Cannot install the printer HP C4500 on Windows 7

Similar Questions

• Cannot install the printer HP C4500 on Windows 8

  I just bought a new computer (acer) and have installed the photosmart c4580, that prints very well with a USB cable, but I am unable to find instructions on how to use the printer wireless on this laptop... can you please help.  brand

  Hello

  Please run the following program on your Windows 8 machine:

  FTP://15.217.49.143/pub/softlib/software12/COL44840/MP-115766-2/hppiw.exe

  It will ask a few question and install drivers for you. You need to connect to Internet to be able to run.

  Kind regards.

• Cannot install the printer HP officejet 4500 Windows 7

  Original title: HP officejet 4500 printer is not able to install successfully on windows 7 64 bit ver

  Good day to all,

  I have a printer above that connects port router thro is not able to install successfuuly using portable computers that are running windows 7 64 bit ver, uninstalled hp program and delele registry still same.i have try vista laptop with a utp cable from office windows xp and laptop wireless with the computer it works fine. Pls help and your promt response is very much appreciated.

  Moved from Vista devices and drivers Forum.

  Hi Benoit,.

  Good day to you and thank you for posting your query in Microsoft Community.

  I understand that you are unable to install the printer on Windows 7. I'll be happy to help you with your query. However, let me ask you a few questions;

  1. What happens when you try to install the printer?
  2. You receive an error message? If Yes, what is the exact full error message?
  3. You try to install the printer for the first time to Windows 7?
  4. Remember to make no change in the computer before the show, if it was installed before?
  5. What is the brand and model of the computer?
  6. You are able to install the printer to Windows 7 via USB cable? If not, what happens when you connect the printer (via USB) to Windows 7?

  There could be various reasons that you can not install the printer. There could be a possibility if you try to connected the printer for the first time, you need the printer software. If it has been installed in the past, it could be any conflict of third party software. Let's try the methods below and check.

  Method 1: Download and install the latest software of the printer from the printer manufacturer's website and check.

  Enter the exact model and series type the following link and install the printer software.

  Driver downloads &

  Method 2: There are several ways to connect a printer to your computer. An option that you choose depends on the device itself, and whether you're at home or at the office.

  Please see: install a printer

  Method 3: If the printer has been installed in the past, perform the clean boot in order to avoid any conflict of third party software and check.

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  From now on, try the methods above and let us know the result as well as the answers to the questions. We will be happy to help you further.

• Cannot install the printer and windows update error 80070026

  Original title: Registry Editor not work cannot install the printer

  I have Vista the operating system on a Dell laptop with a Core 2 duo, map of Nivea.  Norton Antivirus now after it has started.

  Tried to install the dell printer after uninstalling all printers.   I scan my system using promp... sfc/scannow then I got windows results resource protection found corrupt files but was unable to fix some of the them.details are included in convertible bonds. Journal windir/logs/CBS/CBS.log
  for example:C:/windows/log/cbs/cbs.log

  I looked in the directory C find regedit.exe to rename, but was unable to find it.   I found these if this can help.

  Regedit.exe.4288.dmp
  Regedit.exe.3280.dmp
  Regedit.exe.2292.dmp

  I also got error or popup that without running windows Explorer and then restart it.   I can't install the printer as it pops up and I need to close the program.

  also receive error installer that it is already running
  install GUI is unresponsive

  error code 80070026 during the installation of windows updates.  I open without addons and updates are all to date.

  I'm sorry that there is so much information and error codes.  I think that all what concerns the corrupted files.   Can you help solve c drive please.

  Hello

  1. What is the serial number and model of the printer?
  2. What are the failed updates?
  3 have there been any changes made on the computer before the show?

  I suggest you try the steps to solve the problem with the installation of printer.

  Method 1:
  Run the Fixit and check if it helps.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  For more information, see the links:
  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers
  Search for a printer, the manufacturer Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website
  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  I suggest you try the steps to fix the problem with Windows Update.

  Method 2:
  Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
  http://support.Microsoft.com/kb/929135

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 link to return the computer to a Normal startup mode.

  Method 3:
  Temporarily disable the security software.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

  Method 4:
  You can also manually install updates (KB number) by downloading from the Microsoft Download Center.
  http://www.Microsoft.com/downloads/en/default.aspx

  For more information, please see the links.

  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows

  Warning: An upgrade on the spot is the final solution before you have to reinstall the operating system. Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process

  Hope this information is useful.

• Cannot install the printer. The print processor is not (winprint)

  According to the scenario:

  DC1 in site 1 runs Windows Server 2012 Standard, printing and Document services are installed. Many printers are installed and work.

  DC2 in site 2 is running Windows Server 2008 R2 Standard 64-bit, printing and Document services are installed. I want to install printers that users in this site must be able to print with.

  Same printer exist in both sites. In Site 1 on DC1, I was able to properly install the driver, add the port and installed the printer.

  I took the same driver DC2 and installed. I created the Port with the IP address of the printer but when I finish the Add Printer Wizard I get an error message saying: cannot install the printer. There is no winprint print processor.

  I was looking in many forums and before you ask, the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Print Processors\winprint key does not exist on two domain controllers (tried to create thispost), but makes no difference.

  The winprint.dll file does not exist in the C:\Windows\System32\spool\prtprocs\w32x86 directory on any of the machines, but is located under C:\Windows\System32\spool\prtprocs\x64 on the two machines.

  There seems to be no difference in configuration between these two machines, but as I mentioned abov, on DC1, I'm able to add the printer, and I'm not on DC2.

  Is there anything I can do to get the job to the printer on DC2?

  (And for those who ask why install on a domain controller, there is no member server in this site).

  Thank you

  Hello Josi,

  Thanks for posting your question on the Microsoft community.

  The question will be better suited to the audience of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet forums.

  TechNet Forum
  https://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer

  Thank you

• Cannot install the printer. The print processor does not exist.

  Windows 7 Enterprise 64 bit.  I am able to install HP LaserJet printers but no virtual printer.  I can not load the XPS from Windows printer or Print to OneNote.  I also tried to load more than one PDF printer and none of them work.  The error I keep gettig to "cannot install the printer.  The print processor does not exist. »

  Any ideas would be appreciated.

  My laptop has been reloaded from a picture, and I was not able to start the print spooler at all. I have studied the issue and cleaned files and registry entries and was able to print on real printers, but not virtual. That's when I asked the question.

  Finished reimage the computer again, and once again, I could not start the print service. We discovered that the image that the laptop was built from was actually a VMWare virtual machine, so we started to look in that direction.   We had to delete the following entry in the registry and rebooting, how the print spooler began to work very well.

  [Print HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors\ThinPrint for VMWare Port Monitor]

  You wanted to post this in case someone else ran into a similar problem.

  This is what worked for me.

  I copy the files from the print processor from another machine to work with the same architecture as the one who has the problem (x 86 or x 64).

  Step 1: Stop the print spooler service.

  Step 2: Copy all the files and folders on the system to work under C:\Windows\System32\spool\prtprocs\x64.

  Step 3: Make a backup of the system files listed in the C:\Windows\System32\spool\prtprocs\x64 problem.

  Step 4: Paste the files that you copy from the system of work in the case of the United Nations, the problem system.

  Step 5: Start the print spooler service.

  Try to connect or install your net printer and it should work now.

  I hope this work for all of you.

• "Cannot install the printer. Operation could not be performed. error 0x000003eb.

  I'm running Windows 7 (not Vista) and trying to install a Kodak printer driver and get "cannot install the printer. Operation could not be performed. error 0x000003eb"I searched constantly everyday for a fix. You have a solution other than what answers are already in this forum.  I uninstalled and reinstalled tried wireless and usb, installation driver separately, tried to install it in safe mode, run now utility scan.  I think that the problem began with an update of Windows 7 which has hung up and eventually having a corrupted file?

  Hello

  What is the exact model of the printer number? I suggest you to check if the printer is compatible with Windows 7: http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx If the printer is compatible, then uninstall all the drivers connected the printer to the computer, download the latest drivers from the website of the manufacturer, the install without connection to the printer. Connect the printer when it prompts. If the problem persists, contact the printer manufactrer for assistance http://support.en.kodak.com/app/contact/selected/true For more information see: http://support.en.kodak.com/app/answers/detail/a_id/1258/kw/Unable%20to%20install%20printer/related/1/selected/true Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• I have windows 7 ultimate. Cannot install the printer hp psc software 2410. How to rectify

  My laptop says cannot install the software. I tried all help. Unable to resolve.

  Hello

  According to the HP.com website, your printer driver is installed via Windows Update. The HP document that describes this process can be found here: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796879&cc=us&dlc=en&lc=en&os=4063&product=303753&sw_lang=.

  Basically, you need to leave the laptop to start the Add New Hardware Wizard. You can facilitate this by going to control panel, select devices and printers, and when this window opens, select Add a device. Make sure that your printer is connected to your computer via a USB cable, the printer, before to start the wizard.

  Let me know if this helps you.

  Kind regards

  BearPup

• Cannot install the printer Hp laserjet 1020

  Original title: cannot install my printer

  I bougth a new computer with windows 7, I try to install my priter hp laserjet 1020 I have the instalation disk but the computer can not find the driver, so I download the driver from the web page hp, but also the computer cannot read o found when the web site hp say's it

  Hi Michael,
   
  In addition to the suggestion of Palcouk, follow these steps and check if they help.
   
  Step 1:
   
  After you download the drivers from the manufacturer's website, right-click on the Setup file and run as administrator.
   
  Step 2:
   
  Temporarily turn off UAC (User Account Control) and try to install the driver.
   
  Note: User Account Control (UAC) can help prevent your computer from unauthorized changes. UAC notifies you when changes will be made to your computer that require administrator-level permissions. These types of changes can affect the security of your computer or can affect settings for other people who use the computer. We recommend that you leave UAC to help your computer course.
   
  Drivers download for HP LaserJet 1020 printer
   
  Printer HP LaserJet 1020 (32-bit driver)
  Printer HP LaserJet 1020 (64-bit driver)
   
  Also, be sure to have a look at the installation procedure.
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Cannot install the scanner (Epson Workforce 500) Windows 7 driver

  I have an Epson Workforce 500 multifunction printer, copier, scanner, fax, which worked well in the past, but the scanner no longer works.

  I tried several times, following the line (and by telephone with a technician of Epson) instructions on downloading and installing the printer updated and drivers scanner Epson.  However, always, the installation stops and the message that drivers cannot be installed (and then restart and try again message appears).

  I was able to get the printer to work by plugging the USB cable to the printer and allowing Windows Installer the driver of the ESC/P-R, but the scanner does not work, and I did all the other characteristics of the available printer.  When I try to get the latest driver via the printer preferences, I get the message that I have already installed the most recent driver.

  More recently, I used the Troubleshooting Guide for the Epson, up to the point where it is said: ' Click or Start and select programs or all programs. "

  Select Epson or Epson printers, select your printer folder, and then select Epson Printer Software Uninstall. »

  When I do this, the program from the start menu does not have the listed Epson printer, or it displays the option to uninstall the printer.

  In addition, when I go into Control Panel, uninstall a program, the Epson printer is not as an installed printer.

  I tried once more to install the driver downloaded from the Epson site package and again, has received the message that the driver could not be installed.

  Then, I used the window update to install all the updates Windows 7, deleted the Epson printer, reconnect the USB cable and restart the computer.  Once Windows has installed the ESC/P-R driver, which she says is the last available.  I'll let it go and just not use the scanner if I can't get this resolved.

  Before you install go to start, make right click on computer, click on properties and the system window will open, left eye for click Advanced settings open then click on the Hardware tab, click installing driver and assigned to the let me select never install Windows update, and save at the bottom. You can set it back by default later if you wish. Now install the downloaded driver, have turned on printer, but do not connect the USB cable until you are prompted.

• I can't install the printer Brother DCP 1000 Windows 7.

  I can't get the windows 7 32-bit for my printer Brother DCP-1000 driver. Whenever I try to get the driver through the "Windows Update" button when the screen "install the printer driver', it tells me that it is impossible to connect and try again later. The same process has worked for my other two computers running windows 7. The computer has an internet connection, but cannot update the printer drivers. Any ideas?

  Original title: Brother DCP-1000 printer - driver problems Windows 7

  You can try the 32-bit drivers for Windows Vista for the STC-1000 from the brother download Site. They tend to work perfectly.

• Cannot install the printer wireless with error code 0 x 00000643

  Original title: error0x00000643 on the installation of the printer

  try to install printerget wireless to the final installation and getting the error 0 x 00000643. Windows Vista 64-bit

  Hello

   
   
  Thanks for posting your question in the Microsoft Community.
  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.
  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:
  (1) did you of recent changes to the computer before this problem?
  (2) what is the brand and model of the printer?
   
  Please follow the methods and mark the question below:
   
  Method 1:
   
  I suggest you to install the printer in clean boot mode.
   

  You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Method 2:
   
  Install the latest drivers for the printer from the manufacturer's website and check if that helps.
   
  OR
   
  You can also uninstall the printer using the network browser and install it again.
   
  To do this, follow these steps:
  a. open the network and sharing Center. To do this, type Network Center and sharing in the search box and then click Network Center and sharing in the list programs.
  b. in the pane tasks, click view computers and devices.
  c. find the printer and then right click on the printer to uninstall.
  d. once the printer is uninstalled, reconnect the printer to the computer. The Plug-and-Play service begins to install the printer.
   
  Reference:
  Error message when you try to install a WSD printer on a Windows Vista-based computer after installing first attempt fails: "impossible Operation completed (error 0 x 00000643).
  http://support.Microsoft.com/kb/944960
   
   
  I hope that the information above helps you.

• Cannot install the printer. spoolersrv has stopped working

  setting up a printer and get a message error-spoolersv has stopped working and was closed - what should I do?

  original title: Spooler problems

  Make sure that the printer is compatible with Vista and that you use the correct software, driver and firmware for the printer AND your version of Vistahttp://www.microsoft.com/windows/compatibility/windows-vista/default.aspx.  Go to the web site of the manufacturer and get the files the most up to date available for your printer and your version of Vista and re - install to make sure that you have the most recent versions (those that come with the printer may be obsolete or wrong operating system).

  How do you install the printer?  What is the manufacturer, brand and model printer?  This printer has already worked before or is this new - and if it worked before, it never installed on a Vista system?  Is it on a network or connected to a single PC (and how is it connected)?

  Go to start / Control Panel / Admninistrative Tools / Services and check that the print spooler is set to automatic and started - if it isn't.

  Check the settings on the control panel of the printer itself to ensure that it is correctly configured.

  If necessary, go to start / Control Panel / Printers and right click on the printer and select properties and choose Print directly instead of via the spooler and see if that solves the problem.

  I hope this helps.  Keep me in the loop.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot install the printer on the laptop

  Point question:

  Product name: HP Photosmart e-all-in-one printer-D110a

  Model name: CN731A

  Portable printer is installed:

  Operating system: Windows 07-34 bits

  Brand: Dell

  I'm unable to install my photosmart D110a printer.  Previously, I have installed the printer on another laptop. I changed computers, now that the drive won't allow me to install fully on this new computer.  It allowed me to install and simply use the printer section, but not the scanner or copy option.  I uninstalled the printer now, it won't even install it partially.  I really need to use my printer.

  Restart your PC.

  Choose it "Full Feature" software for your printer from here: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-80511-1&cc=us&dlc=en&lc=en&os=4062&product=4023246&sw_lang= "

• Cannot install the printer driver - error of access denied

  I have two laptops Inspiron 1545 new running Windows 7 64-bit edition that expose that same question.  I'm trying to get an Epson color Stylus 760 working with them via a USB connection.

  When I join the starting the unit is correctly recognized, but the Epson driver does not install correctly.  If I run Windows Update, the Epson driver is listed as an optional update.  If I select and run the update, it fails with 80070005 error.

  If I go into Device Manager, the printer is listed as a printer USB that does not run as properly as there is no driver.  If I choose "put updated pilot" from the Device Manager, it downloads successfully the driver (even such as mentioned in Windows Update) and when you try to install the driver it comes back with an error "access denied."

  As mentioned previously in this case with two laptops.  In both cases I was logged under an administrator account, but not "the" administrator account.  I have enabled the administrator account and tried to install it through this, but it made no difference.  I tried also to remove and reinstall the device without success.

  The Windows 7 compatibility site said that the printer is compatible with Windows 7 64 - bit edition.

  Hi Shawn,

  In my view, that there is a driver 64 bit Windows 7 according to the guidelines of this site:
  http://www.Epson.com/cgi-bin/store/support/supAdvice.jsp?BV_UseBVCookie=Yes¬eoid=147071&type=highlights

  The Epson Stylus Color 760 is a 'built in the Windows 7 driver.

  Nevertheless, I will try your suggestion if Alan does not work.

  Kind regards

  Dan