Cannot install the Windows Fax Service

Similar Questions

• My windows firewall does not illuminate. Windows cannot start the Windows firewall Service ICS.

  How can I solve unless I need to have this problem to download protection software.

  Hi Octavia10,
   
  -What version of service pack of Windows XP you are using?
   
  Try the methods listed in the given article to resolve this problem:
  You cannot start the Windows Firewall service in Windows XP SP2
   
  Note: The steps are applicable to the other version of Windows XP as well.

• The Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  original title: The Audio service is not running windows vista

  Hello

  I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  I saw it in Event Viewer

  The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

  Thank you

  -Majid

  original title: The Audio service is not running windows vista

  Hello

  I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  I saw it in Event Viewer

  The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

  Thank you

  -Majid

  These error messages are a pain in the neck to extract useful information.

  I suggest that you do a search online 'pilot audio free downloads' and find another audio program for your PC.

  If you find something that works for your satisfaction - remove your original pain in neck audio software and make sure you make your audio program newly found the 'default' device.

  Realtek and NVIDIA, for example get stuff good free audio driver.

  If the new program does not work - it would be a good indication that you have hardware on your PC, drive problems and no amount of play more with to try to correct the audio software will help. Period

• Cannot install the vCenter agent service. Cannot download agent.

  I have a little trouble with three of my ESX servers. I'm in vCenter Server 4.0.0 162856. I have three clusters that I am currently using. One is my cluster of blade test environment on our old equipment on our internal network (running ESX 3.5). One is our new cluster of blade on our internal network. The final (and) I have a problem) are the pole of blade on our external network. The new run ESX 4.0.

  When I tried to add new hosts to our new cluster of blade on the internal network, everything went relatively well. I am trying to simply add hosts to the cluster on the external network, but every time, I get the "cannot install the agent vCenter. service '. Error failed to download agent. I read on the web that this can happen sporadically and try to remove/put on your ESX servers. I tried with all three, and no download. I first thought that the hard drives of my hosts were too small because I am booting from SAN and dug 25 GB drives strictly to the operating system. So, I tried 50 GB hard drives, and that did not help.

  My guess is that it may be some sort of firewall issue and asked our network guys to unblock the ports 902, 905 and 8443. Still, this does not seem to help. I checked the file/etc/hosts and three servers, the vCenter server, and the server for the backup is defined in there. I also tried removing and time of the cluster. The only thing that does not work I don't know a ping servers that are defined in the hosts file works (but not other local servers) is vmkping, which gives a * not configured vmkernel stack * error.

  Someone at - it ideas? Do you think it's firewall or vmkernel associated? My understanding is that the vmkernel would begin after it is attached to a host, but I could be wrong on this matter.

  Thanks to all who help!

  There are also port 443

  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru

• Cannot install the Windows SDK

  I try to install the Windows SDK for Windows 7 with .NET Framework 4 on a DVD.  Installation takes place in short a while then Setup stops and inflicts a cleanup at the.  I get a window "Installation Failed" with a message telling me to "refer to Samples\Setup\HTML\ConfigDetails.htm document for more information."  However, the cleaning process removes this document so it is impossible for me to see.  I saved the log file "SDKSetup_7.0.6918.0.log" but it's over a length of 1000 rows.  I'll be happy to send it to you if you wish!  I have made several attempts to install from the DVD I burned the ISO file downloaded and on the web.  I get the same result every time.  What do you suggest me?

  I found through research more than others have discovered that the SDK will not install anything it either if it finds a later version of the redistributable C running pre-installed libraries.  I had to uninstall the C libraries, then install the SDK and then do a MS update to get the latest patches for the runtime libraries.  Frankly, it seems pretty stupid to me.  At the very least, the installation should give a comprehensible message on why it would not be installed.

  -mbmark

• The Windows fax service cannot start because there is no such thing as a privilege in the fax service account.

  I'm trying to set up Windows Fax and Scan to store faxes "received" in a folder encrypted (EFS). (I use Windows Vista Business).

  The fax service will not start if it set to log on as a "local system account", but faxes are stored with the certificate of local system and inaccessible to other users.

  To work around this problem, I tried to configure the Fax Service to log on under a specific user account. However, after that and try to re - start the Service I get.

  Error: 1297 as a service privilege is needed to function properly does not exist in the service account configuration.

  One of the services that begins with the "local system account" does not automatically start with a normal user account and if you get the message.  Most of the services are designed to start with the local system account and not a special user account (actually, not on my system using a specific user account for services).  I think that part is OK and you must return it to the local system account (so eliminate the error message and remove that as a problem to solve).

  I think the question may also be a permissions problem in the user access to the fax.

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.  To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  You can change now switched to read-only (even if the main folder indicates that they are always read-only - you can access yourself as the owner).  You can keep them in read-only to other users, customers and administrators even (although they can support themselves and access, if they wish, and it is really not that you can do to stop it except protect the file with a password by using a 3rd party product.)  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.  To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  If that is indeed a problem of certificates (and it seems there is a but looks like he takes care of himself with the Wizard), then we must make the certificate available to all users of the system (from where it is now stored) - and I think I saw how to do this in secpol.msc.  Here is some information I found on EFS secpol.msc in the public key policies (you can get it by entering this in the area of research and the antering and then a double click on the program icon that appears) where you would put in place.

  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  The Encrypting File System (EFS) is an encryption technology of base file used to store the encrypted files on NTFS file system volumes. Encrypted files cannot be used unless the user has access to the keys needed to decrypt the information.

  Encryption is transparent to the user that encrypted the file. This means that you don't have to manually decrypt the encrypted file before that you can use. You can open and edit the file as you normally would. Once you encrypt a file or folder, you work with the encrypted file, or a folder like you do with any other file or folder.

  The use of EFS is similar to using permissions on files and folders. Both methods can be used to restrict access to the data. However, an attacker who gets physical access unauthorized to your encrypted files or folders will be prevented from reading. If the intruder tries to open or copy your encrypted file or folder, he or she receives an access denied message. Permissions on files and folders do not protect against unauthorized physical attacks.

  You encrypt or decrypt a folder or file by setting the property of encryption for files and folders, as you define another attribute such as read-only, compressed, or hidden. If you encrypt a folder, all files and subfolders created in the encrypted folder are automatically encrypted. It is recommended that you encrypt at the folder level.

  You can also encrypt or decrypt a file or folder using the Cipher command.

  When you work with encrypted files and folders, keep in mind the following information:

  • Only the files and folders on NTFS volumes can be encrypted. However, you can use Web distributed authoring and versioning (WebDAV), which also works with NTFS, to transfer files in encrypted form.
  • Files or compressed files can also be encrypted. If the user marks a file or folder for encryption, that file or folder will be uncompressed.
  • Encrypted files are decrypted if you copy or move the file to a volume that is not an NTFS volume.
  • Moving files unencrypted in an encrypted folder will automatically cause these files to be encrypted in the new folder. However, the reverse will not automatically decrypt files. The files must be explicitly decrypted.
  • Files marked with the system attribute cannot be encrypted, nor can files in the system root directory structure.
  • Encrypt a file or a folder does not protect against the removal or the list of files or directories. Anyone with the appropriate permissions can delete or list encrypted folders or files. For this reason, the use of EFS in combination with NTFS permissions is recommended.
  • You can encrypt or decrypt files and files located on a remote computer that has been enabled for remote encryption, but, in this version of Windows, the data that is transmitted over the network by this process is not encrypted. Other protocols, such as Secure Socket Layer/Transport Layer Security (SSL/TLS) or Internet Protocol security (IPsec) must be used to encrypt data while they are transmitted over the network. (You can also use WebDAV, as described in the first bullet, to pass the file in encrypted form.)

  EFS policy settings

  You can use Group Policy to configure a number of EFS settings.

  Allow or disallow the EFS

  You can choose to allow or prohibit the use of EFS altogether. If you do not configure the policy settings for EFS, it is OK.

  The EFS options

  If you choose to allow EFS, you can also select a number of options, such as whether to automatically encrypt the Documents folder of the user, to require a smart card for use with EFS, to cache keys created based on a smart card, to enable the encryption of the Windows page file, or to notify users to make the backup copies of their encryption keys.

  EFS certificate

  EFS encryption is based on the pairs of keys associated with certificates. In most managed environments, the certificates are issued by a certification authority (CA) running in the field. Users can automatically be issued a certificate from the CA without manual intervention. EFS settings include a drop-down models of certificates that are available in the field list so that you can specify which certificate template to use for autoenrollment.

  Note
  	The list includes all the models of certificates, present in the field. An administrator must configure the CA so that certificates can be issued. Some displayed certificates are not available.

  In cases where a certificate cannot be issued by a certification authority, EFS can use a self-signed certificate created on the local computer (there is a section in secpol.msc to create a certificate). You can choose to disable this functionality and specify a default key length.

  -------------------------------------------------------------------------------------------------------------------------------------------------------------------

  I don't know if that helped or not.  Please let us know and be specific about what other questions, you may have because I don't know what you mean and which is still confusing (and to be honest, I am a little confused at this point - it is not an easy task to accomplish).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / A +.

• j can't install the windows vista service Pack 1 KB936330 update

  EVERY TIME I TRY TO INSTALL ABOVE UPDATE J'M UNBABLE TO DO

  Gianni reina, what error messages if one is to receive you during the installation of the service pack?

  You use Windows Update agent to run the download and installation?
  If so go ahead and download it manually, and then boot into boot and apply the update:

  Download the stand-alone update: x 64 | x 86

  Determine if you are running 32-bit or 64-bit:

  Click Start -> click right computer -> select Properties. In the window System , under System , next to system type: it will show you, 32-bit or 64-bit operating system .

  Click Start , type msconfig in the Search box and press ENTER. (If you are prompted for an administrator password or a confirmation, type the password, or click continue .)

  On the general tab, click Selective startup .

  Under Selective startup , clear the Load Startup items check box.

  Click the Services tab, select the hide all Microsoft Services check box, and then click disable all .

  Click OK .

  When you are prompted, click restart .

  Log on to your account.

  ---------------------------------------------------

  Try now update again: click Start -> all programs click-> click on Windows Update , click check for updates and install one that is found.

  If you wish you can also try the update of the manual installation file, you have downloaded from the previous mentioned link.

  ---------------------------------------------------

  To restore your Normal startup:

  Click Start , type msconfig in the Search box and press ENTER. (If you are prompted for an administrator password or a confirmation, type the password, or click continue .)

  On the general tab, click Normal startup .

  When you are prompted, click restart .

  ---------------------------------------------------

  Once you have tested these steps, post your results so that we will know if they succeeded.

  Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install the Windows Server 2012, hard disk not found driver DC

  during the installation of the windows server Datacenter edition 2012 on HP desktop using a USB flash drive I do not get the list of the hard drive for formatting and install an operating system on it. Help, please.

  Server issues are better managed to the:

  http://social.technet.Microsoft.com/forums/en-us/home

  So please post your request there.

• Cannot install the windows version of Creative suite, illustrator CS5.5

  Impossible to install the creative suite Illustrator CS5.5, the full version of windows, I tried to uninstall reinstall, the same message comes back, the Exit Code 6, caveat: DW065, display requirements not met, Fatal: DS003, DW036 warning / error: AW050. I tried to remove some programs, the same message, even tried to install the Illustrator himself, same thing, what is the solution? Nick

  Well, it's pretty clear: you are trying to install on a screen too small. Run the Creative Suite cleanup tool and taken into account:

  Errors ' Exit Code: 6, "" Exit Code: 7 ".

  Try reinstalling, but really, make sure that you meet the system requirements. I requires a screen resolution of 1200 x 800.

  Mylenium

• Cannot install the windows updates with error 80240016 and 646 code

  I tried to download updates manually and automatically. There are 14 of them, but nothing helped. I have a windows vista OS and I tried to find the error codes in line staring at me but still not joy. can help you. all updates, I think that refer to microsoft office and the student that is installed on my computor.

  Hi Tina500,

  Thank you for using the Microsoft Windows Vista Forums.

  You probably found this error message because

  Windows Installer is outdated.

  Here is a link to an article that addresses this issue

  http://support.Microsoft.com/kb/957308

  If please reply and let us know if your problem is resolved or if you need further assistance

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• Cannot install the Windows update error code: 0x80072efd.

  OT: Laptop problems.

  I have the following problems: has) the update of Windows Defender does not work, always ends upward with an error code: 0x80072efd,.

  (b) installation of Windows Update problem is not solve itself now for some time - quite impossible update.

  Windows Update error 80072efd
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80072efd

  or

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

• Cannot install the Windows Home Server Vail connector

  WHS vail connector installation

  Hello fishman6709,

  Look at the post in the forum TechNet on the WHS vail connector installation failed.
  http://social.Microsoft.com/forums/en-us/whsvailbeta/thread/a8a22981-353A-497b-8c40-1e346e514e92

  You can post in the forums of Windows Home Server for better support. http://social.Microsoft.com/forums/en-us/category/WindowsHomeServer/

  I hope this helps.

  Thank you

• nitro loading a pdf editor and this error comes we - error cannot install the single window service

  someone sees this error I'm not able to load my nitro now and it has always worked.  error saying error-could not install the stop service my other programs such as microsoft office.

  Hi Sandra,.

  Thanks for posting in the Microsoft community

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  I suggest you try the steps from the following link:

  Q10271 - PRB: error: cannot install the Windows Service
  http://KB.nitropdf.com/article.aspx?ID=10271

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• "The Windows Installer Service could not be accessed. This can happen if Windows install is not properly installed. Contact your support team. »

  I use Vista 64 Ultimate.

  The last item I have installed is iTunes 8. I managed to install, but a few hours later the error pops up.

  I can download is nothing more.
  I can't install anything.

  When I go into computer management and try manually a start, I get this:
  "Windows cannot start the Windows Installer service on Local computer.       "Error 216: 0xd8.

  I can't update anything.

  As I said earlier, when I try to download anything, it looks like it is downloading but no files appear in fact where they should be.

  Please help, I have ALL my work on this computer and I didn't save anything. :(

  Hi VVinter

  Thank you for using the Microsoft Answers Forums!

  We can try a few steps listed below and check.

  Step 1:

  Run an on-line analysis of your PC of malicious software:

  If you want to scan your computer for malware and potentially unwanted on a Web site, please use the Windows Live OneCare safety scanner.

  You can also run Anti-Malware on your computer. Follow the steps in this link:

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Step 2: Windows Service install

  To check if the Windows Installer service is set to Disable, follow these steps:

  1. Click Start, click run, type services.msc in the Open text box, and then click OK.
  2. In the list of Services (Local) , right-click Windows Installer, and then click Properties.
  3. If the drop-down list Startup type is set to the value off, select the Manual option in the drop-down list Startup type , Start the service and then click OK.
  4. Click the file menu, and then click exit.

  You can also try to download the latest Windows Installer and install it:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Note: Uninstall one already present in your system to-> program and features in the control panel.

  Hope this information was useful.

  Let me know if it worked.

  All the best!

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• "Error 1719. Able to access the Windows Installer Service"when you install programs.

  After spending the last week every night trying to get some software installed (and of course the search for remedies in probably all available forums), I let go and post this request for assistance. But first my story:

  I have lived the last week suddenly my Neat Receipts software does not recognize my scanner more. Trying to reinstall the software, I came across the error that Windows Installer could not be started. That's when I started first for solutions. I was surprised how many solutions I found (but more redoubled practically the same thing), but none did it for me. At this point, I was always under the assumption that it is a problem of the Neat Receipts software.

  Then after another night of frustration I could not pass my trial version Office 2010 plus a sort of license error. I was a little surprised that the trial version which abruptly ended without giving me the opportunity to enter a license key (I got wrong), but doesn't bother too much because I liked the product and had noticed last week as well as Office 2010 is already officially released and I decided to buy it. After spending about $300 and a successful upload, I tried to install it.

  And here my saga continues. First I got the message that I couldn't upgrade my trial version and need to uninstall. Uninstall with the uninstaller routine does not work (windows error message install), but I could uninstall it using the Windows-Install-Clean-Up utility. Now, I can start the installation process, but after being nearly halfway through the installation, I again get the error of Windows install the Windows Installer Service cannot be accessed (Error 1719). It is roughly the same error that I got at the beginning, when I tried to reinstall the software, Neat receipts. So, it seems not to be a misapplication of Neat receipts or Office 2010, but a windows problem.

  The frustrating thing however is that after spending all hours searching online for solutions, the only thing I've discovered is that I am in good company (i.e. There are many others have reported the same problem), but none of the solutions work. Just to be safe, do not for get the same Advisor I tried already several times, let me enumerate what I've done so far:

  1. I am logged on as administrator

  2 - I started the Windows Installer service

  3 - I ran SCF /sannow (no problems found)

  4. I not saved and re-entered the msiecec with / opt and/regserver. I did so explicitly for BOTH (!) msiexec programs, one in the system32 folder and the one in the sysWOW64 folder

  5. I tried to repair Windows 7 boot from the windows 7 installation DVD and run the option repair (no problem found)

  6. I tried to pass the parameter registry WOW64 (for MSIServer) from 1 to 0 (I found this in one of the suggested solutions) [and later again back to the original value 1]

  7. I tried to 'force' windows to ignore the msiexec for 64 bit (in the system32 folder) by renaming and by identifying the msiexec for 32 bit 9 in the sysWOW64 folder) and update the path regsever C:\Windows\system32\msiexec.exe \V to C:\Windows\syswow64\msiexec.exe \V

  8 - I disabled my firewall and antivirus

  9 - I did everything above in many variations with reset (both the save option - reboot)

  -in fact, I could do things more I can't remember.

  Unfortunately a recovery is not an option most, because I guess I tried too many things and my view of the possible return is a point in which my computer was already in place...

  I tried to involve as well a representative of Microsoft support explaining my dilemma, but only made e-mail a generic response on this same forum (great customer service!).

  While I was actually pretty happy in the last 4 months with my new Windows7 (and thus Office2010), I am now reaching the point where I fell like throwing finally the towel and kiss goodbye to Microsoft. I was seriously considering to move to Apple before decide me in February favor some cheaper hardware to continue with Microsoft and the new Windows7. But this experience not being able to fix my computer after spending nights in the search for solutions and not be able to get support from Microsoft disgusts me.

  Now I wonder if there is someone out there who could help me out here...

  Of course, the .msi applies only to installers .msi, which was my mistake for which I apologize.  Regarding a clean installation, the fact remains that you have faced this anomaly for several days, a clean install, despite the pain, would be a distant memory now.  This is my personal opinion, not Microsoft, they me disavowed a long time ago, in all cases MVPS have nothing to do with Microsoft, although the price is published by Microsoft, it is awarded for the caregiver, or in this case try to help others.  It is good that I can at least allow you to vent, it's better out there that maintenus kept bottled upward, no matter how hard it seems to fix the problem, it will be resolved in your favor by subsequently, one way or the other.

  In pursuing the side of permissions of things you can try that if you wish.

  This example may or may not work for you, with your program?

  "It seems that the"Run as Administrator"command gives you administrative privileges only, and they are not enough to install Java (and OpenOffice, by association). To work around this problem, you must actually connect to an administrator. Open a command prompt with admin rights by clicking Start, type cmd in the search/run box, hit CTRL-SHIFT-ENTER. At the prompt, type:

  NET user administrator / Active: Yes

  Then disconnect from your regular account and record as an administrator, you should be able to install the program. When you are finished, open a session to your regular account and, for security reasons, disabling the account administrator for assistance:

  «net user administrator / active: No.»

  http://user.Services.OpenOffice.org/en/forum/viewtopic.php?f=15&t=11706#p55879

  See if this program you can tell what is happening with the failure of the Office to install.

  Process Monitor v2.8
  http://TechNet.Microsoft.com/en-AU/Sysinternals/bb896645.aspx

  Process monitor Forum
  http://Forum.sysinternals.com/forum_topics.asp?FID=19

  Need tutorial for Process Monitor
  http://Forum.sysinternals.com/forum_posts.asp?tid=13724

  If it was purchased through the Office Online web store?

  If so, you may need to return to this site at http://office.microsoft.com/en-us/products/ click on the link buy Microsoft Office 2010 today.   Then click on the buy now button to your product...  When you arrive on the "Items in your shopping cart" page, look for the link to the FAQ at the top of the page.  Click on FAQ.  When it opens do scroll to 'Customer Service '.

  Customer support

  What is your refund policy?

  Microsoft products purchased through the Office Online web store are eligible for return within 30 days of the purchase date. Taxes paid will be refunded on eligible returns.
  Among the exceptions to this return policy: Microsoft backup CD/DVD are not refundable and are not included in our 30 day guarantee.

  How can I request a refund?

  To obtain a refund for digital product please click here {web page link} to access your order history information. Click the Order Details of the order for which you want to request a refund. Use the option «back»

  When will be the reimbursement of the credit?

  Your refund credit will appear on your credit card within five to seven working days after we receive your letter filled with destruction. If a different payment method has been used, the duration can vary.