Cannot install Windows XP SP3

On a HP w / AMD processor that has recently had a clean reinstall, I can't upgrade to Service Pack 3. Whenever I have try it does not start with the exception of Safe Mode. If I try Windows Update I get error 0X8007043C. To a Web page, it said that I needed Framework 2.0 (I have ver 1.1). I found it, but the installation failed. Later, I found how to install the 4.0 Framework. Who installed correctly, but when I manually installed Service Pack 3, yet once I couldn't start. Had to restore SP2 again, third time.

Windows update no longer works if you do not have Windows XP SP3 installed, especially after a clean installation with a CD that has service pack 2 only. The installation CD most have xp sp2 so the best practice is to have XP SP3, copied to a USB drive before the reinstallation and as is the case with your system, it is advisable to have also the package upgrade for processors not intel record in thumb drive too. You're welcome and thank you for the comments.

Tags: Windows

Similar Questions

  • Cannot install Windows XP SP3 via download and CD

    Original title: "should reinsatll XP, I get to SP2, but when trying to install SP3 there will not, accomplish IEXPLORE. EX - Application error ".
    I have Win XP MCE with SP3 and IE8 installed on my Dell 5150, which occurred without fault until it crashed 5 weeks ago.


    I reinstalled the OS to SP2 but when I try to install SP3 it proceeds smoothly until the , when it hangs and stops the hard drive. It is with SP3 via download and the CD that I bought.
    CTRL, Alt & Del give the info    

    I re-installed IE8 twice, but it does not cure the problem.

    Suggestions, please?
    * original title - IE8 blocks SP3 *.

    Hello

    How do you try to download the SP3?


    Method 1:

    You can perform the clean boot, and then try to install the Windows XP service pack 3 and check:
    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353
    Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
    You try to install Windows XP service pack 3 with the help of the link and check:
    Overview of Windows XP Service Pack 3
    http://www.Microsoft.com/download/en/details.aspx?ID=10767

    Method 2:
    You can also check out the link to see how to install Windows XP SP3 on the computer.
    Learn how to install Windows XP Service Pack 3 (SP3)
    http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

    Also check out the links to learn more:
    How to troubleshoot an installation fails on Windows XP Service Pack 3
    http://support.Microsoft.com/kb/950718 steps to take before you install Windows XP Service Pack 3
    http://support.Microsoft.com/kb/950717

  • Cannot install Window XP SP3... now what?

    Not sure if I'm in the right forum. Having difficulties to install SP3. I have SP2 and went to Microsoft updates and tried to install it and got an error: cannot copy file Beethov9.wma.My tower was given to me so I have no idea what it is. What should I do next? Windows XP SP2 and IE 8 browser is my set up. Thank you. jneen420

    See this previous discussion: http://social.technet.microsoft.com/forums/en-US/itproxpsp/thread/351ca845-3df8-4c9f-b456-fbedf0abfa8a/

    ~~~~~~~~~~~~~~

    How to troubleshoot a failed installation of WinXP SP3
    http://support.Microsoft.com/kb/950718

    WinXP SP3 - read all the prerequisites for a successful installation
    http://msmvps.com/blogs/harrywaldron/archive/2008/05/08/Windows-XP-SP3-read-all-prerequisites-for-a-successful-installation.aspx

    Free installation and unlimited compatibility support for WinXP SP3 is available since April 14, 2008 to May 2009.  This support will cost U.S.$ 59 or by higher incident now.

    You can also see...

    About IE7 & IE8 and Windows XP Service Pack 3
    http://blogs.msdn.com/ie/archive/2008/05/05/IE-and-XPSP3.aspx

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Cannot install Windows XP SP3 - check encryption services

    original title: How can I check that my cryptographic service is turned on?

    I try to install Windows XP Service Pack 3

    Hello

    • Do you receive an error message during the installation of Windows XP Service Pack 3?

    You can check this link:
    You cannot install some programs or updates
    http://support.Microsoft.com/kb/822798

  • Satellite P300-1GN - cannot install Windows XP SP3

    Hi all!

    I bought the PC laptop Toshiba P300-1GN for a few weeks. Windows Vista is bad for this computer, but Windows 7 works like a Charm. But Windows 7 is not compatible with my programmers tools.

    On the Toshiba site, I saw the drivers for Windows XP. Tried to install Windows XP, but I got the blue screen with error 0x07b. In the PowerQuest Partition Manager both hard drives have error partition #702 (something like that number) but under Windows Vista and 7, drives are works fine without any errors.

    What seems, that's the problem? Drivers SATA Windows XP or something else with hard drives?

    Needs a very fast before going to Toshiba service desk information.

    Thanx.
    GNikolic.

    Hello!

    And why you can t install?
    You get an error message or something else?

    In my opinion that isn't a description of error so I can t help. If you want help you need to post more information.

    Good bye

  • Cannot install WIndows XP SP3 - wireless adapter does not work with any package of service beyond 2.0

    original title: wireless adapter does not work with any package of service beyond 2.0

    I have an AirLiink 101 wireless adapter.  Anyone know how to change the service pack 3.0 for me to update my Windows XP?   Can not install 3.1 without losing wireless connection.

    Thanks for any help.

    If you are on a wireless connection, try to switch to a wired connection and try the download with Internet Explorer.

    UTC/GMT is 06:49 on Wednesday, April 11, 2012

  • Error message "the website has encountered a problem and cannot display the page" when you try to install Windows XP SP3 update

    Original title: cannot use Windows Update to install Windows XP SP3

    I have done a complete reinstallation of Windows XP Pro from the original disc and managed to update to SP2.  However, when I tried to upgrade to SP3, I got an error that "the site has encountered a problem and cannot display the page.  I tried all the suggested fixes that I can find.

    During the last attempt, I discovered that several dll is missing.  Here's the msxml6.dll, wups2.dll, c:\windows\system32\wucltux.dll and c:\windows\system32\wuwebv.dll.  If they are critical, where can I find them, and how do I get support.

    In addition, mshtml.dll is available, but the DllRegisterServer could not find an entry point.  Is this critical?

    In any case, I still can I install Microsoft Update or download/install SP3.

    The computer is an IBM R50e laptop.

    Thanks for any help you can give.

    Try to run this tool to windows update. This will help to re-register the dll

    After its done. try again and do the update

    hope this helps

  • cannot install Windows Live ID Sign-in Assistant 6.5

    Hi, I have a problem with my games for windows is. When I try to run it, it requires to install cannot install Windows Live ID Sign-in Assistant 6.5. So I downloaded and run the installation. In the middle of it, it stops and begins to restore the facility. After that, it says installation "Windows Live ID Sign-in Assistant 6.5 ended prematurely". I have XP SP3. Home Edition

    Thanks for the reply

    Hi Michalcerny,

    I see that you have tried several measures that have been suggested. I suggest that go you directly to Windows Live technical support options for more specialized Forum.

    www.windowslivehelp.com

    I hope this helps.

    Eddie B.

  • Cannot install Windows XP update KB2572073 and KB2539631

    Original title: (KB2572073) and KB2539631

    After the automatic update, I received these two errors which could not be installed.   A security update for the Microsoft.NET Framework 2.0 SP2 on Windows server 2003 and Windows XP x 86 (KB2572073)

    Update of security for Microsoft.net Framowrk 2.0 SP2 on Windows server 2003 and Windows XP x 86 (KB2539631)

    I was unable to find the instructions for updating this.  Thanks for your help.

    Hello

    Follow the steps in troubleshooting this article and check if that helps.

    You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or

    http://support.Microsoft.com/kb/943144

    See also:

    How to manually remove and then reinstall.NET Framework 2.0

    http://support.Microsoft.com/kb/908077

  • Cannot install Windows Update - Package Version: 4.0.2.20110411

    Original title: Package Version: 4.0.2.20110411

    Where I can download the Version of the Package: 4.0.2.20110411 to correct the problem of automatic update?  This response should not be that big of a problem, but this download appears to be hidden from the view and Microsoft IS aware of this problem.  Help, please!

    Microsoft Fixit diagnosis points to the Package Version: 4.0.2.20110411 download and installation as a fix for this problem.

    Hello

    Try the methods provided below and check if the problem persists.

    Method 1:

    You can try to reset Windows Update components that could help solve the issue of the updates of Windows.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058/en-us

    Note:

    To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    How to back up and restore the registry in Windows

    http://support.Microsoft.com/kb/322756

    Method 2:

    Download and install the Windows Update Agent from the link provided below.

    You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or

    http://support.Microsoft.com/kb/943144

  • Cannot download windows XP SP3 error 0 x 80244018. How should I do? Ousseni Pal (_ @_. _)

    Cannot download windows XP SP3 error 0 x 80244018. How should I do? Ousseni Pal (* address email is removed from the privacy *)

    I tried this time also it could not be installed and the error code is 0x80004005.

    Please notify.

    Hi ousseni,.

    See the following article to find out how to install Windows XP Service Pack 3.

    Steps to take before you install Windows XP Service Pack 3

    See also:

    How to troubleshoot an installation fails on Windows XP Service Pack 3

  • Cannot install Windows 7 on Envy 14-1211nr of HP recovery disc sent twice

    Cannot install Windows 7 on Envy 14-1211nr of HP recovery disc sent twice

    The Recovery Manager starts well. He correctly completed the following steps:
    1 format HDD

    2. copy the files from the CD to the drive. It copies all the 3 CD.

    Then he ask the driver (the 4th CD) CD. Once I have this CD, then after awhile I get messge below:

    Contact HP support

    In most cases, recover the hard disk will solve your problems.

    If your problem persists, you may have to contact HP support. Find details of support HO in the documentation of your PC.

    After that I see above meaage the only button I can click is "Finish". Once I click on finish, then in a minute, I get a message that "recovery completed successfully.

    The laptop restarts and displays the message on the screen "Bootmger" not found

    I called HP support and asked to run the hard drive and memory test and he succeeded.

    I can install windows on another CD I have with.

    But I can't install WIndows using the recovery CD, I received from HP. It's the 2nd CD series that I received these don't work or the other.

    I have two identical laptops. Tried installing on both and having the same problem on both.

    Can you please help with this.
    HP sends fake CDs?

    Kind regards

    Hello

    Here is another solution, you can try to see if you can get Windows 7 to install correctly.

    Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

    An example of a COA label can be seen here.

    You can create an installation disk yourself using another PC - just download the good Disk Image ( this must be the version exact same origin supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

    Windows 7 sp1-iso-official-32-bit-and-64-bit

    Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

    http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

    All pilots additional and the software, you may need can be found here.

    Kind regards

    DP - K

  • Cannot install Windows updates (has no status) on the computer desktop and laptop

    Desktop               (Purchase date: 13/07/2010)

    Model: Pavilion p6402f or 6402f

    Product: BK275AA #ABL

    Serial No.: {removed privacy}

    OS: Windows 7 Home Premium Service Pack 1 64-bit

    Product ID: {removed privacy}

    Portable               (Purchase date: 14/07/2011)

    Model: Pavilion g6 Notebook PC

    Product: QD317UA #ABC

    Serial No.: {removed privacy}

    OS: Windows 7 Home Premium Service Pack 164-bit

    Product ID: {removed privacy}

    Description of the problem: same problem on the computer desktop and laptop at the same time began: cannot install Windows updates (has no status)

    No hardware changes or software recently made to the system: I followed the usual procedure to install Windows updates.

    Method of connection: wireless

    Technical expertise: intermediate level

    Performed troubleshooting: because the error # 80071 A 90 type indicated by the system, I followed the instructions of Windows Help and Support, for example to run Microsoft Fix it which did not work; a more advanced method has also been used, who recommended to start Windows Update in Mode safe, then open Windows Update and install the updates and then restart normally. At this point, the problem was that any stage of Windows Update was available.

    Hello amib004,

    As much as I know, only Windows Update cannot be run in safe mode. That being said, I saw where install several updates may conflict with each other. Try to disable all updates installation and install the updates failed one at a time.

  • Cannot install windows XP on the Satellite Pro A200-1N2

    Jin

    I have a Toshiba Satellite A200 - 1N2 PSAE3E and I don't want Vista on my laptop. I downgraded the bios to V5.30 but still cannot install windows xp and there is still no optin for SATA in the bios.

    Can someone help me?

    Thank you.

    Hello

    Did you install the SATA drivers first?
    You need this driver to recognize the HARD drive!

    You must download the Intel Matrix Storage Manager. You should find it on the page of the Toshiba driver or the Intel Web site.

    You must perform the installation of an external USB FDD drive using the F6 key during the installation of Win XP.

  • ThinkPad R60 cannot install Windows XP After erasing the HARD drive using the lenovo diagnostic utility

    WinXP pro Setup cannot find that any installed HARD disk so cannot install windows. Unfortunately after many attempts to use rescue and recovery to restore the factory settings and for some reason constantly default... After leaving another utility popped up giving me the opportunity to erase the HARD drive and so I did... After fact as well and all I had was a blank screen, no windows more or no matter what utility to reinstall windows, then I used my winxp pro installation CD, but the program installation would continue not after a certain point by saying that the installation did not find any HARD disk installed. followed by "ensure that any disk HARD r turned on and correctly connected, and that no matter what material associated drive configured correctly, this may involve running a manufacturer provided diagnostic or Setup program. Clearly it took me by surprise. What was supposed to be a cut to white erase and reinstall now me baffled and angry. Formats the HDD of the solution? If so why didn't not the usefulness of lenovo do... If not, what is the problem? Someone help pls

    Welcome to the forum!

    Go into the BIOS (F1 at startup), set the "compatible" SATA mode (NO AHCI), then press F10 to save and exit, and you should be all set.

    Good luck.

Maybe you are looking for