Cannot install the Trusted Platform Module Driver / software

Similar Questions

• Satellite C50D-A-133 with Win7 - cannot install the USB 3.0 driver

  I Satellite, C50D-A-133 with Win 7 x 64 and cannot install the usb 3.0 drivers.
  I download the driver from the support site of toshiba for usb 3.0 for win7 x 64 and it starts to install the driver, but in the end it saids...
  Windows found driver software for your device but encountered an erroe trying to install it.
  AMD USB 3.0 host controller
  The system cannot find the specified file.

  I try to point the location of the driver but same error.
  Other drivers installed ok only gives error

  I ve downloaded and unzipped the driver and everything seems OK.
  As far as I know laptops equipped with platform AMD isn't chipset driver and after installing display driver must be installed USB driver.

  Try to download it again and start the installation manually.

• Cannot install the MFP M177fw printer driver

  I try again to install the driver and follow the instructions at the bottom of the link but still cannot install. I start small windows and even to create a new user, but can not run.

  http://h30434.www3.HP.com/T5/printer-software-and-drivers/not-able-to-install-a-driver-for-MFP-M177f...

  I use windows 10 try to connect with the wireless option that the printer is in another room. The printer is connected to the router and ping is passthrough. But during the installation, the installer cannot find the printer. I will provide the number IP Installer but nothing helped.

  Can I do to install? Thank you.

  Rgds,

  Tony Thk

  Hi @TonyThk,

  Thank you for showing interest in the Forums of HP Support!

  I understand that you are unable to install the printer wireless. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I see that you have followed the steps in the post you mentioned. In addition to these steps, try the following.

  Tips for a successful wireless connection:

  • What type of encryption are you helping? HP recommends WPA or WPA2.
  • Using a unique network name (SSID).
  • Avoid using filtering by Mac address of the router.
  • Make sure you have 802.11 g active.
  • The printer cannot connect to the 5.0 GHz network. If you have a double router broadband, the 2.4 GHz and 5.0 GHz network names are not the same. Rename the 5.0 GHz network.
  • Don't hide your SSID (network name).
  • Change the router channel fixed wireless as the 1, 6 or 11, who less than traffic.
  • You have a switch or an extra router?
  • Do not use a network of comments (SSID).
  • Disable UPnP on the router.
  • Set the router to 20 Mhz only, or 145Mbps depending on the router.
  • Update the firmware on the router.

  Disable IPV6 in front panel of the printer menu:

  1. Configuration menu
  2. Network configuration
  3. Network services
  4. IPv6, select disabled.

  If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  To assign the static IP address, use the following steps as a guide.

  1. Print a Page of Network Configuration menu of the printer front panel. Note the IP IPV4 of the printer address.
  2. Type the IP address in the browser to bring up the SAP.
  3. Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
  4. Select Manual IP.
  5. Enter your IP address manual (192.168.0.232)
  6. Enter 255.255.255.0 for the subnet mask, except if it is different.
  7. Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
  8. Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
  9. Click on apply.
  10. Restart the router, the printer and the computer.
  11. Test print.

  Ensure that your router and firewall do not block these ports.

  • UDP ports: 427, 137, 161
  • TCP port: 9100
  • Card photo upload:
  • UDP ports: 137, 138, 427
  • TCP port: 139
  • Scanning:
  • UDP port: 427
  • TCP ports: 9220, 9500
  • The HP device status:
  • UDP port: 161
  • Sending faxes:
  • UDP port: 427
  • TCP port: 9220
  • Installation of the HP device:
  • UDP port: 427
  • Ports of Web Services:
  • UDP and TCP: 80, 443, 5222 and 5223
  • Hello Ports:
  • TCP and UDP: 5353 and 5297, 5298

  Update the firmware of the printer:

  • Click here to download and install the update of the firmware of the printer.
  • Make sure that the printer is connected directly to a wall outlet (do not use a bar or a surge protector).
  • What were the results when you ran the printing and scanning doctor (she print or scan, error messages)?
  • Try to install the USB printer.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Cannot install the printer esp3 on computer software-

  Downloaded software gives up to halfway through the installation. Manufacturer told me to change the settings on the computer but I don't know the password or username to my computer, because it belonged to my grandson, is several years old. How can I get the system administrator to change the password so that I can access? Or y at - it another way to fix the installation process?

  Hello

  ·         What is the exact error message that you encounter when you install the software on the system?

  If you are not the system administrator, then you cannot install any program on the system and unfortunately, the technical support engineers Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the sticky below.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

  Microsoft's strategy concerning lost or forgotten passwords

  http://support.Microsoft.com/kb/189126

  I suggest you to check with your grandson if it can help you with the user name and password.

• Cannot install the Epson CX4800 printer driver in the new Win7 64-bit system.

  I have a new pc with Win7 64 bit. I downloaded the driver Vista/Win7 64-bit on the Epson site. The Installer-error at the point when you try to install the driver. I checked Device Manager and can see Printing USB support in the USB controllers section. When you view Device Manager, I can unplug the printer USB cable and USB printing support icon goes. When I plug the cable into the printer, the reapperars icon. I can scan documents from the printer to the computer. I can also copy the parts of the printer on the paper. I can't get the driver to install. Windows simply says "driver not installed device software." I run the driver installation program Epson 4 times with no success. Your help is appreciated.

  Hi halbad,

  Please see the post below with a similar problem and fix possible:

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/f1d234f2-d14c-4b0a-A2ac-53fb72fb5357

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Cannot install the Steelseries Shift NSIS error software

  Original title: NSIS error

  I try to install the software Steelseries Shift to run the new keyboard that has the world of Warcraft cataclysm, but whenever I get NSIS error and a window that says Steelseries Shift has encountered a problem and needs to close.  Basis of keyboard keys work, however, we are unable to activate any game due to the failure of the download process.

  Hi electricfreddie,

  ·         What is the exact error message?

  Follow these methods.

  Method 1: Follow the steps in the article.

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

• Dell laptop, cannot install the drivers for USB drives.

  Although the fans more of my family and the power of Google, I can not solve this problem is to have my sister.

  Each USB key she inserts into his laptop computer are, although recognized, never installed.  For example, when I install in another computer USB flash drive, the typical action should be that either the system operating rises automatically the drive to a letter on my computer, or invite an Assistant saying that it will try to install the drivers for the flash player and do it automatically.

  When I insert a flash drive into this laptop, however, it will prompt me to find the location of the folder where the drivers for the USB key is installed.  When I ask for an alternative, he will try to find it through Windows Update for drivers, then answer he found nothing.

  I tried to assign the same flash as a generic device drive in Device Manager, but nothing helps: the flash player still will not mount in my computer properly.  Windows Update, moreover, indicates that the system is up-to-date.

  Any ideas on how to fix this, so that the laptop in the world will recognize volumetric flash drives and devices entry without asking for the location of the driver?  That is, a system of 'plug & play' with all USB devices?

  "Windows Update, moreover, indicates that the system is up to date."

  You get the manufacturer's operating system hardware drivers: Dell.

  http://support.Dell.com/support/downloads/index.aspx

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  See you soon.
  Mick Murphy - Microsoft partner

• Cannot install the Flash updates or drive

  Try to install the updates for Reader and Flash Player on Mac book pro (OSX 10.8.5)  I have also a wch screen shows my name (not the e-mail address) & asks for my password.  tried adobe pw, apple id pw, changing adobe pw.  Nothing works.  What should I do?

  This password is presented by your operating system and is designed to prevent you from accidentally installing the software.

  If it comes to your personal computer and you don't need a password to connect to the computer when it first starts, you can probably leave the password blank and click OK to go to this prompt.  If it comes to your personal computer and your normal password does not work, make sure that CAPS LOCK SHIFT is off, and then type the password carefully.

  If this is your work machine and he asks an administrator password, well, you will need to have a conversation with your computer friendly.

• WinXP not reading USB floppy during installation (F6). Cannot install the ACHI storage controller driver.

  I bought a 3000 N200 with Win Vista Basic. His is not illegigble for a decommissioning of the plant, but apparently it's possible.

  At the beginning of the XP installation after you press F6, everything seems very well, that the floppy drive is read I can select the appropriate driver and program installation continues...  Drunk when the installer is ready to copy files to the hard drive, Setup stops and asks the "Intel Matrix Storage Manager" diskette in the A: drive.    The thing is that the drive is still in the floppy drive. It's as if the USB floppy drive is not connected.  What's wrong?

  I've done the disk several times different. I unplug it and re - insert the USB key.

  I can't disable the ACHI and run the XP installation very well, but the ACPI driver (or something like that) is installed.  Later, during the loading of software the program WinDVD from the Lenovo Web site does not recognize the manufacturer and stops.

  Help, please...

  nLite is my Savior. I've not finished installation, but once the installation program only is complaint not only no hard drive was present, I think that I am free to hone. I just included the AHCI driver in nLite with the chipset drivers and it seems to work...

  Later I'll post the final verdict...

• Re: Satellite P500-12F - cannot install the new nVidia display driver

  Good evening

  I'm sorry for stupid question, but I don't know what to do. I have the Satellite P500-12F.

  I tried to download the new graphics drivers for the NVidia card, I went to the site of NVidia and downloaded a new driver, which dates back to December 2009, instead of mine, which is July 2009, however, when I try to install it, the system indicates that Joana does no hardware that is compatible with the new driver.

  Could you tell me, what am I doing wrong? I could use any guidance as well. Thank you very much!

  Hello

  Why you try to use the nVidia display driver? These drivers are not pre-tested on the laptop and installation is at your own risk! In the worst case, you could destroy the graphics chip.

  As Akuma written already using the latest drivers Toshiba because they are pre-tested.

  Why you want to update the display driver? You are not satisfied?
  Remember: never change a running system! ;)

• Windows can't verify the Publisher of this driver software

  I have a HP a1330n computer

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c00572524

  my onboard audio is AC 97

  I installed an edition of synergy Zotac Geforce 210 1 GB in my PC to replace my aging Radeon Xpress 200 yesterday

  My OS is Windows 7 Ultimate 32 bit

  I tried to install the AC97 Drivers on their site and

  I met a problem when I installed a message appears and it says:

  "windows cannot verify the Publisher of this driver software".

  I clicked on "continue installation of the driver software".

  another and another appeared and so now I just do not understand why Windows 7 won't let me install this driver

  Its so frustrating!

  Please help I need you guys to fix my problem

  Thank you that I understand, my audio integrated is disabled in the bios

• Cannot install the driver/software package

  HI (sorry for my English, I'm a Spanish speaker).

  I have an all in a psc 1315 and cannot install the software/driver from the site in a new 32-bit Windows 7 PC.

  I tried everything I could find in the forum and on the outside.

  I downloaded the driver from:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=ES&CC=ar&DLC=es&sw_lang=&product=3745...

  and it can run fine.

  When the instalation starts fine, after the license agreement, when the installation is always "system analysis", he shutdow. Close the installation without an error message. Don't just run the next step.

  So I can't install anything, can not get the HP Solution Center and other software for analysis.

  Is not the antivirus, I tried to close the shields in time, not if.

  I guess the Installer (AIO_CDB_NonNet_Full_Win_WW_130_141.exe) in the site's just failed.

  I extraxt .exe files and tried to install the Solution Center in the "setup" folder inside, don't let me do. And it has a lot of files with configurations of software I don't know what I need those.

  Can I connect the printer without the software, while adding in windows and it works for printing and browse the WIA, but in this way the "Scan" button on the HP psc 1315 do not work.

  Hello

  Still, the installation problem you are facing, in order to avoid any installation problem, please also make sure that the USB printer is disconnected, enter the control panel > devices and printers, remove any printer PSC 1310 listed and restart the PC before the installation.

  And regarding the specific error:

  Start the installation and follow the steps.

  Once reached the license agreement window, click the 2nd link above (using the Internet).

  Make sure that the two options set as No, thank you.

  Accept the license agreementt continue following the install.

  You see a difference by changing these settings?

  Kind regards

  Shlomi

• How to activate the TPM (Trusted Platform Module) in the BIOS?

  Original title: activate the TPM in vista.

  Hello team MS,

  I use Win Vista Ultimate 32-bit operating system. I want to activate the TPM (Trusted Platform Module) for use bit locker drive E:\. How to enable the TPM in the BIOS. I use Intel 915 gigabytes - motherboard with 1.5 GB of RAM and a 512 MB graphics card. Please, I beg you. suggest me.

  Thank you

  Rahul

  Hello Rahul,

  What is the brand and model of your computer?

  I recommend you to consult the manual that came with your computer to activate the TPM (Trusted Platform Module) in the BIOS (Basic Input Output System) as the BIOS settings vary for each computer & it depends on the manufacturer of the computer. If you are not comfortable to run, you can contact the manufacturer of your computer for help.

  
  Note: change BIOS / chipset can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/chipset can be solved. Changes to settings are at your own risk.

  
  Reference: Overview of BitLocker Drive Encryption

  Hope the helps of information.

• I have windows 7 ultimate. Cannot install the printer hp psc software 2410. How to rectify

  My laptop says cannot install the software. I tried all help. Unable to resolve.

  Hello

  According to the HP.com website, your printer driver is installed via Windows Update. The HP document that describes this process can be found here: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796879&cc=us&dlc=en&lc=en&os=4063&product=303753&sw_lang=.

  Basically, you need to leave the laptop to start the Add New Hardware Wizard. You can facilitate this by going to control panel, select devices and printers, and when this window opens, select Add a device. Make sure that your printer is connected to your computer via a USB cable, the printer, before to start the wizard.

  Let me know if this helps you.

  Kind regards

  BearPup

• Cannot install the scanner (Epson Workforce 500) Windows 7 driver

  I have an Epson Workforce 500 multifunction printer, copier, scanner, fax, which worked well in the past, but the scanner no longer works.

  I tried several times, following the line (and by telephone with a technician of Epson) instructions on downloading and installing the printer updated and drivers scanner Epson.  However, always, the installation stops and the message that drivers cannot be installed (and then restart and try again message appears).

  I was able to get the printer to work by plugging the USB cable to the printer and allowing Windows Installer the driver of the ESC/P-R, but the scanner does not work, and I did all the other characteristics of the available printer.  When I try to get the latest driver via the printer preferences, I get the message that I have already installed the most recent driver.

  More recently, I used the Troubleshooting Guide for the Epson, up to the point where it is said: ' Click or Start and select programs or all programs. "

  Select Epson or Epson printers, select your printer folder, and then select Epson Printer Software Uninstall. »

  When I do this, the program from the start menu does not have the listed Epson printer, or it displays the option to uninstall the printer.

  In addition, when I go into Control Panel, uninstall a program, the Epson printer is not as an installed printer.

  I tried once more to install the driver downloaded from the Epson site package and again, has received the message that the driver could not be installed.

  Then, I used the window update to install all the updates Windows 7, deleted the Epson printer, reconnect the USB cable and restart the computer.  Once Windows has installed the ESC/P-R driver, which she says is the last available.  I'll let it go and just not use the scanner if I can't get this resolved.

  Before you install go to start, make right click on computer, click on properties and the system window will open, left eye for click Advanced settings open then click on the Hardware tab, click installing driver and assigned to the let me select never install Windows update, and save at the bottom. You can set it back by default later if you wish. Now install the downloaded driver, have turned on printer, but do not connect the USB cable until you are prompted.