Cannot install the framework microsoft net 3.5 to the 32-bit version of vista

Similar Questions

• Installed the 64 bit version of vista, but need to 32-bit. Help, please!

  My Vista 32 bit was removed from my Sony Vaio.  I tried to use a disc of Vista, but after I loaded it, I realized it was a 64-bit version of Vista.  The screen is filled only partially.  I don't have a backup for 32-bit Vista disc, then how I would go from 64-bit to 32-bit Vista so I can have my full screen back?

  It is your option to reinstall Vista 32 bit.

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Win 7 thinks that I have a 32-bit system when I try to install the 64-bit and he thinks I have the 64 bit when I try to install the 32-bit version

  Win 7 thinks that I have a 32-bit system when I try to install the 64-bit and he thinks I have the 64 bit when I try to install the 32-bit version
  I know I am running vista 64-bit, it states that in the system properties

  I have a HP Pavilion A6700, when I went to upgrade to Vista 64 bit to win7 64-bit (win7) said I can't upgrade an OS to a 64 bit one, so I tried the other way and tried to install the 32-bit 32-bit version, and then I got the msg, you cannot pass an OS 64-bit for a
  32 bit one, I looked in the system properties and it is running vista 64-bit
  Other than a clean install what can I do to improve?
  and if I do a clean install which are the files I need backup so I don't lose my data?

  Make sure you have the latest Service Pack for Windows Vista installed. Which edition of Windows Vista 64-bit you're running and what edition of Windows 7 you are trying to upgrade to?

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

  In addition, run the Windows 7 Upgrade Advisor, it will scan your system and provide a report telling you if your PC can run Windows 7, and if there is no compatibility problems with your hardware or programs.

  Windows 7 Upgrade Advisor:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15&displaylang=en

  Also make sure that your BIOS is up to date. Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

• Do you need to uninstall the 32-bit version of firefox to install the 64-bit version?

  I tried to install the 64-bit version of Firefox and it seemed just overlay the 32-bit version. Is my 64-bit version now or still the 32? I don't know how to say or how to put in the 64 bit one if it did not work.

  You have posted here with the 64-bit version of Firefox 43.

• Is it possible to install the 32-bit version of WMP on my 64 bit system

  Original title: Windows Media player 32-bit on a 64 bit system

  Hello

  I was using my PC for a year now. I like to use Windows media player, but it is the 64 version and does not have the visualizations that I see on the screen. I think that the 32-bit visualizations and I was wondering if I could install the 32-bit version of WMP on my 64 bit system? Thank you very much for the research.

  Colin

  My system specs

  Windows 7-64 bit (Service Pack 1)
  ASUS P9X79 - THE
  Intel Core (TM) i7-4820 CPU @ 3.70 3.70 GHz GHz
  AMD Radeon R9 290 X series
  SoundBlaster Z
  8.00 GB of Ram

  Selecting in the plugins tab doesn't do nothing - it's just for the management of plugins.   Example (as you can see I'm also on 64 - bit).

  

  Now if you really want to CHOOSE a Visual, you must click on the right in the box 'now playing '.  Example:

  

• To avoid collisions: Downgrade of PSE13? Install the 32-bit Version?

  I am trying to solve the crash of text with PSE14 tool. Any chance that downgraded to V13 would fix it? My serial number will allow me to do? What happened to install the 32-bit version instead of the 64?

  I solved the problem in this thread:

  Eight years of text Tool Crash and no Solution? Really?

• I installed Acrobat 8 Professional 32-bit version and my computer is 64-bit, the program does not run correctly and I want to uninstall the 32-bit version and re-install the 64-bit version, I can't find the download of US feed for Acrobat 8 Professional,

  I installed Acrobat 8 Professional 32-bit version and my computer is 64-bit, the program does not run correctly and I want to uninstall the 32-bit version and re-install the 64-bit version, I can't find US downloading feed for Acrobat Professional 8, any suggestions

  Hello

  Please see below the link to download: -.

  https://helpx.Adobe.com/Acrobat/KB/Acrobat-8-9-product-downloads.html

• Guard installation of 32-bit version. How to install the 64-bit version?

  I am trying to install on my laptop.

  It keeps installing the 32-bit version, which will not run. It says to download the 64-bit version, but I can't select 64 bit on installation?

  Help, please

  See you soon

  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

• I just installed the package photographer on my 64-bit computer and installed the 32 bit version?

  How can I install the 64 bit version. My computer has 12G of memory.

  On a 64-bit computer, the 32-bit and 64-bit versions must be installed: 32 bits in Program Files (x 86) and 64-bit in Program Files.

  Launch the 64-bit program files application.

• CS5 only install the 64 bit version?

  I read several times (for CS4, at least) versions both 64-bit and 32-bit are installed on a 64 bit OS... so old 32-bit add-ins can be used

  I have a new 64-bit Win7 64 bit computer and I'll install CS5 as soon as it arrives on my front porch

  Given that I have no 32-bit add-ins and the 32-bit version is useless, is there a way to tell the installer to use the 64 bit version?

  John

  To answer your question, it's the readme CS5:

  "

  Photoshop will automatically install the 32-bit version of Photoshop CS5 if you're on a Windows 32-bit operating system. Photoshop will install both versions 32-bit and 64-bit Photoshop on 64 - bit systems. To install only the version of Photoshop 64-bit on a 64-bit Windows operating system, follow these steps:

  1. run the Photoshop CS5 Installer.

  2. Enter your serial number. Click on accept.

  3. on the right side of the Options Panel under the title of 64-bit, uncheck the box for Adobe Photoshop CS5. Let the "Adobe Photoshop CS5 (64 bit)" option checked.

  4. complete the installation.

  Hope that helps

  Paul

• How to install windows 7 pro, when I mistakenly installed the 32-bit version instead of the 64-bit version

  I just installed windows 7 pro.  Unfortunately, by mistake I installed the 32-bit program on 64-bit program.  now that I try to install the 64-bit, I get the error message: "this installation disc is not compatible with your version of windows.  upgrade I need the disk to correct installation.  so he said to shut down your computer and reboot the installation disc. »

  but when I reboot it just goes directly to the office.  would someone kindly give advice on how I overcame this misadventure?  I know that windows 7 pro on my computer, 32-bit version, but want windows 7 pro 64-bit version.  I still have the discs and software keys... Thank you.
  Prior to this installation, I was running 32 bit XP pro

  You'll need during cratch because there is no way to upgrade a 32 bit OS to a 64-bit version of Windows.

  Check your BIOS to make sure that your DVD drive is set as the first boot device, and then save your settings (if a change was required) and get out.

  With the 64-bit DVD in the DVD drive, restart the computer.

  Choose the "Custom" option and then delete the existing system and Windows partitions, click next to continue the installation,

  Since you enabled the OS using the 32-bit product key most likely you need to activate by phone this time.

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) clearly explain your problem to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  J W Stuart: http://www.pagestart.com

• Re: Qosmio F50 - 10M - how to install the 64-bit version of BIOS?

  Hello guys,.

  I've updated my Qosmio F50 for Windows7 Professional 64-bit by installing the scratch (deleting these VISA32bit; from formatting the partition/hard drive).

  I installed the BIOS version 2.20 update 64 bit installation process stopped saying something like: "you already have the latest version of the bios. Of course, I made the misstake install the bios with the same number of version 2.20 while I used vista, but this version was the 32 bit one.

  How can I convince the computer to accept the 64 bit version of the BIOS installed (because it seems not to recognize that it is different) and what are the special benefits from 64 to 32-bit version of the BIOS?

  Thank you for your kind replies.

  Yours,
  Starmind_1

  Hey,.

  Are you sure that you have installed the WIN32 of BIOS version if this error message appears?

  Last year I also changed the BIOS to a WIN32 for WIN64 version and it was no problem. Update worked correctly, but I did this update on the preinstalled Vista version of Toshiba.

  It works when you try the update of Vista?

• Qosmio G50 - cannot install the FM Tuner in Windows Vista Media Center?

  Can someone help me get the most out of Windows Vista media center with my new Qosmio G50.

  There is a tuner inside this laptop and I have the antenna and its plugged in. The drivers all seem to be installed but WMC tells me that I don't have the hardware to run FM stations and I can't make it work. Also, I can't record library but although I can't watch TV no problem at all.

  Someone out there have the answer?

  Hello

  Are you sure that your equipped G50 FM tuner to 100%?

  As I know a few models of G50 has been equipped with a tuner TV with antenna TV port that allows to connect a coaxial cable to this port to watch a TV program and then save.
  But as I said earlier, this feature is not included with all models of G50.

  Sorry, but I didn't find any info regarding the FM tuner.

• How to install the 32-bit version and the 64-bit version of lab VIEW 2014 SP1 in the same machine?

  I want to have both versions because my pc is 64-bit, but he can't function with

  Module LabVIEW Control Design and Simulation

  and

  LabVIEW MathScript RT module

  This funtion two apps with 32-bit lab VIEW 2014SP1

  also, in the forum, I see that it may be possible, check on question number 6

  "Q: I have 32-bit LabVIEW and LabVIEW 64 bit installed on the same 64-bit machine? ."
  A. Yes. »

  http://digital.NI.com/public.nsf/allkb/71E9408E6DEAD76C8625760B006B6F98

  Help, please

  I suspect that most of the facilities of LabVIEW on Windows consists of LabVIEW 32 bit running on an operating system 64-bit Windows (for the most part, Windows 7, 8 and 10).  As you noted, all the toolboxes have 32-bit versions, and many do not have 64-bit versions (although that is changing).  If you don't need the memory of the large model (and have the memory to support), I recommend sticking with 32-bit LabVIEW.  You will have less room for error and Confusion.

  Bob Schrede

• I can not install the 64-bit version

  I had the version of Windows 7 Professional 64 bit, but when I download flash player it downloads the 32 bits, and it sometimes doesn't work as it should. Sorry for my English.

  http://prntscr.com/4j0yv1

  http://prntscr.com/4j105z

  The Setup program automatically installs the 32-bit and 64-bit players on a 64 bit system.  You can check

  • 64-bit: C:\Windows\system32\Macromed\Flash
  • 32-bit: C:\Windows\syswow64\Macromed\Flash