Cannot install Windows XP update KB2572073 and KB2539631

Similar Questions

• Cannot install Windows XP update KB2718704; error # 0x800A138F

  Cannot install Windows XP update KB2718704; Get error # 0x800A138F. I would appreciate a mention of help on this issue. Thank you.

  (My Automatic Updates usually work, but this time not to go.) Updates are obtained through IE8 browser, but I prefer FireFox for daily use.)

  Thank you! Success!

  I used method 2, because I had already tried method 1 earlier, but the "fix it" went wrong. After reading the information from method 2, I opted to use my FireFox instead of IE8 browser, because I suspected that the process Internet Explorer that are included with the update was a large part of the cause of my problem. Among the options, I used Microsoft Download center to locate the update I needed and then through its validation and finally made the download and reboot. Voila!

  Can you please explain why the process more automated via IE did not work for me? Why I resorted to the labour process more that I used? Can I expect this of all the other "critical" updates that I get on my machine Windows XP Media Center Edition 2005? Maybe your answers would also be interesting to others.

• Cannot install Windows PowerShell 2.0 and WinRM 2.0, Code 80070020

  Cannot install Windows PowerShell 2.0 and WinRM 2.0 for Windows Vista for x 64-based Systems (KB968930) Code 80070020.  I tried to install the update on 16/04/2012 (which is as far as my story goes).  Other updates were installing.

  Thank you

  E-mail address is removed from the privacy *.

  Hello

  You are able to install some other updates?

  Follow these methods mentioned below and check.

  Method 1: Sometimes, third-party applications may conflict with the installation of the security update, you can perform a clean boot and check if that helps in the installation of these updates.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After troubleshooting, be sure to start your computer in normal mode, see step 7.

  Method 2:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-files

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

  http://support.Microsoft.com/kb/883825

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Try to install the update manually and check.

  32-bit - Windows PowerShell 2.0 and WinRM 2.0 for Windows Vista (KB968930)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=9864

  64 bit - Windows PowerShell 2.0 and WinRM 2.0 for Windows Vista for x 64-based systems (KB968930)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=9239

  For more information, see this article: problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Error Code 80604004 cannot install Windows security update KB 2296199

  Already tried "Microsoft Fix It" but no problems have been detected

  Hello

  1. what Microsoft 'Fix it' has been run on your machine?

  Follow the steps below and check, if it helps.

  Step 1:
  
  Disable all security software and try to install the updates.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2:

  Follow the steps in the article below and check if it can help solve the problem.

  You cannot install some programs or updates

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Cannot install Windows PLUS updates. -Modules Windows Installer has stopped working...

  original title: cannot install MORE Windows updates.

  Greetings, people. My computer will download, but not install many of the windows updated.

  I think it's because of 'message "Windows Modules Installer has stopped working and was closed". Is this correct?

  Can I fix it myself? Thank you, Bob

  Hello

  try looking here's FixIt pro windows update:

  http://support.Microsoft.com/kb/971058/en

  LC

• Cannot install Windows Vista updated system preparation tool

  I downloaded the update for Vista 32 bit system preparation tool, but when the program tries to install after initialization, the installation progress bar never appears, the installation seems to just "hang" and do nothing.  I tried to cancel the installation, but the program seems stuck, I use the Task Manager to cancel the installation.  I wonder why the tool cannot install on my PC after downloading.

  Hi mlzla,

  I hope you do well.

  No, if you do an upgrade on the spot, you will lose any program. The on-site upgrade process will take around an hour or two. It is very useful.

  I hope this information is useful.

  Concerning
  Rehman - Microsoft Support

• Cannot install Windows XP updates after you perform a system recovery

  Original title: after recovery

  try to update xp from a recovery.  Malware bad fake virus alert program computer stopped altogether recovered but much udates microsoft I downloaded previously will not reload.
  Trying to get net.3.5 to work does not

  Hi prcrimm,

  1. do you get error messages or error codes?

  Step 1:

  You can read the following article and try to reset the Windows Update components and check if it helps.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Step 2:

  If you are facing problems with the updates of the .net framework, then see the link below and try the advice given and then reinstall all the versions of the .NET Framework on the computer.

  http://support.Microsoft.com/kb/923100

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot install Windows 8 update for Intel 965 Express Chipset

  Updated - update the driver Intel Corporation for Mobile Intel (r) 965 Express Chipset Family (Microsoft Corporation - WDDM 1.1) moved.

  Displays error:
  Some updates have not been installed.
  Failed: 1 update
  Errors found: Code 80070002

  Current driver Info:
  Driver date: 23/09/2009
  Driver version: 8.15.10.1930

  System information:
  Edition: Windows 8 Pro with Media Center
  Type: 32-bit performance, x 64 processor

  Had the same problem.

  Just go to C:\Windows\SoftwareDistribution\Download\Install (may be different, just check where the drivers have been downloaded)
  Right-click on igdlh.inf and select install,
  worked for me :)

• Cannot install windows 7 update error 8007064A code kb2289158!

  have tried to install this update for Age, still get the same error, tried to manually download downloads of MS, but get msg "detection failed, this may be due to a corrupted installation database", what is average, ideas, little user profane.  When there is a lot of updates installed on 'closed', 'start-up' sometimes I get a blue screen and sometimes have to restore, again the new.  my laptop is a sony vaio and they asked me to make a full recovery. what I think is a little extreme! all conventional wisdom greatly.

  See the section "How to get help" of http://support.microsoft.com/kb/2289158

  For individuals, please visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  1. open IE 32-bit (only) to https://consumersecuritysupport.microsoft.com/

  2. click on security updates aren't installed properly

  3. on the resulting page, click CONTINUE

  4. Select an appropriate country and language, and then click CONTINUE

• Cannot install Windows PowerShell 2.0 and WinRM 2.0 for Windows Vista for x 64-based systems (KB968930) when I am with Vista x 64 SP2

  Installer provides "the update does not apply to your system".

  Same response from the x 86 Installer.

  My error - tried to update something that was already

• Problem Windows Installer six updates, KB2572073, KB2518864, KB2539631, KB2418241, KB979909 and KB982168.

  Windows Update continues to not settle six updates, KB2572073, KB2518864, KB2539631, KB2418241, KB979909 and KB982168.  Every time, when I turn off, these same six updates appear to be installed.  The routine runs showing that each update has been installed. I don't get the error messages.  It seems that every time that updates are installed correctly, but the next time I turn it off, the six are to be installed again and again.  Can someone help me?  This problem is surface the last part of the month of October, and I have not found a way to overcome the problem.

  If you have run this tool: http://support.microsoft.com/kb/947821 and looked at the generated log to see if there is a specific corrupt file?

• Cannot install Windows updates (has no status) on the computer desktop and laptop

  Desktop               (Purchase date: 13/07/2010)

  Model: Pavilion p6402f or 6402f

  Product: BK275AA #ABL

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 1 64-bit

  Product ID: {removed privacy}

  Portable               (Purchase date: 14/07/2011)

  Model: Pavilion g6 Notebook PC

  Product: QD317UA #ABC

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 164-bit

  Product ID: {removed privacy}

  Description of the problem: same problem on the computer desktop and laptop at the same time began: cannot install Windows updates (has no status)

  No hardware changes or software recently made to the system: I followed the usual procedure to install Windows updates.

  Method of connection: wireless

  Technical expertise: intermediate level

  Performed troubleshooting: because the error # 80071 A 90 type indicated by the system, I followed the instructions of Windows Help and Support, for example to run Microsoft Fix it which did not work; a more advanced method has also been used, who recommended to start Windows Update in Mode safe, then open Windows Update and install the updates and then restart normally. At this point, the problem was that any stage of Windows Update was available.

  Hello amib004,

  As much as I know, only Windows Update cannot be run in safe mode. That being said, I saw where install several updates may conflict with each other. Try to disable all updates installation and install the updates failed one at a time.

• Cannot install windows updates and also msconfig, regedit, Task Manager won't open?

  Hello

  I use windows xp professional sp3.

  Nothing happens when I try to run msconfig, regedit, Task Manager, etc.. They don't open even in Safe Mode.

  Apart from that, windows update is not able to install updates and repeatedly tries to install the same updates again and again and fails permanently.

  Sometimes, when I try to run some .exe files, I get an error message... 'not a win32 application valid', even if its a win32 version.

  The boot.ini file is missing. I've already replaced the missing hosts files.

  Could someone help me please?

  Concerning

  ND

  Hello ndastolwala,

  In addition to the entrance of Allen Howard, you can also try a repair installation.  I have included the link below and hope that this can help out you.

  Repair the Windows XP installation:

  http://support.Microsoft.com/kb/917964

  Thank you

  James

• Cannot install Windows Update (error: 0x8024D007)

  OK, I go here:

  http://www.update.Microsoft.com/microsoftupdate/v6/default.aspx?ln=en-us

  and get this:

  "Update Windows to work with this Web site
  To continue, you must first download and install the latest version of some windows updating software that is designed to work with the site. »

  with a button below that says "Windows Update". I click the button.

  Then he said: "download and install the latest updated software" and it counts up to 100% says "Download", then increased to 100% & says "register". Then, I get this:

  [Error number: 0x8024D007]
  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.
  For self-help options:

  I tried the fixes on these pages and neither worked:

  http://support.Microsoft.com/kb/949104/

  http://support.Microsoft.com/kb/956701

  Help, please!

  The computer belongs to my employer.

  Please contact your IT department or your system administrator.

  Microsoft offers support without charge for problems of this kind, but only for users.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot install Windows update - error 8007003 - updated fails repeatedley

  Cannot install Windows update - error 8007003 occurs whenever I try to update

  Would have been nice if you included the Windows operating system you are using, but nevertheless (pick that applies to you).

  Windows XP

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
  http://support.Microsoft.com/kb/910336

  When you search for available updates on the update site, you see the Error 80070002 0 x or 0 x 80070003
  http://update.Microsoft.com/windowsupdate/v6/showarticle.aspx?articleid=17&LN=EN&IsMu=false

  Error message when you try to download the updates on the Microsoft Windows Update Web site or from the Microsoft Update on a Windows XP computer's Web site: "0 x 80070003".
  http://support.Microsoft.com/kb/916248

  Vista

  Windows Update error 80070003
  http://windowshelp.Microsoft.com/Windows/en-us/help/dc8636cd-4742-4e4e-B07C-a8cc9c684b261033.mspx

  Description of the update of the system for Windows Vista tool
  http://support.Microsoft.com/kb/947821
  0 X 80070002 ERROR_FILE_NOT_FOUND

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
  http://support.Microsoft.com/kb/910336

  Error message when you try to download updates from Windows Update on a computer that is running Windows Vista: "error 0 x 80070003 the system cannot find the path specified."
  http://support.Microsoft.com/kb/942967

  And here's one for Windows 7

  Windows Update error 80070003
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80070003

  TaurArian [MVP] 2005-2010 - Update Services