Cannot install Vista on the new hard drive

Similar Questions

• Install Vista on the new hard drive with upgrade media

  Original harddrive in Lenovo has failed. I replaced but didn't have a recovery disk. I bought Windows Ultimate up grade, and he scored when I installed the new drive. After the initial installation, new drive must be reformatted (again). Now windows says my registration number is already installed. It was purchased by me and installed on my original Lenovo machine. I have the original product code on the back of my Lenovo and the new product code on Vista Ultimate box. What can I do to register again? Thank you. Mike

  You must first install the original operating system and activate.  THEN install the Vista upgrade and which activate.  You can't ignore all during the installation of the original operating system.  You can't do a full install of a drive to upgrade (or product key).  I suggest that contact the manufacturer for a set of discs of recovery of re - install the original system.  It is the only way that this is possible.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Can I install Vista on the new hard disk drive recovery?

  Hello

  I'll have to replace the hard drive of my laptop Satellite A 200 and have only a drive with her recovery. I'll be able to install Vista on a new hard drive for him?

  Thank you

  Post edited by: xaver

  Of course, you will be able to do.

• Satellite L40: Can I use Toshiba DVD to install Vista on a new HARD drive

  Hi people,

  I'm new to this forum... I don't know that there, can someone advise me.
  I replace my Satellite L40 HDD with a bigger drive, the current is only 80Gig.

  And my question is, can I use my Toshiba recovery Disc to reinstall Vista on the new HARD drive, or is it a hidden partition on the original HARD drive?
  If someone has done this, would appreciate an idiots guide to doing the same thing.

  Cheerzzzzzzzzzzz...

  Dave

  Of course you can do it.
  The DVD of Vista recovery Toshiba help you install Vista, all the drivers Toshiba and tools, and it automatically creates all the partitions.

  So what you have to do is to boot from the recovery DVD and follow the instructions on-screen ;)

  Check it out!

• Problems installing vista on a new hard drive

  I just finished installing vista on a new hard drive, and now the computer is unable to find internet connections. any suggestion would be great!

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• Restore Vista on the new hard drive in an old computer

  I had to replace a hard drive on an old computer running Vista, and I don't have a restore disc.  BestBuy has provided the activation code of the version of vista on the old hard drive, and I was told that I could contact Microsoft and download Vista to restore on the machine.  Can you help me?

  Moved from Vista programs Forum.

  Hello

  Microsoft supplies more downloads Vista >

  There are several methods to reinstall Vista.

  This can help you (download files and make your own DVDs).

  Vista ultimate is available. Read the information in the lower part of the message on how to use it for other editions of Vista:

  http://www.heidoc.NET/Joomla/technology-science/Microsoft/57-Windows-Vista-direct-download-links

  And here are instructions on how to burn ISO disk images:

  http://www.SnapFiles.com/get/isorecorder.html

  The download links and information on how to make the ISO file, and then create the Setup DVD above are at this link:

  "How to download a Vista ISO and create a Setup DVD or USB"

  http://www.Vistax64.com/tutorials/301852-Vista-ISO-download-create-installation-DVD-USB.html

  "How to create a USB of Vista Installation key '

  http://www.Vistax64.com/tutorials/181538-USB-bootable-Vista-installation-Flash-thumb-drive.html

  ___________________________________

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  ___________________________________

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• I have to make a new hard drive for my Toshiba laptop, how do I get my current operating system (Vista) on the new hard drive?

  I already have Vista running. Last week I had to run the recovery disc that came with my laptop, now I am hearing cracking and screetching coming from the hard drive and it does not start. I intend to buy a new hard drive and replace it myself. How can I move the new Vista of the old hard drive?

  My computer did come with an installation disc, only a recovery disk.

  Probably you need to use the product key on your computer to activate Windows.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• If I replace my hard drive, what I need to do to install my OS (Vista) on the new hard drive? I don't have an OS disc (factyory installed).

  MS Vista was preinstalled on my computer. (I bought it new.) It did not come with a MS Vista program disc.) My hard drive has crashed and I need to replace it. What should I do to get the Vista OS on my new hard drive.

  Hello

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• reinstallation of vista on the new hard drive without disc

  my hard drive failed completely and I replaced it but I do not have a disk of vista product. How to get a vista disk to reinstall on a new hard drive. I have the product key

  Hello

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Install Vista on a new hard drive without a Setup disk

  I have a compaq cq71. The HARD drive is faulty (as told by checking the hard drive) and must be replaced. I'm going to buy a new HARD drive but don't know how I can install Vista on it. I have no Vista disk, only the recovery on the old damaged hard disk partition. Can I access the recovery partition is if possible I can create a floppy disk to install from here? Alternatively, if I could borrow a disk from someone else? I still have the product key of Vista on the bottom of my machine.

  Any help much appreciated.

  I have a compaq cq71. The HARD drive is faulty (as told by checking the hard drive) and must be replaced. I'm going to buy a new HARD drive but don't know how I can install Vista on it. I have no Vista disk, only the recovery on the old damaged hard disk partition. Can I access the recovery partition is if possible I can create a floppy disk to install from here? Alternatively, if I could borrow a disk from someone else? I still have the product key of Vista on the bottom of my machine.

  Any help much appreciated.

  Hey Paul_Dunbar

   
  You can try to make records of the damaged hard drive recovery
  ask hp how
  or buy a set of vista home recovery disks
  they normally sell them for a nominal cost
  http://welcome.HP.com/country/us/en/contact_us.html
  or see if you can borrow a vista microsoft dvd and use your product to install your version of vista it

  Walter, the time zone traveller

• Install Vista on a new HARD drive help

  A few days ago my hard drive died. No idea why, but it has just stopped working. I went out and bought a new hard drive at best buy and went home to install Windows Vista Home Premium. Everything works fine until it gets to "Expand the files" around 26%. Once it gets there it just goes to the 'Blue screen of death '. I use a serious Vista x 86 iso to install it (it was my old OS so I just used the serial code I had). I tried to install it 3 times now and no luck.

  Now when I turn on my computer it will say "press any key to start from the CD or DVD and BOOTMGR is missing. Press Ctrl + Alt + Del to restart"I did another disk and it burned at a lower speed and still happens. Anyone know what is happening?

  Specifications of the computer.
  Processor: AMD Phenom 9750 Quad-Core, 2.40GHz
  Installed memory - 8192 MB/PC2-6400(2048/DDR2 SDRAMx4)
  DD - WD Caviar Green 500 GB SATA

  Or just look to the high HP M9400F.

  (Material I've pulled out because I thought that he was doing this)
  NVIDIA GeForce 9800GT
  Killer Xeno Pro network card.

  Generally, a clean installation of the operating system fails due to a hardware problem or faulty drive or drive
  Try the memory test, www.memtest.org

• Installation of Vista on the new hard drive.

  Recently, the hard drive (Seagate Barracuda 7200.11 750Go) in my HP Pavilion Elite M9350F Desktop has failed.

  I replaced today by a Western Digital Caviar Green WD10EADX 1 TB harddrive.

  After the removal of the old hard drive and the installation of the new, I tried to install Windows vista on it.

  While in the window select a driver to install, I get this message

  "A required CD/DVD drive device driver is missing. If you have a driver floppy, CD, DVD, or USB Flash Drive please insert it now. »

  Followed by this error message when I perform a new crawl for drivers.

  "No device drivers were found. Make sure that the installation media contains the correct drivers, and then click OK. »

  I don't know what to do to fix this error.

  I also ran a report diaognostics and the disk is healthy, but I get error BIOHD-3.

  * Note: I've already been on the Western Digital site and they describe it as either an error with the computer itself, or the hard drive has failed, which I do not have to be the case since I bought it today.

  Two SATA drivers I posted above (from your page drivers)-choose which is right for your installation. One is for Vista 32 bit, the other is for Vista 64-bit. Use something like the free 7Zip to extract the files to a folder. Place the files on a flash drive and when the message arrives you need the driver cd/dvd insert the flash drive.

  I didn't need or used this procedure personally, but it seemed to work for others.

• XPS 420 - HARD drive failed, performing a clean install of Vista on the new HARD drive.

  Hey everybody,

  My on my XPS 420 HARD drive failed and I'm trying to reinstall Vista using the disc that came with my machine back when I bought it.

  I bought a new WD10EZEXAZ (1 TB Serial ATA HDD), he rose in the same dwelling as my old HDD (ST3750630AS * Barracuda 7200.11*). I start the PC and goto Setup, it recognizes the HARD drive in the blue menu.

  Then I boot with the CD of Vista that came with my system. I proceed as indicated through the following url:

  Clean install of Vista

  After its copied files, expanded the files, installed features, updates installed... it goes to "Complete Installation" and throws an error message: "Windows Setup could not configure Windows to run on a hardware on this computer."

  I tried a few things I've seen posted on the internet, including trying to run msoobe.exe via command line. When I did, it allows me to Setup user... but finally I get sent to this message of error or another telling me I have to reinstall Windows.

  I read else where some hard disks may not compatible with the Dell disk provides with my OEM machine. If this is the case, can someone advise? I really didn't want to spend $100 one another on a Windows 7 disc, but I feel like this may be my only option... but even in this case, I'm not so sure this will work or the other.

  Any help would be greatly appreciated,

  Tony

  UPDATE *.
  Did some more research, I discovered my new drive HARD is an advanced HDD format... not sure if it has nothing to do with my problems (by www.wdc.com/advformat Vista should not need to perform the work before the OS being installed), but thought I would mention it.

  Thanks again for any help.

  ****************

  Seems that I found the solution to my problem.

  Problem has been fixed by going into the BIOS and change the Mode of Port SATA to IDE/native/AHCI native. After that, the installation worked without any problems. Seems that Windows Setup did not like the port mode is set to RAID.

  Just thought I would post back everybody incase has had the same problem.

• Cannot install Windows 7 on new hard drive, it says that it cannot parition it nor did he have any predefined partition.

  Original title: I am replacing a hard drive in a laptop Toshiba L670 with a seagate ssd.

  I am replacing a hard drive in a laptop Toshiba L670 with a seagate ssd. . The hard drive was dead, so I have to load windows from a flash drive. I am trying to load windows 7 on the new drive, but the software does not recognize.  It is said that he can not parition it nor did he have any predefined partition. Anyone out there have any suggestions? When I try to find a driver there doesn't seem to be all for this issue. Any suggestions will be appreciated. Scott

  Hi Scott,.

  The cause of this issue with all of the troubleshooting steps to resolve this problem, are suggested in the link mentioned below. Please refer to him and check if it helps.

  You cannot select or format a disk partition hard when you try to install Windows Vista, Windows 7 or Windows Server 2008 R2.

  http://support.Microsoft.com/kb/927520/en-us

  CHKDSK WARNING: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  If you receive errors that your Windows 7 is not genuine, please turn it on.

  Activate Windows on this computer

  http://Windows.Microsoft.com/en-in/Windows/activate-Windows#1TC=Windows-7

  Hope that the information provided is useful. If the problem persists, please answer and we will be happy to help you.

• Reinstall Vista on the new hard drive

  I bought laptop acer new with windows vista operating system license (registered internet), after 1 year, my hard drive was damaged, recovery is not possible and also my laptop has no guarantee more (more than 1 year used) so I replaced it with a new hardisk, can I install back under license of windows vista by using the previous serial number licensed vista O.S.? I know that I can reuse previous serial number, but I can't do windows update over the internet because microsoft detects my windows as not genuine, since I registered my new laptop on windows website, so I could turn on the automatic updates of windows. Please help me.

  The license of Vista is up to you to reinstall on the same laptop.

  http://support.Microsoft.com/kb/940315/en-AU

  How to activate Windows Vista, if necessary.

  How to get the recovery media Vista to make it back to factory settings .

  There is no Vista free download legal available.

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

  Contact Acer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner