Cannot install updates on windows xp

Similar Questions

• Cannot install updates for windows xp * error 0 X 80070424

  I can't start my microsoft firewall nor my update, I checked to make

  sure my updates are fixed to the car and they are, please help.

  Thank you

  AND

  http://support.microsoft.com/kb/968002 -

  Levonorgestrol error 0 x 80070424 when you use Windows Update, Microsoft Update, or Windows Firewall

   

  Summary:

  When you try to perform one of the following, you may receive an error message that contains error code:

  0 x 80070424

  • Install updates using Windows Update
  • Install updates using Microsoft Updates
  • Install updates for Microsoft Security Essentials
  • Start the Windows Firewall

• Cannot install updates for Windows 7 SP1

  Hello

  I tried for awhile now to switch to Windows 10 without luck ( http://answers.microsoft.com/en-us/windows/forum/windows_10-win_upgrade/windows-7-key-not-recognized/9a66ab9a-819a-4285-9461-64e7528db222?tm=1450545430339&auth=1 ). In the end, I decided to reinstall Windows 7 RTM, install all updates and then upgrade to Windows 10.

  Unfortunately, I seem to be impossible to install updates for Windows 7 now. Everything was going fine until Windows Update Agent 7.6.7600.320 installed. After a few mistakes, WU start looking for updates for hours. I've tried everything as suggested here without a bit of luck. In the end, I decided to leave it to search through the night and finally it does find and download updates about 300.

  Installation of these updates takes about 4 hours and Windows restarted and tried to configure the new updates, restarted saying once again he could not configure the updates of Windows and it will undo the changes. And it's been like that for over an hour.

  So as soon as now I can not even update Windows 7, not to mention the upgrade of Windows 10.  Any ideas? I'm sick of the Windows updates, causing problems.

  Installation sometimes loads of updates at a time can cause problems. When you access the list of the 300 updates Windows updates to odd day again, deselect all of them and then choose the oldest (for example) 50 and see if they install on their own.

  Sometimes do fall off a long list of updates and try to install more small pieces may help them to install.

  Is not sure, but its worth a try as a first shot.

  (I know what you mean though issues of update.) It makes you wonder what's going on sometimes :-()

  If this does not help, is there required failure account error codes?

• Cannot install updates in Windows XP

  Original title: updates...

  Hello

  I can not install updates for... express .outlook 2003 Junk e-mail filter,

  Microsoft.net frame work 2.0 sp2 in windows in Office 2003, KB2760574, security

  I tried different things... but since I, m updated Automatic and never had any problems before...

  Let's say I am a bit lost... to old for all that has been suggested to...

  Does anyone have a quick fix for me :) I know it's never late to learn but at 73, I try to make things easier for me :)

  Update for Office 2003 (KB2760574) security

  Update for the junk e-mail Filter Outlook 2003 (KB2760754)

  Thank you very much

  Julie

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=36361

  A vulnerability of security in Office 2003 that could allow arbitrary code to run when opening a file modified for malicious purposes. This update resolves this vulnerability.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=36353

  Microsoft has released an update for the Outlook 2003 Junk e-mail filter. This update provides the latest fixes for the Outlook 2003 Junk e-mail filter. Additionally, this update contains stability and performance improvements.

  Download the complete and even install (if necessary with the support of Office 2003 installation in the drive).

  or

  Code error '0 x 80070646', '646', or '1606' when you try to install the Office updates
  http://support.Microsoft.com/kb/2258121

• Cannot install updates of Windows Error Code 0x8020000D

  original title: 0x8020000D error Code

  Windows XP update not install, error message Code 0x8020000D, looking for a solution or explanation.

  Hey arlo,.

  You are not able to install updates?

  You can follow this link & check if the problem persists:

  How to reset the Windows Update components?

  Hope the helps of information.

• Cannot install updates for Windows XP SP3

  Well for some reason, I am unable to update a new installation of Windows XP Pro after installing SP3.

  I tried the following:

  Reset.

  IE6 is in tools > set windows update (gave me the message of not being able to be updated unless the update to sp3 which I am already)
  The Windows Security Center on the left hand side click on "check the latest updates from Windows Update." Got the same page as described before.
  Microsoft Windows browsed forums - found a lot of comments saying problem has been resolved by updating to IE8.
  Updated to IE8. Restarted. Waited to see yellow shield in the corner saying windows has been downloaded updates. There can be no.
  Click "Check the latest updates" once again, he launched IE8 but led me to the same page, telling me to SP3 again, I already have)
  Checked under System Properties I'm at SP3.
  The active firewall settings. Make an exception for wupdmgr and wuaclt. Think the windows firewall can block updates.
  Waited for updates again. Yet none came through.
  Click "Check the latest updates", waited a bit came updates.
  Entered the update IE8\Tools\Windows and got the same message to update again.

  There is no other software virus on the PC at the moment.
  I was Imaging PCs for several weeks, and this is the first time I have encountered this problem.

  I have .net framework 2.0 and 3.0 is installed. They have been installed prior to service pack 3. I tried to uninstall, but it wouldn't let me, and I'm not entirely convinced that is the problem. Any ideas?

  This PC has been infected by a virus previously. However until I did the reinstall I had deleted the partition previous and had the drive reformatted when you set up...

  After a clean install, you will have the equivalent of a "new computer" in order to take care of everything below in order before connecting otherwise the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other disk to the computer:

  1. make sure that the Windows Firewall is enabled.

  2 uninstall all now invalid Norton, McAfee, etc., free version of test which have perhaps been reinstalled when you reinstalled Windows, run the appropriate removal tool, [1] before installing the antivirus of your choice application (for example, Microsoft Security Essentials - free).

  3 then only get to Windows Update & get the fully-patched computer! [2]

  4. ensure that Windows Defender is turned on (Vista & Win7) or installed (WinXP)... unless you opt to install Microsoft Security Essentials which will disable the default Defender.

  ... Also ran ccleaner and clean registry, it has not helped either.

  No, it's only issues worse, I assure you!

  TIP: If you ever think that your registry database must be cleaned, repaired, amplified, to the point, cured, twisted, fixed or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions.

  See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

  ===============================================
  [1] Norton Removal Tool: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer products removal tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  [2] HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

• Cannot install updates for windows - 8007371b and 643

  Original title: failedupdates

  I continue to turn updates, but it is not with the following codes 8007371 b and 643 do - what I have to do?

  Hello

  (1) updates you trying to install?

  (2) is the specific question of specific updates?

  (3) have you made recent changes to the computer before the show?

  I suggest the following methods and check if it helps to solve the problem.

  Method 1 run system update tool 0x8007371B ERROR_SXS_TRANSACTION_CLOSURE_INCOMPLETE
  Description of the update of the system for Windows Vista tool
  http://support.Microsoft.com/kb/947821

  Method 2: you receive error code 80070643 0 x or 0 x 643, code error when you use Windows Update or Microsoft Update Web sites to install updates http://support.Microsoft.com/kb/958052
  Registry warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft: http://support.microsoft.com/kb/322756/ Knowledge Base

  Method 3: How to fix the Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

• Cannot install updates for WIndows - error 80070490 and installation disc?

  original title: error 80070490 and installation disc?

  Dell, Vista, x 64 laptop.

  I can not install updates, including Service Pack 2 and IE 8. I managed to fix the other error messages, but this one is a winner.

  I can't follow the steps here because I don't have an installation DVD. The laptop doesn't have a CD/DVD-ROM internal drive and did not come with a disc because everything was preinstalled. Even if I had a disc, my computer does not recognize the CD/DVD-ROM external drive when it is plugged in (a problem at a time!), so it would always help. "The System Update tool does not work on this machine, probably because of that pesky little" compatible operating systems: Windows Vista Service Pack 2 "requirement. I so need SP2 to download the tool which will allow my computer to install SP2? Nice little catch-22 there. I agree with the irony. I disagree with not being able to install updates at all, ever.

  Is it possible to re - install without a disk? Can I solve this problem at all or I'll have to take the laptop to Best Buy and ask them to do some voodoo Geek Squad to it?

  Hello

  Check if your computer has a recovery partition.
  If the computer has a recovery partition, use the recovery partition to restore the computer to factory settings.
  Note:   All programs and data will be lost.  You can make a backup of all important data and reinstall programs.

  You can also contact the manufacturer of your computer, and asking for a disc.

  Windows Update error 80070490
  http://Windows.Microsoft.com/en-GB/Windows-Vista/Windows-Update-error-80070490
  Please note: you must have a disk for Installation of Windows Vista with Service Pack 1 integrated in to perform an upgrade to your computer, like your computer with Service Pack 1.

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  http://support.Microsoft.com/kb/2255099

  Note: Run a repair installation will not damage files and applications that are currently installed on your computer. However, I suggest you to save all the important date of the computer before you perform the upgrade on the spot.

  Thank you

• Cannot install updates on Windows 8. Error code 8000FFFF.

  I would be extremely grateful if someone could help me with my problem, as I am about to throw my laptop out the window.

  I've always had difficulties installing updates for my windows laptop 8 (came pre installed with windows 8) current updates that will not be installed are KB2822241, KB2779444 and KB2871690. When I try to install using windows update I get 8000FFFF error.

  I tried on the advice of this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_update/Windows-Update-error-8000ffff/bd636398-1B34-4270-8693-4c5ad2c5af5e

  but he did not make a difference.

  Thank you very much for your help!

  Apologies for the delay in response.

  Have you checked if the problem persists in the boot?

  You can try to install the updates in the new user account and check if it helps. If the problem persists, I suggest to make the updating of the system and check.

  http://Windows.Microsoft.com/en-in/Windows-8/restore-refresh-reset-PC

  Note: Apps you have installed Web sites and DVD is deleted. The applications provided with your PC and applications that you have installed in the Windows store will be resettled. Windows puts a list of apps removed on your desktop after you refresh your PC.

• Cannot install updates in Windows 8 due to the error Code 80240016

  I can't be updated too Windows 8.1 also. I think that this error has something to do with this problem as well.

  Original title: when trying to install an update from Windows to Windows 8 I constantly get an error 80240016 Code and would like to know how can I do to fix this problem?

  If you see the Windows Update error code 80240016 0 x or 80240016 while trying to install updates, this means usually another installation is in progress.
  http://Windows.Microsoft.com/en-AU/Windows-8/Windows-Update-error-0x80240016

  Why I can't update in the store?
  http://Windows.Microsoft.com/en-us/Windows-8/why-can-t-find-update-store

• Cannot install updates for Windows, error code: 0 x 80070490

  Original title: Errornumber 0 x 80070490

  My update of window does not work. It says something about the Place information has changed and give no suggestion how to repaire it. Its also impossible to reconfigurate windows. Do you have any suggestions?

  With greetings

  Filip

  Hi Filip,

  Were there any changes (hardware or software) to the computer before the show?

  When you use Windows Update or Microsoft Update to install updates, you may receive error code: 0 x 80070490 if the manifest of components (CBS)-based services is corrupted.

  Perform the steps from the link below and see if it helps.

  Error code 0 x 80070490 when you use Windows Update or Microsoft Update to install updates

  Note: Make a backup of all your data to an external device as performing on-site upgrade may cause loss of data.

  Note: updating of Windows 8 will remove all third-party applications installed, and it resets all default Microsoft applications.

  Answer please if you have any questions.

• Cannot install updates for Windows, error code: 0x800703F1

  Original title: Windows update

  Hi people, whenever I try to install an update, I get the 0x800703F1 error code which I also get when I try to enable the hyper-v that can could stop my freezing problems. I'm in Windows 8.

  Things I've tried so far
  • 1.DISM.exe / Online/Cleanup-image /Scanhealth

  DISM.exe / Online/Cleanup-image /Restorehealth

  I ran the two commands cmd and apparently, even after the second command, I get error code 1009 indicating that it is still corrupt.

  It could be a second option which I could have tried and which is the following:

  "Start in Safe Mode, click Start, run, in the open air: type".

  Scanreg /fix
  Click OK or press ENTER.
  Reboot into Normal mode and repeat the update of Windows. »

  But it seems that I get an error that windows can not find?
  In any way, any help from you guys would be appreciated.

  1 REPOST: When (exact date preference) your current subscription to AVG expire? ["Next year: don't cut!"]

  2. What is the number of the last 3 KB three updates that have been installed successfully under your update history? [1]

  3. What does "deleted everything until regedit" means? Have you been messing around in the registry & delete things or...?

  4A. What is the full name of the registry cleaner you are using?

  4B. you have backups of ALL the registry changes cleaners have ALREADY made to your system? [1]

  ===========================================================
  [1] injudicious use of registry cleaners can play a role here. TIP: If you ever think that your registry database must be cleaned, repaired, boosted, point, healed, twisted, fixed, magnified, "swept" or optimized (it isn't), read http://chris.pirillo.com/are-registry-cleaners-safe-to-use/ or http://www.edbott.com/weblog/2005/04/why-i-don ' t-use - Registry cleaners / and then draw your own conclusions.  Related-online http://support.microsoft.com/kb/2563254

• Cannot install updates to Windows on the Satellite L505-13N

  Hi all

  I have a L505-13N and I recently changed the HARD drive. Even if I had a copy of the installation for win7 64 bit disc, there is a message at the beginning of the "set up services" that the installation could not proceed with this material...
  In any case, I installed the 32-bit version that came with the laptot.

  After installation, I tried to install the updates, but it's impossible. In a first time, that there was a message that the service can not started. I restarted services updates and the laptop itself, but nothing different happened. The same message.

  I tried both 'fix it' packages available for windows, but nothing has changed.
  I tried to install an inspection tool for installing sp1 (Windows6 1 - KB947821 - v33 - x 86) and it gives me the 0xc8000247 error message and no installation.

  I tried to install sp1 (from downloaded file - Windows6. 1 - KB976932 - X 86) directly, and it is for me a catastrophic failure with the error E_UNEXPECTED (0x8000ffff).

  All this with the program antivirus-firewall disabled.

  Anyone could offer a solution, because I would like to install at least sp1 (if not to receive updates!).

  Waiting for your answers - proposals,.
  Argi

  > Anyway, I installed the 32-bit version that came with the laptop.
  I guess you used the Toshiba recovery disc that contains the image of Toshiba, including the Windows 32-bit system, Toshiba Software, tools and drivers.

  Windows 0xc8000247 update problem seems to happen to other owners of Windows system, as this issue was already discussed in the Microsoft forums.

  * The 1st alternative: *.
  Please, start the console (cmd.exe) with administrator privileges and run the command
  sfc.exe/scannow

  * 2nd proposal: *.
  Try automatically reset the Windows Update components
  http://support.Microsoft.com/kb/971058

  * 3rd proposal: *.
  Updated the driver Intel "Intel Rapid Storage Technology technology."
  Restart the computer
  Check updates

  Mate good luck. Hope one of these solutions could help you

• 800703F1, C 8007371 error: cannot install updates for windows 7 (x 64)

  I tried to update Windows for a few days, and none of the updates install. some fail to install with the above error codes, and those who have need of a reset then fails.

  I tried using Microsoft to solve this problem, the normal and aggressie options.

  I also tried to use the fix (KB947821), but I was unable to install that.

  I use Kaspersky Antivirus and Windows 7 Home Premium 64-bit.

  Updates failed have been

  KB2286198

  KB2079403

  KB2160329

  KB982664

  KB982665

  KB982799

  KB2183461

  KB981852

  KB978886

  KB983590

  KB980436

  KB982214

  You can get support sponsored by Microsoft through the Office of response-online http://answerdesk.microsoftstore.com

• Cannot install updates from Windows Update...

  I just installed Windows 7 Ultimate on my laptop and everything seems fine... When I tried to go to Windows Update to update my drivers for my devices... I get this:

  Windows Update has encountered an unknown error. Error code: 8024402F

  I tried to use the troubleshooter provided with my Windows 7... Still nothing...

  I'm currently using: Windows 7 Ultimate x 86

  Do not use if possible Windows Update for device drivers. Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.

  If you have Windows 7 drivers then download to a folder on your hard drive and install all of them, starting with the mother/chipset, SATA, LAN card drivers, Audio, Etc., and so on.

  Also check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.