Cannot install Windows Server on the new server Poweredge T110 II 2012

Similar Questions

• Portege M400 - cannot install Windows XP on the new HARD drive

  Hello here is my problem,

  I bought an older Portegre M400 E, without a HARD drive. So I buy a new Samsung 400 GB. I looked in the Bios (ACPI BIOS Version 3.40) and it is ok. He shows me the HARD drive with built in Assign LD - 0 status ONLINE, 400 GB size so it seems to be nice. Changed the matrix Raid, described in the manual, in condition to create 1Raid-0
  So, I want to boot from the Windows XP CD, not recovering my own.

  Windows open to the top and after a short period, the installation ends with the message that it is not any HARD drive. This I try sometimes :-( Hope someone can help me.
  Do not forget that I didn't have any HARD disk with the dates of the laptop.

  Thank you Carsten
  (Sorry my English is not so good Im from the Germany)

  Wilkommen!

  > Changed the matrix Raid, described in the manual, in condition to create 1Raid-0

  I don't know much about your model, but I think that something wrong with the raid in the Bios settings. What other options are available in the Bios for the State of the hard drive? I found the RAID driver on the Toshiba driver page. It is possible, that you can integrate in with a program called nlite Windows installation disc or install Windows as in compatibility mode, and install the Raid driver. then

• Cannot install Windows 8 with the new drive, because the key will not

  I just rebuilt a 64-bit pc. I had windows 7 on it and decided to do a clean install of windows 8. Bought a version OEM from Amazon yesterday. Arrived today and the disc was in double sealed package of Microsoft Corporation.  The package comes with the key in very small print on the back that I had to read with a magnifying glass. This key is not accepted during the installation of the software. I checked that it was OK and I tried several times but the key has not been accepted. What should I do now?

  Hello

  I assume you are using the disk that came with the OEM key to install your system? If you are then the only people who can help you is the team of Microsoft License, you can contact them here:

  The United States customer service phone number is:
  1-800-Microsoft (642-7676)

  If you need a different language, please see this list http://support.microsoft.com/gp/customer-service-phone-numbers

  I hope that these tips help you a bit

• Cannot install Windows server 2012

  Cannot install Windows server 2012. Whenever I get * error

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• STOP STOP 0x0000008e error error messages appear after trying to install Windows XP on the new drive

  Original title: Stop error 0x0000008e error displayed after trying to install Windows XP on the new drive

  STOP 0x0000008e error. Also setupdd.sys - address F740DFEA base at F73EC000, Datestamp41107c8f. After trying to install Windows XP on a new hard drive. Never been in the BIOS. A bit afraid to change much, but it is said that the caching and shadowing should be turned off and boot into Safe Mode, but I cannot get Safe Mode because there is no OS on the drive. Also, he wants to know if I want to install Windows XP to a partition on the disk. I looked at other readers, and there is a partition, so I think I should. Any information would be appreciated. "Just an old fart."

  Hello

  See the following article: error message "STOP 0x0000008e" during the installation of Windows XP

• Cannot use windows update after the new installation of xp sp2

  Cannot use windows update after the new installation of xp sp2

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• How can I install Windows 7 onto the new drive while keeping Windows XP on the old drive?

  Wow for on 1 computer install 2 operating systems with 2 hd

  I have 2 hard drives; We have Windows XP and the new one is empty (empty) installed on a computer.  I would like to install Windows 7 on the new hard drive.  How can I install Windows 7 onto the new drive while keeping Windows XP on the old drive?

  Thank you

  Hello

  Sound pretty simple you just need to start from the disc and choose the 2nd hard drive during the installation of windows 7
  your xp will remain such what. every time that you start the system it will ask you to choose which operating system you need
  Start with.
  thanx.

• Cannot install Windows 8 on the replacement hard drive

  I got the replacement from Dell hard drive which he said would come with Windows 8 and pre-installed drivers. Well, I installed the hard drive and he said no. OS can be found. I didn't have a chance to make my own backup discs, but Dell sent a CD Windows 8 recovery media with the laptop and now with the replacement hard drive.

  When you try to install Windows 8 on the new hard drive, I get to the part where it tells me to choose a partition to install Windows 8 on and none of them will not let me. There are 5 to choose from and I don't know what to do to get past this. The largest partition either 5A about 934 GB of space left out of 1 TB, but as I said I can't choose it or one of the other ones for the installation.

  You just have to click on next, in any case, despite the message?  Otherwise:

  Start on the DVD of Windows 8, instead of install now, click repair your computer, Advanced Options, invites ... when it opens, type the following:

  DiskPart
  Select disk 0
  clean

  Then, try to install.

  The above will remove all the data partition and disk, allowing you to do a clean install on an empty drive (these scores are not required, and Windows will create its own partitions (two) he needs to install and run).

• the UCS blade iscsi initialization cannot install windows server

  Hi all

  I have a problem when I try to install windows server 2008 in the storage of nexenta using iSCSI via ucs b-series, but his works well when I install ESXi 5.5. I can't find disk under windows server installation, and I see all the LUNS in ESXi what im create before nexenta storage and work when I install it.

  This vnic iSCSI Configuration:
  ----------------------------
  vnic_id: 13
  LINK_STATE: to the top

  Initiator Cfg:
  initiator_state: ISCSI_INITIATOR_READY
  initiator_error_code: ISCSI_BOOT_NIC_NO_ERROR
  VLAN: 0
  DHCP status: false
  IQN: test: iqn.2014 - 11.com.:8
  IP address: 192.168.1.59
  Subnet mask: 255.255.255.0
  Gateway: 192.168.1.5

  Cfg of target:
  Target the Idx: 0
  State: ISCSI_TARGET_READY
  State of PREV: ISCSI_TARGET_DISABLED
  Target error: ISCSI_TARGET_NO_ERROR
  IQN: iqn.2010 - 08.org.illumos:02:windowsboot
  IP address: 192.168.1.49
  Port: 3260
  Starting logical unit number: 6
  Ping statistics: success (986.646ms)

  Info session:
  session_id: 0
  host_number: 0
  bus_number: 0
  target_id: 0

  can anyone help me to solve this problem?

  Thanks in advance - Fabre

  ENIC / fnic driver must be installed. they are not part of any Windows operating system.

  they can be found in

  Home downloads
  Products
  Servers - unified Computing
  Series B UCS Blade Server Software
   
  Unified Computing System (UCS) Drivers - 2.2 (3)

  ISO image of drivers based on the UCS 
  UCS-bxxx - drivers. 2.2.3.iso

  Depending on the version of the UCS.

• Cannot install windows 7 using the uefi on hp laptop

  Cannot install windows 7 in uefi on computer mode hp laptop.

  What is the error you received? Generally the new laptops are designed as is not compatible with windows 7, as a mine.

  When I try to install W7 it up without hard drive found.

• Cannot install windows XP on the Satellite Pro A200-1N2

  Jin

  I have a Toshiba Satellite A200 - 1N2 PSAE3E and I don't want Vista on my laptop. I downgraded the bios to V5.30 but still cannot install windows xp and there is still no optin for SATA in the bios.

  Can someone help me?

  Thank you.

  Hello

  Did you install the SATA drivers first?
  You need this driver to recognize the HARD drive!

  You must download the Intel Matrix Storage Manager. You should find it on the page of the Toshiba driver or the Intel Web site.

  You must perform the installation of an external USB FDD drive using the F6 key during the installation of Win XP.

• How to install Windows 7 on the new hard drive?

  I changed the old hard drive (500 GB) with a new hard dirve (1 Tera) and now I have two problems:-

  1. how to install Windows 7 on a new hard drive?

  2. my laptop came preinstalled Windows 7 Pro, but all the DVD kit (disk reclaimer Application & discs) + Revocer operating system, which has been provided (by Lenovo) for the laptop is in the Windows 8 Pro. So, how to install Windows 7 Pro, my laptop while all the DVD sets are in Windows 8 Pro?

  either way, this is my laptop spec (for reference); -

  

  * Note *.
  I intend to install Windows 7 Pro on my new hard drive using another DVD of Windows 7 (not DVD provided by Lenovo), but how do all Leveno program located in the disk 'Application & recuperator readers' (by example; - Lenovo system health and Diagnostics, Lenovo Power Control, Lenovo Fingerprint Reader) to install this hard drive? (as I told you before, all the DVD kit is at or only for Windows 8 Pro)

  I hope someone will help me answer my question,
  Thank you

  I found the solution.

  Response to question 1; using a recovery & backup software to clone my current operating system, and then transfer them to my new hard drive.

  Response to question 2; Download all drivers and software (all the application that located on the DVD of the kit I have) on the official website of Lenovo.

  or another solution, send to a computer service shop and let the experts (workers) install it for me (the most simple and sure way).

• HP a6130n install Windows XP on the new drive

  Hello

  This is my first post here.  I think I need a new hard drive for my a6130n HP install Windows XP.

  When I tried to install Windows XP on the drive – which had Vista - I kept getting several error messages whenever I tried.  Once or twice I was told to press a button if I was going to enter additional drivers out of a CD.  Then I learned all my space partition was used, so I thought that my hard drive was dead.

  I installed XP on Dells before and it was pretty simple - and never asked me if I had to add drivers.  So, I wonder, if indeed, my current hard drive is dead, can I 'just' put in a new HD Sata, get ready to go on a CD disc or memory - a6130n HP drivers and load Windows XP?

  Or should I find and buy a new hard drive with XP already and the drivers loaded and not try to do it myself?

  Thanks in advance.

  Thanks for all your help!

  I'll try that... once more!  With a new/good HD!

• Install Windows 7 on the new hard drive with USB operating system recovery?

  I have an Alienware 2015 15 which does not come with a CD player. I install a new hard drive (SSD 2280 m2), so the question is how to install WIndows 7.

  While Microsoft offers an OS IOS for WIndows 8 download that you can put on a USB (with dell, I think that it automatically pulls the product key of BONE off the coast of the motherboard?) this IOS download is not available for Windows 7.

  So the question is the recovery USB OS offered by dell will allow me to do a fresh install of Windows 7 on a new hard drive in the laptop even USB from recovery of the BONES came with. My last resort is to buy a new copy of windows 7 and a USB external CD/DVD drive.

  TLDR: OS Recovery USB offered by dell will install Windows 7 on a new hard drive.

  The factory restore USB will work on another drive. I did this procedure with the media created from the latest version of Dell backup and restore on my Inspiron 13 7347 and demonstrated the creation of media and installation on a new SSD:

  http://dellwindowsreinstallationguide.com/Dell-backup-and-recovery/

  Since you are using use Alienware Alienware Respawn. Alienware respawn is very similar to Dell backup and restore.

• Cannot install windows server 2012 on VM

  Well, I installed virtual box. I downloaded the ISO and VHD in windows server 2012 but will not be accepted by the Virtual box?

  Josh,

  I would have you post here.

  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads

  Back to us for problems with Windows in the future.