Cannot install the update froyo for a Singapore bike challenge using SSM

Hi all

I have a defy (no blurring) bike that I bought in Singapore. Now I'm in India. My network is airtel. When I connect the phone via USB and run the update of the software of bike it shows available and downloaded the update. After that he asked me to continue. Installation began, and the phone went to the bootloader mode. He continued up to 15%. Up to 15% it stopped and error. I tried 5 times and also with another sim card. I doesn't seem to work. I have the same problem again and again...

I also tried to connect my phone in wifi and tried to download, but it says "Update service unavailable this time."

My version is GAS_ASIA_USAJORDANRTINT_P030 which is supposed to get updated according to the official update thread.

Is this a problem with the SSM?

If yes how do I remedy this? Is there an alternative?

Here's the quote from https://supportforums.motorola.com/message/377672?tstart=0 that says I'll get an update

Singapore:

Retail trade, Starhub

other regions may be able to update, if the firmware of the source is one of the APflex versions below:

versions source:

GAS_ASIA_USAJORDANRTINT_P029

GAS_ASIA_USAJORDANRTINT_P030

will be upgraded to Froyo:

GAS_ASIA_USAJRDNFRYORTINT_P011

Kindly help me... Thanks in advance...

Hi all

I did atlast. Yo, I got froyo now m /.

Here is the solution.

MOTOROLA SOFTWARE UPDATE (MSU) DOESNOT WORK IN WINDOWS VISTA OR 7.

WINDOWS XP ONLY TO update YOUR PHONE.

Thanks for your replies so.

Tags: Motorola Phones

Similar Questions

  • Cannot install the update system for Xperia E1

    I can't upgrade my Xperia E1 to the latest version 20.1.A.2.13. My mobile Update Center shows me the update of the system.

    I can download the update, but when I click on install I get an error it says not able to install the new version of the software. Try again. I tried a few times download the update even but it still won't install. I don't have my phone roots.

    If anyone has experienced this? What can I do for this?

    My last Android version is KitKat.

    The error is not any reason

    eh, no one could help me.

    I finally solved it myself. I just formatted my whole phone and then I tried to update. To my amazement, he got successfully updated to this version.

  • Cannot install the update system for Windows 7 tool

    After downloading the installer from Windows 7 64 (October 2014) to "Update the tool of the system", I tried to install the program. However, "Windows Update Standalone Installer" allows you to "search for updates on this computer... "and the status bar continues to streak, but after several hours, no progress has been filed. A backup of hard drive is waiting on this program to solve the problem.

    You will need to stop the search of updated running in background. The value of the automatic updates to "never check for updates" and then restart.

    Best regards, VZ

  • In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and the second time error code 8007000D

    In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and error code 8007000D twice. How can you help me solve this problem

    0X8007000D ERROR_INVALID_DATA

    Try to manually download the update and installation
    http://www.Microsoft.com/downloads/en/results.aspx?FREETEXT=KB972145&displaylang=en&sType=s_basic

    It will not appear in your history after a manual installation, but it will show the updates installed in view area. TaurArian [MVP] 2005-2010 - Update Services

  • Cannot install the update error Code Ox800B010B

    Original title: cannot install the update

    Cannot install the update KB2686827

    Error Code Ox800B010B

    Hello

    1 have had any changes made on the computer before the show?

    2. What is the full and exact error message?

    3. when exactly you get the error message?

    4. the problem occurs for all the updates?

    Method 1:

    I suggest that return you the item and run Microsoft fix:

    Diagnose and automatically fix common problems with Windows Update

    http://support.Microsoft.com/mats/windows_update/

    Method 2:

    Test the problem in clean boot mode.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

  • Users cannot install the update of my application and impossible to reinstall the application.

    I have an App World app, the first time, it's a free app (ver: 0.9), but later I changed it for a paid app. recently, I published a new version of this app (ver: 1.0) and free package upgrade.

    But users who have installed my app when it's free cannot install the update!

    I Can't download the update. I keep getting the following error "There was a problem installing...please try again." I've retried many times and reset my device but nothing works.
    
    software shows an update to Version 1.0 from .9 however,
    the update errors out and fails to download.
    

    They tried to delete the app first, but they can not reinstall it, even if they want to buy, but App World allow them to do!

    I tried uninstalling it and now I can't reinstall it. ???
    
    I can not even reinstall from appworld.
    Let alone purchase.
    
    but i try to paid for it and when i go to do it, it dont allow me
    

    It is really strange, what do I do?

    I feel your pain, but you can't do much. This is a known issue with AppWorld during the passage of the free paid, thats why this option is no longer available for providers.

    The only way to mitigate the damage, push a paid upgrade, say version 1.1. Make sure that the upgrade price paid matches the original price of app, otherwise it would be confusing to users.

    Advantages of such an approach:

    -Users who want to pay will be able to download the upgrade, you get the money

    Disadvantages:

    -You will get a lot of negative comments from users who have as free version

    -Those who have already purchased as paid app will have to pay to upgrade too

  • Cannot install the update error

    I'm trying to update my iPhone 6 16 GB running iOS to iOS 9.3.1 9.2.1 but when I try to install the OTA update it says "cannot install the update." How could I solve this problem? The contact ID is not available because the unit is gray with a white screen and a contact ID button or space, which affects the update process?

    I would try to update via iTunes

    Connect the device using a cable to a computer (PC or Mac) running the latest version of iTunes 12.3.3

    The time that the phone is detected, choose software update

    If the phone is not detected - see here

    If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

    OR

    Please take a genius appointment at an Apple Store, or select another authorized service provider.

  • I could not install the update KB2686509 for Widows XP Pro, for the last 6 months. WHY?

    I could not install the update KB2686509 for Widows XP Pro, for the last 6 months. WHY?

    Maybe check the related threads and see why others also had problems with this update:

    http://answers.Microsoft.com/en-us/search/search?searchterm=KB2686509&CurrentScope.ForumName=&CurrentScope.filter=&askingquestion=false

    especially this thread: http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/kb2686509-repeatedly-fails-with-error-code/0deeacb6-115c-419d-ac37-03ff8927b79c

    That should answer your question about why you have a problem installing the update.

  • Cannot install the update / PC

    Cannot install the update recent-8/13/2014. I click on install now Muse disappears and nothing happens.

    Hello

    Please try to install it from the creative clouds. If creative cloud is not installed on your computer, try to install it from https://creative.adobe.com/products/creative-cloud

    Kind regards

    Aish

  • Cannot install the update of security for the Microsoft Visual C++ 2010 Redistributable Package (KB2467173)

    I can't install the update of security for the Microsoft Visual C++ 2010 Redistributable Package (KB2467173).

    According to Microsoft Update, the error code is 0 x 643.

    I tried to install the update during a clean boot without result.

    Here is the log: https://skydrive.live.com/redir?resid=DDC6388AB2460543! 117

    Hello

    Method 1
    I suggest you to run the fixit from the following link:

    The problem with Microsoft Windows Update is not working
    http://support.Microsoft.com/mats/windows_update/

    Method 2
    I would say you can do clean boot and install the update.

    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353

    Note: Make sure that you reset the computer back to normal once the diagnosis is complete.

    Method 3
    I suggest you to download and install the update from the Download Center.

    RTM of Microsoft Visual C++ 2010 redistributable MFC security update
    http://www.Microsoft.com/en-US/Download/details.aspx?ID=21576

    Method 4
    I suggest you try the steps from the following link:

    Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
    http://support.Microsoft.com/kb/2509997

    Note:
    this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: http://support.microsoft.com/kb/322756
    Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  • Cannot install the update for Windows vista (KB2718704) a safe mode or after clean window reboot

    I can't install the update for Windows vista (KB2718704), a mode without failure or after clean window reboot.

    What should I do?

    Hello

    ·         Did you do changes on the computer before the show?

    ·         You get the error message?

    ·         You are able to install other updates successfully?

    Follow these methods.

    Method 1: Temporarily disable the security software .

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

    Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

    http://www.Microsoft.com/downloads/en/default.aspx

    Method 4: Follow the steps in the article.

    How to reset the Windows Update components?

    You cannot install some programs or updates

    Note: You must take the backup of the data before performing any installation of windows.

  • Cannot install the update for adobe flash player

    I'm not able to install the update for adobe flash player on my MacBook Pro running Yosemite.  I can access adobe flash player if Opera but not able to access it via Safari.  Any suggestions?

    Thank you very much!

    Have you checked to see if it is compatible with or intended for El Capitan Yosemite?

  • Cannot install the update of security for Windows XP (KB982665)

    Original title: security update/install failures

    Siena is a re-post using the appropriate format: when I check for Microsoft updates I hit the express tab and most of the time I get the message 'install (s)' didn't like in whne I tried to download and install the 'a security update for Windows XP (KB982665)."  It is the rule, not the exception.  What should I do, please?  Thank you!

    Hi ubancosr,

    Try to download and install the update manually and check.

    Update security for Windows XP (KB982665)

    http://www.Microsoft.com/downloads/details.aspx?FamilyId=5DDB5E34-F97A-47C6-96C8-BA2ED06CCB77&displaylang=en

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Vista - Error Code: 80240016 (cannot install the update for my mouse)

    error code 80240016: updated of the mouse, I can't seem to install correctly under windows vista, HP dv9727cl laptop.
    Help please. Thank you.

    Synaptics PS/2 PORTtouchpad

    0 X 80240016 WU_E_INSTALL_NOT_ALLOWED

    Tried to install so that another installation is in progress or the system has been

    in the meantime a mandatory reboot.

    and/or

    http://support.Microsoft.com/kb/957307

    Error message when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site: "0 x 80240016.

    Windows Vista and Windows Server 2008

    Follow these steps:

    1. Close the browser Windows Update or Microsoft Update Windows.
    2. Click Start, type command prompt, in the list of results, right-clickguest, and then clickrun as administrator.
      If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    3. Type the following commands. Press ENTER after each command:
      net stop wuauserv
      net start wuauserv
    4. Close the command prompt window.
    5. Try to install updates again.

    TaurArian [MVP] 2005-2010 - Update Services

  • Cannot install the update of security for XP (973768 KB)

    I have problems to install the KB 973768 for Windows XP security update.  Does anyone have a solution to this problem?

    Hello

    1. What is the exact error that you receive when you try to install the security update?

    2 are all the other updates installed successfully?

    3. who is the antivirus program installed on your computer?

    Follow the steps mentioned below.

    Method 1: This problem occurs especially if there are conflicts between the Windows security update and the application program on your computer, mainly the antivirus program.

    Temporarily disable the antivirus program or the security on your computer and try to install the update.

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2:
    Step 1: If this does not help, put the computer in a clean boot state, and then run the update.  Follow the steps mentioned in the article mentioned below.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353           
    Please note: after troubleshooting, be sure to start your computer in normal mode.

    Step 2: Try to install the update to windows manually in the clean boot state.
    Update security for Windows XP (KB973768)
    http://www.Microsoft.com/en-US/Download/details.aspx?ID=74

Maybe you are looking for