Cannot install updates security KB2281679, KB2296011, KB2387149. Error 800b0100 cod

Similar Questions

• cannot install update security for Windows XP (KB2686509)

  cannot install update security for Windows XP (KB2686509)

  Hello, gsfl Jg,

  Open Windows Update and check if KB2686509 and KB2676562 are or are not installed.

  When you tried to install the update, you would have received an error code.  Please return this zip code which lies in Windows Update.

  Why this update is offered again several times?

  Windows updates are revived until the update is installed on your computer. If this update is already, perhaps an installation failure has occurred. Check log files to install KB for the error codes. For example, the log file of installation KB for this security update would probably "C:\Windows\ KB2686509.log"
  For more information about how to resolve these problems, click on the number below to view the article in the Microsoft Knowledge Base:

  958051 (http://support.microsoft.com/kb/958051/) you receive a "0x8007F0F4" error code when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site

  What should I do if the installation of this update fails with the error "0x8007F0F4"?

  If you receive the "0x8007F0F4" error when you try to install this security update, follow these steps:

  1. Open the Faultykeyboard.log file that is located in the folder %windir%. This log file contains information about the registered keyboard layout files that are not in the folder % Windir%\System32. The log file will resemble the following:
     Keyboard1.dll.\Layoutfiles\keyboard2.dll C:\Windows\System\Kbda1.dll

     Note In this example, the first entry is just a file name. The second entry includes a relative path with the name of the file. The third category includes a full path of the file.

  2. Copy the files that are listed in the Faultykeyboard.log log file in the System32 folder.

  Note Contact Microsoft technical support if you can't find the Faultykeyboard.log file.

  http://support.Microsoft.com/kb/2686509

• automatic updates fail to install.says 6 updates pending installation but when I click on install after installing it says cannot install updates gives 643 and 646 error codes

  need help for the automatic update of work again.has has not worked since October 16. gives error 643 and said 646.IRV 6 updates waiting to be loaded, but when I install and it does its thing, sometimes failed to install updates and gives these errors.clicked on the start menu where it says shuts down your computer and install updates but auto update still does not work

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Cannot install update security for Windows 7 for x 64 Systems (KB2079403) _ base

  I tried and tried without success. I installed the patch, but it doesn't work anymore. Whenever my computer stops trying to install this. What can I do?

  Thank you

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Or you can...

  Start a Windows Update support incident email request for free
  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  Buying to meet problems installing Microsoft security updates also can visit the following page for assistance: https://consumersecuritysupport.microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot install updates Apple or HP. Error "Setup Windows service could not be accessed."

  I am running Windows XP and recently were not able to install updates apple or hp and get an error message saying that windows service install could not be accessed.

  error message when you try to install itunes or apple updates and updates from hp.  It is said: the window installation service could not be accessed. This can occur if you are running windows in safe mode or if windows install is not properly installed.  Contact your support team.

  Hi Linda,.

  You can read the following article and see if it helps.

  Error message when you try to add or remove a program on a computer that is running Windows XP: "the Windows Installer service is not to be accessible.

• Cannot install updates on Windows 8. Error code 8000FFFF.

  I would be extremely grateful if someone could help me with my problem, as I am about to throw my laptop out the window.

  I've always had difficulties installing updates for my windows laptop 8 (came pre installed with windows 8) current updates that will not be installed are KB2822241, KB2779444 and KB2871690. When I try to install using windows update I get 8000FFFF error.

  I tried on the advice of this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_update/Windows-Update-error-8000ffff/bd636398-1B34-4270-8693-4c5ad2c5af5e

  but he did not make a difference.

  Thank you very much for your help!

  Apologies for the delay in response.

  Have you checked if the problem persists in the boot?

  You can try to install the updates in the new user account and check if it helps. If the problem persists, I suggest to make the updating of the system and check.

  http://Windows.Microsoft.com/en-in/Windows-8/restore-refresh-reset-PC

  Note: Apps you have installed Web sites and DVD is deleted. The applications provided with your PC and applications that you have installed in the Windows store will be resettled. Windows puts a list of apps removed on your desktop after you refresh your PC.

• Cannot install updates. Get the 57F error code

  57F code when I try to do the automatic updates.  Have now 10 waiting to be installed, but keep

  From: the information in the Windows Update forum.

  Windows Update forum is one of the three forums that doesn't have different forums for different versions of Windows (Internet Explorer and the game are the others).  With this in mind, we ask that you post at LEAST the following information.  If you don't know how to find some of the information and then post what you can and let us know that you need help to find information.

  Minimum information to validate:
  Version of Windows and Service pack level. (Windows XP Home Edition, SP3; Vista Home Premium, SP1; Windows 7 Ultimate, etc...)
  Post also if you use 32-bit or the 64 bit version of Windows.

  Update the number of the last update installed before any problem.  If you do not know the number of update, then give the date that the update has been installed.  The number of updates update failed.

  Error code updates failed or if you think an update caused a blue screen, give the blue screen error codes.

  Other information to validate:
  Measures already taken to correct the problem and the results of the measures.

  If the question is never happened before with other updates.

  A few other useful parts are:
  What program antivirus you use, if it is up-to-date, and there has never been any other installed antivirus program.
  If your version of Windows has been upgraded from a previous version or if it came with (or clean installed with) the version you are currently using.

  0x0000057E cannot create a top-level child window

  It is possible that a pop-up blocker or 3rd party toolbar causing the error, but without knowing what edition of Windows that you are running, it is impossible to recommend concrete steps to resolve the error. Please send requested information so that someone can help you.

  Thank you!

  MowGreen Services update - consumer safety

• Cannot install updates. I get an error code "80071AA7". Help I don't know anything about computers.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Try to do a reset. See http://support.microsoft.com/kb/971058 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot install update important... get error code66A but can't find is 66.

  The message for updating a major update but I keep getting the error try again message. It says error code 66. can't find what code 66A is.  Anyone know?

  Thank you for your help

  If it's .net 4 chances are you don't no need for the program in the first place - http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/windows-7-error-code-66a-cant-install-kb2160841/11b6b2c5-e780-4343-9de5-ffa4619f45c4 check out this thread, consider uninstalling it is .net4

• Windows 7 - error code: 80004002 & dt000 (cannot install updates)

  When I try to install updates, I get a message Error 80004002 code updates are downloaded, but they will not install

  Edit:

  Using windows 7 pro 64-bit full error message when I go to the Windows Help and support is, "WindowsUpdate_80004002" "WindowsUpdate_dt000"

  See if a reset fix...

  How to reset the Windows Update components?
  [Ignore the section to APPLY to;] KB971058 access via IE8 32 bit only. [Throws the difficulty in DEFAULT and AGGRESSIVE modes, and then restart & test]
  http://support.Microsoft.com/kb/971058

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot install updates Windows XP error Code 0 X 80070670

  original title: CANNOT INSTALL UPDATES WINDOWS XP ERROR CODE 0 X 80070670

  CONTINUE WITH WHAT?

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• Cannot install updates of security for xp #KB2698023 and #2656370

  Cannot install updates for XP #KB2698023 and #KB2656370

  Hi PeteBosch,

  Welcome to the Microsoft community. According to the description of the problem, you are not able to install updates (KB2698023, KB2656370). Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         You are able to install other updates successfully?

  ·         You get the error message?

  ·         You use a third-party security software?

  I suggest you follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 3: Follow the steps in the article.

  How to reset the Windows Update components?

  You can read this article for more information:

  You cannot install some programs or updates

  Note: You must take the backup of the data before performing any installation of windows.

  I hope this helps. Let us know if you need more assistance.

• Cannot install updates. Error code constant of 0x8007001f.

  IE8, SP3 and windows reinstalled update. Still can not install new updates.

  Hello

  (1) update that you are trying to install?

  (2) what is you get the exact error message?

  (3) remember when you make changes to the computer before the show?

  I would suggest trying the following methods and check if it helps.

  Method 1: Run Microsoft Fixit
  The problem with Microsoft Windows Update is not working: http://support.microsoft.com/mats/windows_update/

  Method 2:
  You can also try the steps in the link and check if it helps.
  You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or
  http://support.Microsoft.com/kb/943144

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows:
  http://support.Microsoft.com/kb/322756/

  Method 3:
  If the problem is not resolved, I suggest you try the procedure described in the link mentioned below.

  You cannot install some programs or updates: http://support.Microsoft.com/kb/822798

  Note: It is very important that you back up all your personal data before going ahead with the upgrade on the spot.

  Follow the article below to learn more:
  Temporary connection related errors may occur when you use Windows Update or Microsoft Update
  http://support.Microsoft.com/kb/836941#advmethodC

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• Cannot install update Cumulative security for Internet Explorer 9 under Windows Vista (KB2792100)

  Original title: update KB2792100

  My computer has been tyrying updated Cumulative Seci = security update for Internet Explorer 9 for windows vista for over a month now and it says it fails every time.  Any ideas?

  Hi Jeanlavanway,

  Thanks for posting your question in the Microsoft Community.

  From descriptions of the question, it seems you cannot install update Cumulative security for Internet Explorer 9 under Windows Vista (KB2792100).

  I imagine the inconvenience that you are experiencing. I'll help you fix the problem.

   

  To help you solve the problem, I would appreciate if you could answer the following question:

  1. you receive an error code or message?

  2 is the issue specific to some or all of the updates?

  3. have you made any recent hardware or exchange of software on your computer before the show?

  Please follow the methods and mark the question below:

  Method 1:

  Follow the steps in the link below.

   

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2:

  http://support.Microsoft.com/kb/2509997

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

  http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry.

   

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Method 2:

  I suggest you to install updates and check manually.

  MS13-009: for Internet Explorer Cumulative security update: February 12, 2013:

  http://support.Microsoft.com/kb/2792100

   

  A security update cumulative for Internet Explorer 9 on Windows Vista (KB2792100):

  http://www.Microsoft.com/en-in/Download/details.aspx?ID=36601

   

   

  I hope that the information above helps you.

  Your response is very important for us to ensure a proper resolution.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

   

   

• 8007370c error code cannot install updates

  Have a Dell Inspiron I1720, TS250 @ 1.50 GHz, 2 GB - Ram, running Vista Home Premium.  I tried several times to install 13 updates (recent) starting with MS Net Framwork 3.0 SP2 - Vista, next KB2676562, etc.  Downloaded 13 but do not... settle retried several times, used the MS Fixit Center 3 or 4 times to correct errors of update. Get the following error from long:

  c:\ProgramFiles\MicrosoftFixitCenter\SAPF\System\60BB3EEE-C5FB-4233-B5FE-F8E36C1F78D9.9

  error code 0 x 80040154

  Background: high

  Other updates like MS security Essentials definitions get downloaded & installed without problem... I worked on this for 4 days... someone can help me resolve this quickly... my holiday is coming!

  E-mail address is removed from the privacy *.

  Hello

  Please follow the steps mentioned below and get back to us with the results.

  Method 1: Run (CheckSur.exe) system update readiness tool

  Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information about how to download and run the CheckSur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/947821

  (947821) description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Try to install updates again.

  For more information, see the link below.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  If method 1 did not fix the problem, proceed to method 2.

  Method 2: Run the clean boot and try to install the updates.

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Please note: After troubleshooting, be sure to start your computer in normal mode by following step 7.

  If method 2 has not fixed the problem, proceed to method 3.

  Method 3: Scan of the file system (CFS) auditor.

  Perform a scan of the checker (SFC) system files on your computer. SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  See the following article for more information on using SFC tool to troubleshoot missing or corrupted system files:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  If method 3 has not fixed the problem, go to method 4.

  Method 4: Turn off the Antivirus and firewall.
  
  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/firewall-frequently-asked-questions

  Try to reinstall the update.

  Note: make sure that you enable the antivirus software, other security and firewall after the test programs.

  Warning:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope that helps!