Cannot install the update of security KB2644615

Similar Questions

• Cannot install the update of security for the Microsoft Visual C++ 2010 Redistributable Package (KB2467173)

  I can't install the update of security for the Microsoft Visual C++ 2010 Redistributable Package (KB2467173).

  According to Microsoft Update, the error code is 0 x 643.

  I tried to install the update during a clean boot without result.

  Here is the log: https://skydrive.live.com/redir?resid=DDC6388AB2460543! 117

  Hello

  Method 1
  I suggest you to run the fixit from the following link:

  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

  Method 2
  I would say you can do clean boot and install the update.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: Make sure that you reset the computer back to normal once the diagnosis is complete.

  Method 3
  I suggest you to download and install the update from the Download Center.

  RTM of Microsoft Visual C++ 2010 redistributable MFC security update
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=21576

  Method 4
  I suggest you try the steps from the following link:

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: http://support.microsoft.com/kb/322756
  Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• Cannot install the update of security KB961371

  original title: KB961371 security update

  My computer Toshiba Satellite L100, Windows XP, refused several times to install the update of security KB 961371. Fix MS it has not found any problem. What should I do to install this update correctly?

  Hi Robert,.

  From the sounds of it, an update that replaces it is now installed on your system and you should be ok without any action on your part. I'll keep an eye on your edits but to see if it reappears.

• Cannot install the update of security KB2698365, get the error message ' set up cannot copy the file msado15.dll.

  Tried several times, if I check the update log it shows canceled, have tried to disable Norton. Tried to install it manually through the Setup Wizard.  He gets up then I get the message "set up cannot copy the file msado15.dll.

  Hello

  You did changes to the computer before the show?

  Method 1
  I suggest you to run the fixit from the following link:

  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

  Method 2
  I suggest you register the Msado15.dll file required.

  a. Click Start and then click Run.
  b. in the run dialog box, type the following commands in the Open box and then click OK.

  Regsvr32.exe ">"

  The> placeholder is the absolute path of the file Msado15.dll.

  The following examples show how you can specify an absolute path:

  Regsvr32.exe "C:\Program Files\Fichiers Files\system\ado\Msado15.dll"
  
  If the Msado15.dll file is saved successfully, you receive a message similar to the following message:

  DllRegisterServer in C:\Program Files\Common Files\system\ado\Msado15.dll successful.
  c. click OK.

  Method 3
  I suggest to perform the clean boot and then try to install the updates. Clean boot will disable all of the third-party program to ensure that all third party program is not causing the problem.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: Make sure that you reset the computer back to normal once the diagnosis is complete.

  Method 4
  I would say that you can download and install the update to the clean boot from Microsoft download center.

  Update security for Windows XP (KB2698365)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30228

• Cannot install the update of security for Windows XP (KB982665)

  Original title: security update/install failures

  Siena is a re-post using the appropriate format: when I check for Microsoft updates I hit the express tab and most of the time I get the message 'install (s)' didn't like in whne I tried to download and install the 'a security update for Windows XP (KB982665)."  It is the rule, not the exception.  What should I do, please?  Thank you!

  Hi ubancosr,

  Try to download and install the update manually and check.

  Update security for Windows XP (KB982665)

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5DDB5E34-F97A-47C6-96C8-BA2ED06CCB77&displaylang=en

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install the update of security for XP (973768 KB)

  I have problems to install the KB 973768 for Windows XP security update.  Does anyone have a solution to this problem?

  Hello

  1. What is the exact error that you receive when you try to install the security update?

  2 are all the other updates installed successfully?

  3. who is the antivirus program installed on your computer?

  Follow the steps mentioned below.

  Method 1: This problem occurs especially if there are conflicts between the Windows security update and the application program on your computer, mainly the antivirus program.

  Temporarily disable the antivirus program or the security on your computer and try to install the update.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:
  Step 1: If this does not help, put the computer in a clean boot state, and then run the update.  Follow the steps mentioned in the article mentioned below.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353           
  Please note: after troubleshooting, be sure to start your computer in normal mode.

  Step 2: Try to install the update to windows manually in the clean boot state.
  Update security for Windows XP (KB973768)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=74

• Cannot install the update of security KB2707511

  A security update for window that kb2707511 does not install

  Hi Betty,.

  1. what happens when you try to install the update?

  2. you receive an error message or error code when you try to install the update?

  3. you are facing this problem with this particular update or are you facing this problem with all the updates?

  I suggest you to follow the steps and check if it helps.

  Method 1: Perform a clean boot, and then check if it helps.

  H OW to configure Windows XP to start in a "clean boot" State

  Note: Make sure you perform the steps in How to configure Windows to use a Normal startup stateto start your computer normally.

  Method 2: Follow the link and run Microsoft Fix - it, and then check if it helps.

  Diagnose and automatically fix common problems with Windows Update

  Method 3: Install manually updates, then check if it helps.

  To install updates manually by following the steps mentioned below.

  (a) go to http://www.microsoft.com/download/en/default.aspx

  (b) research updates using the KB number for the update.

  (c) download and install it.

  Method 4: Reset Windows update components, and then check if it helps.

  How to reset the Windows Update components?

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

• Windows Update cannot install the update of Security No.2686509

  Windows Update has tried about 18 times to install the 2686509 update, and it does not reach every time, how can I install it

  Hi LyneDerksen,

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         You are able to install other updates successfully?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  You cannot install some programs or updates

• Cannot install the update of security KB979402 for win2k ("Access denied" error)... help?

  for awhile now, I have not been able to install "Security Update for Windows Media Player 9 for Windows 2000 (KB979402)", through windows update. I always failed, and here are the steps I took:

  (1) tried to use windows update. the program launches, recognizes a necessary update, downloads the file and fails to install, leaving this error message:

  "the following updates were not installed:

  "Security Update for Windows Media Player 9 for Windows 2000 (KB979402).

  (2) reinstalled windows update agent according to the instructions here:

  http://social.msdn.Microsoft.com/forums/en-us/windowsdesktopsearchhelp/thread/c1d64ba5-AAA1-4EAE-AD04-d7e85418199e/

  I can't tell if windows update agent has been reinstalled successfully, but the problem persists.

  (3) tried to use http://www.update.microsoft.com/ where the file downloads but won't install.

  (4) manually downloaded "Security Update for Windows Media Player 9 for Windows 2000 (KB979402).

  tried to install, a message "error installation KB979402, Access is denied."

  5) tried to "force installation" by entering this in run:
  C:\WUAGENT\Windows2000-windowsmedia-KB979402-x86-enu.exe /wuforce

  who did get a weird window listed some "availible orders"... end, passing through update.microsoft.com again proves the update has not yet been installed. I'm now ideas. Help?

  Are you running Win2K SP4?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  ~~~~~~~~~~~~~~~~~~~~

  How to reset the Windows Update components?
  [Run the difficulty in default and aggressive mode]
  http://support.Microsoft.com/kb/971058

  NB: Access KB971058 via Internet Explorer (32-bit) only not any other browser.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot install the update of security for SQL Server 2005 Service Pack 3 (KB970892) _

  I get the guests to install this important update, but it will not be installed. I followed the instructions of troubleshooting for error 737D, but it does not work.
  Any suggestions?

  Error code when you use Windows Update or Microsoft Update to install updates on a computer on which SQL Server 2005 installed: "0x737D."
  http://support.Microsoft.com/kb/978597

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot install the update of security for Jscript 5.8 for Windows XP (KB971961), also tried the manual installation

  While were are at it, I have not been able to install this update, guard saying failed, and have also tried manual installation just in case you ask

  A security update for Jscript 5.8 for Windows XP (KB971961)

  See the section "How to get help" of http://support.microsoft.com/kb/971961

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Security customer includes home links page free security update support, too
  https://consumersecuritysupport.Microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot install the update of security for Windows XP (KB2686509)

  original title: why my XP pro does not accept the following security update? Update security for Windows XP (KB2686509)

  Hello

  I'm not really very good which is why I chose to use automatic updates. I recently got 'updates are ready for your computer' and when I start to download it stops pretty quickly and said:

  The following updates have not been installed.

  Update security for Windows XP (KB2686509)

  Is there a wat to fix this problem without needing to know the registrys etc.

  Thank you

  Mick

  See my post on the third page of this topic which contains detailed instructions for anyone with this problem. Go to the bottom of this page and click Next until you get to page three.

  

  Thanks for the update Mick. You should be able to double-click the file to open it in the command prompt. I did not write the script, so I can't tell you why you were unable to launch it by double clicking. Right click and choose to run it in command line will still work.

  @ Icom756pro I do not work for Microsoft, then you would be best suited to forward your complaint directly to them. I understand your frustration, however. I can only recommend that you try the script that I've linked to page 1 of this topic. If this does not resolve the problem then simply hide the update. You should not be prompted to install later.

• Cannot install the update of security for Microsoft Office System 2007 (KB2288931): cannot install: error message: Code 646

  Performance of Norton Internet Security

  A KB was created for 646 error code that appears during the installation of the updates of Microsoft Office. The KB includes an automatedMicrosoft fix 50461 that corrects the problem. Look at the following KB:http://support.microsoft.com/kb/2258121>http://snipurl.com/164ypp>

  Suggest you download and save the fix it.

  Then close all open programs and browsers before running MSFix it 50461.msi.

• Cannot install the update of security for MS Works 9

  I tried to install this update over 90 times and it won't install and I get an "unknown error code.  Any ideas?

  Give it a try and see if it solves the problem:
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/c7d16677-808F-43D5-b7e1-e22ab3d75d83>

• Cannot install the update of security for Microsoft Visual Stdio 2008 Service Pack 1 (KB971092)

  My OS is Windows Server 2008 R2 x 64, since I can't found for the Windows Server 2008 Forum, so I post here. Sorry for that.

  I get the error code is code 646 Windows Update has encountered an unknown error.

  I tried to download the update locally and tried to install, but the attempt also fails.

  
  

  Anyone faced this problem? Please kindly give me some advice. Thank you.

  
  

  Best regards

  cchitsiang

  Hi Cchitsiang,

  The question you have posted is related to the installation of the updates in Windows Server 2008 and would be better suited to the Microsoft TechNet community. Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

  I hope this helps.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.