Cannot just enter the key wifi - where is the dashboard?

Similar Questions

• VIO cannot connect to the dashboard Openstack

  I managed to deploy openstack.

  but I am unable to connect to the dashboard openstack

  

  

  

  Public IP address is 192.168.10.77.

  

  

  This is the LoadBalancer IP information.

  I don't know what the problem is.

  Please tell me what to do.

  Hi Jegwang,

  You used the same subnet for the public network and management. You must use two different subnets for those. If you really want to use the single subnet, run the following commands on the two load balancing VMs:

  sysctl-w net.ipv4.conf.eth0.rp_filter = 0

  sysctl-w net.ipv4.conf.eth1.rp_filter = 0

  This should allow access to VIP audience. Note that to make it permanent after restarting the virtual computer, you need to add qu'a/etc/sysctl.conf.

  Another note: this is an unsupported configuration and you might expect other things to break. Also settings that I specified above make your vulnerable loadbalancers spoofing IP address, so you should not put in Internet network accessible.  The right solution for this is to redeploy VIO using separate subnets for the public network and management.

  Best regards

  Karol

• Cannot circumvent 'enter the current password';

  cannot reboot Acer Aspire 5315; Vista - Home Basic; Failed to get the configuration of the Bios because the password is not recognized. Is there a way to restart from flash stick without loss of data on drives C and D. I have lots of pictures on the D partition. His machine for 4 years and I do not have a disk to reboot.

  Hello

  Are you talking about the BIOS password when you start your computer, not your passwords first

  If you have problems with a BIOS password, you will need to contact the Acer Support on the advice of Microsoft.

  http://support.Acer.com/us/en/default.aspx

  Microsoft prohibits support in the Forums of 'crack' or derive from passwords.

  But if your problem is with a password for the user account, and you are using the right account password, it's their advice:

  "How to use system restore to log on Windows 7 or Windows Vista when you lose access to an account"

  http://support.Microsoft.com/kb/940765

  See you soon.

• Calculations - how to manually enter the fields

  In a pdf form, I need to add all the values in a row. There are 32 lines, I would like to enter the field values rather than 'choose' on the calculations tab.

  (Like that I can do a search and replace in the word program and just enter the new values of row field.)

  If there is a way to better / more short, please let me know.

  Since I was 15 columns and 32 rows need separately "calculations", to "choose" from a list of 480 fields is cumbersome at best.

  (I read somewhere that javascript must be enabled, which it, although I don't use java script, trying to fill in the fields in the first box.)

  The latter is what you would have to do for the simplified field notation option and it should work.

  The JavaScript option might be something like:

  (function () {}

  Get the field values as numbers

  var A4 = + getField("A.4").value;

  var = B4 + getField("B.4").value;

  var = C4 + getField("C.4").value;

  var D4 = + getField("D.4").value;

  Set the value of this field to the amount

  Event.Value = A4, B4, C4 + D4;

  })();

• Cannot access an external hard drive lost, encrypted BitLocker recovery key and do not know where to enter the password to unlock it.

  I recently installed Windows 7 Ultimate, 64-Bit on a Sony Vaio. Worked great, seems awsome and rolls GOOS GOOS, for a new operating system. I decided to use the BitLocker feature that I wanted to use from Vista Ultimate, which was incredibly dificult unlike BitLocker in Windows 7, which is extremely simple to use. So simple in fact, I encrypted my external hard drive Verbatim 160 Gig where the original BACKUP files are with ALL my original documents, settings and files of the company are located. I haven't used a USB key, or don't have I recorded the RecoveryKey, I printed and completely loses it, I remember perfectly well the password I used. Problem is I have NOW, I can't ACCESS MY HARD DRIVE! When I try to access the hard drive it asked me not the password recovery key. Please help me, im in deep poopie. I wish I could change the world, if only I could find a diapper big enough to hold so many things...

  Hey thanks for the reply Kev, but I must say that I did and didn't. The new Windows 7 operating system has this feature built-in and it is much easier to use. So yes I did it, but I made using windows 7 have where, instead of download all the files, I just insert the original DVD of WIndows 7, I restart my PC and follow the instructions of recovery of BitLocker recovery key, and voila. The problem is that I've NEVER stored on this particular external hard drive recovery key. BTW: I tried to follow the steps mentioned by Mr. Vijay but inconsistent tool with my operating system (Windows 7 64-Bit) it only works with Vista (not 150 percent certain but close). Please correct me if Im wrong. I wish I could change the world, if only I could find a diapper big enough to hold so many things...

• I just bought Adobe Photoshop elements 13 for a Mac and try to install. I'm about to enter the serial number, but it will not letters. What I do and where do I go for help?

  I just bought Adobe Photoshop elements 13 for a Mac and try to install. I'm about to enter the serial number, but it will not letters. What I do and where do I go for help?

  Nitan15479421 serial number cannot contain letters.  It is likely that you have received a redemption code.   Please see Rédemption Code help for more information on how to use your redemption code.

• I just bought a key code to update from microsoft for windows xp. When I enter the code is says I have an invalid code? can someone help me?

  I JUST BOUGHT a key code to update from microsoft for windows xp. When I enter the code is says I have an invalid code? can someone help me?

  Hello

  1. what exactly are you referring?
  2. Enter the code to upgrade the main code of the Office application or operating system?

  Follow the steps in this article.

  You receive an error message after you enter the product key when you try to install Windows XP
  http://support.Microsoft.com/kb/310637

• Where can I enter the product key for Vista upgrade to Windows 7 Professional?

  I bought Windows 7 Professional PIN from Best Buy. I was told that I could move from Vista by going nd online during extraction of the key using the PIN code.  I got the key and follow the instructions. After clicking on upgrade of Windows antime a box does not seem to enter the product key

  You cannot use the Express upgrade from Vista to WIndows 7 - you must use a full upgrade disk.

• where to enter the license key for update my adobe reader software?

  where to enter the license key for update my adobe reader software?

  Adobe Reader is free and requires no key. If you are prompted for one, you probably installed the trial version of Adobe Acrobat instead of Adobe Acrobat Reader.

• Captivate 9 - text entry area - cannot navigate through the input of text boxes on the same slide using enter key (works only tab)

  I designed a slide that has 3 areas of text entry.

  I need the user to be able to type in their response to the first box and then press the ENTER key, it will pass them in the next text box. After typing in their response to the second box, press ENTER, and then have developed pass to the third area.

  I don't want to use tab, I want to go to work as a shortcut key, so this works well on all devices. It feels like a trip to the logic of the user.

  I removed the button SUBMIT and check the validate user input.

  I put the shortcut key to ENTER in propriety / Actions area

  However, after that type in an answer and pressing on enter, the focus is not moved in the input text box available at the following address on the same blade.

  This happens regardless of browser (tested Firefox, Chrome, Safari, and IE9/10) and also OS - Windows 7, Mac OSX 10.9, 10.10 and latest version of iOS

  Only the tab key works (Ive even tried with other keyboard shortcuts and it always comes back to TAB).

  I know that this feature is possible in Captivate 9. I have read and watched many tutorials online, it seems a very basic feature. I could be wrong.

  This is a feature of wholesale/known or I'm doing something wrong.

  If a bug, is there a plan to fix it soon?

  Indeed, your problem is related to the Enter key as a shortcut key, not to have multiple TEB and one absolutely validation button. Take a look at this article very old (you are not the first to ask about this):

  A submit button for multiple text entry boxes? -Captivate Blog

  But here I explained to indicate to the user click in a next TEB, do not use input.

• Manually enter the WPA key in Bravia, TV freezes

  Hey there,

  I'm trying to set up my TV (model KDL-46NX720) with my wireless network. This should be pretty easy... Problem is: I don't have the remote. All directions, I found were using the remote control...

  I tried to maneuver on mine it and enter it manually, using the buttons for volume/channel/enter/House on the side of the TV. In fact, I was quite successful and was able to select the right wireless network. However, I came across a problem as soon as I got to the screen that asks for the WPA key. It came with the scroll slowly flashing in the text box, while the 'k' has been selected below. It showed my old password wireless in the text box and absolutely not allow me to delete or edit - or even move the selection of the 'k '.

  I tried to press the 'enter' all by pushing the channel up and down buttons. I tried to do the same using the 'home' button He would not even make something when I pressed the button "home" only - wouldn't take back me to another screen or the main menu... Nada. The ONLY THING that seemed to allow me to do was to change the volume. Whereas before the volume keys hands left-right scrolling capabilities, they suddenly changed the function to regain control on the volume actually...

  Any ideas on what is happening here? I want to just set up the wireless to connect my iPhone and use it as a remote control (as I did in the past - yes I went through this before, but never experienced frozen screen password!)... and maybe just maybe finally get to see Netflix!

  Really shouldn't be so hard... but alas.

  Thanks for all the ideas and input.

  Hi phlyinphish9,

  You need a remote control to enter the WPA key, but a work around you can try is to have the TV connected via a wired facility first, and then have your iPhone enter the WPA key through the wireless setup. Or if you have a set-top box remote, try to check if it can manage to the TV.

  If my post answered your question, please mark it as "accept as a Solution.

• How to disable the MIDI to the logic of just my USB key

  Question: Where exactly should I do to disable the MIDI to the logic of just my USB key (I am sending them to another application and do not want it also picked up in L, but don't want any logical MIDI stop). And where does logic to send any MIDI out? I looked at all the prefs I can find, watched dozens of links tuts and docs online, nothing... It's so easy live, sigh!

  TIA!

  Open the environment window

  go to the clicks and ports

  look out on the physical input and find your usb device

  New-> monitor (create this object)

  pull a cable from your usb device on the physical input to the monitor

  That's all

  When you want to run into logic once again simply remove the cable

  get that to work first, then we can discuss outings

• Why new 6s my wife keep asking the apple id password once we've entered the password?  I know it's asking to update the downloaded applications under my id.

  My wife and I just upgraded to the 6s.  His phone will not update the downloaded applications under my apple ID and continues to request the password for my apple ID.  We are entering the correct password, but he told us that he failed.  I restarted and disconnected icloud on his phone.  We never had this problem before.  Why her phone does not accept the password of my apple ID.  And Yes, I've confirmed that the password is correct... I had to use it to post this question.

  Thanks for any help.

  Promulgated by this Apple ID on his phone? Have you checked the settings > iTunes and App Store and make sure that the ID is good in there?

• Tecra M5 cannot enter the BIOS to change the setting too boot from cd first

  Tecra M5 cannot enter the BIOS to change the setting too boot from cd first

  I bought on ebay and the seller sold me a dubious version of xp so I want to format and install my own at the start he said:

  The Intel Boot Agent GE v1.2.31 initialization
  KE - E05: the LAN adapter's configuration is corrupted or has not been initialized. Boot agent cannot continue

  Hello

  The message looks like you tried to boot and install Windows LAN

  If you want to change the boot order, I recommend pressing the F12 key, immediately after that the laptop was turned on!

  A new start menu should appear, then you can choose the reader of CD/DVD (ODD) and a boot device.

  Also by pressing the C button should allow you to boot from the CD inserted, bootable.

  Welcome them

• Satellite L670 - 1 DL-after to enter the network key, it fails to connect

  I have a nine L670 and want to connect to my WIFI at home (Fritzbox) access point.
  Realtek RTL8191SE WLAN card can see the WLAN, but as I enter the security network key it fails and does not connect to the WLAN. I have an older laptop in parallel to check that the WLAN router is working and that the PC connects to the router.
  I use WPA - PSK / 802.11 g.
  Realtek version is 2015.1.427.2010.

  Help, please!

  Christian

  Hey,.

  Are you sure you entered the correct key of WLAN security? Maybe you typed wrong then you should check it again.

  Otherwise, you can try to update the WLAN driver. New driver WLAN, you can download from the Toshiba WLAN Portal:
  http://APS2.toshiba-tro.de/WLAN