Cannot install Ubuntu

Similar Questions

• Satellite A300 - cannot install Ubuntu - empty flashing command

  Hello

  I want to install Ubuntu 11.10 on my Satellite A300 (psag4e), but when I insert the installation CD, boot hangs after this part of Toshiba with a flashing empty command line.

  What should I do?

  The value of the default BIOS and try again.
  Are you using the original Linux installation disc?

• Cannot install Ubuntu 11.04 on Satellite L650-I5310

  I can't install ubuntu 11.04 in my system. I see, on start up the ubuntu display. Then it will not work. But I can't install ubuntu 8.04 with any problem.

  A year before I used ubuntu in dual boot mode.
  I don't remember the version. but at that time, some of my option of system like bluetooth, camera etc. were not working.

  So I removed ubuntu. now, I've heard 11.04 is more full of power. I would like to install 11.04 in mode dual boot.
  I downloaded 11.04 32-bit version and writes in a dvd using creater toshiba drive.

  Please help me.

  Hello

  Perhaps the problem is the created disc of Ubuntu.
  Try to install Ubuntu on the USB.

  Here's a nice HowTo that I found in the internet.
  http://blog.sudobits.com/2011/04/23/how-to-install-Ubuntu-11-04-from-USB-or-CD/

• Cannot install Ubuntu 14.04.2 on Acer Aspire E5 - 511G with Windows 8

  Hello. I have tried everything I can to install Ubuntu 14.04.2 alongside Windows 8 on my laptop and I'm not going to be successful. I have Ubuntu on a USB key, and whatever I have, I get the message "the system has no USB boot option." So far, I have:

  -Disabled the quick start.

  -Disabled Secure Boot UEFI firmware settings.

  -Tried to set the USB FDD and USB HDD at the top of the order of priority of Boot and Windows Boot Manager to the lowest priority.

  These measures appear to allow most people to access Ubuntu on their flash drive, but it does not work for me. Anyone know what I can try? Is there anyone here who has the same model and who has installed Ubuntu?

  If USB is not, probably you did not create a proper EFI bootable USB.

  Rufus allows you to create a bootable USB flash drive, selecting only for UEFI system.

  http://Rufus.AKEO.IE/?locale=en_US

  Please re-enable secure too boot.

• UCS C220 M3 - cannot install Ubuntu 14.04 OS

  Hi all

  I'm new to Cisco servers and we bought 3 servers UCS C220 M3.

  For one of them, I would like to had installed an operating system Ubuntu (14.04). I tried hard but unsuccessfully to install the operating system on the server.

  On this server, I have only one physical hard drive, because I'm not really interested in getting the RAID on this server. Initially, I started on a USB with Ubuntu image and installation worked fine. Then, I tried to boot from the hard drive, but it was impossible to find the hard drive in the boot menu.

  You have no idea about it? I suspect that this is because the RAID of LSI sotfware controller is enabled and one thing to note is that I have not installed FlexFlash Cisco's SD card. Is - this mandatory? When I try to configure RAID 0, so I'm not able to install ubuntu (impossible to detect the drive with the Ubuntu Installer).

  Thanks for any help!

  Alex

  If you set the UCS SW storage battery in AHCI mode, Setup see your local hard drive then?

  What is the hard disk that you installed? Depending on whether you install a 32-bit or 64-bit OS and size of the disk you are installing, it may require that the UEFI boot options.

  Please see https://help.ubuntu.com/community/UEFI for Ubunto UEFI install help.

  If you have an installation ISO that you used to create the bootable installation USB, you might want to consider editing than the ISO via the virtual KVM, on the tab of the VM and begin your installer in this way.  This will require that a compatible version of Java to be active in your browser.

  If you do not have a longer boot disk 2 TB, you might want to consider to keep everything in legacy bios mode and avoid the complexity of UEFI which can sometimes appear.

  For drivers, these will actually be the C600 Intel or Intel AHCI drivers (depending on the mode you're looking for).

  See the Readme in ucs-cxxx-drivers.2.0.8b.iso\Linux\Storage\Intel\AHCI\Ubuntu\14.04\ AHCI driver said that the ahci driver is already provided with the operating system...

  I must stress that for Ubuntu, I see not all versions or versions of firmware that have been officially supported for the SR on board or AHCI controller.  Please visit http://www.cisco.com/web/techdoc/ucs/interoperability/matrix/matrix.html

  Although you are able to run in AHCI mode, it is not officially test/pick-up.

  In my view, the controller AHCI/PCH 6 port included with theM4 C240 is supported in Ubunto 14.04.

  Thank you

  Kirk

• Cannot install Ubuntu 12.04.3 server in Vmware Workstation 10

  Hi all

  Does not work when I try to install Ubuntu on It. It starts normally asking for a language,
  then when I click on "Install Ubuntu server" my screen goes black and nothing happens.
  It will never select it your localized language and to install.

  Same problem occurs with 386 or amd64 version

  Any help will be appreciated!

  Thank you

  Found the problem.

  His seeems tied to the BIOS of my host. I did an update of it. And then I was able to perform the installation
  without any other problems!

  Nothing else has been changed! Just update the Bios!

  Now I have Ubuntu running in a virtual machine.

  Thank you all.

• Cannot install Ubuntu Server 64-bit

  Hey, I have a doubt, I think that my processor supports 64-bit operating system, then why I install Ubuntu Server 64-bit on VMWare?

  My processor is Intel Pentium Dual-Core T3200 2.00 GHz

  Some conditions must be met before a 64-bit guest OS could be virtualized:

  1. the transformer must be able to handle VT

  2. in the bios, this option should be enabled

  3. the host operating system should be a 64 bit OS in order to get good performance of the guest

  Theoretically, it might be possible to run OS 64 - bit almost under a 32-bit host OS, but performance will be poor due to the emulation instead of virtualization. If this is not an option.

• Cannot install Ubuntu on HP DV4 1500 Pavilion Entertainment PC

  I have a laptop with Windows 7 preinstalled by HP.

  now, I want to use it as a Linux Machine.

  When I try to install or start any linux/UNIX cd/usb, the system does not detect the...

  but when I boot it from win7 or win8 system detects and installs...

  How to get around the BIOS Lock Windows 7 (Windows)

  and install Linux OS flavor...

  Guide me as soon as POSSIBLE...

  It wasn't a problem with the BIOS settings...
  The question is how HP handles the boot device for locked bios of laptop computers.

  You cannot boot any os other than OS locked.

  Deviation is boot Ubuntu via USB HDD and install...
  subsequently install updated BIOS (from Ubuntu using Insyde Orginal Patch) to definitively solve the problem...

• HP s 4330: cannot install Windows, freezes before restarting. [solved: chipset defective stepping]

  Hello!

  I am banging my head on the wall with this case, can not understand, how to proceed.

  My experience: I worked a few years as a computer store technician, especially on desktop computers, so at least vaguely, I know what I'm doing, and I'm very careful when handling material.

  Background of the computer: I got a used HP 4330 s after the deceased family member. No fringe, pretty clean, no damage or traces of fall release. He had dead hard disk (click), broken DVD (engine brackets bent, I am told it is a child work) and was very dusty (blocked fan). I removed the optical drive, carefully removed all the dust, replaced heat is dedicated to the Sub CPU and put inside SSD, I took my other machine (erased). In the BIOS, I went from starting EFI.

  I jumped into the USB with Windows 8.1 fresh install, which ran well, until he wanted to restart. Screen went blue/violet (same color as the background of the normal installation), and it stopped, no disk activity, nothing. I turned to bike it, Windows installation proceeds, but failed. This is repeated several times.

  Steps I took to solve the problem:

  -Legacy mode and I tried to install again, same result.

  -Memtest Ran, past, memory switched to a few specimens (DDR3 and DDR3L), tried both slots, pass all, Windows will not complete the installation.

  -Traded stock to i5 - 2520M i3 CPU I had to hang out, which has been removed from the machine work (during upgrade), same result.

  -Done everything once again, this time without the battery and using big HP 120W 85x0w charger, same result

  -Exchanged on a different disk, same result.

  -Try exchanging AC7260 network card, only to discover he is blacklisted (* beep *?), removed wifi do map altogether, no change

  -Traded thumbdrive to another, and I tried two different Windows 8.1 relies

  -Turn off all devices in the BIOS, except USB.

  -Tried to install Ubuntu, only to find out that it works perfectly, but it will not boot from EFI, had efibootmgr shows the correct entries, laptop says that it cannot find the operating system.

  -Hiren Boot CD with BartPE is Windows XP starts and works very well.

  -Check time CPU, at a time using reporting and pirometer software, it does not exceed 65 degrees Celscius in any moment, which is well below the critical temperature on both processors.

  BIOS is F47. To my surprise, it is newer than what I can find in the download page (F07?).

  Can what steps I take to close on the issue? I would leave it under Ubuntu, but I need Windows on this computer, and I'm afraid he's going to go belly up.

  Last updated.

  First of all, doughjohn - problem is not in the initiation of the stop, but it will not accomplish the closure. There is almost everything disabled except BNT kernel and the video driver.

  The problem has been very difficult to diagnose, until I found a friend who also had the same machine.

  And here's the final solution:

  Like unbelieveble as it is, all three motherboards have manufacturing defects.

  Problem is the chipset: all of them, as, as I suspected, have Cougar Point B2 chipset with SATA bug. This degrades the connection of the HARD disk. There were two clues: USB3.0 adapter SATA with Windows 8.1/10 work and fine closures. Same disk moved in the hard drive bay or optical Bay can not close correctly and works over slow (!). Second, was my friend who had same 4330 s specifications, but without problems. I disassembled the machine and to my surprise he chipset B3, with visible signs of flow around it, and fix the markings certified HP. This laptop was RMA would once. I moved my installation to his mother, and he also starts very well on SATA ports.

  This is the first (and only) for laptop with Sandy Bridge-era components that suffer from a degradation of link chipset primary HARD disk SATA lines I've seen so far.

  To sum up: HP, your fault this time.

  I sold the laptop and I'm looking for a new machine, it will probably take HP 6470 B, if I can find all the components.

  Thank you for all those that the air here and offered advice and guidance. I really appreciate your help!

• Missing operating systems after trying to install Ubuntu

  I have a dv6 7010 WE

  I used to have Windows 7 x 64. I tried to install a dual boot Ubuntu, but if it worked I would not write this.

  I tried to install Ubuntu with a live CD. I've been running Ubuntu, I thought it was over install and I restarted the computer. When he came back he said "Missing Operating System". The live CD was not in when he did this, and then I put it back on and restarted and he returned to Ubuntu and offered to install again. I didn't install it and I restarted just once again (error). Yet once he came with "Missing Operating System". I restarted again, but press the ESC key and went to the start menu. I've sailed around, trying to make a boot recovery and try to do a system restore, but none of them worked.

  Now when I put the Ubuntu CD in I don't you Ubuntu, but the same screen lack of operating system

  I tried to get a download of Windows 7 and reinstall it on another drive, but I didn't do well do things and don't want to take the risk even once.

  I cannot enter in a command window and can do stuff with it, but I have no idea what to do at this point.

  I'm stuck and I really really need help. I really really want to buy a new computer. My computer did not come with a Windows 7 installation disc.

  Help please.

  Please do not answer. I just ordered recovery through Staples discs.

  To anyone else reading this, I suggest you just buy the recovery disc for your computer.

  The recovery discs also got rid of all the stuff of Ubuntu

• New G770 does not start after installing Ubuntu

  Do not use is not Windows, I just installed Ubuntu on this new G770 wipe all the previous partition in the process.

  Now when you are powering the laptop, the power led lights up, but isn't it, no display, mechanical noises from him, nothing. Cannot access the bios.

  What is the cause and how to fix it?

  Kind regards

  I had a battery problem. Which is fixed now.

  Installation is complete on the Lenovo G770 with InsydeH2O Bios. He managed.
  Here are the steps I followed:
  The disk partition table is TPG. I created a partition fat32 in first position and set the boot flag (partition type is EFI, checked with gdisk ef00 type). Then an ext4 /, year ext4/Home and a sectoral approach.
  The installer told me that with this partition in use table format, I should normally have a separate partition for the boot loader code, also not yet would it be possible to install the boot loader for a partition. I ignored that did not create an and we went to the installation process.
  He filled out. I then installed grub-efi-amd64 and everything works perfectly on this laptop, the system now works fine.

• Impossible to install ubuntu with windows 8 double trunk

  I have lenovo laptop g500s with windows 8 pre installed. I couldn't install ubuntu (linux) alongside win 8. When I tried to dual boot, this laptop with ubuntu victory 8 boot manager was corrupted.can someone suggest me how to install ubuntu with windows 8.

  Hello Samyajith,

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the exact error message or code when you say, 'victory 8 boot manager has been corrupted?

  I appreciate your efforts to resolve the issue.

  Please refer to the suggestions for aufa35 replied on 6 January 2014 and check the issue.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-windows_install/dual-boot-Windows-8-and-Ubuntu/cce29abd-4190-4e9d-87E3-33b7fb640569

  Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  If this does not help, then I would recommend you post the question on the Ubuntu forums.

  Ubuntu community forums
  http://community.Ubuntu.com/contribute/support/Ubuntu-forums/

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Cannot install iOS 10.0.1 with Apple Configurator 1.7.2

  Hello

  I have 60 iPads in 5 carts (12 per basket) that I need to install some applications on. They are already configured and supervised with Apple Configurator 1.7.2. I've never had problems in the past with AC1, I've always been able to install the updates and applications easily with very few questions, because of that I've never felt the need to update to AC2. However, this time during the update of ios and refreshment, I get the error 'complete with an error - cannot install iOS' 10.0.1 And now 12 of my iPads are stuck in recovery mode.

  I tried before wipe them off and re supervise them, but I always get the cannot install iOS 10.0.1 error, followed by all the iPads stuck in restore mode. I tried to update only 1 or 2 at a time. I tried the update/supervise them with no apps queued for installation. I tried to restore the iPad via iTunes, which works, but when I try to put it back on AC1, I still get the same error mode and recovery.

  I tried searching online for compatibility with the new iOS and AC 1 problems but found nothing.

  I would like to know if there is more information I should provide that might help.

  Thank you for your time.

  Ben

  Hi Ben

  Makes your iPad successfully update to IOS 10, we have approximately 400 ipads, I've updated a single ipad at 10 IOS using our MacBook pro AC1 OSX El Capitan to test, ill try another now and see if its success.

  When you connect an ipad update the Configurator re-download the IOS 10 or use a cached copy?

  How your Configurator is connected to the internet (behind Proxy, Wifi, Ethernet), perhaps the downloaded IPSW file is corrupted and need to be redownloaded removed\.

  Kind regards

  Rick

• Cannot install 9.3.5 iPad after two downloads

  Cannot install 9.3.5 for ipad

  HI I just wanted to know if it was on an ipad or a. Mac if it's an iPad plug support on a computer or go on http/www.apple.com

  Thank you

• Cannot install OS: "this identifier Apple has not yet been used.

  I just got my first Mac yesterday, a mid 2010 Macbook of opportunity. It's in great shape, works great, I was briefly very satisfied with my purchase. Then I tried to reformat/reinstall, as it does whenever purchasing a computer used.

  I followed the instructions here: https://support.apple.com/en-us/HT204904 and when I got to the step three, after the failure of the hard drive, it wouldn't let me install the operating system. He wanted to connect first with my Apple ID, so I did an Apple ID, but now it keeps giving me an error "this identifier Apple has not yet been used in the App store" and then it gives me the opportunity to cancel or "review". Click Cancel simply cancels the installation, just by clicking on review also cancels the installation.

  An ID is not necessary, but there is no way I can see to avoid it say the instructions on this page. It was suggested that maybe I could avoid the connection on the way to recovery, rather than recovery of the Internet, but the Cmd + R and Cmd + Option + R give recovery of the Internet. I don't see any way to get to the regular recovery.

  I had a suggestion to install from the disc, but I have not all discs. If I could download it from somewhere and burn them then that would be nice, but the instructions on this page are pretty clearly that it should not be necessary to use disks. I should be able to do without signing in.

  So... what upward with who? Where should I go from here? Is it possible to do a regular recovery? Or bypass the Apple ID thing?

  < published by host >

  "a mid 2010 Macbook opportunity."

  "Cannot install OS:" this identifier Apple has not yet been used.

  It's the property > change owner of a Mac of opportunity