Cannot install Windows vista service pack 2

Similar Questions

• Cannot install windows vista service pack 1, 57 gives error code

  When you install windows vista service pack 1 that it says code 57 Windows update has encountered an error can someone help please?

  Hello

  (1) what is the exact\complete error message you get?
  (2) remember to make changes to the computer before the question?
   
  See the methods mentioned below and check if that helps.
  Method 1:
  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
  Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
  Method 2:
  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Note: You should not turn off Windows Firewall unless you have another firewall is enabled. Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.
   
  Method 3:
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/
   
  Hope this information helps.

• Cannot install Windows Vista Service Pack 2. The following error message appears: 0X800707d1

  Hello

  Three years ago, I bought a Dell Inspiron 1525 laptop. Never met a problem until I tried to install Windows Vista Service Pack 2. I already followed each step instructions Support of Microsoft issues Service Pack for any result or solution. In these cases, I have downloaded the pack update directly from the wepage of Windows Vista, installed Windows Update Readiness Tool, disabled my antivirus (McAfee) and came up with nothing. I even tried to install this update in Mode safe but also failed to install Service Pack 2.

  What is happening all the time, is that I double click on archive downloaded in order to install (having already started my computer in Mode safe mode with networking reportoire and disabled the antivirus as well as its firewall). The Service Pack window opens and I click 'Next' for all the necessary instructions, including 'the computer automatically restarts. When the toolbar installation is completed, the computer automatically goes to restart itself. 3 steps appear as a requirement for the completion of the installation process. All goes well until he reaches "step 3 of 3:100% finished. Do not turn off your computer. After about ten minutes of stall in this step, the following message appears on the screen: "the Service Pack cannot be installed, returning from changes. Do not turn off your computer.

  The computer then rolls back all the changes and initiated in the normal state. After the opening, the first window that appears displays the following message: "the specific driver is not valid. "(Details): error: ERROR_BAD_DRIVER (0x800707d1). I proceeded to check and update alone driver of my computer, then try again to install the Windows Vista SP2 and all the operation has been a failure. I was cracking my head trying to solve this particular problem, and each time the same error pops up. I am seriously considering reformatting Windows Vista from manufacturer CD from my Dell, but I don't know if that would help.

  If someone could help or advise with everything that I would appreciate it a lot.

  Kind regards

  Rodrigo

  Hello

  Method 1: Follow the steps from the links below and check if the problem persists.
   
  Step 1: Safe Mode
  I suggest to start the computer in safe mode, then try to remove the Briefcase icon and check if it helps.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
  If the problem persists, I suggest you follow step 2 and check.
  Step 2: Clean Boot Mode
  I suggest to maintain the computer in clean boot mode and check if the problem still persists. A clean boot to check if startup item or services to third-party application is causing this issue.
  You can read the following article to configure the computer to boot:
  http://support.Microsoft.com/kb/929135
  Note: After the troubleshooting steps, please refer to clean the start link to configure the computer to normal startup mode.
  Method 2:
  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358
   
  Hope this information helps.

• Cannot install windows vista service pack 1 and 2 error: 8007006E

  Original title: Windows Service Pack 1 and 2 will be not updated

  I tried a few times to download the Service packs 1 and 2 so that I can reinstall my Windows live messenger. I didn't have time to let it run full the last time, but this time, her gives me: "error (s) found: Code 8007006E - Windows has encountered an unknown error.

  Usually I have no problem with my updates, they fit very well. This time, of course when I need it, he decides to not work (Murphey's law).
  How to fix this or get to download correctly, so I can reuse my Messenger? I uninstalled my Messenger when it stopped working (would not allow me to connect to all) for about a month or two.
  Thank you!!!

  Hello

  1. can you install other windows updates?

  I suggest you to follow the steps below and check if it helps.

  Method 1: Try to reset the Windows update components and check to see if the same problem happens: http://support.microsoft.com/kb/971058

  Method 2:

   Try to put your computer in a clean boot state, and then try to install Windows vista service pack 1 and 2 manually.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3: Try to install Windows vista service pack 1 and 2 from the link below.

  Service pack 1: http://windows.microsoft.com/en-US/windows-vista/Learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

  Service pack 2: http://windows.microsoft.com/en-US/windows-vista/Learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  You can also consult the following link for more information:

  Troubleshoot problems with installing updates.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Hope this information is useful.

• Cannot install Windows Vista Service Pack

  When I try to install the update for Windows vista Service Pack I get the 8024200f error, and the update fails.

  It's the wrong Forum for Windows updates or Service Pack questions.

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot install Windows Vista Service Pack 1 update

  I just bought Windows 7 because of all the problems I have with Vista. I did the update Advisor and he told me that I had to update my windows vista with service pack before I can upgrade to Windows 7. When I tried to install, it says update failed. The number, he gives me is KB936330. Can someone help me with this? Thank you. I had many problems in the past trying to install updates also.

  You post your question in the wrong Forum.

  Windows Update Forum:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot install windows vista service pack 1

  I wanted to upgrade windows vista home edition premium to windows vista sp1.however when I was installing, it says the installation failed. and an internal error had interrupted the installation. is the error code: 0x8007000D. and there is a link for more details about the error. from this link, it said components Servicing Windows have problem or a program interferes with the installation.however I double checked there are no other programs running. and also do I really need to make a backup before you install this update

  Hi Myteo,

  If you have important data and if you want to save the files you can back up the files on external media or a disc for your safety

  The links below to learn more about backup and restore access files.

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-files

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/methods-for-backing-up-your-files

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install windows vista service pack 2 error: 0xc0190036

  Original title: Error Windows Vista Edition Home Premium x 64 SP2 on HP Pavilion dv4 laptop

  I have problems when I try to install SP2 to Vista Home Premium x 64 on my HP Pavilion dv4 laptop.  After you restart the download and installation of SP2, my computer initializes a complete analysis of the system in the BACK and freezes when it reaches advapi32.dll with error code! 0xc0190036.!  Does anyone have a solution or advice for me? Thank you for your help.

  Hello

  I suggest you to follow the steps from the link below and check if it helps:

  http://support.Microsoft.com/kb/975430
   

  Hope this information is useful.

• When trying to install windows vista service pack 2 I get this error: "Element not found" (0 x 80070490)

  Cannot install windows vista service pack 2

  http://support.Microsoft.com/kb/958044

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  Windows Vista and Windows Server 2008 to solve this problem, you must perform a repair of Windows Vista or Windows Server 2008 installation. Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD.

  Note Run a repair installation will not damage files and applications that are currently installed on your computer.

  To perform a repair of Windows Vista or Windows Server 2008 installation, follow these steps:

  1. Close all applications and restart the computer.
  2. Insert the Windows Vista DVD or Windows Server 2008 DVD into the DVD drive of the computer.
  3. In the settings window, click install now.

     Note If Windows does not automatically detect the DVD, follow these steps:

     1. Click Start
        Collapse this includes this image

        

        and then type Drive: \setup.exe in the box start the search .

        Note The placeholder drive is the drive letter of the computer's DVD.

     2. In the list of programs , click Setup.exe.
     3. In the settings window, click install now.
  4. Click connect to get the latest updates for installation (recommended).
  5. Type the CD key if you are prompted to do so.
  6. Click Yes to accept the Microsoft software license agreement.
  7. On the which type of installation do you want? of the screen, click upgrade.
  8. When the installation is complete, restart your computer and try again to install updates.

  If the above does not resolve the problem:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Try to install Windows Vista Service pack, but I cannot get past that the terms of the license pop-up ads.

  Install service pack for my Vista program,

  ... can not get past the license terms box pop... Help!

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/947366

  Also check out this link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  It will be useful.

• my laptop is messed up after installing Windows Vista Service Pack 2

  My internet does not work and a message came up saying "internet explore has stopped working, there is a problem, windows will let you know if there is a solution" a box then came advising me to install Windows Vista Service Pack 2 and I did and now my laptop is messed up. After that I connected, a black screen appears then I found a solution in another forum and able to-> explorer.exe task manager and a something regedit and once my computer has restarted after it is a message saying "Windows has encountered a critical problem and will restart automatically in a minute." and internet does more either.
  Help!

  Hi, somehow I managed to fix my laptop using other answers I found on the forums and they were based on what you sent me here. I now have another problem with my laptop on internet access and an error message appears on my firewall is OK, but my University has a firewall up, so I think I need to go see them on this subject. Thanks for your help, thank you very much

• Re-install Windows Vista Service Pack 1

  Hello, I have recently reinstalled my Windows Vista Home Premium.  Now I am trying to re - install Windows Vista Service Pack 1.

  I had to download it because I couldn't get by a Windows Update.  When I tried to install the Service Pack, I received the following error message: Error Code: 0x8000FFFF.

  I want to upgrade to Windows 7, and then to 10 Windows but I don't think I'll be able to update without Windows Vista Service Pack 1 and 2.

  Can anyone give me any help will be greatly appreciated.

  Thank you.

  Rich

  I have been unable to install SP1 via windows updates but has been able to do it using the suggestions here:
  https://social.technet.Microsoft.com/forums/Windows/en-us/4120f8ff-ae6c-437f-A40D-8d48794d9841/services-Pack-1-for-Vista-Home-Premium-will-not-install?Forum=itprovistasp

  They include two tools running of Microsoft and then by installing SP1 downloaded in a boot environment. After finishing SP2, windows update has provided a new Windows Update Agent, which made it impossible to update. This is my 4th new installation disc from Dell, that started because of this same update to Windows Update Agent. I'm about to give up. If you try to install, I would set a restore point before doing so.

• Windows Update installed Windows Vista Service Pack 1 KB (936330) three times

  Although three times, Windows Vista Service Pack 1 has been installed, Windows Update still says it's an available update.  Information system does not indicate that it has been.

  What must I do to solve this problem?

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

• ERROR_NOT_FOUND (0 X 80070490) when you install Windows Vista Service Pack 2

  ERROR_NOT_FOUND (0 X 80070490)

  I tried and tried again to install Windows Vista Service Pack 2 x 64-bit system, but this error message keeps popping up. I tried to search for possible solutions, but they all tell me I have to use my Vista DVD. But there is a problem, I don't have it. I mean, that is, the gateway factory pre-installed Vista on my laptop, so I don't have the DVD. Is there anyone who can help me? THNX.

  Hi Jason,

  You can try the following solutions.

  Step 1: Download and install the system update readiness tool to run a single analysis for inconsistencies that may prevent successful installations of Windows Update.

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Step 2: Try to install Windows Vista Service Pack 2 now and see if it helps.

  Learn how to install Windows Vista Service Pack 2 (SP2)

  See also:

  Windows Update error 80070490

• I get error 80070490 Windows updates when you try to install Windows Vista service pack 2.

  error 8007090

  I keep getting the error 80070490 update of the window when you try to install windows vista service pack 2. help Windows and support suggested that I insert the windows dvd the disk drive but I don't have a disk with my computer. I chose automatic convenience store on the microsoft support site. but I still have the same problem

  Hello

  Are you sure this is the error Code?

  And not this one?

  It is the opinion of Microsoft about the error code 80070490.

  'You receive a "0 x 80070490" error code when you use Microsoft Update or Windows Update Web sites to install updates'

  http://support.Microsoft.com/kb/958044

  Method 1: run (Checksur.exe) system update readiness tool

  1. Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.

     For more information on how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base: 947821

     (http://support.microsoft.com/kb/947821/)

     Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  2. Try to install updates again.

  Method 2: perform a Windows repair installation

  If method 1 does not resolve this problem, you can perform a repair installation of Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2. Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD.

  If you do not have a DVD of Microsoft Vista, you will need to borrow a DVD of Vista Microsoft from a friend or work acquantance to do a repair upgrade Installation.

  "This has occurred as soon as I updated from Windows XP"

  You have the upgrade DVD?

  Here is a tutorial on how to do it:

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.