Cannot install trial after the hard drive was erased [was: help!]

Similar Questions

• Satellite A200-137 - cannot install windows after the hard disk crash

  last week my a200-137 crashed and now I have the new hitachi 500 GB hard drive on it, even before the accident.
  I have install with Toshiba recovery DVD windows Vista on it and after succesfull installed I have to start windows, it says prepare for first use windows then I have to wait a while and then I get the message that windows setup is not complete. But it is complete!

  After trying to install 3 times with recovert I tried to install windows xp.
  After a few minutes and transering files, I don't get the message no disc found! It is said that there is no hard drive on the laptop!
  But when I start the start menu or the settings menu, I can see the 500 GB Hitachi hard drive!

  So why windows can't find hard disk and why can't I start windowds visat after installing with the recovery dvd?

  > So why windows can't find hard disk and why can't I start windowds visat after installing with the recovery dvd?
  On this virtual path, it is not easy to say why you can not install recovery image. It would be interesting to know if the same thing will happen when you replace the HARD with the same or identical.
  This title was the original HARD drive?
  If possible, try to get original Microsoft installation disc and check if the HARD drive will be recognized by Vista or Win7 and of course if you will be able to install and boot OS preinstalled.

  Regarding the installation of Windows XP Home edition: it is well known that the WXP installation will start properly due to lack of SATA driver that must be loaded prior to installation of WXP begins.
  Check out this forum and you will find hundreds of threads with detailed explanation why this happen and what can you do about it.

• Satellite L300D-242 - cannot install Vista after replacing HARD drive

  Hi wonder if anyone can help mei have a L300D_242 toshiba satellite that broke down and I bought a new hard drive for it because the original was not good.

  I tried to install a Vista premium 32 bit on the new hard drive, but it does not install until the 4th stage and then stops or hangs until he finishes.

  Does anyone know how to install a new hard drive and windows on this laptop?

  Thank you

  Hello

  What Vista did you use? TOSHIBA recovery disk or a disk of Microsoft Vista?
  Format you the new HARD disk before starting the installation of Vista?

  It is possible that the new HARD drive is not good and therefore the system can not be installed properly
  You can check the drive HARD using a tool called Drive Fitness Test download this as its a freeware program and test your HARD drive.

• Re-installing Photoshop after the hard drive crashed

  My hard drive crashed and I replaced it, but now I have to reinstall all my purchased applications.  I'm trying to re - install Adobe Photoshop Lightroom 4 but my computer keeps spitting out the disc.  Is it possible to download the program online if I have the product key?

  There are two options for downloading Lightroom 4:

  Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5566
  PC: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5567

  There should also be links for Lightroom 4 the page following the link:

  http://prodesigntools.com/Adobe-Lightroom-4-is-out.html#DDL

  Remember to follow the instructions for signing in or otherwise downloads is not treated correctly.  If you visit one of the other pages on this site they have a section entitled "Note: very important instructions" which gives precise measurements for signature for download.

• Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.

  Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.

  On Sunday July 25, 2010 10:11:30 + 0000, pc_novice wrote:

  Hi Gordon

  I just downloaded drivers from the Dell website in support of xp

  I have tried to reboot from the XP cd but got the following message when I tried to install

  "This program is blocked due to compatibility issues"

  Program - the installer of Windows

  Editor - Microsoft

  Location: D:\1386\winnt32.exe

  Setup cannot continue because the version of Windows on your computer is newer than the version on the cd. If you decide to remove the version latest Windows that is currently installed the files and settings cannot be recovered"

  I don't want Windows 7 at all so I'm ready to lose all data, so how can I do to remove it?

  You say that you have started from the XP CD, but something is wrong with that
  you do. Just boot from the CD and follow the prompts for a
  clean install. A new installation by formatting the
  drive and does not care what version of Windows is installed (or
  even if any version of Windows is installed.

  Ken Blake

• After the hard drive failed, I changed my computer and reinstalled LR5. I've updated LR5 a few weeks before my computer crashed, so for you my serial number is up-to-date. After having read a few tutorials, I suspect this deactivation were not made before

  After the hard drive failed, I changed my computer and reinstalled LR5. I've updated LR5 a few weeks before my computer crashed, so for you my serial number is up-to-date. After reading some tutorials, I'm suspecting this disabling was not made before reinstalling... Recommendations on resettlement in this case?

  You actually have a renewal LR5 problem or ask yourself what you need to do?

  Download and install the update LR 5.6 from here: http://www.adobe.com/downloads/updates

  Enter your LR 5 serial number and you should be ready.  If something doesn't work, then, please describe the problem in detail.

• How can I reinstall Photoshop CS5 after the hard drive on my iMac replaced?

  How to reinstall or download Photoshop CS5 after the hard drive on my iMac replaced?

  Hi hawkejo1,

  Please install Photoshop CS 5 from the following link: Download CS5 products

  And it to authenticate with the serial number.

  Kind regards

  Tanuj

• How to re - install Acrobat after that hard drive has been replaced?

  I bought and installed Acrobat XI in June. Shortly after the hard drive on my laptop had to be replaced and I now need to reinstall. Can I do this using the original code, as if the installation of a new product, or what I need to do something different? Please notify

  Yes, just use the installer and the original series.

  Mylenium

• Ugggh.  I have a 27-inch iMac late 2011 and the hard drive was updated with a new SSD.  The integrated cd/dvd had to be taken out.  I then bought a thought of superdrive, it should work.  It's frozen on my iMac!

  Ugggh.  I have a 27-inch iMac late 2011 and the hard drive was updated with a new SSD.  The integrated cd/dvd had to be taken out.  I then bought a thought of superdrive, it should work.  It's frozen on my iMac!  Gee, who could have possibly guessed that would happen?  I tried all kinds of silly workarounds, I found on the internet, but still it will not register the stack of DVDs and other discs I have.

  If you're like me and upgraded your iMac that came with a cd/dvd drive internal... so he has to come out to give way to the fusion or the SSD drive, do NOT buy the apple superdrive.  It will work with your computer!

  Think I'll get a laptop samsung...

  Ironic, isn't it? Own Apple SuperDrive will not work with Apple computers. Shame you don't check here first that we would have warned you. Return Apple overpriced and buy a nice third-party player for a third of the price. I love the LG units. You can consider a loading plate because they are more reliable, and you can use these pesky disc when you get one.

• Unable to see the number of files on the hard disk on Windows 7 computer after the hard drive crashed windows xp system

  Original title: unable to see many folders on separate conputer

  I was using windows xp with service pack 3 and windows 7 on a separate booklets. Suddenly the laptop with XP crashed... The hard drive was Ok - cased with a USB port, but now on the connection with the computer laptop windows7 I saw no many records there - pls help

  the system crashed in fact as I was reading the (visualization of the pictures - JPEG, bmp and also some books .pdf) & suddenly.  In the Xp laptop NVIDIA graphics card was there.  He lacked RECENT documents, I see

  Hello

  Try the methods provided below and check if the problem persists.

  Method 1:

  You can make the disk check to make sure that the hard disk is not damaged.

  See the link below for more information on disk error checking in Windows XP.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note:

  Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  Method 2:

  This issue could also be linked to the virus/malware on the hard drive that may have caused the crash of the system.

  Click on the link below to download and run a full scan of the system using the Microsoft Safety Scanner.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:

  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• My previous version of windows (which is already installed on the hard drive) will erase if I boot from a bootable USB. Please help me!

  I have Windows 8 is installed and an iso of Windows 8.1 on my USB.

  My previous version of windows (which is already installed on the hard drive) will erase if I boot from a bootable USB. Please help me!

  When you upgrade to 8.1 Windows it will replace your Windows 8.0. The only way I know to have both is to buy a copy of Windows 8.1 and install on another partition or drive.  Hope this helps and if you need another post to help and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum.

  "When we try to take anything by itself, we find it hitched to everything else in the universe." -John Muir

• Cannot install on my computer, hard drive, cleaned the suite creative cloud

  Hello

  I bought a CC student edition and teacher (one-year) (MONTH) in November 2015, pay £12.38 per month, which was duly would be debited from my account every month for 3 months now

  & 4th due payment shortly.

  Last week my computer could not start and after much trying, scheduled at PC World, which sent them away. It was returned fixed, but the contents of the hard drive has been completely erased from any software, including CC.

  I logged on the Adobe site tonight thinking I would just re - download the software on my computer.

  When I connect & watch "display your products, its lists my plan as"Creative Cloud free membership ', inviting me to upgrade to paid membership CC!

  & when I "view orders", there is no record of my order in Nov 15-

  & I don't see how to download Creative Cloud (which is NOT a trial version).

  Help please?

  
  

  Are you sure that you look at the correct Adobe ID to 100%?

  Or did you use another (school)? ID for your subscription?

  In any case, you must contact Adobe directly

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Windows Update does not work after the hard drive has been replaced

  Hello
  I have the same problem, replaced in my Toshiba HD, rebuild from Sysimage, Windows Update does not work. A ran "fix the problem with the Microsoft Windows Update is not working.
  Problem still exist.
  The message that I got while trying to update: "Windows Update cannot currently check updates,
  because the service is not running. "You may need to restart you computer.
  Stop and then restart the service, still no luck.

  I ran Windows troubleshooting. He finds two problems with Windows Update components, it corrects.
  The problem still exists.

  The other post:

  Another interesting fact:
  After the reconstruction the new disk, user account control does not recognize Windows programs.
  for example: execution of Perfmon.exe, the Publisher is unknown! However, when I download the program Windows FixIt, Publisher is recognized as Microsoft Windows. It seems that user account control does not recognize the Windows programs that had found the new HD, but acknowledges those who is downloaded from the internet.
  I guess there is a problem with the license, Windows was preinstalled on the Toshiba and replace the hard drive could have caused a few conflicts of licensing.

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/Windows-Update-not-working-after-hard-drive/77ab54ca-34b0-49DF-a268-bd07db68d887

  The same problem. Cloned old HD on a larger hard drive. Everything worked perfectly except NO indexing and update WITHOUT windows - the two recurring problems that seem to appear on the forums after a change of hard disk.

  INDEXING resolved with change to "Intel rapid storage technology." Google what I put in quotes, choose the Download Center and get the specific to your OP and the controller software.

  UPDATES have been a little more frustrating. The microsoft .fixes and convenience stores were without help.

  Go to control panel / system and Maintenance / administration tools

  Select Services

  Stop the Background Intelligent Transfer Service

  Stop Windows Update

  In 'My Computer' go to Windows / Software Distribution

  Right-click "DataStore" folder. Rename it to Datastore.old

  Rename the folder 'Download' Download.old

  Return to Services and restart the Background Intelligent Transfer Service and Windows Update.

  Look for the updates. It will take some time because you deleted the database.

  I hope this helps!

• Satellite L40 cannot start or recognize the hard drive

  Hi all

  I bought a new Satellite L40 without windows or CD come with him,
  so now when I put the Xp CD, the drive cannot recognized the hard drive or a CD-Rom.

  error message
  Reboot and select boot device prober, or insert boot media in selected boot device and press a KEY.

  I'm not saying any key LOL
  It suppose to be all LOL key to

  Please your help in this matter

  Here another thread about the installation of the SATA drivers!
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26040

  You must include the * Intel Matrix Storage Manager * during the XP installation process.
  As far as I know you have to press the F6 key to include the external USB FDD drive driver.
  Once you have included the SATA driver * DON T format the drive HARD * or create all partitions because that would erase the included driver!

  Another possibility to include the SATA drivers is the use of the * software to nLite.
  By using this software, you could include the SATA driver in the new created XP CD.
  And then you could boot from the new CD.

  > no initialization of SPARCFichiers of hard disk
  > can not load hard drive
  > Insert systemdisk and press a key

  This error message appears because you didn't boot from the bootable CD and/or the operating system has not been installed on the HARD drive and the laptop I wanted to boot from the HARD drive.

• My office wouldn't boot and I received a S.M.A.R.T. message that told me that the hard drive was bad. I changed the hard drive, but it is always the same. It is running windows zp.

  My desktop computer running windows xp. It begins to start but stops and keeps trying to start. It does not start in safe mode or any other mode. I have mfoundm a message that says S.M.A.R.T. and told me that my hard drive was bad. I replaced the drive hard drive with another drive that has been loaded with xp but it stil is.

  I think that the answer to the replacement hard drive is in your question.

  I replaced the drive hard drive with another drive that has been loaded with xp but it stil is.

  You can not take a hard drive that was in another computer when the Windows installation, place it in another computer and boot from it. You will get a boot loop. It will start to load Windows then suddenly, re - start. This will be repeated again and again. You must install Windows on the disk hard while it is in the computer that you intend to use it with.