Cannot install Wireless Adapter (card NETWORK or USB key) to the Pavilion p6340a Win 7 Home Prem

Similar Questions

• my computer not have an installed wireless adapter can't I buy an I a home hub and can not use it please help

  Please help... I tried to connect my computer to my BT homehub but can't... my computer does not have an installed wireless adapter and I want to know if I can buy one or what else can I do... coming exams and need my computer... Help, please!

  Your BT Home Hub came with a yellow Ethernet cable - you should have a plug Ethernet on your PC.

  Just follow the instructions with the hub to connect.

• Problems when I want to update my complete system Mavericks using a USB key with the installation program.

  I want to "Refresh" my Mavericks home cleaning system and I still have a USB key with the complete installation program.

  With this USB key, I installed successfully already before Mavericks. Now, I want to repeat the installation by booting from USB key. But when the installation starts early an alert appears, said something like "... the verification failed - something is changed on the volume...". "and the cant of the installation continues.

  I've archived the original "OS X Mavericks installieren.app" from the app store and I have properly prepared another USB key using the terminal app, referencing the original installer, but I still get this alert when I try to install with this new USB.

  It is necessary for me to work with the Mavericks, because it's the latest version of the system on which I can run Adobe Creative Suite CS6 correctly. With the later versions of OS X, I get problems on my Mac Pro (end of 2008).

  I wonder what could happen with my first USB data, as I have already installed Mavericks successfully with it under the same conditions and after that he never touched the stick again so far. What can I do? What is the reason for this? Y at - there a site where I can get help or advice to solve the problem or if necessary can I re-download an Installer 'fresh '?

  Thank you and what is Berlin

  You can make a bootable USB to install using this free program that will do all the work for you. Try running disk utility/repair disk be before installation.

  Bootable USB Flash Drive-Diskmaker X

• I get startup repair screen when I try to boot my laptop from dell inspirion windows 7, I run the scan and detects any errors. When I ran repair usb key received the error 0x400110020000100A

  I get startup repair screen when I try to boot my laptop Dell Inspiron windows 7, I run the scan and detects any errors. So, I tried to use a USB repair for a laptop Dell Latitude Windows 7 pro and I still can't the computer to start. Tried to restore to the factory settings, can not. I have no image, backups, all missing, restore points?

  After that I tried to launch the USB repair I got 0x400110020000100A error code and I received error (0x8007027E) indicating the device will not start without a reboot.

  Anyone know how to fix this?

  Any advice would be greatly appreciated. I'm not computer illiterate, but am not pro either. Just use them not program them or even understand all languages!

  ____________________________________________________________________________________________________________

  Dell Inspiron laptop about 4-5 years.

  Running windows 7 Home Edition.

  Does not start little matter what I tried.

  If I remember correctly, I looked in MS-DOS mode and noticed that it said something like "x: win...» "that seemed strange to me because I thought that it should say"c: victory... "but as I said I am not a computer wiz so if anyone can help me, I would appreciate it.

  I'm about to rip the hair off my head with my laptop. My latitude was blue planned, surprisingly I fixed it (don't ask how, you couldn't tell). Then my dell inspiron would not start right after my dell latitude fell out of my truck and landed on the sidewalk, wanted to kill the person, the screen is broken. I can use it but it is very difficult, see a mosquito net and not perfectly clear, works well. lol someone knows somewhere or that would install a new screen for a reasonable price? I live in the Boston area.

  Back to the laptop won't start not, when I ran repair USB key received the error 0x400110020000100A

  Hello

  Thank you for the update on the issue. I appreciate your time and effort in resolving this issue.

  You can try the following methods and check if it helps.

  Method 1:

  You can use the Bootrec.exe tool in the Windows recovery environment (Windows RE) to troubleshoot and repair the following items in Windows Vista or Windows 7:

  • A master boot record (MBR)
  • A boot sector
  • A Boot Configuration data (BCD) store

  Note: When you are troubleshooting startup issues by using the Windows RE, you should first try the Startup Repair option in the System Recovery Options dialog box. If the Startup Repair option does not resolve the problem, or if you must troubleshoot more steps manually, use the Bootrec.exe

  Use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  If the problem persists, proceed to method 2.

  Method 2:

  Please follow these steps:

  1. Tool command prompt open in the mode of the Windows recovery environment .
  2. You will see X:\Sources
  3. Type chkdsk c:\ at the flashing prompt to launch the utility Chkdsk. replace c:\ with the letter of the drive that you want to run the Chkdsk utility. If the hard drive is d:\, then type that instead.
  4. After the "chkdsk c:\. "insert \f command to fix errors on the disk volume or the \r to recover bad sectors and then press ENTER.
  5. Restart the computer once the chkdsk command has completed.

  Note: Running chkdsk on the drive if bad sectors are found on the hard drive, it attempts to repair this sector, if all available on which data may be lost.

  For more information: Please refer to the section of the additional If you can not boot into Windows at all stages in the following link.

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-in/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• HP workspace: can users save files directly on their Elite x 3 HP or on a USB key using the workspace?

  Hey everybody,

  Can users save files directly on their Elite x 3 HP or on a USB key using the workspace?

  Thank you

  Bill

  Yes. Users can save files between workspace of HP and the HP Elite x 3 device or on a USB key.

• Envy 15 t: using a USB key as the recovery media

  The instructions of assistant decision-making support, that the thumbdrive are not compatible with Windows 8 ?

  The computer is a computer of Windows 8 (actually the 8.1).  Recovery files would be (probably) 8.1 recovery of files.

  However, it seems that the recovery thumbdrive must be compatible?

  What I don't understand? ..... Izzy

  Hi @Izzy11201 ,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your TouchSmart from HP ENVY 15 laptop and issues using a USB key as the recovery media.

  I think that the laptop it tell you that the Thumbdrive could not be formatted for all functions of Windows 8. It doesn't have to be 32 GB and is compatible to Windows 8 to create a recovery USB Flash disk. Here is a link to the creation of recovery disks or USB in Windows 8 flash player, if you need it.

  I hope this helps.

  Thank you.

• Cannot install HP Deskjet 3050 a using USB or wireless.

  I tried to install a printer HP Deskjet 3050 a on my computer recently.

  After inserting the CD her usually install page appears. When I choose to install the printer through the USB port, the program continues normally until it beginning to insert the USB cable.

  Having said the computer software does not meet attaching me the USB cable, just on the same window.

  When you try to install the computer over the network, it starts to check the network environment and will then pass the same window as before, indicating that I need to insert the USB cable.

  My USB ports work correctly, but the computer address to find the printer.

  I have a Dell Inspron 530 with Windows Vista Home Premium 32-bit.

  Hi Silvuss,

  I would suspect im a defective USB causes such behavior, such as cable used to direct connect also although it is used to establish the wireless connection.

  Please make sure that the USB port was not plugged launcing before installation, enter the control panel > printers and ensure there is no Deskjet 3050 a icon exists. If there is such a, delete it by clicking on the icon, and restart the PC, then try following the installation again.

  In addition, make sure that the USB port is not longer than 2 - 3 m long, directly plugged on the ports of the PC and not through USB hub or extension that will reduce its power.

  I also suggest that you try another cable and see if that can help you.

  A last suggestion, make sure that the CD and Printers lists the exact model as it must contain eighter HP Deskjet 3050 has or J611, make sure that there is no difference that its previous model have a similar name (Deskjet 3050 J610).

  Hope that helps,

  Shlomi

• Cannot install wireless driver for Satellite A40

  A few days ago I had to reinstall the OS windows (XP) on my laptop. Since then, I'm not able to get a WiFi connection. I tried to install the driver on the CD that was in the package, I got when I plug the laptop, but the installation failed. I am able to get internet with a LAN cable, however, the only type of access provided in the College, I screw is wireless, so I really want to make it work again.

  There is no option for a wireless connection when I click on "create a new internet connection". However, through the program "ConfigFree" (included in the installation package) I know that my wireless adapter cannot "see" the wireless network. In addition, when I click on "view available wireless connection" icon of the internet wireless next to the time, it shows nothing.

  Really, I don't know how to run again and would be pleased if someone can help me.

  Kind regards
  Katerina

  Hello

  I'm a little confused about the description of your problem full of m.
  First of all, it would be very interesting to know if you have used the WLan in the past!
  Did you use WLan on this laptop?

  I searched a little on the net and didn't find any A40 with the installed wireless card!
  Please check under network adapters Device Manager if a wireless network card or an unknown device appears.

  If it s not available under network adapters, then your laptop was not equipped with the LAN card internal minPCI!

• Cannot install Wireless driver for Wifi

  * Original title: Wireless completely missing driver

  I have a Toshiba Satellite L650 PSK1JA-0FN017, and recently he stopped to connect to a wi - fi connection. I checked the network adapters in the Device Manager and it lists only Atheros AR8152 PCI - E Fast Ethernet Controller. Ethernet works fine and seems the only way I can connect.
  When I press Fn + F8 nothing happens (probably coz there is nothing to work on), but when I press the Fn, invented flash cards and the shortcut keys work for all other functions. I tried a system restore, recovery of hard drive, and nothing helps, it still does not work.
  During the hard drive recovery process, I saw that he was installing Broadcom, Atheros Wireless Lan Intel AND drivers. I went on the site of Toshiba and re-installed all the wireless drivers, but nothing happens. I also tried updating my BIOS but that did nothing either. Because the wireless driver is missing, I don't know what specific driver, actually, I need to install so I tried lot but they did not work.
  In addition, during the recovery process, I have 4 recovery disks, but it only used the first one as he did not invite me to insert other... Maybe that's where I was wrong? I also installed a Toshiba value pack...
  Oh, I'm also running on Windows 7 64 bit

  Any help would be much appreciated. Thanks in advance. Even if you think of doing the things I've already mentioned, I'll try again.

  Hello

  -Have there been recent changes made on the computer before the show?

  Please follow the steps below and we update with the results.

  Method 1: Please try following the steps provided in the article and check out them.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  I suggest you to choose the appropriate model and download the drivers from the following link and check.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  If the drivers are not available, then contact Toshiba support for assistance.

  http://forums.Toshiba.com/

  For more information, see the links:

  Update drivers: recommended links.

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Let us know if it helps!

• Desire X 2 g000: cannot install wireless driver on HP Envy X 2 g000

  I tried to reset the PC (frankly it waas behave very irregularly, constant breaks down, mouse pointer disappears etc.) and the windows utility to do this. At the end a BACK screen style was asked to use the flight / flight keys pressed to decide whether to wipe completely or not. I chose to erase completely.

  So I got a PC without an OS, that is not what I expectwed when I chose to reset completely.

  I downloaded Win 8 create a key to start on another machine and have now reinstalled windows.

  I have found most of the drivers for the keyboard, mouse etc. to the HP wesbsite.

  I'm unable to install Sp64212 which is the driver for the wireless network. When I run it I get an error setup.exe has failed.

  Wireless, I can't complete installation, so I can't use all the HP utilities there to address because they expect to the internet.

  How can I install the driver for the WiFi works?

  Hello:

  I used 7 - zip to explore the driver folder and all the drivers are there.

  So, see if it works...

  Download and install this free utility for files.  You want the first file listed for 32 bit.

  http://www.7-zip.org/

  Download and save sp64212.  Do not run it.

  Having done both, right click on sp64212 and select 7 - Zip from the list.

  Have 7-Zip extract of: and let it extract the files in the sp64212 folder.

  Once you have done this, go to the Device Manager and click the device 'Network controller' who need drivers.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the sp64212 that 7-zip driver folder created.

  Make sure that the include subfolders is selected, and the driver should install.

• Cannot install my hp l7590 printer my printer connected to the network via another computer

  I have win 7 computer and the printer attached to the xp computer

  When I click on add a printer, I can see the printer but when I try to install it

  Windows says it can't find the driver in the network after watching it in windows update

  I tried to find it manually in the directory of the software for the printer hp, but I don't know which

  Using INF file

  If anyone can help me

  I will appriceciate it.

  in amir thanks

  Hi amir40,

  You have a more intermittent connection if you connect the printer to your router and then install the printer on computers using the network. Here is a document on how to connect the printer to your router.

  http://support.HP.com/us-en/document/c02279915

  If you want to continue with the print share. See the following document below.

  http://search.Microsoft.com/en-us/results.aspx?q=printer+sharing+USB

• Pavilion db6 notebook wireless adapter/card has no

  Hello

  I use a laptop HP Pavilion db6 with operating system Windows 7 Home premium. I've never had a problem with my wireless internet up to this morning, when the wireless adapter has a Red Cross and a message that no connection is available. I lived the routines installation and activation of the wireless adapter, but nothing works. I don't know how the computer is organized, but it seems as if the wireless card if there is one, has failed. It can be replaced? If Yes, what is the right name for the map? In case you're wondering, I am currently using another computer but I hope for a quick response to my post that I can not use it all the time.

  Waiting thank you very much.

  Hi Petrox,

  Yes, it can be replaced, this is nice video how hd and card access wireless.

  http://www.YouTube.com/watch?v=ZXYdSFu2xrU

  Wish you good luck!

  <>
  * Click on the star of CONGRATULATIONS on the left say "thank you."
  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

• Photosmart 7960 installed via the USB port on the PC under Win XP Pro acting as a print server

  I have a PC running Windows XP Pro, which acts as the home network file and print server.   The Photosmart 7960 is connected to this computer via a USB cable and configured to be "shared".   When I go to "Add a printer" on another PC, in Windows 7, which is also part of the same network, I can navigate to the 7960 correct, but the installation wizard is unable to find the driver for Win 7.  I still have what in the HP see basic documents that tells me how to add this shared printer on my Win 7 PC.  Looking at the support page drivers I saw that Windows 7 already has the driver.  True, but the only way, it seems that I can get to it is to connect the printer directly to Win 7 PC via a USB cable.   Any suggestions?

  Apparently, the solution is as follows.  First connect the photosmart 7960 directly to the PC running Windows 7 via USB cable network.  It will be auto-install drivers.  Reconnect the printer to the PC under XP pro server.   From the PC running Windows 7 where you have installed the printer via USB, you can go ahead and remove the photosmart 7960 from the list of printers; This will not remove the just downloaded drivers.  Next, select Add a printer, and then select 'Add a local printer' (no network).  Select 'Create New Port' and click Next.  In the next dialog box, type the name of the host server and the name of the printer.  In my case, it's \\mainserver\HP photosmart 7960. Click Next.   In the "Install the printer driver" dialog, click "Hewlett Packard" and find the 7960 in the printer list and click Next.  I was able to successfully install the printer this way.

• am running windows vista on dell inspiron1501laptop.installed new hard drive and ports usb recognize when the new device is plugged, but impossible to find / or install the drivers

  Recently, I replaced my drive hard because kept pc quit unexpectedly.
  am running windows vista 32 bit. on a dell inspiron 1501 laptop. Since the departure of
  the hard drive, when I try to use my SD card reader or usb ports, my pc recognize
  a device has been plugged in but can not locate or install the necessary drivers.

  You reinstall your drivers? Go to Device Manager and check your devices for problems. Usually with yellow and red symbols.

  Dell support
  http://support.Dell.com/support/index.aspx?c=us&CS=19&l=en&s=DHS
  Click on drivers and downloads

  Enter your Service tag or select your model

• HyperBowl will not start in XP SP3 / cannot install Windows update KB924867 (service pack is newer than the update...)

  original title: hyperbowl will not start in XP SP3 / cannot install KB924867

  Hello

  I just reinstalled windows XP and done all the updates. I then reinstalled hyperbowl 3d and it will not open up. Now it used to be that if you ran the update:

  Update for Windows XP (KB924867) http://www.microsoft.com/download/en/details.aspx?DisplayLang=en&id=6446

  It would solve this problem (see http://hyperbowl3d.com/oldsupport.html).

  I downloaded the update, and it says:

  "Setup has detected that the version of Service Pack for this system is newer than the update you are applying"

  So I can't install the update. Is it possible to reinstall this hotfix without remove SP3 or is there another work around, I can use?

  Thanks in advance!

  Welcome & thank you for your comments.