Cannot log on to Twitter. I get 403 Forbidden: the server understood the request, but refuses to fill. »

Similar Questions

• Everything I print gets stuck in the queue, but the document is printed

  ORIGINAL TITLE: Spooler

  I installed a printer on a pc windows 7 64. Everything I print gets stuck in the queue, but the document is printed. The printer is on the network, I tried to restart the spooler and erased the record of the spooler, but perisisted of the question, given that the document gets stuck, no other agency will be able to print, remove the paper and print again to print but the file gets stuck again on the queue. I tried to change the IP address, but the same thing happened. Can someone help me?

  Hi, Omorguz,

  Printer brand and model, if you please.

  Start > run > type services.msc

  Press enter

  Scroll down to print spooler

  Select stop

  Let Windows stop the spooler

  Control Panel > printers and Faxes folder

  Right-click on the printer icon, then select open

  If you see pending orders in the queue, select the

  Click file > cancel all Documents

  If a job shows the deletion, but never finished, open the command prompt window

  Start > run > type cmd

  Press Ok

  Enter Net Stop Spooler

  Press enter

  Wait for the DOS window opens and is

  Open the command prompt window

  Type Net Start Spooler

  Press enter

  If that does not cancel the print job:

  Your directory of spools Windows XP is located at

  C:\WINDOWS\SYSTEM32\SPOOL\PRINTERS

  It will usually contain files like these:

  FP00008
  FP00008. SHD

  There are two files for each remaining print job.  Just delete these and restart the computer.  Your queue should now be provisioned.

  If you are printing over a network, and the queue is not clear after the above steps:

  Go to the computer that has the shared printer connected and perform steps 1 & 2 above.

  If this does not work, then go to the computer when he was sent to the printing of the task and perform the steps 1 & 2 on this computer.

  Run chkdsk

  Start > run > type CMD

  Press Ok

  Type C: chkdsk/r/f

  Press enter

  You will receive a message re: volume must be locked and you want to start scanning reboot?  Press y and press enter

  Type Exit to close the CMD window

  Restart the computer for the scan at startup

  This will check the integrity of your data on the hard drive of computer as well as find and fix errors that could corrupt your data or program files.

  I even recommend that you uninstall the printer and when you are done uninstalling, restart computer.

  When you reinstall the printer, reinstall it using the compatibility mode

  How to install a hardware device using the compatibility mode driver.

  http://social.technet.Microsoft.com/forums/en-us/w7itprohardware/thread/80cae5ee-dc98-4A2F-8284-a1ab826059b7

  It works on Windows 7 Professional, comprehensive and business - Windows XP Mode - it's free

  It's the best of both worlds: the new Windows XP Mode allows you to run Windows XP older right on your Windows 7 desktop business software.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-XP-mode

  e FAQ or choose a link from the top of this page.

• How can I get rid of the toolbar to comment and fill and sign?

  How can I get rid of the toolbar to comment and fill and sign?  It is so boring.  I use the version of Adobe Acrobat Reader DC

  Hi taet1971

  Are you referring to the right side window and you want to hide it? If so, then please visit this link: How to remove the CD player right pane (LOCKED)

  If you just want to close the comments toolbar, you can click the close (X) button on the right side of the pane.

  Concerning

  Rahul

• Firefox only runs very slowly I get "403 forbidden" message whenever I connect. How can I fix it?

  Firefox has turned very slowly on my Mac (version 10.6.8). Very, very slowly. In addition, whenever I connect I get a "403 forbidden" message for my websites favorite, my email, etc. How can I fix it?

  I tried to open Firefox without Add - ons and that did not help at all.

  I also uninstalled MacKeeper, but which did not help either.

  Hello

  I'm glad to hear that your problem has been resolved.

  If you have not already the case, please mark this thread as solved by the solution of marking.
  
  This will help other users experience similar problems helps to find faster and more efficiently.

  I hope that you will continue using our products and we thank you for contacting the Mozilla Support.

• Cannot install Cosmi perfect PDF Creator get an error, the macro cannot be found or has been disabled because of your Macro security settings

  OP: I can not install Cosmi perfect PDF Creator on my Vista desktop

  How can I change my security settings on my Vista operating system? I try to use Cosmi perfect PDF Creator and I get this message: "the macro cannot be found or has been disabled because of your macro security settings.

  Hello stewart02,

  It seems to me that the Word process does not and is not able to create macros to create PDF documents with the Cosmi perfect PDF Creator. You should be able to disable macros in the tools of the program. However, I suggest that you post your question to the Support for a better Cosmi respose to your question. Here is a link you can follow to report your problem:

  https://www.Cosmi.com/support/Cosmi_Support.aspx

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Get 403: Forbidden of Google API - encoding problems in my POST?

  Hi all

  I have problems connecting to the Google API by MAIL by following the instructions on this page:
  http://code.Google.com/APIs/accounts/docs/AuthForInstalledApps.html#ClientLogin

  I've also posted on the forums of the Google API, but I'm starting to wonder if it's a problem that this forum would be able to answer. Here is the post on the Google forum:
  http://www.Google.com/support/forum/p/Apps-APIs/thread?FID=1c22cb44eb5cbba600048a1fc5f25621&hl=en

  Google used to accept a GET request and provide a string SID, who served as a connection key services such as Docs and Calendar. He still offers this SID to GET requests, so I know I can do the BB Simulator applications, but it no longer accepts the SID as a connection key. Now, I have to send a POST request in encoding UTF-8, including parameters as my user name and password and get an AUTH token in response.

  Missions in this forum, I see that I can use a URLEncodedPostData object to encode the parameters for the WORK in UTF - 8. (I know I have to eventually get keys to use on a true signature BB, but I want to get a hello-world working on the Simulator before I pony up for them). I put the settings in this item and include it in the application, but I always get a 403: forbidden with an error message 'error = BadAuthentication' in response, as if my password is wrong. I checked the name of user and password with care, and I can do the JOB and get the AUTH token with the curvature of the line of control on this machine, there must be something about how I make the POST in the Java code.

  Someone on the Google forum suggested that my settings may not have been encoded in UTF - 8, but shouldn't the 'UTF-8' parameter in the constructor URLEncodedPostData manage this coding? I also tried manually escape the '@' in my e-mail address to "% 40" because it seems that URLEncodedPostData does not encode the symbol like this @.» (My password contained no character who must escape for URL encoding.)

  Here is the code I use. I use the Eclipse IDE for Blackberry OS 5 (I think that the version of the plugin for eclipse is 5.0.0_5.0.0.25) with Verizon 9630 Tour 5.0.0.591 Simulator. Any help?

  private void googleSignInTest(String emailAddress, String googlePassword){
  
  // see http://code.google.com/apis/accounts/docs/AuthForInstalledApps.html#ClientLogin
  String uri = "https://www.google.com/accounts/ClientLogin";
  
  InputStream inputStream = null;
  HttpsConnection httpsConnection = null;
  
  try{
  //create https connection, POST
  httpsConnection = (HttpsConnection)Connector.open(uri);
  httpsConnection.setRequestMethod(HttpsConnection.POST);
  
  //http://supportforums.blackberry.com/t5/Java-Development/HttpConnection-set-to-POST-does-not-work/m-p...
  URLEncodedPostData postData = new URLEncodedPostData("UTF-8", false);
  postData.append("accountType", "GOOGLE");
  postData.append("Email", emailAddress);
  postData.append("Passwd", googlePassword);
  postData.append("service", "cl");
  postData.append("source", "my-test-app");
  postData.append("Content-Type", "application/x-www-form-urlencoded");
  postData.append("Content-Language", "en-US");
  
  DataOutputStream outputStream = httpsConnection.openDataOutputStream();
  outputStream.write(postData.toString().getBytes());
  outputStream.flush();
  outputStream.close();
  
  //make the request and get response
  int responseCode = httpsConnection.getResponseCode();
  //403 Forbidden Error=BadAuthentication
  
  //Do something with the response
  ...
  }catch (IOException e) {
  e.printStackTrace();
  }
  

  Seems that I have to set the content type in the connection, and not in the post data:

  httpsConnection.setRequestProperty(HttpProtocolConstants.HEADER_CONTENT_TYPE, HttpProtocolConstants.CONTENT_TYPE_APPLICATION_X_WWW_FORM_URLENCODED);
  

  Also, the following line is probably not just:

  outputStream.write(postData.toString().getBytes());
  

  It probably should be:

  outputStream.write(postData.getBytes());
  

• Lightroom-"this file cannot be found" - How can I get rid of the preview?

  Hey.

  I started to import my photos from a computer disk using lightroom. I then use the bridge to get a glimpse of my files and remove unwanted images. When I return in Lightroom the images that I deleted were still seen in the catalog. How can I get rid of the other previews that manually going through all and removing now unwanted previews.

  Thanks for your help,

  Eric

  Hi Eric,.

  I think that the easiest way is to select 'Library' > 'Find all missing photos', then 'Edit' > 'Select all' then 'Photo' > «Delete pictures...» ». You get then a message to confirm to delete the photos and images of masters cannot remove because they are absent and where you have published one of the pictures with the help of a publishing services you get another message on this subject. Confirm and you should be done. I would really consider sorting and removal in Lightroom, even if you don't have to worry about all this.

  Hop this helps and have a nice day

  

  

• Get 403 Forbidden in Firefox, trying to use HELP

  Whenever I try to use the menu of HELP from LR (and other Adobe products), I get a 403 Forbidden message in Firefox my default browser.

  Is the URL which is a failure: http://community.Adobe.com/chcservices/services/redirect?u=http://help.Adobe.com & p = Lightro om_6.0 & l = en & id = AH_HOME

  If I copy and paste this URL in another browser, like IE, the redirect works and resolves at: https://helpx.Adobe.com/Lightroom/topics.html and the help page appears correctly.

  If I then copy this URL resolved in Firefox, the help page then also displays correctly.

  What is causing this problem with Firefox, and how can I solve it?

  Looks like you are running with the LR more up-to-date.

  The reason why we asked for the full version number is 6.0 (2015.0) has been released with a wrong URL in there for help pages and it has been fixed in the updated version first (?).

• Get 403 forbidden before I had the opportunity to present the passwords.

  Key URL of a site that I have been on several occasions. Before he even gave me a challenge screen it gives me a 403 Forbidden: access is denied by using the data provided. Works great in IE9.

  How about - https://ghcmychart.com/mychart/ - will it work?

• Why do I get "403 Forbidden" error when I'm on a 3G connection?

  When I'm on wifi, I don't seem to have this problem. That's what I see on the screen:

  Access denied.

  Technical description:

  403 forbidden - you are not allowed to

  communicate with the requested

  resources.

  It is possible, or the server does not allow mobile browsing.

  Have you tried other browsers (dolphin HD, Miren) to see if the problem

  persists?

  On Friday, 15 July 2011, at 20:56, orlando.terte

• I can't open my email on Firefox, it works on explore. When you go to the page I get this message "the requested URL /hunter/ajax_login/redirect.php was not found on this server."

  Question
  I can't open my email on Firefox, it works on explore. When you go to the page I get this e message "the requested URL /hunter/ajax_login/redirect.php is not found on this server."

  Reload Web pages, and ignore the cache.

  • Hold SHIFT and click reload.
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Cmd + Shift + R' (MAC)

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

• Cannot log on to Windows 7 after passage of the field to the Working Group

  Windows 7 Pro x 64

  I tested the Windows Server software, so I've been using the user account is a domain administrator account. Went back to the task force, forgetting that I had disabled the local Admin account and deleted my local computer account. Now I can't log in with credentials... Any ideas?

  Windows 7 Pro x 64

  I tested the Windows Server software, so I've been using the user account is a domain administrator account. Went back to the task force, forgetting that I had disabled the local Admin account and deleted my local computer account. Now I can't log in with credentials... Any ideas?

  Please note that this information is only for the use of to regain access to the system that you are allowed. These steps are not tolerated or supported by Microsoft or one of their staff and have no consent of any person of Microsoft or relationship to one of its intellectual property, it is a practice recommended or better recover password. That being said, if you don't know the system, it is illegal and you will face criminal charges, execution of these actions or worse in a professional environment which you are not the administrator. This is a hacking method, so you must have a prior consent or authority legal or rights on the system that you compromise. It is only for the purpose of peer education in the technologies of Information about learning and has no intention to provide malicious operations.

  Basically... If you are caught using it when you shouldn't be, you are busted and yourself! Microsoft do not have it as a recommended practice of password recovery... then you're on your own for any damage you do to the operating system for which is supported is in favor.

  There is not much to him... that you copy CMD to SETHC... with a backup of SETHC to replace the original SETHC to cover the backdoor.

  Get a linux boot CD, I use backtrack live cd bootable.... (DOES NOT WORK WITH ENCRYPTED DISKS) Use the shell! =) http://www.backtrack-linux.org/

  Note also that this does not work for domain controllers.

  Start on the Live of Backtrack distribution

  Open a shell (terminal) also known as the command line for Linux interface.

  Create a directory to mount the NTFS partition that has your Windows Installation.

  mkdir/mnt/directorynamehere

  Mount the partition device/dev/sda or sda1 or the sda2 know partitioning for your system... sda1(partition 2) sda (partition 1)... etc.

  Mount-t ntfs 3 g/dev/sda/mnt/directorynamehere o - force

  Navigate the paths... They are case-sensitive. This is the = linux)

  CD/mnt/directorynamehere/WINDOWS/system32

  Copy a backup of Sethc.exe and replace sethc.exe with cmd.exe

  CP sethc.exe sethc.exe.bak

  CP cmd.exe sethc.exe

  Reboot the system... to the login screen, press SHIFT 5 times. Sethc.exe is more commonly known as "sticky keys".

  NET user administrator * / Active: Yes

  Enter the new password of administrator to the guest and you connect with the administrator account to the login as usual prompt after the closure of the command line.

  Once again, you can get in trouble serious to do it in a professional environment... This should be the last resort for sensitive recovery times. Keep this in the laboratory or at home... You hold yourself is legally responsible for your actions... but it is the way of the ninja around the use of a recovery disk to repair the local computer user passwords. This only works on Local PC. Don't try this on a domain controller...

  Technology is dominated by two types of people: those who understand what they do not and those who manage what they do not understand. -Archibald Putt (Bill Putt)

• Cannot install clean Windows 8.1 get pick up the product key from the BIOS

  I have Acer S3-391 with a pre-installed 8 Win. First, I thought that I would like to downgrade to Win 7 Pro as I am used to Win 7. So, I

  remove the recovery partition from Acer Windows 8 on my hard drive and installed Win 7 Pro (with my own product key) on this subject. Also, I've updated to version 2.17 UEFI BIOS.

  Now I decided to reinstall Win 8 on my laptop, but I am running into a problem:

  As I deleted the original recovery partition which included all the bloatware is it came with, I use a Windows 8.1 cleaning ISO image trasnferred a FAT32 formatted USB flash drive. It's actually an ISO Windows 8.1 Professional, but I added the file 'ei.cfg' "basic" settings and "OEM" inside. So he installed a clean Windows 8.1 with UEFI BIOS setting, but it will not pick up a product key from the UEFI BIOS. It assigns a generic key and I can't activate it with Microsoft.

  Any suggestions to make it meet on the embeded BIOS product key without ordering a recovery DVD set for $45 at Acer?

  Thank you.

  You're right, it comes with 8.0 OEM. Last night, I found Win 8.0 ISO, modified with the folder $ $OEM and activated!

• Cannot log on my laptop without hitting F5 (as the starter), F8 and then the last good known Configuration

  When I turn on my laptop, the login page happens, but when I enter my password, it just re-boots. Then, he returned to the login page, where it does the same thing. So, it just goes back to the login page again and again and again. I tried restoring the system repeatedly.

  The only way I can connect on my laptop is by pressing F5 when starting, F8 then, last known good Configuration. I do everytime I turn on my laptop! It is very annoying. If I download anything, it saves it, but whenever I upgrade my web browser, upgrade disappears the next time I turn on my laptop.

  Backup your data and do a Windows factory restore.

  Most laptops and many OEM desktop computers (HP, Sony, etc.) come with a picture of factory restore on a special partition on the hard drive. The factory restore process is normally called by pressing a key of function (such as F11) to start the computer. There will be a message as to what function key press the screen when you start your computer. You can also consult the manual of your computer or the computer mftr.'s site, or contact technical support to learn how to restore your computer if you plant from each computer mftr. He does it differently - sometimes even between models.

  These machines also generally have a utility to create physical recovery disks in case the hard drive needs to be replaced or the factory restore image is somewhat damaged. If you have not created the recovery image recovery physical and/or damaged disks, contact technical support of computer mftr. to order a set of recovery disks. It is normally very expensive, around $20-25. MS - MVP - Elephant Boy computers - don't panic!

• haveback upward through windowsliveonecare for computer, external hard drive wentdown and now wantto get back to the top but new computer does not recognize the direct care

  drive external upwards using a windows live care, computer went down and now cannot recover save as new computer says it does not recognize backup Installer direct care. How doi recoverbackup on the new computer.
  Thank you
  E-mail address is removed from the privacy *.

  Hello

  Webcam Live One Care is no longer available.

  Please read the information contained in this thread about your problem (Steve Boots information link):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-security/i-have-uninstalled-OneCare-and-would-like-to/d2d196a5-e46f-4E48-9d94-5c217f758134

  See you soon.