Cannot install updates KB2596615, KB2596672, KB2596856, KB2597162, KB2687314

Cannot install updates KB2596615, KB2596672, KB2596856, KB2597162, KB2687314

Cannot install updates KB2596615, KB2596672, KB2596856, KB2597162, KB2687314

You receive errors related to updates?

  1. Open Windows Update by clicking the Start button, all programs and then click Windows Update.
  2. In the left pane, click view update history.
    http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed
  3. Find an update for Windows that has failed to install, and then double-click the update to view more information.
    Updates that have failed to install will display failed under status, next to the name of update.
  4. In the Windows Update dialog box, next to the details of the error, review the error code for the update has failed.
  5. Follow the links in the Windows Update dialog box under more information or help and Support to resolve the problem, then try to reinstall updates by using Windows Update in Control Panel or by mail with the error code and maybe someone may be able to help others.

What are the error codes and how can I use them?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-error-codes-and-how-can-I-use-them

Windows update General troubleshooting

Suggestions:

How to reset the Windows Update settings?
http://support.Microsoft.com/kb/971058

Diagnose and automatically fix common problems with Windows Update
http://support.Microsoft.com/mats/windows_update/

Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
http://support.Microsoft.com/kb/2509997

Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
http://support.Microsoft.com/kb/910339/

Clean boot and run Windows Update: http://support.microsoft.com/kb/929135

Tags: Windows

Similar Questions

  • "Cannot install update and the error occurred ' iOS 9.3.2

    Try to upgrade to 9.3.2 but get "cannot install update and the error has occurred" if I am on WIFI or via iTunes. Someone else?

    Go to settings > general > storage & use iCloud > manage storage (the first) > and if there is an update, delete it. Then go to settings > general > Software Update and try again.

  • Error code: 8024200d (cannot install updates)

    Error code: 8024200d (cannot install updates)

    Error 0x8024200D code is:
    SUS_E_UH_NEEDANOTHERDOWNLOAD
    The Setup program requires more data to download

    Option 1 - Download updates manually and install the same (you can find the same via number KB) -http://www.microsoft.com/downloads/en/default.aspx

    or you can simply try.

    Option 2 - How to reset the Windows Update settings?
    http://support.Microsoft.com/kb/971058

    FYI - read - http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/1467f44b-ee27-4f7d-98d7-f1c4b35b3395

    Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

  • Error codes: 646 & 643 (cannot install updates)

    646 & 643 error codes. Cannot install updates.  Need to fix this!

    Are you referring to: http://support.microsoft.com/kb/2258121

    See also: http://support.microsoft.com/kb/958052

    TaurArian [MVP] 2005-2011 - Update Services

  • Cannot install update kb971486 keep getting error code 80072EE2

    Cannot install update kb971486 keep getting error code 80072EE2

    Visit this link:
    http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80072EE2

    Otherwise, try to reset Windows Update components:
    http://support.Microsoft.com/kb/971058

  • Cannot install updates Windows XP error Code 0 X 80070670

    original title: CANNOT INSTALL UPDATES WINDOWS XP ERROR CODE 0 X 80070670

    CONTINUE WITH WHAT?

    Search for malware:

    Download, install, execute, update and perform analyses complete system with the two following applications:

    Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

    Search online with eSet Online Scanner.

    The less you have to run all the time, most things you want to run will perform:

    Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

    You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

    Do a house cleaning and the dust of this hard drive:

    You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

    Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

    If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
    http://www3.TELUS.NET/dandemar/spack.htm
    (Especially of interest here - #4)
    (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

    You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

    How to use disk cleanup
    http://support.Microsoft.com/kb/310312

    You can disable hibernation if it is enabled and you do not...

    When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

    -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
    -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
    -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

    You can control the amount of space your system restore can use...

    1. Click Start, right click my computer and then click Properties.
    2. click on the System Restore tab.
    3. highlight one of your readers (or C: If you only) and click on the button "settings".
    4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
    5. click on OK. Then click OK again.

    You can control the amount of space used may or may not temporary Internet files...

    Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

    -Open a copy of Microsoft Internet Explorer.
    -Select TOOLS - Internet Options.
    -On the general tab in the section 'Temporary Internet files', follow these steps:
    -Click on 'Delete the Cookies' (click OK)
    -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
    -Click OK.
    -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
    -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

    You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

    CCleaner (free!)
    http://www.CCleaner.com/
    (just disk cleanup - do not play with the part of the registry for the moment)

    Other ways to free up space...

    SequoiaView
    http://www.win.Tue.nl/SequoiaView/

    JDiskReport
    http://www.jgoodies.com/freeware/JDiskReport/index.html

    Those who can help you discover visually where all space is used.  Then, you can determine what to do.

    After that - you want to check any physical errors and fix everything for efficient access"

    CHKDSK
    How to scan your disks for errors* will take time and a reboot.

    Defragment
    How to defragment your hard drives* will take time

    Cleaning the components of update on your Windows XP computer

    While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

    Download and run the MSRT tool manually:
    http://www.Microsoft.com/security/malwareremove/default.mspx
    (Ignore the details and download the tool to download and save to your desktop, run it.)

    Reset.

    Download/install the latest program Windows installation (for your operating system):
    (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
    (Download and save it to your desktop, run it.)

    Reset.

    and...

    Download the latest version of Windows Update (x 86) agent here:
    http://go.Microsoft.com/fwlink/?LinkId=91237
    ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

    Close all Internet Explorer Windows and other applications.

    AutoScan--> RUN and type:
    %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
    --> Click OK.

    (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

    Reset.

    Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
    How to reset the Windows Update components?

    Reset.

    Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

    Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

    If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

  • Cannot install updates of security for xp #KB2698023 and #2656370

    Cannot install updates for XP #KB2698023 and #KB2656370

    Hi PeteBosch,

    Welcome to the Microsoft community. According to the description of the problem, you are not able to install updates (KB2698023, KB2656370). Provide the following information:

    ·         Did you do changes on the computer before the show?

    ·         You are able to install other updates successfully?

    ·         You get the error message?

    ·         You use a third-party security software?

    I suggest you follow these methods.

    Method 1: Temporarily disable the security software.

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

    http://www.Microsoft.com/downloads/en/default.aspx

    Method 3: Follow the steps in the article.

    How to reset the Windows Update components?

    You can read this article for more information:

    You cannot install some programs or updates

    Note: You must take the backup of the data before performing any installation of windows.

    I hope this helps. Let us know if you need more assistance.

  • Cannot install updates. Error code constant of 0x8007001f.

    IE8, SP3 and windows reinstalled update. Still can not install new updates.

    Hello

    (1) update that you are trying to install?

    (2) what is you get the exact error message?

    (3) remember when you make changes to the computer before the show?

    I would suggest trying the following methods and check if it helps.

    Method 1: Run Microsoft Fixit
    The problem with Microsoft Windows Update is not working: http://support.microsoft.com/mats/windows_update/

    Method 2:
    You can also try the steps in the link and check if it helps.
    You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or
    http://support.Microsoft.com/kb/943144

    Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    How to back up and restore the registry in Windows:
    http://support.Microsoft.com/kb/322756/

    Method 3:
    If the problem is not resolved, I suggest you try the procedure described in the link mentioned below.

    You cannot install some programs or updates: http://support.Microsoft.com/kb/822798

    Note: It is very important that you back up all your personal data before going ahead with the upgrade on the spot.

    Follow the article below to learn more:
    Temporary connection related errors may occur when you use Windows Update or Microsoft Update
    http://support.Microsoft.com/kb/836941#advmethodC

    Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  • cannot install update security for Windows XP (KB2686509)

    cannot install update security for Windows XP (KB2686509)

    Hello, gsfl Jg,

    Open Windows Update and check if KB2686509 and KB2676562 are or are not installed.

    When you tried to install the update, you would have received an error code.  Please return this zip code which lies in Windows Update.

    Why this update is offered again several times?

    Windows updates are revived until the update is installed on your computer. If this update is already, perhaps an installation failure has occurred. Check log files to install KB for the error codes. For example, the log file of installation KB for this security update would probably "C:\Windows\ KB2686509.log"
    For more information about how to resolve these problems, click on the number below to view the article in the Microsoft Knowledge Base:

    958051 (http://support.microsoft.com/kb/958051/) you receive a "0x8007F0F4" error code when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site

    What should I do if the installation of this update fails with the error "0x8007F0F4"?

    If you receive the "0x8007F0F4" error when you try to install this security update, follow these steps:

    1. Open the Faultykeyboard.log file that is located in the folder %windir%. This log file contains information about the registered keyboard layout files that are not in the folder % Windir%\System32. The log file will resemble the following:

      Keyboard1.dll.\Layoutfiles\keyboard2.dll C:\Windows\System\Kbda1.dll

      Note In this example, the first entry is just a file name. The second entry includes a relative path with the name of the file. The third category includes a full path of the file.

    2. Copy the files that are listed in the Faultykeyboard.log log file in the System32 folder.

    Note Contact Microsoft technical support if you can't find the Faultykeyboard.log file.

    http://support.Microsoft.com/kb/2686509

  • Cannot install update (KB2446708) error Code: 0 x 643

    Cannot install update (KB2446708) error Code: 0 x 643

    Hi robandersonyuan,

    You have an Antivirus installed on your system?
    If you have Antivirus proceed to turn off and then try to install the 2446708 KB, also check the section below:

    When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
    http://support.Microsoft.com/kb/923100

  • Cannot install updates update - error code 0 x 800700

    original title: cannot install updates

    When I triet to update, I can't 13 updates code kb2526954 0 x 80070; kb2464583 0 x 80070641; kb2464623. ; kb2466156; KB2446708; kb2446704; kb2494047; kb9778464 and option declare check if your Windows xp in safe mode.

    Copy and paste it to the box run from the start menu:

    %systemroot%\system32\CMD.exe

    If you want to help in Spanish request here: http://answers.microsoft.com/es-es

    John

  • Cannot install updates or Flash Player on Windows Vista

    I know this is an old machine, but I really need help.

    I recently had to restore laptop cleaning to factory settings and have had problems with windows update since.

    Running Vista Home 32-bit.

    Installing sp2, but now he finds other 120ish updated but will not progress the 0% download status

    Also cannot install latest Flash Player. Going to download but not install.

    Some research suggests that this was a certificate problem and run up-to-date KB2763674

    Have downloaded it but when I try to run it I am stuck as I threw in a "search for update" constantly.

    Pointers appreciated.

    Hello

    You can read the following article.

    Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

    http://support.Microsoft.com/kb/2509997

    Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.

    How to back up and restore the registry in Windows:

    http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-Vista

    Important: all by performing the check disk on the hard disk, if bad sectors are detected and if it tries to repair this area, all available data on the risk of being lost.

    Please let us know if the problem persists. We will be happy to help you further.

  • Cannot install update Cumulative security for Internet Explorer 9 under Windows Vista (KB2792100)

    Original title: update KB2792100

    My computer has been tyrying updated Cumulative Seci = security update for Internet Explorer 9 for windows vista for over a month now and it says it fails every time.  Any ideas?

    Hi Jeanlavanway,

    Thanks for posting your question in the Microsoft Community.

    From descriptions of the question, it seems you cannot install update Cumulative security for Internet Explorer 9 under Windows Vista (KB2792100).

    I imagine the inconvenience that you are experiencing. I'll help you fix the problem.

     

    To help you solve the problem, I would appreciate if you could answer the following question:

    1. you receive an error code or message?

    2 is the issue specific to some or all of the updates?

    3. have you made any recent hardware or exchange of software on your computer before the show?

    Please follow the methods and mark the question below:

    Method 1:

    Follow the steps in the link below.

     

    Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2:

    http://support.Microsoft.com/kb/2509997

    Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

     

    http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry.

     

    Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

    Method 2:

    I suggest you to install updates and check manually.

    MS13-009: for Internet Explorer Cumulative security update: February 12, 2013:

    http://support.Microsoft.com/kb/2792100

     

    A security update cumulative for Internet Explorer 9 on Windows Vista (KB2792100):

    http://www.Microsoft.com/en-in/Download/details.aspx?ID=36601

     

     

    I hope that the information above helps you.

    Your response is very important for us to ensure a proper resolution.

    In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

     

     

  • Cannot install updates error 80050570.

    Updates to try MS but get error thir. Computer then sometimes all goes off.

    Ideas?
    OT:Update error 80050570?

    Hi JRRPZannie,

    Thanks for posting in the Microsoft community! You have reached the right forum for your question.

    1. What is the accurate and complete error message you get?
    2. don't you make changes to the computer before the show?

    Method 1
    I suggest you to run the fixit from the following link:

    The problem with Microsoft Windows Update is not working
    http://support.Microsoft.com/mats/windows_update/

    Method 2
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135

    Note: Follow step 3 of section of boot KB929135 to reset the computer in normal mode.

    Method 3
    I suggest you try the steps from the following link:

    Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
    http://support.Microsoft.com/kb/2509997

    Note:
    this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows Vista
    Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-files

    Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

  • continue to be "WindowsUpdate_80070490" "WindowsUpdate_dt000" cannot install updates

    ongoing for months.  have installed sp1 and sp2.
    use the AVG antivirus

    Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
    http://support.Microsoft.com/kb/2509997

    or

    You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
    http://support.Microsoft.com/kb/958044

    Notes

    NB: If you have installed SP1 or SP2 for Vista

    method for Windows Vista, the * UPGRADE option is not available because Service Pack/s are installed and that your operating system is newer than the system you are trying to reinstall, so service pack/s must be removed in this case.

    Uninstall the Service Pack/s: How to uninstall Windows Vista service packs as a troubleshooting step
    http://support.Microsoft.com/kb/948537

    See also:

    How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
    http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

Maybe you are looking for