Cannot install windows updates after the recent update of norton

Similar Questions

• Cannot install Windows XP after the purchase of disk

  I put the disk for Windows xp, but cannot be installed

  You should really start a new thread on this question of yours.  I'll send a message to the moderator to separate this question from this old thread and create a new one for you.

  In any case, if you have installed vista, xp will not be able to install automatically. It's because you try to downgrade your computer.

  However, if the computer already had xp on the computer, and then you could upgrade to vista automatically.

  You'd have to do is to format the hard disk in the first place, until xp can be reinstalled.

  But there may be another problem for you at this time.

  You see, if you have a computer that has been designed to use vista then xp is maybe not able to work on this computer.   You will have to go place of origin of the computer and see if your machine has hardware drivers that can be used by xp.  In others, you should check if there are drivers xp for your computer model.

  If this is not the case, then it means that your computer cannot start xp, even if you reformat the hard drive and install a new copy of xp on it.

  What is the brand and model of your computer?

• Cannot install Windows updates (has no status) on the computer desktop and laptop

  Desktop               (Purchase date: 13/07/2010)

  Model: Pavilion p6402f or 6402f

  Product: BK275AA #ABL

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 1 64-bit

  Product ID: {removed privacy}

  Portable               (Purchase date: 14/07/2011)

  Model: Pavilion g6 Notebook PC

  Product: QD317UA #ABC

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 164-bit

  Product ID: {removed privacy}

  Description of the problem: same problem on the computer desktop and laptop at the same time began: cannot install Windows updates (has no status)

  No hardware changes or software recently made to the system: I followed the usual procedure to install Windows updates.

  Method of connection: wireless

  Technical expertise: intermediate level

  Performed troubleshooting: because the error # 80071 A 90 type indicated by the system, I followed the instructions of Windows Help and Support, for example to run Microsoft Fix it which did not work; a more advanced method has also been used, who recommended to start Windows Update in Mode safe, then open Windows Update and install the updates and then restart normally. At this point, the problem was that any stage of Windows Update was available.

  Hello amib004,

  As much as I know, only Windows Update cannot be run in safe mode. That being said, I saw where install several updates may conflict with each other. Try to disable all updates installation and install the updates failed one at a time.

• Cannot install window updates 14 altogether 646 of the code

  Cannot install window updates 14 altogether 646 of the code

  luckyslap,

  read the problems known in this page, they explain what to do. There is a link to a fix the article.

  http://support.Microsoft.com/kb/2258121

  Let us know if this helped.

• Get the error code 641, cannot install Windows updates.

  Reluctant to do a reinstall of windows.  I had the same problem, find the same useless information on a cure.  I did a reinstall of windows (Vista) and partially by installing the updates of windows I ran into the same problem again, the windows installer does not.  Even from scratch will get not anywhere, leaving you at least your system as it stands leaves can be used instead of a partially updated with no program system.

  I wonder if Apple has this kind of problem?
  Split of: http://answers.microsoft.com/en-us/windows/forum/windows_7-system/get-error-code-641-cannot-install-windows-updates/c3f6c853-10e9-4585-b941-f960e02cf9a4

  Hello

  I suggest to reset the Windows Update components and check if it helps.

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us

  Let us know if it helps.

• Cannot install Windows update - error 8007003 - updated fails repeatedley

  Cannot install Windows update - error 8007003 occurs whenever I try to update

  Would have been nice if you included the Windows operating system you are using, but nevertheless (pick that applies to you).

  Windows XP

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
  http://support.Microsoft.com/kb/910336

  When you search for available updates on the update site, you see the Error 80070002 0 x or 0 x 80070003
  http://update.Microsoft.com/windowsupdate/v6/showarticle.aspx?articleid=17&LN=EN&IsMu=false

  Error message when you try to download the updates on the Microsoft Windows Update Web site or from the Microsoft Update on a Windows XP computer's Web site: "0 x 80070003".
  http://support.Microsoft.com/kb/916248

  Vista

  Windows Update error 80070003
  http://windowshelp.Microsoft.com/Windows/en-us/help/dc8636cd-4742-4e4e-B07C-a8cc9c684b261033.mspx

  Description of the update of the system for Windows Vista tool
  http://support.Microsoft.com/kb/947821
  0 X 80070002 ERROR_FILE_NOT_FOUND

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
  http://support.Microsoft.com/kb/910336

  Error message when you try to download updates from Windows Update on a computer that is running Windows Vista: "error 0 x 80070003 the system cannot find the path specified."
  http://support.Microsoft.com/kb/942967

  And here's one for Windows 7

  Windows Update error 80070003
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80070003

  TaurArian [MVP] 2005-2010 - Update Services

• Cannot install windows update kb969947 error code 800F0816

  Cannot install windows update kb969947 (for vista) everytime I try after that restart the computer should go back to a previous restore point to operate

  error code 800F0816

  See the section "How to get help" of http://support.microsoft.com/kb/969947

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Or you can...

  Launch a collateral request for assistance free Windows Update:
  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  Consumer Security Support homepage
  https://consumersecuritysupport.Microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot install windows update kb2686509

  Cannot install windows update kb2686509

  Hi marksherick,

  If you are unable to install KB2686509, follow the steps described in this document that is specific to not be able to install this update.

  You can also try the following troubleshooting options described in the links below:

  Reset the Windows Update components

  You cannot install some programs or updates

• Cannot install windows update, error: updates have not been configured correctly. The system then returns

  Original title: Windows updates fail to configure.

  I wonder to install Windows updates. I do and I am told they have installed.  When I have to restart my computer, I get a message that the updates have not been configured correctly. The system then returns. Next time I turn on the computer I get a message saying that updates have not been successful.  This has happened for months. I think that my computer is very slow because of it. I also think that my computer is a little short on memory. It is an Inspiron 530 with 1 GB memory

  Hello

  I suggest you try the steps from the link below and check if it helps.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates: http://support.microsoft.com/kb/949358

  I hope this information is useful.

• Error 0 x 80240036, 0x8024400A, cannot install Windows updates

  Original title: cannot access windows update Center to down load my updates.

  I keep getting these two error messages whenever I try to install windows on my computer updates.

  I have windows XP Home Edition

  Error number: 0 x 80240036

  Error number: 0x8024400A

  Thank you, Bob Taylor * address email is removed from the privacy *

  PS I'll install a new windows XP on my hard drive now. Who could do

  Hello

  Have you done a recent software or changes to the material on the computer?

  I suggest you to check the updates could be the cause of the problem. To do

  (a) go to control panel,.

  (b) click on Add/Remove programs.

  (c) scroll through the list of programs, and downstairs, you will find all the updates that are installed with their numbers categories.

  Provide us with the number if the issue not be resolved after following the methods.

  Method 1:

  I suggest you run the FIXIT from the link below and.

  The problem with Microsoft Windows Update is not working:

  http://support.Microsoft.com/mats/windows_update/

  Try installing updates and if the issue gets not solve, go to the method 2:

  Method 2:

  If the problem is not solve I suggest you try the procedure described in the link mentioned below.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/( )

  
  How to back up and restore the registry in Windows

  And take note: While running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk to be lost.

  Method 3:

  You can also try the steps from the link below if the above methods fail. Run the FIXIT and if it does not help, try the manual steps.

  Temporary connection related errors may occur when you use Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/836941

  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Hope this information is useful.

• 0x8024400A error, cannot install Windows updates.

  Original title: error cannot access windows update

  0x8024400A error message

  Hello

  1. you have any application installed on the computer security?

  2 did you a recent software or changes to the material on the computer?

  I suggest you run the FIXIT from the link below and. You can also try other steps listed in this article.

  Temporary connection related errors may occur when you use Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/836941

  Hope this helps and keep us posted.

• Cannot install windows update, error: configuration of updates. Step 3 of 3. 0% complete. Do not turn off your computer

  Original title: My laptop has frozen all by installing a Windows Vista Automatic Update

  My Samsung R70 was installing an update when it stuck on a screen saying, "Configuring Updates. Step 3 of 3. 0% complete. Do not turn off your computer. "After several hours, I turn off my laptop and since then I tried to open safe mode. I removed the battery and let the power drain before restarting and I also tried to startup, Samsung II of the recovery and restoration of the system repair. Nothing works! When I start I get the same "Configuring Updates" screen and I can't get in front of her.

  Someone at - it ideas? Thanks a lot in anticipation!

  Hello

  I suggest you try the steps from the link below and check if it helps.

  Default configuration of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates: http://support.microsoft.com/kb/949358

  Hope this information is useful.

• Cannot install Windows updates. It hangs at 0%.

  Original title: Windows update is running is not on a computer brand new out of the box for Christmas :(

  New Asus desktop computer, win8, suppose to be able to go to 8.1.  The first thing I try to run windows update, first he said windows update must be updated, OK, whereas he is 118 updates, but when I click Update or install nothing happens.  I reboot, it will but KB/% download remains 0% as more than an hour, so its not really?  I tried only selection 68 updates, same thing.  The service runs, I've never seen a new computer does not work, it was for my children and I am very disappointed.  Can it be fixed or do I return it?

  Joy

  Hi Joy,.

  Thanks for posting on the Microsoft Community.

  I'm sorry to know that you are unable to install Windows updates. It could be due to issue with windows components or services.

  1. What is the brand and model of the computer?
  2. Did you do changes on the computer, before the show?
  3. You receive an error when updates fail to install?

  You can try the methods below and check if help.

  If your computer is experiencing problems find and install updates of the operating system, try using the troubleshooting Windows Update tool to solve the problem. He makes sure your computer is connected to the Internet and checks to see if your network card and Windows Update services are running properly.

  I suggest to use the windows update to convenience store and then try to install the updates.

  Method 1: Run the Windows Update troubleshooting tool.

  Windows Update Troubleshooter
  http://go.Microsoft.com/?linkid=9830262

  Method 2: Try to install the update by placing the computer in the boot.

  A clean boot helps eliminate software conflicts and determine what is the cause of the problem. Perform a clean boot on the computer by following the steps in the link:

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135
  Note: After troubleshooting, consult this "How to reset the computer to start normally after a boot minimum troubleshooting" section in the link above.

  Additional information:
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-8/troubleshoot-problems-installing-updates

  Hope this solves the problem. If the problem persists, you can write back to us and we will be happy to help you further.

• ThinkPad R60 cannot install Windows XP After erasing the HARD drive using the lenovo diagnostic utility

  WinXP pro Setup cannot find that any installed HARD disk so cannot install windows. Unfortunately after many attempts to use rescue and recovery to restore the factory settings and for some reason constantly default... After leaving another utility popped up giving me the opportunity to erase the HARD drive and so I did... After fact as well and all I had was a blank screen, no windows more or no matter what utility to reinstall windows, then I used my winxp pro installation CD, but the program installation would continue not after a certain point by saying that the installation did not find any HARD disk installed. followed by "ensure that any disk HARD r turned on and correctly connected, and that no matter what material associated drive configured correctly, this may involve running a manufacturer provided diagnostic or Setup program. Clearly it took me by surprise. What was supposed to be a cut to white erase and reinstall now me baffled and angry. Formats the HDD of the solution? If so why didn't not the usefulness of lenovo do... If not, what is the problem? Someone help pls

  Welcome to the forum!

  Go into the BIOS (F1 at startup), set the "compatible" SATA mode (NO AHCI), then press F10 to save and exit, and you should be all set.

  Good luck.

• Cannot install windows XP on the Satellite Pro A200-1N2

  Jin

  I have a Toshiba Satellite A200 - 1N2 PSAE3E and I don't want Vista on my laptop. I downgraded the bios to V5.30 but still cannot install windows xp and there is still no optin for SATA in the bios.

  Can someone help me?

  Thank you.

  Hello

  Did you install the SATA drivers first?
  You need this driver to recognize the HARD drive!

  You must download the Intel Matrix Storage Manager. You should find it on the page of the Toshiba driver or the Intel Web site.

  You must perform the installation of an external USB FDD drive using the F6 key during the installation of Win XP.

• Cannot install windows 7 using the uefi on hp laptop

  Cannot install windows 7 in uefi on computer mode hp laptop.

  What is the error you received? Generally the new laptops are designed as is not compatible with windows 7, as a mine.

  When I try to install W7 it up without hard drive found.