Cannot install updates on Server 2008 R2. Reporting EventViewer 2147500034 error

Similar Questions

• Cannot install printer on Server 2008 because Onenote is not installed?

  I am trying to install a printer on a Server 2008 computer.  But when the installation checks for the printer, it stops and says, Onenote must be opened first.  I'm not planning to install any version of Office on this server.  Why am I blocked?    If I use the add a printer utility box, he wants to add a PostScript driver, and of course, I don't want to, I want the PCL driver and it doesn't give me that option either.

  Why should the world Microsoft be so difficult?

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Cannot install updates of netframe 3.5. What is error code 0 x 80070673 average?

  I tried for a week to install the latest updates from ben and all I get is failure.
  and the error code 0 x 80070673
  Ant suggestions?  What does the error code?

  Hello

  try to see here, perhaps could help you:

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/thread/a3cf9c6c-5BE3-4D36-91BB-ed12dc1aa720/

  LC

• Cannot install updates windows 0 x 80070652 on Windows XP error

  How can I fix it?

  Hello

  1. have you you can all changes on the computer before this problem?
  2. the updates fail to install? You can check this in the history of the update?

  Step 1: To check the update history, follow these steps:

  1. Click Start, click all programs, and then click Windows Update or Microsoft Update.
  2. on the Windows Update Web site or the Microsoft Update Web site, click on view update history.

  Step 2: Try to reset the Windows Update components and check.
  Reference:
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

• Cannot install updates for Windows Vista. Get the following error: A 80071, 30. Help!

  I tried to install the updates and I get notice of failure with code A 80071, 30.  Help! I tried installation manual, automatic restart of the diagnosis.

  Thank you!

  Vista SP1 or SP2 installed?

  How to ask a question
  http://support.Microsoft.com/kb/555375 >

  It helps those answering questions if you provide:

  What is your full version of windows (32-bit or 64-bit) and service pack level. (Right-click on my computer and select properties: Windows version which is displayed on the general tab that results (for example, Windows XP Professional Service Pack 1;)) Windows Vista Edition SP2 family)?

  you use what browser (exact version).

  what application anti-virus or security suite is installed and your current subscription?

  A 3rd party firewall is used instead the native Windows Firewall?

  What other software products anti-malware are installed and running?

  What updates you trying to install? (Number of KB)

  Please do it in your next reply.

  Information you provide will help someone to provide you with a relevant solution.

  Go to the next article via Internet Explorer (only) & run the fix it in DEFAULT mode and AGGRESSIVE 50202 .

  Try to reset the Windows Update components and see if it helps. See the article below mentioned the same thing.

  How to reset the Windows Update components?

  UTC/GMT is 20:52 on Saturday, December 17, 2011

• Cannot install updates or Flash Player on Windows Vista

  I know this is an old machine, but I really need help.

  I recently had to restore laptop cleaning to factory settings and have had problems with windows update since.

  Running Vista Home 32-bit.

  Installing sp2, but now he finds other 120ish updated but will not progress the 0% download status

  Also cannot install latest Flash Player. Going to download but not install.

  Some research suggests that this was a certificate problem and run up-to-date KB2763674

  Have downloaded it but when I try to run it I am stuck as I threw in a "search for update" constantly.

  Pointers appreciated.

  Hello

  You can read the following article.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.

  How to back up and restore the registry in Windows:

  http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-Vista

  Important: all by performing the check disk on the hard disk, if bad sectors are detected and if it tries to repair this area, all available data on the risk of being lost.

  Please let us know if the problem persists. We will be happy to help you further.

• Cannot install update Cumulative security for Internet Explorer 9 under Windows Vista (KB2792100)

  Original title: update KB2792100

  My computer has been tyrying updated Cumulative Seci = security update for Internet Explorer 9 for windows vista for over a month now and it says it fails every time.  Any ideas?

  Hi Jeanlavanway,

  Thanks for posting your question in the Microsoft Community.

  From descriptions of the question, it seems you cannot install update Cumulative security for Internet Explorer 9 under Windows Vista (KB2792100).

  I imagine the inconvenience that you are experiencing. I'll help you fix the problem.

   

  To help you solve the problem, I would appreciate if you could answer the following question:

  1. you receive an error code or message?

  2 is the issue specific to some or all of the updates?

  3. have you made any recent hardware or exchange of software on your computer before the show?

  Please follow the methods and mark the question below:

  Method 1:

  Follow the steps in the link below.

   

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2:

  http://support.Microsoft.com/kb/2509997

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

  http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry.

   

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Method 2:

  I suggest you to install updates and check manually.

  MS13-009: for Internet Explorer Cumulative security update: February 12, 2013:

  http://support.Microsoft.com/kb/2792100

   

  A security update cumulative for Internet Explorer 9 on Windows Vista (KB2792100):

  http://www.Microsoft.com/en-in/Download/details.aspx?ID=36601

   

   

  I hope that the information above helps you.

  Your response is very important for us to ensure a proper resolution.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

   

   

• Cannot install updates error 80050570.

  Updates to try MS but get error thir. Computer then sometimes all goes off.

  Ideas?
  OT:Update error 80050570?

  Hi JRRPZannie,

  Thanks for posting in the Microsoft community! You have reached the right forum for your question.

  1. What is the accurate and complete error message you get?
  2. don't you make changes to the computer before the show?

  Method 1
  I suggest you to run the fixit from the following link:

  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

  Method 2
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: Follow step 3 of section of boot KB929135 to reset the computer in normal mode.

  Method 3
  I suggest you try the steps from the following link:

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows Vista
  Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-files

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• Cannot install updates KB2596615, KB2596672, KB2596856, KB2597162, KB2687314

  Cannot install updates KB2596615, KB2596672, KB2596856, KB2597162, KB2687314

  Cannot install updates KB2596615, KB2596672, KB2596856, KB2597162, KB2687314

  You receive errors related to updates?

  1. Open Windows Update by clicking the Start button, all programs and then click Windows Update.
  2. In the left pane, click view update history.
     http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed
  3. Find an update for Windows that has failed to install, and then double-click the update to view more information.
     Updates that have failed to install will display failed under status, next to the name of update.
  4. In the Windows Update dialog box, next to the details of the error, review the error code for the update has failed.
  5. Follow the links in the Windows Update dialog box under more information or help and Support to resolve the problem, then try to reinstall updates by using Windows Update in Control Panel or by mail with the error code and maybe someone may be able to help others.

  What are the error codes and how can I use them?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-error-codes-and-how-can-I-use-them

  Windows update General troubleshooting

  Suggestions:

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  Diagnose and automatically fix common problems with Windows Update
  http://support.Microsoft.com/mats/windows_update/

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
  http://support.Microsoft.com/kb/910339/

  Clean boot and run Windows Update: http://support.microsoft.com/kb/929135

• continue to be "WindowsUpdate_80070490" "WindowsUpdate_dt000" cannot install updates

  ongoing for months.  have installed sp1 and sp2.
  use the AVG antivirus

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997

  or

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  Notes

  NB: If you have installed SP1 or SP2 for Vista

  method for Windows Vista, the * UPGRADE option is not available because Service Pack/s are installed and that your operating system is newer than the system you are trying to reinstall, so service pack/s must be removed in this case.

  Uninstall the Service Pack/s: How to uninstall Windows Vista service packs as a troubleshooting step
  http://support.Microsoft.com/kb/948537

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

• Cannot install updates error 8022400D

  With the help of vista windows update can't install the update even operating system and the same error as 8022400 D continues to appear.  There is no solution that I could find for this error.  I ran "fix - it", who said the components that have been broken have been set.  I was still unable to install the update and received the same error message.

  Hi MarkSMD,

  (1) update that you are trying to install?
  (2) what is the complete\exact error message?
  (3) were there any changes to the computer before the question?
   
  Check the following link for updates are installed.
  See the Windows updates are installed
  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed
   
  See the steps in the following link.
  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
   
  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
   
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
   
  I hope this helps.

• 8007370c error code cannot install updates

  Have a Dell Inspiron I1720, TS250 @ 1.50 GHz, 2 GB - Ram, running Vista Home Premium.  I tried several times to install 13 updates (recent) starting with MS Net Framwork 3.0 SP2 - Vista, next KB2676562, etc.  Downloaded 13 but do not... settle retried several times, used the MS Fixit Center 3 or 4 times to correct errors of update. Get the following error from long:

  c:\ProgramFiles\MicrosoftFixitCenter\SAPF\System\60BB3EEE-C5FB-4233-B5FE-F8E36C1F78D9.9

  error code 0 x 80040154

  Background: high

  Other updates like MS security Essentials definitions get downloaded & installed without problem... I worked on this for 4 days... someone can help me resolve this quickly... my holiday is coming!

  E-mail address is removed from the privacy *.

  Hello

  Please follow the steps mentioned below and get back to us with the results.

  Method 1: Run (CheckSur.exe) system update readiness tool

  Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information about how to download and run the CheckSur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/947821

  (947821) description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Try to install updates again.

  For more information, see the link below.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  If method 1 did not fix the problem, proceed to method 2.

  Method 2: Run the clean boot and try to install the updates.

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Please note: After troubleshooting, be sure to start your computer in normal mode by following step 7.

  If method 2 has not fixed the problem, proceed to method 3.

  Method 3: Scan of the file system (CFS) auditor.

  Perform a scan of the checker (SFC) system files on your computer. SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  See the following article for more information on using SFC tool to troubleshoot missing or corrupted system files:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  If method 3 has not fixed the problem, go to method 4.

  Method 4: Turn off the Antivirus and firewall.
  
  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/firewall-frequently-asked-questions

  Try to reinstall the update.

  Note: make sure that you enable the antivirus software, other security and firewall after the test programs.

  Warning:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope that helps!

• Windows installation error is not downloaded correctly, cannot install updates.

  Original title: my window updates do not update. I ran to fix and it is said that the windows installer was not downloaded correctly? Any suggeestions?

  My window updates do not update. I ran to fix and it is said that the windows installer was not downloaded correctly? Any suggeestions?

  Hello

  1. What is the exact error message you get?

  2. that Microsoft FIXIT did you use?

  3 did you last modified the software on the computer?

  Method 1:

  I suggest you to go through the steps mentioned in the link and the Coachman.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  I also suggest you go through the steps mentioned in the link and the Coachman.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

• Cannot install updates WIndows error 641

  original title: updates WILL NOT INSTALL RAN CORRECTION IT AND ALWAYS No. CHANCE of ERROR CODE641 not

  Received updates as usual, tried to install, not 2 x a tried to run again, has failed, ran the fix on the site has not yet. Ran the program to check the clear computer etc viriuses but updates will not be installed after fix it says download fixed

  Hi LinMiller,

  What fixit did you run?

  Try following the methods provided below and see if it helps:

  
  Method 1:

  It seems that there is a problem with the update of Windows. Click on the link below.

  How to resolve problems connecting to Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/818018

  
  Method 2:

  Follow the steps mentioned in the article below.

  Step 1:

  It may be that a third-party application is causing this issue. Put the system at boot. Follow the steps mentioned in the article given below to configure the system to boot and try to update.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you have finished installing, follow step 7 article to start on normal startup.

  Step 2

  Download updates manually from the Microsoft site and install on the system to boot and see if the problem is resolved.

  http://www.Microsoft.com/downloads/en/default.aspx

  
  Method 2
  I suggest you try the steps from the following link:

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:   back up the registry in Windows Vista

  Method 3
  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:   back up the registry in Windows Vista

  Also I suggest you to return the item mentioned below.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Cannot install update error/kb2653956 8e5e0147

  I cann not install update KB2653956 (all other updates are successful).  Several times, it fails with the error message 8e5e0147.  I have Vista and IE9.

  I tried the MicroFixit option and then downloaded the tool to update with no result. What should I do next?

  Hello

  
  1 have. what fixit you tried?
  2 did you do changes on the computer before the show?
  I suggest you to follow the steps below and check if it helps:
  
  Method 1: You try to perform the clean boot, and then try to install the update manually.
  
  Step 1: Perform a clean boot:
  
  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
  
  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  
  http://support.Microsoft.com/kb/929135
  
  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.
  
  Step 2: Install the update manually from the link below.
  
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=29395
  
  Method 2: If the problem is not resolved I suggest you try the procedure described in the link mentioned below.
  
  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2:
  
  http://support.Microsoft.com/kb/2509997
  
  Warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows
  And take note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
  Method 3: Try to reset components to update Windows from the following link, which would help you to install the updates of windows. http://support.Microsoft.com/kb/971058
  
  Warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows:
  Check if you are able to install the update to Windows.
  
  Hope this information is useful.