Cannot install the program easy to tie

Similar Questions

• Cannot install the program, the error message: Server error 145905 [invalid header] communications failure

  Original title: communication failure 145905 [invalid header]

  When you try to install a program I always get this error each time message: Server error 145905 communication failure [invalid header] would appreciate any help that anyone can provide. Thank you.

  Hello

  That is the application that you are trying to install?

  I suggest you follow these methods and check.

  Method 1: Run the hotfix to correct the following problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  Method 2: Perform the clean boot, try to install application.

  Follow the suggestions of this link.

  http://support.Microsoft.com/kb/310353

  NOTE: Once you check the functionality, follow the suggestions under steps to configure Windows to use a Normal startup state.

  If the problem is specific to the program, I suggest you please contact the manufacturer of the program for utilities.
   

  I hope this helps!

• How to make all the user accoount cannot install the program in Windows XP Home Edition. ?

  I want to do any user account cannot install program, just as it is in an administrator-level... Is it possible if I use Win XP Home. ? cause I can see, all of them say, it is possible if I use XP Prof

  If possible, I want to make a control panel cela a regedit or a BIOS... I don't want to use some software except it's freeware...

  Thanx

  You can use Windows Steady State, but he was supposed to have been removed from the MS Download Center by December 31, 2010, because Support for it will end June 30, 2011.
  All that being said, it is always available on the Download Center and it's free – Windows SteadyState 2.5

  MowGreen
  Expert in Windows IT Pro - consumer safety

  * - 343-* FDNY
  NEVER FORGOTTEN

• Cannot install the program "the software is already installed.

  Original title: lost software

  I got my asus with windows 8 pre installed. When I've updated to Windows lost 10 applications.

  I had installed Autodesk software but disappeared and when I try to reinstall, it does not because the software is already installed.

  Hello

  Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

  What operating system is installed on the computer?

  The question is originally due to some files to this program, try to uninstall the program completely.

  Please follow the steps below and check the issue.

  If you have Windows 8 as selected in the category run the fix it below:

  The problems that the programs cannot be installed or uninstalled

  https://support.Microsoft.com/en-us/mats/program_install_and_uninstall

  Method 1: Check programs and features.

  1. Press Windows + X on the keyboard.
  2. Go to programs and features
  3. Check if you have the program that there are listed > Uninstall.

  Method 2: Run the clean boot

  Try to install the boot program.

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot

  How to perform a clean boot in Windows

  Note: See "How to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  Let us know if you need more assistance. We will be happy to help you.

  __________________

  Thank you best regards &,.

  Isha Soni

• Cannot install the program - Dino-lite on Windows 7

  Haviong problems to make the program install and load.  Help!

  See the developers website for compatibility with Windows 7 and if there are updates, corrections or difficulties that might ensure compatibility.

  Windows 7 Compatibility Center

  Check if your application software or hardware is on the list

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Software:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=software

  You can also try to run the program in compatibility mode

  You can find more information on compatibility modes in the articles below:

  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  http://Windows.Microsoft.com/en-us/Windows7/Program-Compatibility-Assistant-frequently-asked-question

  The software is designed for an earlier version of Windows such as Windows XP? Most older programs don't work with Windows 7, in particular some programs for Windows XP, can you need to perhaps upgrade to Windows 7 Professional or ultimate edition if you run not an edition and download the Windows XP Mode free program which will allow you run old programs:

  Run in Windows XP Mode requires:

  (1) Windows 7 Professional, Ultimate or Enterprise (not supported in Home Premium).

  Windows XP Mode and Windows Virtual PC

  http://www.Microsoft.com/Windows/Virtual-PC/default.aspx

  Windows XP Mode now accessible to more than PC

  http://windowsteamblog.com/Windows/archive/b/Windows7/archive/2010/03/18/Windows-XP-mode-now-accessible-to-more-PCs.aspx

  Get started with Windows Virtual PC

  http://www.Microsoft.com/Windows/Virtual-PC/get-started.aspx

  http://www.notebooks.com/2009/11/23/using-Windows-Virtual-PC-with-Windows-XP-mode/

  Windows 7 - upgrade Express features:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Anytime-Upgrade

• Cannot install the program files to a usb adapter with TER/GUSB2-N Wireless

  first of all, let me tell you bear with me, I'm not very tech savvy

  Previously on my desktop computer with windows xp operating system, I have a usb adapter that plugs into the back that captures internet of my modem in the basement. recently, I was forced to reformat my computer and lost all my settings and the installation for the card files. After calling at & t to support, I was directed to http://broadband.custhelp.com/app/answers/detail/a_id/21282/kw/installation/session/L3RpbWUvMTMxMDE0OTI3MS9zaWQvbTJSQ2J1eWs%3D where I was instructed to download files to install my adapter (because I don't have the original installation disc for it). This is where I am stuck. the files are in format ".sys" and therefore cannot be executed. What should I do at this point?

  Take a look at MVP Jack here's website: http://www.ezlan.net/wzc.html

• lack of PIDOCOB6.dll cannot open the program

  lack of PIDOCOB6.dll cannot open the program of old software from microsoft for photos

  lack of PIDOCOB6.dll cannot open the program of old software from microsoft for photos

  =========================================
  The article Microsoft Knowledge Base that address the
  Question of PIDOCOB6.dll are no longer available, but I think
  the fix was to uninstall/reinstall Picture It!.

  Also... the error could be related to a printer driver... If you
  recently installed a new printer or your printer driver update
  It is maybe at fault.

  Sorry that's all I have on the subject.

  There is a Picture It! Group on Yahoo Groups... maybe
  could someone offer a few ideas:

  A_Picture_It_Help · Creative with Picture It & SOAK!
  http://tech.groups.Yahoo.com/group/A_Picture_It_Help/

• Computer attempts to install the program "YouSendIt" which is uninstalled, but appears in the programs?

  computer works constantly trying to install the program, error 1721.   I can't uninstall the program that appears in the programs, said it cannot do.  It happened when I changed the date of the restoration when I installed the program.  I uninstalled the program, but it continues to show in programs.   I can't go into the Add/Remove software at all.

  Hi, Skybill2000,

  1721 error may appear when you try to remove programs by using Add / Remove programs in Windows XP

  http://support.Microsoft.com/kb/891985

  Windows registry backup first, and then follow the steps listed here.

  http://www.removespywareguides.com/YouSendIt-exe-how-to-remove.html

• Cannot install the update KB2698023

  Original title: Update keeps fails on update of security for Microsoft.NET framework 1.1SP1 on windows xp, vista, server & 200886 (KB2698023). Pls help that a PAO whi has tried the fix that it is but still failed

  I'm not very computer smart - give so pls guide idiots for all responses that can solve this problem

  Hi Jampers,

  Thanks for posting in Microsoft Communities. The problem description, I understand that you are not able to perform the update of Windows. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         You are able to install other updates successfully?

  ·         You get the error message?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean bootState to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state from the link to start the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  For more information, please see this article.

  You cannot install some programs or updates

  Note: You must take the backup of the data before performing any installation of windows.

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• Cannot install the update error KB2718704: 0x8007F064

  Original title: XP, error Code (KB2718704) install failed: 0x8007F064: after that I tried to solve this problem, because as far as I know, but still, there is no, then how should I do?

  Microsoft Update tried to install the update for Windows XP (KB2718704) whenever I closed my computer, but it could not include my manual installation.

  Hello

  Method 1: Run the fixit

  Check out the link:

  The problem with Microsoft Windows Update is not working

  http://support.microsoft.com/mats/windows_update/.

   

  Method 2:

  Check out the link:

  You cannot install some programs or updates

  http://support.microsoft.com/kb/822798.

  Warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows XP

  http://support.microsoft.com/kb/322756/.

  You can ignore the 7 method to perform the upgrade in-place.

   

  Method 3: Scan SFC

  SFC scan will find all missing or incorrect system files and repairs them.

   

  File system (CFS) Checker

  http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true.

   

  Method 4: Install the updates to the clean boot

  Step 1: Clean boot

  When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

  Check out the link:

  How to configure Windows XP to start in a "clean boot" State

  http://support.microsoft.com/kb/310353.

  Note: To set the computer back to start normally, use the procedure How to configure Windows to use a Normal startup state in the same page.

   

  Step 2: Install the update manually

  Check out the link:

  Update for Windows XP (KB2718704)

  http://www.microsoft.com/en-us/download/details.aspx?id=29975.

   

• Error 0 x 80240036, cannot install the update to windows

  Original title: [error number: 0 x 80240036]

  whenever I try to update windows, it fails & contains the number of error: 0 x 80240036.

  Hello

  Have you made changes on the computer before this problem?
  I suggest you to check the updates could be the cause of the problem. To do
  (a) click Start, click all programs, and then click Windows Update or Microsoft Update.
  (b) click on view update history. A window opens that displays all the updates that are installed and those who have not installed properly on the computer.
  (c) in the status column, locate the update that do not install and then click on the red X.
  A new window opens that displays the installation error code, note the error number.
  Provide us with the number if the issue not be resolved after following the methods.
  Method 1:
  I suggest you to run the FIXIT from the link below and check.
  The problem with Microsoft Windows Update is not working.
  http://support.Microsoft.com/mats/windows_update/
  Try installing updates and if the issue gets not solve, go to the method 2:
  Method 2:
  If the problem is not solve I suggest you try the procedure described in the link mentioned below.
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798
  Disclaimer: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows
  And take note: while running chkdsk on the drive if bad sectors are found on the hard drive of whenchkdsk trying to repair this area if all available on which data may be lost.
  
   
  Hope this information is useful.

• Cannot install the pkg of update for the windows client, I get error code0x8004ff84

  I get error code ox8004ff84

  Hello

  Method 1:
  You can read the following article.
  Cannot install Windows updates
  http://support.Microsoft.com/kb/555461
  Method 2:
  You can read the following article.
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. See the following link for more information.
  http://support.Microsoft.com/kb/322756
  See also:
  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services
  http://support.Microsoft.com/kb/906602
  It will be useful.

• Windows Update cannot install the update of Security No.2686509

  Windows Update has tried about 18 times to install the 2686509 update, and it does not reach every time, how can I install it

  Hi LyneDerksen,

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         You are able to install other updates successfully?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  You cannot install some programs or updates

• Cannot install the printer esp3 on computer software-

  Downloaded software gives up to halfway through the installation. Manufacturer told me to change the settings on the computer but I don't know the password or username to my computer, because it belonged to my grandson, is several years old. How can I get the system administrator to change the password so that I can access? Or y at - it another way to fix the installation process?

  Hello

  ·         What is the exact error message that you encounter when you install the software on the system?

  If you are not the system administrator, then you cannot install any program on the system and unfortunately, the technical support engineers Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the sticky below.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

  Microsoft's strategy concerning lost or forgotten passwords

  http://support.Microsoft.com/kb/189126

  I suggest you to check with your grandson if it can help you with the user name and password.

• Age of Empire 3. error 1334. Cannot install the file 'hispaniola_map.ddt' because the file is not found in the CAB file ' Disk3C ~ 1.cab '.

  I recently bought Age of Empires 3 and tried to install it.  I get to drive three - until almost the end - when I'm "error 1334. Cannot install the file 'hispaniola_map.ddt' because the file is not found in the file ' Disk3C ~ 1.cab '. This may indicate a network error and the error reading CD-ROM, or a problem with this package. "The installation continues until the end of the progress bar, but it reads"Rolling Back Action"for about fifteen seconds before I got a"feature transfer error", which reads" error:-1603 Fatal error during installation. " Consult the help of Windows Installer (Msi.chm) or MSDN for more information. "Then, the Setup program stops and tells me that the game failed to install and my system has not changed.  I cleaned the disk and it is in good condition. My computer also meets all the requirements for the game. I looked everywhere for an answer, but so far none has solved the problem. I tried to install it without the firewall and antivirus software running, in addition to install in safe mode.  Any suggestions?

  Hi void 1337,

  Follow the suggestions below for a possible solution:

  Method 1: I suggest that you put the computer to boot and then try to install the game and check to see if it helps:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: You can also follow the link and check if it solves the problem:

   

  Error message when you install a Microsoft game or a mapping program

  http://support.Microsoft.com/kb/258496

  You can also view the article mentioned below to learn more:

  Microsoft games: InstallShield Error Messages

  http://support.Microsoft.com/kb/910816

  If the above mentioned methods do not work, then post your request in the age of the forum of the empire for further assistance:

  http://Forum.AgeCommunity.com/

   

  Let us know if that helps.