Cannot locate component user32.dll

Similar Questions

• Win SAT.exe Unable to locate component MSVCR100.dll was not found

  I get error when you try to use REFREASH NOW in control of Panel\Performance information and tools is when the error # Win SAT.exe Unable to locate component MSVCR100.dll is not found appears. I guess that I need this file can someone please HELP me thank YOU

  Hello

  Were there any changes made to your computer before this problem?

  Perform the steps mentioned below and check if that helps:

  Method 1: SFC scanner on the computer to ensure that the system files are intact:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: Follow the steps proposed by O of Marilyn and check if this may help:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/the-program-cant-start-because-msvcr100dll-is/5c9d301a-2191-4EDB-916e-5e4958558090

  I hope this helps.

• Custom.exe - Unable to locate component. pptool32Ex.dll was not found.

  I have a laptop HP Pavilion Entertainment with Windows Vista is the operating system. I install the software of Penpower Jr - 50 for the success of laptop. But, when I click the Penpower icon on the start menu, it will not start (failed to start) and above error messages were displayed on the screen. I uninstall and re-install again. But the same error messages appear on the screen.  Can someone tell how to fix this problem so I can use the tablet.

  I did not have this problem when the same Penpower Jr - 50 software was installed in another computer with Windows XP as the operating system.

  MapleBridge

  Hello WK123,

  In addition to the response of Bindu, you can check with the provider of software for the Penpower Jr program to verify that the program is compatible with Windows Vista. If so, you can check that the Pen Power program is uninstalled from Control Panel > programs > programs and features and then try to reinstall the program to check if the problem persists. Alternatively, you can try to install the program by using a different user account.

  Regarding the additional error, please relay if any additional programs have been installed recently. You can also run a scan of Antivirus\malware by using Antivirus software.

  Also, here is a link to a Microsoft Security Essentials, an anti-malware solution free for your computer that helps protect against viruses, spyware and other malicious software:

  Help protect your PC with Microsoft Security Essentials

  Thank you

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• installed realplayer and got the message application can not start cannot find the component MSVCP90.dll

  I have my computer with a user account that is not an administrator account. I changed it to an administrator account so I could add realplayer and when finished dwn says loading message cannot start application because cannot find component MSVCP90.dll. what exact location go so that I can install this component.

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=9b2da534-3e03-4391-8a4d-074b9f2bc1bf

• Explorer.exe Unable to locate component, this applicationfailed start because BROWSEUI.dll was not found, can access windows taskbar or white screen homepage

  Tried the boot failure, etc, but not good, were not the original windows disks

  Duplicate thread:

  URL: http://answers.microsoft.com/en-us/windows/forum/windows_vista-system/browseuidll-was-not-found/7ef0bd88-ec8f-4a5a-bde2-43d0f94cab03

  Title: BROWSEUI.dll was not found

  Details:

  I use Windows Vista Basic (build 6002 sevice pack 2) as widows try to open I get the message, cannot start Windows (explorer.exe Unable to locate component) then a message (this applicationfailed start because BROWSEUI.dll was not found, reinstall the hotfix applicationmay) it's folled by a message (windows explore stopped working) I'm then left with a blank screen bar none tasks or a desk top, the only way to access the internet is through the Manager tasks, but I have no access to windows

  Hi, AlanWalker1885,

  FYI: A moderator will pass this thread to the appropriate forum.  The post belonged in the Internet Explorer forum.  Please take note of the drop-down menus when you click on the link below.  Thank you.

  http://answers.Microsoft.com/en-us/IE/Forum/ie7_6-windows_xp

  Do you have any friends who might copy the file browseui.dll from their Windows XP CD to a flash drive?

  Have you tried to register browseui.dll?

  1. At the command prompt, place you in the %Windir%\System32 folder.
  2. Type regsvr32 browseui.dll/u, and then press ENTER.
  3. Type regsvr32 browseui.dll, and then press ENTER.
  4. Restart the computer

  See the solution given here:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/error-message-browseuidll-file-is-not-a-valid/04b33b18-d87c-40AE-BE35-71720dbbbab2

• c0000135 Unable to locate component because rpcrt4.dll was not found.

  Hello

  I installed an antivirus program. Today, I tried to start my laptop and restart every time. I discovered that the error isc0000135 Unable to locate component because rpcrt4.dll was not found .

  I think that the antivirus has perhaps quarantined this .dll file. I have searched the Internet and found ways to solve it, but the problem is that I can't even get into my office in Mode safe.

  He cannot start somehow.

  Someone said to repair using the Windows XP CD, but my laptop is not the CD player.

  EDIT: Ok, so now I found on Acer eRecovery Management.

  He has the ability to restore the operating system. But the prob is now that I don't have enough space for the operation back up my files. There is an option to completely reformat, but I don't want that.

  I'm helpless now.

  Any help will be greatly appreciated.

  Hi kaixas,

  If you are not able to start the computer in normal mode or in Safe Mode, I don't know how you would back up your information.

  If you have no way to start the computer and no way to start the computer with the XP disc, you don't maybe not another option that recovery of the system.

  If you back up your information, you can ask a friend if they have an external hard drive orjump drive to save your backup on that connects via the USB port.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error: mmc.exe - Unable to locate component. This application has failed to start because apphelp.dll was not found.

  Original title: this application has failed to start because apphelp.dll was not found.

  A window titled "mmc.exe - Unable to locate component" in the title bar, which includes the message:

  "This application has failed to start because apphelp.dll was not found.  Reinstalling the application may fix this problem. »

  that appears when you access many of the 'administration tools' in the start menu.  e.g. component, computer, event viewer Management Services, etc.

  I'm afraid I accidentally deleted apphelp.dll when cleaning on other files.  I found copies of apphelp.dll in following two tracks.

  AppHelp.dll C:\WINDOWS\$NtServicePackUninstall$ 124KO Extension Application 09/08/2004

  AppHelp.dll C:\WINDOWS\ServicePackFiles\i386 123KO Application Extension 04/13/2008

  I tried Recuva, but he could not find the file.

  How to re - install a such apphelp.dll suggested by the pop - up error message window?

  Thank you

  I thought it would be something that began with "A".

  For low overhead and free, think of Microsoft Security Essentials (MSE).

  MSE and a regularly good scan with the definitions updates using MBAM and SAS (from post above) should keep you in good shape according to your Internet habits.

• "SiSUSBrg.exe.exe - Unable to locate component" appears at startup. "This application has failed to start because SIS_Lib.dll is not found."

  Original title: SiSUSBrg.exe

  "SiSUSBrg.exe.exe - Unable to locate component" appears at startup. "This application has failed to start because SIS_Lib.dll is not found."

  Hope that this is not a virus!  Help?

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353
  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.

• Lsass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found

  Original title: oleaut32.dll xp

  My system XP pro/sp3 does not start normally, without danger or with the original sys disk. I get a message
  Isass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found. reinstalling the application may fix this problem.
  However, I can't in the operating system to do a re-install.
  Any suggestions?

  If c:\windows\system32\oleaut32.dll is missing, you will see messages like this:

  Lsass.exe - Unable to locate component
  This application has failed to start because the OLEAUT32.dll file not found.  Reinstalling the application may fix this problem.

  If the missing file is the only problem, you might have to do a reinstall to fix.

  There should be a copy of Oleaut32.dll in the c:\windows\system32\dllcache folder, so if you can get in the XP Recovery Console, you can just replace it - then you are going to have to start on something to do.

  Once started in the XP Recovery Console, you must enter this command at the prompt:

  Copy c:\windows\system32\dllcache\oleaut32.dll c:\windows\system32

  If the file is not in the dllcache folder (it should really be), depending on your installation, this command can work:

  Copy c:\windows\servicepackfiles\i386\oleaut32.dll c:\windows\system32

  Answered in the affirmative if invited to replace any existing file.

  I don't know what the Microsoft Support Engineer think that KB307545 or KB922371 will help you.  I think that the MSE is just throw a few things to try and some links.  You don't describe symptoms consistent with the need to use one of these methods.   I would say the MSE has never seen this problem before, made no attempt to reproduce the problem, and has no idea how to fix this.

  If your CD does not start in the Recovery Console, or if you don't know what kind of CD do you have to do a CD of XP Recovery Console and boot on it (no media XP required).

  Here's how:

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  After replacing the file, remove the CD and type 'exit' to leave the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Windows cannot locate corefoundation.dll. I think I deleted it by mistake

  Windows cannot locate corefoundation.dll.  I think I deleted it by mistake

  Hello
  1 are you face any problem in your system?
   
  I suggest you to see link below and check if it helps.
  http://support.Apple.com/kb/TS2211
   
  Hope this information is useful.

• "mwlDaemon.exe - Unable to locate component. Application has failed to start because sysenv.dll was not found. Reinstalling may correct the problem.

  Vista message mwlDaemon.exe error
  At the start of Vista, I get the message "mwlDaemon.exe. - unable to locate component Application has failed to start because sysenv.dll was not found. Reinstalling may correct the problem"Question is how should I do this? Most programs work OK, but I think the problem might be preventing a backup is made.

  Hi Thegardener,

  ·         How long have you been faced with this problem?

  ·         You did changes to the computer before the show?

  Follow the steps below for a possible solution:

  Method 1: I suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

   

  Method 2: If the method above is not enough, you can try to uninstall and reinstall the application.

  You can see the article for more information about the uninstall of a program.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Hope this information helps.

• The message that McciAsyncEventMgrWnd does not work. Cannot locate ipworks6.dll

  Cannot locate ipworks6.dll

  Affects McciBrowser.exe

  You can also start / Control Panel / administrative tools / Event Viewer and look for errors related to all of the above mentioned files.  I would like to see you suggst request.  Here's how to use Event Viewer: http://www.petri.co.il/vista-event-viewer.htm.  If you find any click errors related to the entry for more information and try to copy and post it here so we can see what it says and maybe help.  It is not quite as easy as suggested above, Process Explorer but it may possibly find the problem and identify the cause, then we can find a solution.

  If this is indeed the application of Verizon Online Support and help we speak, maybe if uninstall you it and download and re - install it weill solve the problem.  Here is a download page with a number of applications from Verizon who use this program http://software.informer.com/getfree-mccibrowser-download-verizon/. -If you know one affected so try this procedure to see if that solves the problem.  It can't hurt to try, and it may very well do the trick.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error message: cannot find the component ConnAP1.dll

  On startup, I get the message: apdproxy.exe impossible to locate the component ConnAP1.dll and the problem can be solved by reloading the application.  At that time, I have none of my applications.  How can I fix this problem?

  Hi kenwgoff,

  I suggest you put the computer to boot, to understand the program causing the problem.

  Activate the clean boot, refer to step 1 in the link below:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Continue with the remaining steps to pin-point on the third party service.

  Note: After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• TPSMain.exe - Unable to locate component

  Whenever I start my computer, the following error message appears TPSMain.exe - Unable to locate component-
  This application has failed to start because TPwrReg.dll is not found. Re-installing the application may fix this problem.

  Nobody knows what it means and what I can do about it.
  Help, please

  Hello

  tpsmain.exe is a process associated with Toshiba laptops. He manages the power save function to ensure that the system goes to a power saving mode when it is not used.
  I would recommend to eliminate energy saver completely from the BONE by using Add and remove the option programs in the control panel. Then try again to install this Toshiba utility again. You can use this software to the tools & utility Cd or you will check the download page to Toshiba for latest updates

• GetGuiResources handle question User32.dll

  Hello

  I need help for my LabVIEW 2009 vi. I'm basically trying to get the number of GDI objects for a process, the same newspaper for some time (something like the Windows Task Manager - but I intend to use LabVIEW for this as a learning experience)

  I have a vi prototype that gets the ID of a process name process (say, notepad.exe), gets a handle for this ID and calls user32.dll [GetGuiResources] method to get the number of GDI objects. When I use C# for the programming, I am able to get the number of GDI, but when I followed the same steps in LabVIEW, I get the same. I narrowed the problem to the last step where the "handle" is passed to user32.dll. I don't know what Iam doing wrong in vi. Calling the method also seems fine - no error is reported. I'm I doing something wrong when using type cast step?

  Steps to reproduce the problem: launch the application Notepad and file performance c# or LabVIEW vi. Observe that we do not get the GDI County in case of LabVIEW.

  Please suggest me a solution. I have attached the code c# and LabVIEW vi for reference.

  Well, I really doubt that the .net object handle is directly handle Windows value itself. It is rather a refnum of LabVIEW encapsulating the actual object which may or may not be the handle itself. So you cannot just that cataloged and hope for Windows to recognize as valid a process handle.

  Instead, you must treat them as object and execute a method on it to convert its value internal in a LabVIEW data type such years Int64. ;-)

  And btw. your VI repeatedly running causes a big memory leak. You must close each object refnum properly in order not to have LabVIEW and .net continue to create objects that are still lingering around until you close your LabVIEW application.

  .NET is a removal of automatic object that marks all objects whose last variable referencing is out of reach for the deletion program flow. Should therefore no obj.dispose () or a similar method. LabVIEW manages only a little different for different reasons and deletions only objects automatically, when the VI of highest level in the hierarchy was created an object refnum going inactive.