2007 (KB2288953).
  The event XML:
  
   
     
      20
      0
      2
      1
      13
      0 x 8000000000000028
     
      254092
     
     
      System
      Odin1
     
   
   
      0 x 80070641
      Update of security for Microsoft Office Outlook 2007 (KB2288953)
      {B142AE09-D79A-47D3-9DD6-4AE3FC3FAF69}
      100
   
  

  Yesterday an Open Office installation failed and starts a BSOD on Microsoft Office Accounting 2009 is no longer.

  The problem is reported as being:

  Signature of the problem:
  Problem event name: OfficeAccounting2
  Signature of the problem 01: 4.0.3610.0
  Signature of the problem 02: BadImageFormatException
  Signature of the problem 03: reminder
  Signature of the problem 04: .ctor
  Signature of the problem 05: b35d386f
  Signature of the 06:809 problem
  Signature problem 07: 1
  OS version: 6.1.7600.2.0.0.256.48
  Locale ID: 2057

  More information about the problem:
  LCID: 2057

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  Microsoft Office Accounting gives only the option to uninstall (reinstall is greyed out).

  I tried to repair Office 2007, but it fails.

  The system is Windows 7 Pro 64 bit.

  I searched high and low but have been unable to find out very useful on error 0 x 80070641.

  I'm starting to think that a repair (or full) install is necessary.

  Help!

  PS:

  It does not help:
  MSIEXEC /Unregister
  MSIEXEc/regserver

  Slaughter of the Windows Installer Service does nothing.

  Suspension of Kaspersky Internet Security does not seem to do anything.

  Hello

  It seems that there is a problem with the update of Windows. Click on the link below.

  How to resolve problems connecting to Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/818018

  Follow the steps mentioned in the article below.

   

  Method 1:

  I suggest to reset the Windows Update components and then try to install the update on the system and check if you are able to install it or not.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us

  Method 2:

  I suggest you download the update from the Microsoft site and then install it on the system, but before that, uninstall any old version of the update is installed on the system (KB2288953) and then I you suggest to the clean boot the system and then install the update on the system.

  Remove an update

  http://Windows.Microsoft.com/en-us/Windows7/remove-an-update

  Step 1:

  I suggest do a clean boot and check if you are able to install windows updates. To perform a clean boot follow the steps mentioned in the link given below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you have finished installing, follow step 7 to start the computer in normal startup.

  Step 2:

  Download the update from the link below.

  Update of security for Microsoft Office Outlook 2007 (KB2288953)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=6009d507-135C-4CE8-A830-925134f214dc&displaylang=en

  For more information on the update click on the link below.

  MS10-064: Description of the update of security for Office Outlook 2007: 14 September 2010

  http://support.Microsoft.com/kb/2288953

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Cannot install the Office updates

  There are 11 so far that cannot be updated.  I tried one at a time, but still does not work.  What is the cause?

  I will list the updates here:

  Update of security for Microsoft Office Excel 2007 (KB978382)

  Update of security for Microsoft Office Outlook 2007 (KB972363)

  Update of security for Microsoft Office Publisher 2007 (KB980470)

  Update of security for the viewer Microsoft Office Visio 2007 (KB973709)

  Update of security for Microsoft Office System 2007 (KB972581)

  Update of security for Microsoft Office System 2007 (KB974234)

  Update of security for Microsoft Office System 2007 (KB978380)

  Update for Microsoft Office InfoPath 2007 (KB976416)

  Update for Microsoft Office OneNote 2007 (KB980729)

  Update for the junk e-mail in Outlook 2007 (KB981433) filter

  Update for Microsoft Office System 2007 (KB981715)

  * Title *.
  try to publish on Windows Vista, but it keeps posting to Windows 7... Anyway, I was not able to download Windows updates for some time.

  Each Office Update download here:

  For example: http://www.microsoft.com/downloads/en/results.aspx?freetext=KB978382&displaylang=en&stype=s_basic

  Once you have downloaded the somewhere, you can locate on your hard drive, manually install the same.

  Windows Update forum is the same for Windows XP, Vista & Windows 7 so no matter which category you post from, they all end up here it is important to inform the operating system that you use, which in your case you mentioned Vista.

  TaurArian [MVP] 2005-2010 - Update Services

• Cannot install the MFP M177fw printer driver

  I try again to install the driver and follow the instructions at the bottom of the link but still cannot install. I start small windows and even to create a new user, but can not run.

  http://h30434.www3.HP.com/T5/printer-software-and-drivers/not-able-to-install-a-driver-for-MFP-M177f...

  I use windows 10 try to connect with the wireless option that the printer is in another room. The printer is connected to the router and ping is passthrough. But during the installation, the installer cannot find the printer. I will provide the number IP Installer but nothing helped.

  Can I do to install? Thank you.

  Rgds,

  Tony Thk

  Hi @TonyThk,

  Thank you for showing interest in the Forums of HP Support!

  I understand that you are unable to install the printer wireless. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I see that you have followed the steps in the post you mentioned. In addition to these steps, try the following.

  Tips for a successful wireless connection:

  • What type of encryption are you helping? HP recommends WPA or WPA2.
  • Using a unique network name (SSID).
  • Avoid using filtering by Mac address of the router.
  • Make sure you have 802.11 g active.
  • The printer cannot connect to the 5.0 GHz network. If you have a double router broadband, the 2.4 GHz and 5.0 GHz network names are not the same. Rename the 5.0 GHz network.
  • Don't hide your SSID (network name).
  • Change the router channel fixed wireless as the 1, 6 or 11, who less than traffic.
  • You have a switch or an extra router?
  • Do not use a network of comments (SSID).
  • Disable UPnP on the router.
  • Set the router to 20 Mhz only, or 145Mbps depending on the router.
  • Update the firmware on the router.

  Disable IPV6 in front panel of the printer menu:

  1. Configuration menu
  2. Network configuration
  3. Network services
  4. IPv6, select disabled.

  If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  To assign the static IP address, use the following steps as a guide.

  1. Print a Page of Network Configuration menu of the printer front panel. Note the IP IPV4 of the printer address.
  2. Type the IP address in the browser to bring up the SAP.
  3. Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
  4. Select Manual IP.
  5. Enter your IP address manual (192.168.0.232)
  6. Enter 255.255.255.0 for the subnet mask, except if it is different.
  7. Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
  8. Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
  9. Click on apply.
  10. Restart the router, the printer and the computer.
  11. Test print.

  Ensure that your router and firewall do not block these ports.

  • UDP ports: 427, 137, 161
  • TCP port: 9100
  • Card photo upload:
  • UDP ports: 137, 138, 427
  • TCP port: 139
  • Scanning:
  • UDP port: 427
  • TCP ports: 9220, 9500
  • The HP device status:
  • UDP port: 161
  • Sending faxes:
  • UDP port: 427
  • TCP port: 9220
  • Installation of the HP device:
  • UDP port: 427
  • Ports of Web Services:
  • UDP and TCP: 80, 443, 5222 and 5223
  • Hello Ports:
  • TCP and UDP: 5353 and 5297, 5298

  Update the firmware of the printer:

  • Click here to download and install the update of the firmware of the printer.
  • Make sure that the printer is connected directly to a wall outlet (do not use a bar or a surge protector).
  • What were the results when you ran the printing and scanning doctor (she print or scan, error messages)?
  • Try to install the USB printer.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Dell laptop, cannot install the drivers for USB drives.

  Although the fans more of my family and the power of Google, I can not solve this problem is to have my sister.

  Each USB key she inserts into his laptop computer are, although recognized, never installed.  For example, when I install in another computer USB flash drive, the typical action should be that either the system operating rises automatically the drive to a letter on my computer, or invite an Assistant saying that it will try to install the drivers for the flash player and do it automatically.

  When I insert a flash drive into this laptop, however, it will prompt me to find the location of the folder where the drivers for the USB key is installed.  When I ask for an alternative, he will try to find it through Windows Update for drivers, then answer he found nothing.

  I tried to assign the same flash as a generic device drive in Device Manager, but nothing helps: the flash player still will not mount in my computer properly.  Windows Update, moreover, indicates that the system is up-to-date.

  Any ideas on how to fix this, so that the laptop in the world will recognize volumetric flash drives and devices entry without asking for the location of the driver?  That is, a system of 'plug & play' with all USB devices?

  "Windows Update, moreover, indicates that the system is up to date."

  You get the manufacturer's operating system hardware drivers: Dell.

  http://support.Dell.com/support/downloads/index.aspx

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  See you soon.
  Mick Murphy - Microsoft partner

• "Cannot connect", cannot install the Flash Installer

  I constantly get this error message and can not install Flash. After that the installation program starts, I get just the message, "the connection has failed. Click on the Finish button and restart the installation process. »

  Windows 8.1

  Firefox (cannot find the version #, but it is the most common)

  Thank you for the reply, Maria, but I've found a workaround.

  The Mozilla site, I found another link to download Flash for Firefox, it worked without any problem.

  If someone has the same problem, the link is on this page:

  Flash Plugin - keep up-to-date and solve problems. Firefox help

  Scroll down to "Install or update Flash", step 3 it below is a small box with a link for those who have trouble with the normal link.

• 0 x 643, error code 0 x 80070643 - cannot install the new update

  Hello

  Make me

  0 x 643, error code 0 x 80070643

  whenever I try to run Windows Update. It says "check for updates", so I press it, but then he comes back with "to check the updates you must first install an update for Windows Update" - I press 'Install now' and she closes and opens again say it cannot install it or goes back to the message "check for updates".

  I tried both methods in the http://support.microsoft.com/kb/KB976982 article, but it is not fixed.

  What can I do now?

  Thanks in advance

  Rachel

  Hello

  Make me

  0 x 643, error code 0 x 80070643

  whenever I try to run Windows Update. It says "check for updates", so I press it, but then he comes back with "to check the updates you must first install an update for Windows Update" - I press 'Install now' and she closes and opens again say it cannot install it or goes back to the message "check for updates".

  I tried both methods in the http://support.microsoft.com/kb/KB976982 article, but it is not fixed.

  What can I do now?

  Thanks in advance

  Rachel

  Hey RachandGarry

  reqd the below information from microsoft about this error code 643

  http://support.Microsoft.com/kb/923100

  If this does not work, you will have to repost in the forum update windows for more tips

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  Walter, the time zone traveller

• Computer crashes and hangs and cannot install the security updates

  Original title: problem with a multi-card driver

  Hi my pc says I have a problem with a multi card driver. I don't know what that means. How to fix it. I have windows 7 and a dell Inspiron 1545. the pc crashes and freezes and it does not accept dates for 64-bit security. Please help thanks

  Hi Lisa,

  Thanks for posting your query on the Microsoft Communities.

  It might be difficult when things don't work the way it should be on your computer. This problem may occur for corrupted or missing drivers or due to conflict of third-party application. However; We will try to refine to see what is causing this problem and try to fix it.

  Please help me with the following information related to this issue:

  1. Do you have a message when you say "a problem with a multi card driver?
  2. When exactly the computer crash or freeze? It is tempting to access a particular application?
  3. Do you mean that you are not able to install updates when you say "he does not accept the security updates"? If so, you receive error message?

  Follow the steps in the following link and check:

  8.1 Windows, Windows 8 or Windows 7 hangs or freezes

  http://support.Microsoft.com/kb/2681286/en-us

  See the section on Windows 7

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  If you are not able to install Windows updates, I suggest to run the Windows Update Troubleshooter

  which will automatically fix some common problems with Windows Update.

  Open the Windows Update troubleshooting tool

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  Make sure that you install all the latest version of the device of your computer manufacturer site driver update. Consult the following link:

  http://www.Dell.com/support/home/us/en/04/product-support/product/Inspiron-1545/drivers

  Please respond with the required information and the status of the question to help you further.

• Cannot install the Trusted Platform Module Driver / software

  I am not able to install the driver of the TPM secure and so I'm not able to install the TPM software... I have a satellite u200, and it's on my tools and utitilities cd. Installation always says "Trusted Platform Module not found" someone at - it the same problem?

  Hello

  Have you checked the BIOS settings? Maybe the TPM must be enabled first.

• Cannot install the security updates two, KB2479628 and KB24855376

  Window 7 32 bit, Toshiba Satellite L350D, have 2 updates security who refuse to install, KB2479628 and KB24855376, have tried the search found no answer. No change on my computer, open use F - Secure viras check and firewall

  Hi rivercrouchman,

  Please let us know the error returned when you try to install the updates.

  Also, please see the article after some troubleshooting for your question:

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Cannot install the security update

  kb973565 update of security guard gives me error 800130100 I need signature How do I do it

  Error codes are normally 8 digits.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/971058

  How to reset the Windows Update components?

  http://www.Microsoft.com/downloads/en/default.aspx

  Also, try to put the KB numbers in the search at the above link > then download them manually.

  If the above does not solve it:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon

  Mick Murphy - Microsoft partner

• Vista - Error Code: 80770643 (cannot install the Office updates)

  I tried to set Office Source Engine Manual. Then tried to install, always was error.

  I manually deleted Net Framework 1.0, 1.1, 2.0, 3.0, and restarted and downloaded 3.5.Then .NET Framework 3.5 SP1 .NET Framework 1.1 and Net Framework 1.1 SP1.restarted. Installed in good condition and checked out restrted then updates downloads and download Net Framework 4. rebooted and tried to download the 4 updates for Office 2003. Yet received Werror!

  I downloaded the .NET Framework cleanup tool. He ran, then rebooted, installed Net Framework 3.5SP1, 1.1 and 1.1 SP1. Resarted and update downloaded for Framework 4. updated and tried to install updates for Office 2003 Same error.

  I get this for the fourth update, installation, 1/2 way through what the error message u [p.

  I tried every thing Word for word, no luck in Help topics.

  Thanks in advance

  Doug

  http://support.Microsoft.com/kb/KB976982

  You receive the error 643 0 x or 0 x 80070643 when you try to install the updates of .NET Framework by using Windows Update or Microsoft Update

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/971058

  How to reset the Windows Update components?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not solve the problem, repost in the appropriate Forum:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner