Cannot install Windows with BootCamp

Similar Questions

• Cannot install windows via bootcamp (Imac Mid 2011)

  Hi, I struggled for the last 2 days and can't seem to find how to create a windows partition and installed it.

  Note: I have a 27 inch mid 2011 Imac and run MacOS Sierra 10.12.

  I have problems with bootcamp especially at the stage of the process USB drive.

  1. I do not understand why Bootcamp assistant 2 display only tasks being #1 download the windows software and #2 install windows 10 when all apple support pages show 3 different tasks available as here https://support.apple.com/en-us/HT205016http ://

  

  2. I prefer to install windows 7 on my partition, bootcamp, however 'install windows 10', which means that I can't install an older version on my partition? I tried to install windows 7 via a win7 .iso file AND a win10 .iso but none of them works.

  3. whenever I try to install windows, the system do not recognize my USB (it would be with .iso win10 associated drivers or Win7 .iso. + drivers associated) and constantly asking for a disc to be inserted.

  

  My USB has been formatted through disk as MS-DOS (FAT32) volume and all utility used .iso comes from Microsoft. I don't understand why I can't have my. ISO recognized by the system.

  Help please :)

  Damien Kitsune wrote:

  1. I do not understand why Bootcamp assistant appear only the 2 tasks being #1 and #2 install windows 10 download windows software when apple support pages show 3 different tasks available as here https://support.apple.com/en-us/HT205016

  This is normal and expected behavior. Your 2011 Mac does not support the USB Windows installation. You must use a physical DVD burned ISO. Your Mac does not officially support Windows 10. The ISO files are available at https://www.microsoft.com/en-us/software-download/home .

  Documentation on Apple's site shows not all models. Please visit https://help.apple.com/bootcamp/mac/5.0/help/ for an older version (FC5).

• OSXRESERVED do not deleted after installing Windows with Bootcamp

  I installed Windows 8.1 and upgrade to Windows using Boot Camp 10.

  I think that the normal procedure for installation (instructions Apple) should be:

  -Boot Camp will partition the original HDD system to:

  -Partition OS x 'reduced '.

  -OSXRESERVED partition to save all the installation Windows 8.1 or CD ISO.

  -TRAINING camp of hard drive where the final installation of Windows will be.

  -Once installation is complete (it took about 5 hours!) so it should be reconfigured by boot camp would exist only two partitions:

  -Partition OS x 'reduced '.

  -BOOTCAMP with Windows OS HARD drive.

  But I still 3 partittions in my MAC PRO END of 2013: OSX, OSXRESERVED and BOOTCAMP.

  So now, when I boot my MAC PRO instead of see 2 possibilities of OS (OS x and WINDOWS) I see three possibilities (OSX, WINDOWS, and WINDOWS again), and the third possibility is wrong, it will show the original installation Boot CDROM instead of Windows 8.1

  I hope that I have explained clearly (...).

  Second part of the problem: I want to use VMWARE FUSION and configure it to use the Bootcamp partition as a virtual machine (YES, with the MERGER it is possible to use as virtual bootcamp, then you can start your Machine Windows within the MAC, or boot from the beginning). The problem is that the MERGER will detect the OSXRESERVED partition, but not the BOOTCAMP partition... So I can't get it to work until I have the first problem...

  Would you please be so kind as to help (I would like someone to really expert Apple could give a solution).

  Best regards

  Francesc

  1. you can remove OSXRESERVED manually using disk utility.

  2 VMWare seems unable to distinguish between the installer and install BC. Once you delete OSXRESERVED, it should work fine.

• Cannot install Windows on Bootcamp after replacing 3 TB FusionDrive with 1 TB SSD

  3 merger to drive has been replaced by 1 TB SSD drive. When reinstalling OS X I see that the 128 GB drive of Fusion is still available as a hard disk, which prevents me to install OS X or Windows (Bootcamp) on the SSD.

  I tried a few ways to install:

  1. OSX on SSD (recovery Internet Mode, delete all partitions and repartitioning, SSD)
     Installation fails when you try to install
  2. OSX on FusionDrive (128 GB), Bootcamp on SSD
     OSX installs fine, Bootcamp does not work. First time (10 Windows) I got an error message i/o failure and winload.exe, second time (8.1 Windows) a back message with 'failed to load the operating system, press CTRL + ALT + DELETE. That part a few times.
  3. OSX on FusionDrive (128 GB), Bootcamp on same drive
     Working, but limited to 128 GB for OSX and Bootcamp
  4. Make the logical Volume (fusiondrive) with 128 GB and 1 TB
     OSX works, but can not give more than 64 GB to my Bootcamp. Bootcamp to 64 GB ok.
  5. OSX on FusionDrive (128 GB), Bootcamp on FusionDrive - to SSD with Winclone
     8.1 clean Windows Installer, Sysprep. Everything looks ok in Winclone. When you try to reboot I get a message similar to "failed to load the operating system

  I would like to at least 800 GB on my Bootcamp. Does anyone know how to make this work?

  iMac late 2012, 1 TB Samsung EVO has replaced the 3 TB drive (installed to the authorized service partner Mac).

  After building the Fusion drive in step 4,

  1. the 128 GB drive was first in the volume of your CS?

  2 Let us try and correctly create the CS and see if we can make it work.

• Cannot install windows 7 on imac 27 mid2011

  Hello.

  I update mac OS x to the latest El captain;

  I want to install windows with boot camp in my mac i.

  I tried to install windows 8.1 without Bootcamp and after installing windows everything works but sound card does not work.

  After I search on this problem, I found that during the installation of windows EFI boot in I have mac sound card does not work. and that I should try it with boot camp.

  I use boot camp and insert my flash and after copying ISO file to my flash then I have mac restart; After that, I see the message: "cannot start; Insert the bootable media and press a key.

  Please help me. How can I install windows using boot camp?

  What year/model is your Mac?

• Cannot install Windows 7 on Envy 14-1211nr of HP recovery disc sent twice

  Cannot install Windows 7 on Envy 14-1211nr of HP recovery disc sent twice

  The Recovery Manager starts well. He correctly completed the following steps:
  1 format HDD

  2. copy the files from the CD to the drive. It copies all the 3 CD.

  Then he ask the driver (the 4th CD) CD. Once I have this CD, then after awhile I get messge below:

  Contact HP support

  In most cases, recover the hard disk will solve your problems.

  If your problem persists, you may have to contact HP support. Find details of support HO in the documentation of your PC.

  After that I see above meaage the only button I can click is "Finish". Once I click on finish, then in a minute, I get a message that "recovery completed successfully.

  The laptop restarts and displays the message on the screen "Bootmger" not found

  I called HP support and asked to run the hard drive and memory test and he succeeded.

  I can install windows on another CD I have with.

  But I can't install WIndows using the recovery CD, I received from HP. It's the 2nd CD series that I received these don't work or the other.

  I have two identical laptops. Tried installing on both and having the same problem on both.

  Can you please help with this.
  HP sends fake CDs?

  Kind regards

  Hello

  Here is another solution, you can try to see if you can get Windows 7 to install correctly.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create an installation disk yourself using another PC - just download the good Disk Image ( this must be the version exact same origin supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K

• Cannot install Windows updates (has no status) on the computer desktop and laptop

  Desktop               (Purchase date: 13/07/2010)

  Model: Pavilion p6402f or 6402f

  Product: BK275AA #ABL

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 1 64-bit

  Product ID: {removed privacy}

  Portable               (Purchase date: 14/07/2011)

  Model: Pavilion g6 Notebook PC

  Product: QD317UA #ABC

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 164-bit

  Product ID: {removed privacy}

  Description of the problem: same problem on the computer desktop and laptop at the same time began: cannot install Windows updates (has no status)

  No hardware changes or software recently made to the system: I followed the usual procedure to install Windows updates.

  Method of connection: wireless

  Technical expertise: intermediate level

  Performed troubleshooting: because the error # 80071 A 90 type indicated by the system, I followed the instructions of Windows Help and Support, for example to run Microsoft Fix it which did not work; a more advanced method has also been used, who recommended to start Windows Update in Mode safe, then open Windows Update and install the updates and then restart normally. At this point, the problem was that any stage of Windows Update was available.

  Hello amib004,

  As much as I know, only Windows Update cannot be run in safe mode. That being said, I saw where install several updates may conflict with each other. Try to disable all updates installation and install the updates failed one at a time.

• Cannot install Windows 7 Professional 64 bit on HP Envy 4-1053TX (AVL)

  1. product name and the number: HP Envy 4-1053TX (B9K16PA #UUF)

  Windows 2 operating system installed 7 Home Premium 64-bit

  3 error message/symptom: blue screen * STOP: 0x0000007B (0FxFFFFF880009A9928, 0xFFFFFFFFC0000034, 0 x 000.., 0 x 000...)

  4. all changes made to your system until the problem occurred pre-installed Windows 7 Home Premium, trying to get at operating system level to Windows 7 Professional 64-bit using free license.

  5 cannot install Windows 7 Professional 64 bit which is open license. No player appears when Windows DVD/USB boot. Tried to install when Windows is running, appear a blue screen upon restart.

  Hello

  I see that you have a problem in the installation of new Windows USB port. It seems that your HDD was not detected, right? It's because your laptop uses a SATA HDD.

  what you need to do are:

  1. download the driver AHCI SATA website of intel. (just google it)

  2. copy the files (size 700 KB for 6 files) into the new USB

  3. reboot and install your laptop with win 7 (dvd/usb)

  4. by the time win 7 installation reached the drive to install (none detected), click load drivers.

  5. now load your other USB SATA drivers.

  6. then will show all disks in your system.

  7. continue with the installation process.

  hope this helps.

• Cannot install windows update kb969947 error code 800F0816

  Cannot install windows update kb969947 (for vista) everytime I try after that restart the computer should go back to a previous restore point to operate

  error code 800F0816

  See the section "How to get help" of http://support.microsoft.com/kb/969947

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Or you can...

  Launch a collateral request for assistance free Windows Update:
  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  Consumer Security Support homepage
  https://consumersecuritysupport.Microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot install Windows XP because my disc is damaged and does not load.

  Try to reinstall Windows XP disc I have. Don't work so can't get computer to start

  I tried to reinstall Windows XP Service Pack 2 on my mom's computer.  I deleted the files with the help of brother-in-law, who said he had the drive. I did not know the security number the disk has been corrupted. Have since found the drive to MOM. Don't read that so can't get on computer. Trying to put it again so that she is away... will be back Saturday Panicking!

  Setup cannot find a previous version of windows installed on your computer.  To continue, Setup must verify that you qualify to use this upgrade product. Please insert the product windows CD is in the CD rom drive, and then press ENTER.  I have inserted a microsoft windows xp professional service pack 2, then this message: Setup could not read the CD you inserted, or the CD is not a CD of windows vald.

  Hello Sarah-JaneBenjamin
  The disk that you want to install Windows with is an upgrade. You need a complete product if you want to use the upgrade disk to install the operating system. That's why it asks you to verify that you have a calling to upgrade product. You said that you inserted a disc of Microsoft Windows XP Professional for validation, it's the same disc supplied your brother-in-law? You have already determined that the disc is damaged, so it does not work. Have you checked that the drive that you want to use is a complete operating system and not just a service pack disc? Also if you use the upgrade disk is not the equivalent of the disk that you use to check then the validation will fail also. If I had to guess I would say that you are using a service pack disk and that's why he will not be validated.
  In all cases, you must always a valid disc to re - install Windows. I suggest that you contact Packard Bell support and see if they can provide you with the media. The chances are slim that they will have it since it's Windows XP. If they don't you may want to check with 3 sites of third party for the purchase of Windows XP. Trying to divert from auction sites like most XP Media is questionable in their legitimacy.

• cannot install Windows Live ID Sign-in Assistant 6.5

  Hi, I have a problem with my games for windows is. When I try to run it, it requires to install cannot install Windows Live ID Sign-in Assistant 6.5. So I downloaded and run the installation. In the middle of it, it stops and begins to restore the facility. After that, it says installation "Windows Live ID Sign-in Assistant 6.5 ended prematurely". I have XP SP3. Home Edition

  Thanks for the reply

  Hi Michalcerny,

  I see that you have tried several measures that have been suggested. I suggest that go you directly to Windows Live technical support options for more specialized Forum.

  www.windowslivehelp.com

  I hope this helps.

  Eddie B.

• Error Microsoft FIXIT and cannot install Windows Media player

  Original title: microsoft solve this report: cannot install Windows Media Player 9 because the folder permissions used by W.M.Player need to be repaired. How can I do this?

  Windows xp pro, windows version - 5.1, arch / x 86 re

  Kostas,

  Thank you for the information required on this issue.
  
  Please provide the following information:
  
  Have you been able to solve the problem after following the methods?
  We would like to know the status of this problem now after following the proposed methods previously.
  We know with the results on this issue.

• Cannot install Windows XP update KB2718704; error # 0x800A138F

  Cannot install Windows XP update KB2718704; Get error # 0x800A138F. I would appreciate a mention of help on this issue. Thank you.

  (My Automatic Updates usually work, but this time not to go.) Updates are obtained through IE8 browser, but I prefer FireFox for daily use.)

  Thank you! Success!

  I used method 2, because I had already tried method 1 earlier, but the "fix it" went wrong. After reading the information from method 2, I opted to use my FireFox instead of IE8 browser, because I suspected that the process Internet Explorer that are included with the update was a large part of the cause of my problem. Among the options, I used Microsoft Download center to locate the update I needed and then through its validation and finally made the download and reboot. Voila!

  Can you please explain why the process more automated via IE did not work for me? Why I resorted to the labour process more that I used? Can I expect this of all the other "critical" updates that I get on my machine Windows XP Media Center Edition 2005? Maybe your answers would also be interesting to others.

• Cannot install Windows PowerShell 2.0 and WinRM 2.0, Code 80070020

  Cannot install Windows PowerShell 2.0 and WinRM 2.0 for Windows Vista for x 64-based Systems (KB968930) Code 80070020.  I tried to install the update on 16/04/2012 (which is as far as my story goes).  Other updates were installing.

  Thank you

  E-mail address is removed from the privacy *.

  Hello

  You are able to install some other updates?

  Follow these methods mentioned below and check.

  Method 1: Sometimes, third-party applications may conflict with the installation of the security update, you can perform a clean boot and check if that helps in the installation of these updates.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After troubleshooting, be sure to start your computer in normal mode, see step 7.

  Method 2:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-files

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

  http://support.Microsoft.com/kb/883825

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Try to install the update manually and check.

  32-bit - Windows PowerShell 2.0 and WinRM 2.0 for Windows Vista (KB968930)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=9864

  64 bit - Windows PowerShell 2.0 and WinRM 2.0 for Windows Vista for x 64-based systems (KB968930)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=9239

  For more information, see this article: problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Get the error code 641, cannot install Windows updates.

  Reluctant to do a reinstall of windows.  I had the same problem, find the same useless information on a cure.  I did a reinstall of windows (Vista) and partially by installing the updates of windows I ran into the same problem again, the windows installer does not.  Even from scratch will get not anywhere, leaving you at least your system as it stands leaves can be used instead of a partially updated with no program system.

  I wonder if Apple has this kind of problem?
  Split of: http://answers.microsoft.com/en-us/windows/forum/windows_7-system/get-error-code-641-cannot-install-windows-updates/c3f6c853-10e9-4585-b941-f960e02cf9a4

  Hello

  I suggest to reset the Windows Update components and check if it helps.

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us

  Let us know if it helps.