Cannot make calls via laptop

Similar Questions

• SIP phones to register but cannot make calls to another

  Did I miss something in the following configs? The phones are able to register, but cannot make calls to another? Should I add to the config to be able to make calls?

  Current configuration: 8173 bytes
  !
  ! Last configuration change at 20:35:57 UTC Tuesday, February 2, 2016 of wachter
  !
  version 15.4
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  no password encryption service
  !
  hostname KCC-CUCME-2921
  !
  boot-start-marker
  boot-end-marker
  !
  !
  ! type map necessary for vwic/slot-slot 0/0 control
  logging buffered 51200 warnings
  enable secret 5 $1$ fner$ un2VRxsPt6gy418Fm/tHz.
  !
  No aaa new-model
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  IP VOICE dhcp pool
  network 192.168.2.0 255.255.255.0
  4.4.4.4 DNS Server 8.8.8.8
  default router 192.168.2.1
  option 150 ip 192.168.2.1
  Infinite rental
  !
  !
  !
  IP domain name kccoring.local
  IP cef
  No ipv6 cef
  Authenticated MultiLink bundle-name Panel
  !
  !
  !
  !
  !
  !
  CTS verbose logging
  !
  Crypto pki trustpoint TP-self-signed-1027156387
  enrollment selfsigned
  name of the object cn = IOS - Self - signed - certificate - 1027156387
  revocation checking no
  rsakeypair TP-self-signed-1027156387
  !
  voice-card 0
  !
  !
  !
  voip phone service
  list of approved IP addresses
  IPv4 192.168.0.0 255.255.0.0
  h323 connections allow h323
  allow connections h323 to SIP
  allow connections sip h323
  allow sip to sip connections
  Fax protocol t38 ls-redundancy version 0 0 hs-redundancy 0 help none
  SIP
  binding control source-interface GigabitEthernet0/0.20
  bind media source-interface GigabitEthernet0/0.20
  Registration Server expires max 600 min 60
  !
  voice class codec 1
  preferably 1 codec g729r8
  g711ulaw codec preference 2
  iLBC codec preference 3
  !
  !
  !
  !
  Global voice registry
  FMC of fashion
  source-address 192.168.2.1 port 5060
  Max - dn 25
  Max-pool 25
  Zone 8
  Flash TFTP-path:
  create the profile synchronization 0042525408078253
  !
  interface GigabitEthernet0/0.20
  encapsulation dot1Q 20
  IP 192.168.2.1 255.255.255.0
  !
  interface ISM0/0
  IP unnumbered GigabitEthernet0/0.20
  IP virtual-reassembly in
  rescue service module
  service-module ip 192.168.2.5 address 255.255.255.0
  Service-module ip default gateway 192.168.2.1
  !
  interface GigabitEthernet0/1
  no ip address
  Shutdown
  automatic duplex
  automatic speed
  !
  interface ISM0/1
  no ip address
  !
  interface Vlan1
  no ip address
  !
  IP forward-Protocol ND
  !
  IP http server
  23 class IP http access
  local IP http authentication
  IP http secure server
  IP http timeout policy slowed down 60 life 86400 request 10000
  !
  IP route 192.168.2.5 255.255.255.255 ISM0/0
  !
  !
  !
  flash TFTP server: kern2.78xx.11 - 0-1 - 11.sbn
  Server TFTP flash: kern78xx.11 - 0-1 - 11.sbn
  flash TFTP server: rootfs2.78xx.11 - 0-1 - 11.sbn
  Server TFTP flash: rootfs78xx.11 - 0-1 - 11.sbn
  flash TFTP server: sboot2.78xx.11 - 0-1 - 11.sbn
  Server TFTP flash: sboot78xx.11 - 0-1 - 11.sbn
  Server TFTP flash: sip78xx.11 - 0-1 - 11.loads
  Flash TFTP server: its
  Flash: copstart.sh TFTP server
  Flash: load36213.txt TFTP server
  Flash: load621.txt TFTP server
  Flash: load622.txt TFTP server
  Flash: load623.txt TFTP server
  access-list 23 allow 10.10.10.0 0.0.0.127
  !
  control plan
  !
  !
  Voice-port 1/0/0
  !
  Voice-port 1/0/1
  !
  voice-port 1/0/2
  !
  Voice-port 1/0/3
  !
  !
  !
  !
  !
  MGCP behavior considered range tgcp only
  MGCP comedia-role behavior no
  disable the behavior MGCP comedia-check-media-src
  disable the behavior of MGCP comedia-sdp-force
  !
  profile MGCP default

  go to respective voice register pool and configure ' no figure collect kpml

  example of

  vocal range pool 1

  No kpml transferred to numbers

  Codec to g711u

  reset

  Then go to global registry of telephone communications and perform without creating a profile and create profile

  BR,

  Nadeem Ahmed

  Please note all the useful post.

• I can receive but cannot make calls from Mac

  Hello

  I try to have calls using my iPhone connected to my MacBook Air, but I have this message "your iPhone should use the same iCloud and FaceTime account.". This is something that surprises me because I can receive calls from my MacBook, but I can't make calls from my MacBook. There's someone who have / had the same problem?

  Thank you

  CO

  OS X El Capitan: use your Mac to make and receive phone calls

  Make calls

  FaceTime: Enter a phone number in the search field and then click the Audio button or click on Audio to see your recent calls.

• DEFY: Cannot make calls...

  Hello

  I just bought Defy and I think that it is large, has many interesting features, but it does not call...

  About 10 minutes after it's turned on, I can't make all the calls (from widgets, dialer, contacts...). As soon as I press the dial button, a pop-up says "call time 00:00. And then the call is terminated.

  So I decided to 'factory reset '. But even after factory reset, this question is reproduced.

  I have attached two files: one is the journal when I can make a call and the other is there is not possible to make calls.

  A fact interesting, is that each time I start up (or factory reset) the phone, I can make calls for 10 minutes (approximately). After this time, if I want to call again, I have to start up the phone once more.

  To receive calls/SMS, it works fine.

  I think this phone is great, and I don't want to give it up.

  Can someone help me please?

  Thank you.

  I just found the answer.

  The problem is how Android deals with 'Blocking' and 'call forwarding '. If you try to change the settings, you can never reset these settings again...

  I tried to use my SIM card from mobile phones very simple, and all show me the message "you can not call so that the call blocking is active... ». But I never changed the settings...

  This also occurs with other suppliers of Android.

  The only solution is: go to your company and ask them to change your current SIM card to a new (not your line number, just the SIM card). And do not use the "call forwarding" and "call blocking" in Android

• Cannot make calls

  I'm sorry, I'm so much distress that I want to cry. I just got my phone on April 4. Initiall, I have no problem receiving calls and shouting. All of a sudden, I'm not able to scream. However, I am able to receive calls. What do I do? Can someone please please help me? T ^ T

  Yes, try airplane mode and the thing.

  If it does not try to restart your machine in safe mode.

  Press and hold the power botton > press and hold Power Off a message "Restart in safe mode" press Ok and then try to make a call. Just restart your device, and I will come back to normall.

  If this does not work then try

  1. turn off your device. Then remove the sim card (try cleaning the sim card) and leaving the powerd device off wirhout a sim card inserted for about 20 mins.then put the sim inside and power and then try to make a call.

  2. If nothing works, try to download PC companion on your computer or your laptop and do a repair software

• Microphone on TO will not reactivate what cannot make calls from

  newly purchased SE [3 weeks] has all of a sudden today mic on mute - will not turn on!  Callers can't hear me and I can't make outgoing calls.  Any help is greatly appreciated.  Thank you

  First of all, try to force reboot the phone by holding down the button sleep and home for 10 seconds, until the call logo comes back again. You won't lose data, but it can cure a few glitches.

  If this does not work, set it back to factory settings and restore it again form backup, explained in this article:

  Use iTunes to restore your device to factory settings - Support Apple iOS

  If it does not, you will get the phone repaired.

  Launch a service request

  Find an Apple authorized service provider

  Make an appointment at the Apple Store

• Cannot make calls from

  OK, so I'm new to Skype, I did the profile, it is 80%, I added a subscription - he says still Skype credit sucks do not know if it is normal, but I can't make a call... the person should add u before you can call?

  Hello
  Unfortunately you have not provided sufficient information to enable us to answer you. Please indicate your request in detail.

  1. What subscription you have?

  2. in which country are you trying to call?

  3. you try to call from Skype to Skype, a fixed line or a mobile phone?

  Thank you.

  TIME ZONE - US EAST. LOCATION - PHILADELPHIA, PA, USA.
  
  I recommend that you always run the latest version of Skype: Windows & Mac
  
  If my advice helped to solve your problem, please mark it as a solution to help others.
  Please note that I usually do not respond to unsolicited private Messages. Thank you.

• Cannot make calls to the cell, only Skype

  Everytime I try to dial a number, Skype appears as the default. I could not find the settings to change the phone back on to cell, seems that Skype just took over the phone. For crying out loud on cell phone I had to uninstall Skype. Help! I want Skype WiFi finally.

  Thank you

  Cam

  PS I am running Android 2.1 on a Motorola XT720

  You then reset the default values for the dialer and Skype
  
  manage settings - applications - Skype - reset default values
  and dialer - reset default values
  
  This is what is supposed to control

• When I try to make a video call via Skype. I can see and hear the people on the other end, but they cannot hear me.

  I just got a new laptop with the latest softwear Microsoft and McAfee. Everything works fine EXCEPT when I try to make a video call via Skype. I can see and hear the people on the other end, but they cannot hear me.  The microphone settings seem to be OK.  the antivirus that was installed would cause the problem?  I tried to ask Skype. but do not seem to be able to communicate with them...

  The following support Skype may have something that will help: http://support.skype.com/en-us/category/CALL_QUALITY/

• Sierra of MacOS - Siri cannot make voice calls.

  Hi guys,.

  Siri is supposed to be able to make phone calls via the iPhone, the Mac, in the Sierra de MacOS?

  Cause I can make phone calls (not the Facetime calls) fine if I use the Facetime on Mac app and click on the phone number, I want to call, or if I take a certain number of Contacts. But if I try to open Siri and make a voice command to "call X", he always tries to do through Facetime. Which means he's trying to make a Facetime call instead of a voice call normal.

  Is this a bug or missing feature? Is there a fix or a workaround for it? I wish I could use Siri on my Mac, just as I do on the iPhone.

  I observed the same behavior, so I think it's a missing feature.

  And page (below) which deals with Siri on Mac shows a command "FaceTime", but not a "Call" command  (As I say, I used the "Call" command and observed the same behavior you did.)

  Use Siri on your Mac - Apple Support

• Cannot make or receive phone calls after the upgrade to iOS 9.3

  Can't scream: cannot make or receive phone calls after the upgrade to iOS 9.3

  SOLVED

  Went into settings,

  Cell phone,

  Cellular data options,

  then change the setting to EnableLTE OFF,

  It's for my at & t att, iphone 6 s

  No joy for me.  I can't make calls, but I can not receive or use call forwarding.  So frustrating!

• Hello. Dear Apple, I just want to know y iPad 2 Air cannot make phone call or what app or SIM card text have number can you improved

  Hello. Dear Apple, I just want to know y iPad 2 Air cannot make phone call or what app or SIM card text have number can you improved

  Thank you

  There is nobody here from Apple, just we users.

  WhatsApp has not been developed for the iPad. Ask the developers.

  The iPad can't make a phone call because it is not a phone.  But there is a choice of applications such as Skype to make calls over the internet.  The SIM card in an iPad has data only.

• I can see the webcam on my Dell Latitude D630 laptop, but cannot make it work on Skype... This isn't seeit. How to activate the webcam to use?

  I can see the webcam on my Dell Latitude D630 laptop, but cannot make it work on Skype... This isn't seeit. How to activate the webcam to use?

  Hello markward4905

  You should be able to download the drivers from the website of the manufacturer of your web cam.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer:www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• BlackBerry smartphones I can make calls but cannot receive anything?

  Sunday night my friend tried to call me, but my phone never rang, and when he sent me a text message telling me that I called my phone from the home line. And when I called him a busy signal? but I can still make calls phone just can't receive them. As the title of the post is. Nobody knows what is happening, or it's never happened to you? I have never dropped my phone in a place dry or wet area also and on the battery litmus paper is red, but which does not affect the phone or just the battery?

  in any case if someone has or has had the same problem and knows what it takes to this topic please answer as soon as POSSIBLE.

  Thank you

  Nick

  OK, your phone is a Blackberry 8130, in any case, go to the store and ask to solve the problem, if they have no solution, ask to change device

• SX20 Quick Set registered but can not make calls

  We have several new SX20 units, two of which I installed and registered via SIP with UCM (v8.6.2, required a pack of devices).  I can make a call to the SX20 since a regular IP phone (7961 - SCCP), answering the call to unity of telepresence and continue a conversation only one voice.  However what composition of the SX20 the other SX20 or any other IP phone it briefly displays "call for binding", then it goes immediately to the "call was disconnected.  I tried just the DN 4-digit, as well as the SIP URI of numbering.  Here is a part of the log output of command line for the sx20 indicating the call SIP is rejected with a 403 forbidden message.

  It is worth noting that before these devices, we have had no recorded via SIP, SCCP phone only.  At this point, these devices don't need to dial outside of our network.  I had a case open for two weeks and keep TAC is passed between the teams of telepresence and the AAU.  I told them we have never had a SIP device registered with our University Complutense of MADRID before and if there is nothing else to be configured, the answer was nothing more for internal calls only.  I'm trying to get escalated now, but thought I'd give forums a go.  Any help is greatly appreciated, and I apologize if this question is that something is ridiculously simple.

  63018.74 DATACTRL I: DataGateCfgReq(ig=7) hdlc = yes

  63018.76 i: SipStack (ui = 8, s = 0) SipDialog sendInviteRejToStack (403: Forbidden)

  63018.76 msg unknown MC W: Mcfsm::handleOtherMessages() SIP_DialogFreed_Ind of SipStack

  63018.77 SipCall I: sip_call_handler::handleSIPMCallRej(8/0/-1): Appeal dismissed (cause: forbidden)

  63018.78 I: MC signalLocalReceiveCapsetChange, RemoteParticipant::signalLRCap

  63018.78 I: SipCall = appId = 8 makeOutgoingUpdate, stackId =-1, eventCookie = 1, isEmptyCap = 0, holdState = 0

  63018.74 DATACTRL I: DataGateCfgReq(ig=7) hdlc = yes

  63018.76 i: SipStack (ui = 8, s = 0) SipDialog sendInviteRejToStack (403: Forbidden)

  63018.76 msg unknown MC W: Mcfsm::handleOtherMessages() SIP_DialogFreed_Ind of SipStack

  63018.77 SipCall I: sip_call_handler::handleSIPMCallRej(8/0/-1): Appeal dismissed (cause: forbidden)

  63018.78 I: MC signalLocalReceiveCapsetChange, RemoteParticipant::signalLRCap

  63018.78 I: SipCall = appId = 8 makeOutgoingUpdate, stackId =-1, eventCookie = 1, isEmptyCap = 0, holdState = 0

  -JW

  A look at the logs on your case - looks like there is no number to call in the header AMATURES or Contact, so CUCM rejects the appeal and sends the 403 forbidden.  Note the field 'From' below - should be sip:[email protected] / * /.  What you configured as your SIP URI in your SX20?  Not that familiar with the SX20, but on my EX90 in the laboratory, there is a field of a SIP URI for that I had to enter the DN @ address >.  Anything on CUCM that would block the DN to be passed to the SX call to IP phone?

  primaryDN = 1070, cannot be called DN to determine the media... sending 403

  SIP/2.0 403 forbidden

  Via: SIP/2.0/TCP XX. XX. XX. XX:5060; direction = z9hG4bK8664f3a10726dfcdd3f6437593e431b6.1; rport

  From: "1070" tag = 123835963de850ed

  In: [email protected] / * />; tag = 1701792190

  Date: Thu, 14 June 2012 16:56:46 GMT

  Call ID:

  [email protected] / * /.

  CSeq: INVITE 100

  Allow-events: presence

  WARNING: 399 CM2 "unknown caller DN.

  Content-Length: 0 SIP/2.0 403 forbidden
  Via: SIP/2.0/TCP XX. XX. XX. XX:5060; direction = z9hG4bK8664f3a10726dfcdd3f6437593e431b6.1; rport
  From: "1070" tag = 123835963de850ed
  In: [email protected] / * />; tag = 1701792190
  Date: Thu, 14 June 2012 16:56:46 GMT
  Call ID: [email protected] / * /

  CSeq: INVITE 100
  Allow-events: presence
  WARNING: 399 CM2 "unknown caller DN.
  Content-Length: 0