Cannot install XP on PC minitour Convertible HP Compaq 8100 Elite

Similar Questions

• blue screen on PC minitour Convertible HP Compaq 8000 Elite

  It is a new computer purchased from OfficeMax and just put in service on January 4, 2014.  I get monitor outages, with the error code display driver stopped responding and has.  It's a nuisance, but all of a sudden I'm getting a blue screen crash as well.  Everything I could rescue this accident most recent was

  "Signing of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.48
  Locale ID: 1033

  "More information about the problem:
  BCCode: 116
  BCP1: FFFFFA8005F124E0
  BCP2: FFFFF88004035CB0
  BCP3: 0000000000000000
  BCP4: 000000000000000C
  OS version: 6_1_7601
  Service Pack: 1_0
  "Product: 256_1.

  I scanned with everything I know how and much more.  Now I'm starting to wonder if I can trust my data on this computer.  Any help is greatly appreciated.

  You are the very welcome.

  You need not purchase contracts.

  It's to put server to update firmware only.

  I don't know why this driver was not installed.

  However, this would have been the last being for your model.

  If you want to take a little more money on the PC, I would just buy a cheap video card and that should take care of your dilemma.

  I have an 8000 Elite CMT as well running W7 Pro x 64.

  I installed a graphics card, and it works fine for me.

  If you want to go this route, let me know and I'll give you a link to a good cheap video card that should work perfectly for your PC.

• Cannot install Windows XP on Windows 7 on a HP Elite 2540p laptop

  Receives a blue error screen as soon as all the system files are loaded and the "installing Windows" message appears.  Tried to install first of XP Pro OEM CD and CD of HP.  At the same time with the same results.  Hard drive had Windows 7 originally.

  Hello:

  On your mobile in particular, it is easy to install Windows XP, if you know what to do.

  Read the section of the installation guide for the repair on the link below, Chapter 5, page 100.

  http://bizsupport2.Austin.HP.com/BC/docs/support/SupportManual/c02664684/c02664684.PDF

  Change the device SATA from AHCI to IDE mode. Save the setting here (F10 key), and again when you go out.

  Start your XP disk and it should now install without problem.

  The tricky part is to install the SATA AHCI driver after installing XP, so you can change the setting back to AHCI.

  This will allow your drive HARD to use native command queuing, which is not available in IDE mode.

  Install XP, post back when you're done, and I will give you the instructions step by step to install the AHCI driver so you can change the storage back from IDE to AHCI setting.

  You cannot change the setting back until you load the AHCI driver, or the laptop does not start.

  Paul

• can use gtx ti 750 with HP compaq 8100 elite minitour

  Hello

  I have mini tower hp compaq elite 8100 and I want to upgarde graphics card GTX 750 it so I can do it or not!

  my spec

  16 GB OF RAM

  I5-650

  320W PSU

  I see no reason why it wouldn't work, but I can't guarantee it will be.

  You must just have an empty adjacent PCI, you can remove the extra width of the map.

• HP Compaq dc7800: can I install SSD on HP Compaq dc7800 Minitour Convertible?

  Hello

  Can I install SSD on HP Compaq dc7800 Minitour Convertible?

  Should I notice something special in this SSD buying?

  I need to by a "cage" for the SSD?

  Hello:

  A problem you will have, is that there will be no support on this model, which means that you will not be able to optimize the drive SSD TRIM.

  This is because the PC has only two parameters of the disk controller... RAID and IDE.

  Support RAID TRIM is not introduced by Intel until the 7 Series chipsets came out.

  Yours has a 3 series chipset.

  That's the only reason why I have not put an SSD in my dc7800.

  Another problem you may encounter, it's that my dc7800 rejected all the sata III drives I have installed unless it's a SATA III which came with a HP PC.

  I had to take the disk of 1 TB SATA III out of my Elite CMT 8200 and exchange with the one I bought for my dc7800 because she had the symptoms listed in this HP newsletter below...

  http://h20566.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=3718645&calledBy=&AC.admitted=1379354458533.876444892.199480143&docid=emr_na-c02711513-3&docLocale=

  I first thought the WD Caviar Black drive I bought was defective and I returned it.

  When the spare drive did the same thing, I understood that there was some sort of compatibility issue and came across the above document.

  Bottom line... I didn't do it.

• Cannot install the printer and windows update error 80070026

  Original title: Registry Editor not work cannot install the printer

  I have Vista the operating system on a Dell laptop with a Core 2 duo, map of Nivea.  Norton Antivirus now after it has started.

  Tried to install the dell printer after uninstalling all printers.   I scan my system using promp... sfc/scannow then I got windows results resource protection found corrupt files but was unable to fix some of the them.details are included in convertible bonds. Journal windir/logs/CBS/CBS.log
  for example:C:/windows/log/cbs/cbs.log

  I looked in the directory C find regedit.exe to rename, but was unable to find it.   I found these if this can help.

  Regedit.exe.4288.dmp
  Regedit.exe.3280.dmp
  Regedit.exe.2292.dmp

  I also got error or popup that without running windows Explorer and then restart it.   I can't install the printer as it pops up and I need to close the program.

  also receive error installer that it is already running
  install GUI is unresponsive

  error code 80070026 during the installation of windows updates.  I open without addons and updates are all to date.

  I'm sorry that there is so much information and error codes.  I think that all what concerns the corrupted files.   Can you help solve c drive please.

  Hello

  1. What is the serial number and model of the printer?
  2. What are the failed updates?
  3 have there been any changes made on the computer before the show?

  I suggest you try the steps to solve the problem with the installation of printer.

  Method 1:
  Run the Fixit and check if it helps.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  For more information, see the links:
  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers
  Search for a printer, the manufacturer Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website
  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  I suggest you try the steps to fix the problem with Windows Update.

  Method 2:
  Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
  http://support.Microsoft.com/kb/929135

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 link to return the computer to a Normal startup mode.

  Method 3:
  Temporarily disable the security software.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

  Method 4:
  You can also manually install updates (KB number) by downloading from the Microsoft Download Center.
  http://www.Microsoft.com/downloads/en/default.aspx

  For more information, please see the links.

  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows

  Warning: An upgrade on the spot is the final solution before you have to reinstall the operating system. Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process

  Hope this information is useful.

• Cannot install iOS 10.0.1 with Apple Configurator 1.7.2

  Hello

  I have 60 iPads in 5 carts (12 per basket) that I need to install some applications on. They are already configured and supervised with Apple Configurator 1.7.2. I've never had problems in the past with AC1, I've always been able to install the updates and applications easily with very few questions, because of that I've never felt the need to update to AC2. However, this time during the update of ios and refreshment, I get the error 'complete with an error - cannot install iOS' 10.0.1 And now 12 of my iPads are stuck in recovery mode.

  I tried before wipe them off and re supervise them, but I always get the cannot install iOS 10.0.1 error, followed by all the iPads stuck in restore mode. I tried to update only 1 or 2 at a time. I tried the update/supervise them with no apps queued for installation. I tried to restore the iPad via iTunes, which works, but when I try to put it back on AC1, I still get the same error mode and recovery.

  I tried searching online for compatibility with the new iOS and AC 1 problems but found nothing.

  I would like to know if there is more information I should provide that might help.

  Thank you for your time.

  Ben

  Hi Ben

  Makes your iPad successfully update to IOS 10, we have approximately 400 ipads, I've updated a single ipad at 10 IOS using our MacBook pro AC1 OSX El Capitan to test, ill try another now and see if its success.

  When you connect an ipad update the Configurator re-download the IOS 10 or use a cached copy?

  How your Configurator is connected to the internet (behind Proxy, Wifi, Ethernet), perhaps the downloaded IPSW file is corrupted and need to be redownloaded removed\.

  Kind regards

  Rick

• Cannot install 9.3.5 iPad after two downloads

  Cannot install 9.3.5 for ipad

  HI I just wanted to know if it was on an ipad or a. Mac if it's an iPad plug support on a computer or go on http/www.apple.com

  Thank you

• Cannot install OS: "this identifier Apple has not yet been used.

  I just got my first Mac yesterday, a mid 2010 Macbook of opportunity. It's in great shape, works great, I was briefly very satisfied with my purchase. Then I tried to reformat/reinstall, as it does whenever purchasing a computer used.

  I followed the instructions here: https://support.apple.com/en-us/HT204904 and when I got to the step three, after the failure of the hard drive, it wouldn't let me install the operating system. He wanted to connect first with my Apple ID, so I did an Apple ID, but now it keeps giving me an error "this identifier Apple has not yet been used in the App store" and then it gives me the opportunity to cancel or "review". Click Cancel simply cancels the installation, just by clicking on review also cancels the installation.

  An ID is not necessary, but there is no way I can see to avoid it say the instructions on this page. It was suggested that maybe I could avoid the connection on the way to recovery, rather than recovery of the Internet, but the Cmd + R and Cmd + Option + R give recovery of the Internet. I don't see any way to get to the regular recovery.

  I had a suggestion to install from the disc, but I have not all discs. If I could download it from somewhere and burn them then that would be nice, but the instructions on this page are pretty clearly that it should not be necessary to use disks. I should be able to do without signing in.

  So... what upward with who? Where should I go from here? Is it possible to do a regular recovery? Or bypass the Apple ID thing?

  < published by host >

  "a mid 2010 Macbook opportunity."

  "Cannot install OS:" this identifier Apple has not yet been used.

  It's the property > change owner of a Mac of opportunity

• I cannot install extensions, they appear with "will be installed after you restart Firefox" even after that I restarted.

  Hello

  I cannot install extensions, they appear with "will be installed after you restart Firefox" even after that I restarted.

  The 'Intermediary' folder is present and rest after a restart, but the extensions do not get installed. They show in the extensions page with the message "will be installed after you restart Firefox" and remain like that, no matter how many times I restart.

  Any idea?

  Under Firefox 24.0 Windows 8.1

  Thank you very much
  BD

  P.S. Just tried to install the add-on "convenience store" before asking the question and I got an error saying that it cannot install because it cannot change the necessary file. (I did manually instead)

  I tried to delete the files extensions.* nothing works. However, I deleted the addons.sqlite file and restarted my computer (computer not only Firefox) and that seemed to do the trick. Problem solved.

  Thank you for your help, it is appreciated.

• "Cannot install update and the error occurred ' iOS 9.3.2

  Try to upgrade to 9.3.2 but get "cannot install update and the error has occurred" if I am on WIFI or via iTunes. Someone else?

  Go to settings > general > storage & use iCloud > manage storage (the first) > and if there is an update, delete it. Then go to settings > general > Software Update and try again.

• Cannot install the update error

  I'm trying to update my iPhone 6 16 GB running iOS to iOS 9.3.1 9.2.1 but when I try to install the OTA update it says "cannot install the update." How could I solve this problem? The contact ID is not available because the unit is gray with a white screen and a contact ID button or space, which affects the update process?

  I would try to update via iTunes

  Connect the device using a cable to a computer (PC or Mac) running the latest version of iTunes 12.3.3

  The time that the phone is detected, choose software update

  If the phone is not detected - see here

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

  OR

  Please take a genius appointment at an Apple Store, or select another authorized service provider.

• Cannot install iOS 9.3.1

  I downloaded the updated iOS (9.3.1) but cannot install it.

  I made sure I got enough memory on my phone and the battery charge, but it will not install. Can someone help me?

  Thank you!

  Hi moppsy,.

  Thank you for using communities Support from Apple!

  Leave your post, sounds like you downloaded the iOS 9.3.1 update live, but have not been able to install it. We know that this type of situation can be frustrating, but we are here to help.

  To resolve this situation, I would recommend the work done these steps in the following article.

  Delete and redownload the update iOS

  If you can't always install the latest version of iOS, try to download the update again:

  1. Go to settings > general > storage & use of iCloud. Under storage tap manage storage.
  2. Find that the iOS to update in the list of applications.
  3. Press the update IOS, then remove the update.
  4. Go to settings > general > software update and download the latest iOS update.

  If the problem happens again, try to update with iTunes.

  Get help with updates of live iOS - Apple Support

  Best!

• Compaq 8000 Elite COnvertible: compaq 8000 elite minitour convertible pci driver windows 7

  Hello, I had trouble finding the right drivers for my port of compaq 8000 elite series minitour convertible pci and pci simple communication controller, running windows 7 ultimate 64-bit...

  I found a link in a different thread, but the link does not work...

  Could someone help me please? It would be greatly appreciated☻

  Kind regards

  David

  Hello:

  You need these drivers for devices...

  Simple Comms:

  This package contains the device driver Intel Active Client Manager Host Embedded Controller Interface (HECI) for desktop models and operating systems supported.

  FTP://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45411.exe

  Serial port:

  This package contains the Intel Local Management Service (LMS) and the support of Serial - over - LAN (SOL) for Intel Active Management Technology (AMT) for the supported desktop models and operating systems. This software is part of the Intel Digital Office Initiative.

  FTP://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45367.exe

• Satellite L655-145 cannot install the bluetooth stack

  Cannot install bluetooth stack. Just Setup freeze. All other drivers installed successfully. Device Manager only show Bluetooth ACPI device. This problem appeared after the update of the BIOS of the original version 1.80 to more older (1.80-1.90-2.10-2.20 > > >). Downgrade from 1.80 take no effect.

  PS. Sorry for my bad English.

  Hello

  As far as I know the laptop is equipped with WIFI and Bluetooth combo card!
  This means that Wlan and BT functionality is controlled by a single card.

  If you BIOS outsider (don t know why) Please put failing first.
  Save the changes and reboot the laptop.

  Then download the BT BT Toshiba stack.
  Activate BT (FN + F8), then launch the installation of battery BT once more.