Cannot install the license for the virtual wireless controller vWLC 8.1.102.

Similar Questions

• Cannot install the printer wireless with error code 0 x 00000643

  Original title: error0x00000643 on the installation of the printer

  try to install printerget wireless to the final installation and getting the error 0 x 00000643. Windows Vista 64-bit

  Hello

   
   
  Thanks for posting your question in the Microsoft Community.
  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.
  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:
  (1) did you of recent changes to the computer before this problem?
  (2) what is the brand and model of the printer?
   
  Please follow the methods and mark the question below:
   
  Method 1:
   
  I suggest you to install the printer in clean boot mode.
   

  You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Method 2:
   
  Install the latest drivers for the printer from the manufacturer's website and check if that helps.
   
  OR
   
  You can also uninstall the printer using the network browser and install it again.
   
  To do this, follow these steps:
  a. open the network and sharing Center. To do this, type Network Center and sharing in the search box and then click Network Center and sharing in the list programs.
  b. in the pane tasks, click view computers and devices.
  c. find the printer and then right click on the printer to uninstall.
  d. once the printer is uninstalled, reconnect the printer to the computer. The Plug-and-Play service begins to install the printer.
   
  Reference:
  Error message when you try to install a WSD printer on a Windows Vista-based computer after installing first attempt fails: "impossible Operation completed (error 0 x 00000643).
  http://support.Microsoft.com/kb/944960
   
   
  I hope that the information above helps you.

• Cannot install the Kodak wireless printer.

  Original title: http://windows.microsoft.com/en-us/windows8/install-a-printer

  Trying to install a Kodak printer to a computer from hp via a wireless connection and can't find the printer.

  Is this recent post offers you clues?

  Epson printer WF-2510 with wireless-"printer not connected."

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/Epson-printer-WF-2510-with-wireless-connection/5ed27221-0cc3-4725-bdd0-2a56ecd9ba65

• WinXP not reading USB floppy during installation (F6). Cannot install the ACHI storage controller driver.

  I bought a 3000 N200 with Win Vista Basic. His is not illegigble for a decommissioning of the plant, but apparently it's possible.

  At the beginning of the XP installation after you press F6, everything seems very well, that the floppy drive is read I can select the appropriate driver and program installation continues...  Drunk when the installer is ready to copy files to the hard drive, Setup stops and asks the "Intel Matrix Storage Manager" diskette in the A: drive.    The thing is that the drive is still in the floppy drive. It's as if the USB floppy drive is not connected.  What's wrong?

  I've done the disk several times different. I unplug it and re - insert the USB key.

  I can't disable the ACHI and run the XP installation very well, but the ACPI driver (or something like that) is installed.  Later, during the loading of software the program WinDVD from the Lenovo Web site does not recognize the manufacturer and stops.

  Help, please...

  nLite is my Savior. I've not finished installation, but once the installation program only is complaint not only no hard drive was present, I think that I am free to hone. I just included the AHCI driver in nLite with the chipset drivers and it seems to work...

  Later I'll post the final verdict...

• I try to install an air 320u sierra wireless card and I get an error message "could not access vb run time for custom action script. Cannot install the Manager of mobile broadband services.

  could not access vb run time for custom action script

  I try to install an air 320u sierra wireless card and I get an error message "could not access vb run time for custom action script.  Cannot install the Manager of mobile broadband services.  Any ideas?

  Hello

  I suggest you run the fixit and see if it helps:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Also check out this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/error-2738-could-not-access-VBScript-run-time-for/1a4499ae-8bc1-4534-9c6f-4d399ac70d9a

  It will be useful.

• Tecra R10-111: cannot install the Wireless Manager

  Hey guys,.

  don't know why, but when I install the Manager wireless on my Tecra R10-111 Wireless Manager can be started, but not a second later, the program ends. The only option I have is to accept and put an end to the program press OK.

  I have two versions of win7 on my laptop.

  1 is the original version of Toshiba Win7 OEM, who has been on the laptop.
  --> Here, it works without probs
  --> All updated etc.

  2. is it a full Version of Win7 bought and downloaded in a microsoft store.
  --> Here it doesn't work anymore!
  --> All updated etc.

  Earlier Versions of the Wireless Manager has worked in two partitions with Win Vista and for some time, I remember that he has worked with both versions of Win7.

  What is the problem with that? Toshiba has to provide updates and drivers that work with any version of Win7 and not only with the OEM Toshiba.

  Any suggestions?

  See you soon
  Australia

  > What is it with this? Toshiba has to provide updates and drivers that work with any version of Win7 and not only with the OEM Toshiba.

  Do you think that it is a problem of the tool?
  This seems to work on Toshiba pre-installed OS, so it cannot be a question of tool!

  Maybe a part of the software is missing on the MS Win 7 own

  Have you installed the update of Firmware for 3 G Module?
  This Firmware update is necessary to obtain more stability in your 3 G connection with your Ericsson 3 G module.

  Have you installed the registry patches that are available on the page of the Toshiba driver?
  Do this!

  Good luck

• HP 15r-250tu: cannot install the drivers for the new laptop

  Hi expert, I bought a new laptop from hp 15r-250tu. I installed windows 7 ultimate (64-bit) service Pack 1. Cannot install the drivers for my laptop.i IAM downloaded all the drivers available on the site of hp for this model laptop.i tried to install them in the order as the mentioned error messages, but get that my phone does not support these drivers. Please answer me with links of driver and sequence to install. Thank you.

  Hello:

  Use the W7 x 64 drivers for the HP 250 G2 on your model except file BIOS, firmware, wireless and bluetooth.

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5449369&swLangOid=8&swEnvOid=4059

  Wireless:

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827&swItemId=ob_149229_1&swEnvOid=4058

  Bluetooth:

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_149791_1

• In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and the second time error code 8007000D

  In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and error code 8007000D twice. How can you help me solve this problem

  0X8007000D ERROR_INVALID_DATA

  Try to manually download the update and installation
  http://www.Microsoft.com/downloads/en/results.aspx?FREETEXT=KB972145&displaylang=en&sType=s_basic

  It will not appear in your history after a manual installation, but it will show the updates installed in view area. TaurArian [MVP] 2005-2010 - Update Services

• Windows 7 64 bit, cannot install the driver for bluetooth devices for my Motorola Droid Razr periferical

  Windows 7 64 bit, cannot install the driver for bluetooth devices for my Motorola Droid Razr periferical. When troubleshooting try to apply the fix, after trying, it ends with a message this problem "not set"...

  I finally found the help on my own. Download and install Windows Mobile Device Center. After installation, you'll swear that nothing has been installed, but there is a. The download says it's for Vista, but it also shows Winkdows 7 under system requirements. This is from the download I used.

  Go in Device Manager for each item under the heading Bluetooth with an asterisk, double-click it. Click the tab drivers, then put to update driver. Browse my computer..., let me pick from a list... Under manufacturer, select "Microsoft Corporation". Under model, click on "Windows Mobile-based device support", and then click Next. Click 'YES' in the driver warning window. Windows will now update the driver, and he will tell you, he did it with success!

  This solved my problems. Good luck with yours.

• Cannot install the machine virtual linux 2 TB in size in esxi 5.5

  Cannot install the machine virtual linux 2 TB in size in esxi 5.5

  VM will be restarting inbetween fixing and explains the operating system not found.

  Please help me on this

  Thank you

  Anand

  What Linux distro are you trying to install?

• Cannot install the update for SP2 - 080070490 - elements not found error

  Please help cannot install the SP2 update - error code 490 (080070490)

  Windows Vista 32-bit

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997

  or

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

• Cannot install the Vcenter for Esxi 5.5. Windows 7

  Hi Experts,

  When I run the simple setup, it stops when tried to install the SSO, the message "cannot install the single sign on, this package is not compatible with your processor,..." I'm running a Lenovo T430, the processor in an INTELCore I5 vPro.

  I installed the client vsphere without problems. And I know that in the other lenovo T430 people install the VCenter correctly. I am running Windows 7 Professional.

  Any idea or solution?

  Thank you very much friends!

  Jesus

  Center Server is supported only on 64-bit Windows server in operating systems (see VMware Compatibility Guide: search guest conductor /)

  André

• Cannot install the incompatible files Yosemite, someone knows how do I get updates for creative cloud how do I get

  Cannot install the incompatible files Yosemite, anyone know how to get past this so I can install Yosemite and get adobe creative cloud updates

  You should seek help to install their operating system Apple

  Yosemite sometimes has problems, often related to the 'default' permissions that need to be changed

  -solution https://forums.adobe.com/thread/1689788 of a person

  - and a Java update https://forums.adobe.com/thread/1507936

  -Update may break things https://forums.adobe.com/thread/1772260

• Satellite P750 - 02Q 001 - cannot install the Bluetooth and Tuner DVB-T_ATSC Yuan

  I have more than 20 years and the first time ever answer concerning support for the installation of a driver... sheeezz

  Recently bought laptop below and formatting of disk with WIndows 7 ultimate + SP1 (64-bit)

  Australia
  TOSHIBA SATELLITE P750 - PSAY3A - 02Q 001

  Cannot install the latest drivers below (everything worked when bought the laptop):

  -Yuan DVB-T_ATSC Tuner driver (for TV Tuner model only) driver 2.3.3.31 Windows 7 64 - bit 2.9 MB
  -Bluetooth Stack for Windows by Toshiba Bluetooth 8.00.06 (T) Windows 7 64-bit 78,08 MB

  * DVB - T Tuner Driver *.
  The EXE file extracted in the temp folder and goes no further.
  The device driver shows "STK7700D" with an exclamation mark against it. See the image below.

  * Bluetooth Driver *.
  First installation install the original driver, then he received close to 50% through the installation (appears to fail to install the components of RF RFBUS).

  Then install attempt fails to go too far (is unable to install the driver at all).

  Third attempt and subsequent attempts to repeat the foregoing in order. Install it just gets to a point and is unable to go any further.

  I tried to disable all Wireless WAN and various other comments and try the install again. Repeats exactly as above!

  Refer to pictures:

  DEVICE MANAGER
  http://I52.Tinypic.com/35cr38i.jpg

  1ST COURSE SETUP
  http://I52.Tinypic.com/2r6jfv9.jpg

  2ND INSTALL PROGRESS
  http://i55.Tinypic.com/jgphfc.jpg

  see you soon

  Dennis

  > The EXE file extracted in the temp folder and goes no further.
  > The device driver shows "STK7700D" with an exclamation mark against it. See the image below

  Try to extract the exe from another place, not in the temp folder.
  In my case, I created a folder on a second partition (D) and have extracted the exe file in this folder. Can go to the Device Manager, and then can install the driver through the Device Manager.
  Choose the installation procedure advantage and point to the folder that contains the extracted files.

  With regard to the issue of the BT;
  Download the new battery of BT from here:
  http://APS2.toshiba-tro.de/Bluetooth/

  Then clean the registry using the CCleaner.
  This tool is freeware and can be downloaded on several different pages.
  So after cleaning check if you could install new BT of the register stack.

• Cannot install the MFP M177fw printer driver

  I try again to install the driver and follow the instructions at the bottom of the link but still cannot install. I start small windows and even to create a new user, but can not run.

  http://h30434.www3.HP.com/T5/printer-software-and-drivers/not-able-to-install-a-driver-for-MFP-M177f...

  I use windows 10 try to connect with the wireless option that the printer is in another room. The printer is connected to the router and ping is passthrough. But during the installation, the installer cannot find the printer. I will provide the number IP Installer but nothing helped.

  Can I do to install? Thank you.

  Rgds,

  Tony Thk

  Hi @TonyThk,

  Thank you for showing interest in the Forums of HP Support!

  I understand that you are unable to install the printer wireless. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I see that you have followed the steps in the post you mentioned. In addition to these steps, try the following.

  Tips for a successful wireless connection:

  • What type of encryption are you helping? HP recommends WPA or WPA2.
  • Using a unique network name (SSID).
  • Avoid using filtering by Mac address of the router.
  • Make sure you have 802.11 g active.
  • The printer cannot connect to the 5.0 GHz network. If you have a double router broadband, the 2.4 GHz and 5.0 GHz network names are not the same. Rename the 5.0 GHz network.
  • Don't hide your SSID (network name).
  • Change the router channel fixed wireless as the 1, 6 or 11, who less than traffic.
  • You have a switch or an extra router?
  • Do not use a network of comments (SSID).
  • Disable UPnP on the router.
  • Set the router to 20 Mhz only, or 145Mbps depending on the router.
  • Update the firmware on the router.

  Disable IPV6 in front panel of the printer menu:

  1. Configuration menu
  2. Network configuration
  3. Network services
  4. IPv6, select disabled.

  If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  To assign the static IP address, use the following steps as a guide.

  1. Print a Page of Network Configuration menu of the printer front panel. Note the IP IPV4 of the printer address.
  2. Type the IP address in the browser to bring up the SAP.
  3. Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
  4. Select Manual IP.
  5. Enter your IP address manual (192.168.0.232)
  6. Enter 255.255.255.0 for the subnet mask, except if it is different.
  7. Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
  8. Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
  9. Click on apply.
  10. Restart the router, the printer and the computer.
  11. Test print.

  Ensure that your router and firewall do not block these ports.

  • UDP ports: 427, 137, 161
  • TCP port: 9100
  • Card photo upload:
  • UDP ports: 137, 138, 427
  • TCP port: 139
  • Scanning:
  • UDP port: 427
  • TCP ports: 9220, 9500
  • The HP device status:
  • UDP port: 161
  • Sending faxes:
  • UDP port: 427
  • TCP port: 9220
  • Installation of the HP device:
  • UDP port: 427
  • Ports of Web Services:
  • UDP and TCP: 80, 443, 5222 and 5223
  • Hello Ports:
  • TCP and UDP: 5353 and 5297, 5298

  Update the firmware of the printer:

  • Click here to download and install the update of the firmware of the printer.
  • Make sure that the printer is connected directly to a wall outlet (do not use a bar or a surge protector).
  • What were the results when you ran the printing and scanning doctor (she print or scan, error messages)?
  • Try to install the USB printer.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!