Cannot modify router WRT54GS V7 of IP static

Similar Questions

• Cannot access the configuration of my router (wrt54g) page

  I can't access the page of my router (wrt54g) configuration after the installation. The router works fine, but whenever I try to connect to 192.168.1.1 it says the password is incorrect. The first time that I put up I changed the default user name and password and I thought I'd simply forgotten, so I reset the device. This time I don't change any of the default values, and I can not even log on. I have to reset it several times, and you're just annoying. Anyone know how to prevent it from happening? I thought it might be a firmware issue, but I can not find all downloads for my version of road ' rs (V8). I use a macbook pro, osx 10.9.2.

  My neighbor has pretty much the same question. Did some research and found many people with similar problems. Probably time for a new...

• Setting up Port Forwarding on router WRT54G, working with a WVC54GCA Wireless CAmers

  I have the equipment in question and you need to know a few things when it come to put in place for Internet access. Before I aske the question, however, I have the following IP addresses associated with this project: WVC54GCA - 192.168.2.102, router WRT54G - 192.168.2.1, the questions are:

  1. How do you define Port Forwarding on every element.
  2. Should the two articles have static IP addresses.
  3. Once the port forwarding is set, what is the structure of the URL to access the camera?

  Any help would be appreciated, summer tear my hair on it. Seems simple, but obviously not. I'm missing something.

  Thank you

  For port forwarding, you will first need to set the camera to a fixed LAN IP address (static).

  If your router uses the range of 192.168.2.100 thanks 192.168.2.149 DHCP servers, then 192.168.2.102 is an unauthorised fixed address.  With the Linksys routers, any fixed LAN IP address must be outside the range of the DHCP server.

  Here are the rules of use of the fixed LAN IP addresses with Linksys routers.  (Note: these rules were written for the 192.168.1.x subnet.)  Since you're using the 192.168.2.x subnet, change all addresses accordingly):

  With Linksys, routers, a fixed (static) IP LAN addresses must be assigned in the device that uses the address. If you need to enter the fixed address to the computer, printer or camera, not in the router.

  When you use a Linksys router, any fixed LAN IP address must be outside the DHCP server rank (typically 192.168.1.100 thru 192.168.1.149), and may not end with 0, 1 and 255.

  That's why any fixed LAN IP address would normally be of the order of
  192.168.1.2 thru 192.168.1.99 or
  192.168.1.150 thru 192.168.1.254
  assuming that you always use the default DHCP server line.

  In addition, in the computer, when you configure a static LAN IP address, you need to set the "Subnet mask" 255.255.255.0 and the 'default gateway' on 192.168.1.1 and "DNS server" to 192.168.1.1.  Note that some network devices can not use server proxy DNS at 192.168.1.1.  In this case, the value "DNS server" your real address of Internet DNS server (found in the router when connected to the Internet).

  It is also important that the same value static LAN IP address no two devices on your network.

  **********************

  After you gave your camera at a fixed LAN IP address, then go in "Port Redirection" in the router and configuring the ports one (or more) to the address LAN IP fixed camera.

  In order to access your camera from the Internet, you will need to either:

  (1) get a fixed Internet IP address (static) address from your ISP and configure your router to use this address, or

  (2) use a free service such as DDNS.  DDNS allows you to use a dynamic Internet IP address, but can connect you by using the same URL.

  I hope this helps.

• How to put in as a bridge wired by another router WRT54G

  I now have a provided verizon wireless router and want to use my wrt54G as a cable bridge.  Basically I want to use the WRT54G as a switch for connecting 3 elements that do not have a wireless (an A / V receiver, XBOX 360 and some storage networking).  The race is too long to have 3 connections directly to the verizon router, so I ran an and want the WRT54G to act as a hub of sorts.

  I plugged the release LAN of my router verizon at the entrance of the WRT54G, but no internet on the wired WRT54G no outputs.  I guess I need something to "bridge mode", but can not understand it.  I suspect also that I need to disable DHCP, assign a static IP address, and probably more, but I don't have a chance.

  Any ideas?   Help is greatly appreciated.

  What is the ip address of your router verizon?

  Make sure that the ip address of the router Verizon and both are the ip address of the router Linksys assume to be in the same network range. (E.g. Verizon router ip - 192.168.2.1, Linksys router ip - 192.168.2.2). Then connect the router verizon Ethernet cable to linksys router in the number in Port 1. Open the page of the Linksys router setup disable DHCP and wireless (as you say you want to 'use as a wired router wrt54G')

• How to install the WPA2-aes security on old router Wrt54G ver 6

  I need help mode WPA2 on my router, I got this router WRT54G ver 6 for several years and it works perfect only thing is that I have no security my nwireless can help them a whole? would be ppreciate it. Thank you

  Your router has the option for WPA2 Personal. You need to access the router interface so that you can select this type of security.

  Please click the link below and it will give you steps how to configure security wireless with your router:

  Title: setting up wireless security WEP, WPA or WPA2 on a Linksys ID of Article wireless router: 19073

  http://www6.nohold.NET/Cisco2/UKP.aspx?pid=80&VW=1&articleid=19073

• How to connect a second router WRT54G

  I can't get a signal through my entire House so I bought a second router WRT54G, running that the Setup disk affects only the first router so how do the other work?

  To connect two routers together, go here.

• Router WRT54G wireless does not work with the new modem

  Hi, I use my router WRT54G (Firmware version v2.02.7) on 4 computers for more than four years now, without any problems at all. However, today I had to replace my old modem with a brand new modem Speedtouch from my supplier, and although I made sure each cable has been connected properly, it just doesn't.

  The connection between my PC and the router (http://192.168.1.1) is good, but the problem must be between the router and the new modem. When I click on 'Status', he said: ""connection status: disconnected".

  After clicking on the 'Connect' button, it tells me that it "can not connect to the PPTP serverbe"

  Help, please

  Hi Matt,

  Although the resolution of this problem was a little simpler, I still thank you for your answer.

  The neighbor boy came up with the following response:

  «It just check the Type of Internet connection, cause you got an old type of modem before.» It will probably be set to PPTP. If this is the case, simply change it to "Automatic DHCP Configuration", click on "Save Settings" and everything should be ok then"

  And he was right!

  I am so happy

  BR,

  Niqui

• Router WRT54GS WET54G bridge question, the bridge to connect to a wired router?

  Hi all

  I have a wireless - g LAN using a WRT54GS router.  The existing wireless devices on the local network are 2 PCs, a TiVo unit (using the TiVo wireless adapter) and 2 WET54G Wireless bridges.  A bridge connects ethernet wired to a network printer.  The other bridge connects by ethernet cable to a reader Blu - Ray Sony BDP-S550.

  Security is WPA2-AES.  so far this works well, believe it or not, but I grew a lot older, making it happen.

  Now, here's what I would do: I would like to add another device LAN cable where the second bridge WET54G connects to the Blu - Ray player.  The bridge has only an ethernet cable connection, so I have to find another way to get the two devices connected to the wireless LAN.

  I have two other devices LinkSys, kicking around here that I can use.  One is a BEFSR41 wired router.  The other is a WAP54G Wireless Access Point.   If I can use one or two of those who in some way, I won't have to buy another camera.  It is the order of the day so far.

  Right now it looks like this:

  Router WRT54GS wireless wire WET54G bridge entry WAN router BEFSR41 son to two LAN devices.

  I have problems performing this work, assuming that it can still be done.  Can I get this config to work, or what I need to add the Access Point where the bridge is now, or...?

  Thanks for your time,

  Big Al Mintaka

  You already have a network working with your existing devices. What you're trying to include in your network is possible and can be done. Rather than plug the cable of the WET54G to the WAN port on the router, connect the cable to the router's LAN port. Disable DHCP and change the LAN ip address in the range of your existing network. It should work.

• Cannot modify only directory attributes of reading, all the readers all the directories.

  Original title: cannot modify only directory attributes of reading, all the readers all the direcotries.

  For some reason now all directories are read-only. I have a check only reading tab, it goes through the process of change in all files in the subdirectory (I put their scrolling), click ok. But when I go in the directory again that reading is only check again. It is on my C: dirve all directories and all the other readers, including empty directories. Any suggestion would be appreciated. Thank you
  Bit defender shows no problem.
  SdS49r

  Hi SdS49r,

  I would like to ask you a few questions to better understand:

  (a) you connected to the administrator account? because you do not have the \n(Assurez-vous if you are not in the administrator account

  (b) don't you make changes on the computer?

  (c) have you created the file read-only?

  (d) what message do you get while changing the read-only attribute?

  (e) have you been able to change the attributes previously in your computer?

  You can scan your computer, then follow the steps in the link: http://www.microsoft.com/Security_Essentials/

  Try the system restore, it restores the computer to its point earlier while it was working fine.

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  
  Hope this information helped!

  Thank you, and in what concerns:

  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• I have an account but cannot modify/use the tools.  I went from computers a week ago.  Help, please.

  I have an account but cannot modify/use the tools.  I went from computers a week ago.  Help, please.

  It should not, but you will need to download the right software to use. Adobe Acrobat Reader is what you are currently using. This is why you don't have the tools you are used to.

  Adobe Acrobat (not Reader), that's what you signed up for. He has the tools, you need and are a completely different, even if application you may have initially subscribed by using Adobe Acrobat Reader.

• Cannot modify available phone model union

  I used the free model, which is the union and pretty much done with office management; However, no matter what I did, I couldn't change phone available - would really appreciate if someone can help me - thanks

  Cannot modify the Master Page, so if the homepage is blank and master applied includes the content of the page then we cannot change this. You can publish the same site British Colombia as a place to test, just to isolate the problem.

  Thank you

  Sanjit

• Acrobat Reader DC - cannot modify or delete pages

  Acrobat Reader DC.  Cannot modify or delete pages.

  Hi luciek42334613,

  Are you sure that you open the PDF file in Acrobat Standard DC not in Acrobat Reader ms?

  To change the PDF files, you need to open it in Acrobat Standard DC.

  Kind regards
  Nicos

• WARNING: Cannot modify header information - redirects with the server behaviors

  I know it's an old question, but I can't find the answer.  I get an error when you use the update of the server behavior redirects the Add record  I get the error message: warning: cannot modify header information - headers already sent by (output began to...)

  I deleted as much white space before the header() function and I still get the error.

  <? php require_once('.. / Connections/Old4thDB.php');? >

  <? PHP

  If (! function_exists ("GetSQLValueString")) {}

  function GetSQLValueString ($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")

  {

  If (via PHP_VERSION < 6) {}

  $theValue = get_magic_quotes_gpc()? stripslashes ($TheValue): $theValue;

  }

  $theValue = function_exists ("mysql_real_escape_string")? mysql_real_escape_string ($TheValue): mysql_escape_string ($theValue);

  Switch ($theType) {}

  case 'text ':

  $theValue = ($theValue! = "")? « " ». $theValue. "" "": "NULL";

  break;

  case "long":

  case "int":

  $theValue = ($theValue! = "")? intval ($TheValue): 'NULL ';

  break;

  case "double":

  $theValue = ($theValue! = "")? doubleVal ($TheValue): 'NULL ';

  break;

  case "date":

  $theValue = ($theValue! = "")? « " ». $theValue. "" "": "NULL";

  break;

  case "set":

  $theValue = ($theValue! = "")? $theDefinedValue: $theNotDefinedValue;

  break;

  }

  Return $theValue;

  }

  }

  $editFormAction = $_SERVER ['PHP_SELF'];

  If (isset {}

  $editFormAction. = « ? ». htmlentities($_SERVER['QUERY_STRING']);

  }

  If ((isset($_POST["MM_update"])) & & ($_POST ["MM_update"] == "UpdateVarietyForm")) {}

  $updateSQL = sprintf ("setting a DAY various SET varietyName = %s varietyType = %s varietyAlphaAcidGeneral = %s, varietyBetaAcidGeneral = %s, varietyOld4thAA = %s, varietyOld4thBA = %s, varietyEssenOil1 = %s, varietyEssenOil2 = %s, varietyEssenOil3 = %s, varietyEssenOil4 = %s, varietyEssenOil5 = %s, varietyEssenOil6 = %s WHERE variety_id = %s",

  GetSQLValueString ($_POST ['varietyName'], "text").

  GetSQLValueString ($_POST ['varietyType'], "text").

  GetSQLValueString ($_POST ['varietyAlphaAcidGeneral'], "text").

  GetSQLValueString ($_POST ['varietyBetaAcidGeneral'], "text").

  GetSQLValueString ($_POST ['varietyOld4thAA'], "text").

  GetSQLValueString ($_POST ['varietyOld4thBA'], "text").

  GetSQLValueString ($_POST ['varietyEssenOil1'], "text").

  GetSQLValueString ($_POST ['varietyEssenOil2'], "text").

  GetSQLValueString ($_POST ['varietyEssenOil3'], "text").

  GetSQLValueString ($_POST ['varietyEssenOil4'], "text").

  GetSQLValueString ($_POST ['varietyEssenOil5'], "text").

  GetSQLValueString ($_POST ['varietyEssenOil6'], "text").

  GetSQLValueString ($_POST ["'recordID"], "int"));

  @mysql_select_db ($database_Old4thDB, $Old4thDB);

  $Result1 = mysql_query ($updateSQL, $Old4thDB) or die (mysql_error ());

  $updateGoTo = "varieties.php";

  If (isset {}

  $updateGoTo. = (strpos ($updateGoTo, '?'))? « & » : « ? » ;

  $updateGoTo. = $_SERVER ['QUERY_STRING'];

  }

  header (sprintf ("location: %s", $updateGoTo));

  }

  @mysql_select_db ($database_Old4thDB, $Old4thDB);

  $query_rsUpdateVariety = "SELECT * FROM variety";

  $rsUpdateVariety = mysql_query ($query_rsUpdateVariety, $Old4thDB) or die (mysql_error ());

  $row_rsUpdateVariety = mysql_fetch_assoc ($rsUpdateVariety);

  $totalRows_rsUpdateVariety = mysql_num_rows ($rsUpdateVariety);

  ? >

  Am I missing other setups/configurations that could cause this?

  You forgot the most important part of the error message. "Output started at..." tells you where the production has started, guiding you to correct the error.

  The most common cause of this error is a space outside of an include file PHP tags. Most likely guilty is one or more new lines after the closing PHP tag in Old4thDB.php. Remove the closing tag PHP in this folder will be probably solved the problem.

  Another possible cause is using the BOM (byte order mark) on a PHP page. Make sure that the check box for the BOM is deselected in the Save dialog box.

• ORA-01779: cannot modify a column that is mapped to a table not preserved key

  Hello
  I'm doing update join with the type of activity of lag on my 10.2.0.3
  Here's a simple test case:
  

  create table test1 (id1 number, id2 number, before varchar2(10), after varchar2(10));
  
  alter table test1 add constraint pk1 primary key (id1, id2);
  
  SQL> insert into test1 values(1,1 , 'a','b');
  
  1 row created.
  
  SQL> insert into test1 values(1,2 , 'b','c');
  
  1 row created.
  
  SQL> commit;
  
  
  
  
  select * from test1;
  
    ID1        ID2 BEFORE     AFTER
  ----- ---------- ---------- ----------
      1          1 a          b
      1          2 b          c
  
  
  
  update
   (select src.before src_before, tgt.before tgt_before from test1 src , test1 tgt 
      where 
      src.id1 = tgt.id1 
  and src.id2 = tgt.id2 + 1 )
  set tgt_before  = src_before
  /
  
  set tgt_before  = src_before
      *
  ERROR at line 2:
  ORA-01779: cannot modify a column which maps to a non key-preserved table

  Problem with tgt.id2 + 1, but I need that in my logic, so how do I get around this?
  Concerning
  GregG
  
  Published by: 3 Sep 2012 GregG 13:23
  removed and src.id2 = 1
  
  Published by: 3 Sep 2012 GregG 13:31
  Corrected as pointed by Dom

  Have you tried something like this:

  UPDATE test1 a
  SET    a.before = (SELECT b.before
                     FROM   test1 b
                     WHERE  b.id1 = a.id1
                     AND    b.id2 = a.id2 - 1)
  WHERE EXISTS (SELECT 1
                FROM   test1 c
                WHERE  c.id1 = a.id1
                AND    c.id2 = a.id2 - 1)
  

• SQL error: ORA-01779: cannot modify a column that matches a key examine

  Hi all
  
  The requirement is that I have two tables s_party_d and S_CONTACT_d. the need to update the column name with FST_NAME | ',' | Last_name when column rowid in both tables are equal. I used the query previously below: -.
  
  Update
  (select
  E1. Name,
  e.FST_NAME,
  Select
  Of
  s_party_d e1,
  E S_CONTACT_d
  where
  E1. Game of ROW_ID = e.ROW_ID)
  name = FST_NAME | ',' | LAST_NAME;
  
  But I get the error message when executing the query
  
  Error in the command line: 31 column: 3
  Error report:
  SQL error: ORA-01779: cannot modify a column that is mapped to a table not preserved key
  01779 00000 - 'impossible to change a column that is mapped to a non-preserved table at key'
  * Cause: An attempt was made to insert or update columns in a join finds out who
  map to a table not kept the key.
  * Action: Change the directly underlying base tables.
  
  Can U please tell me why this error and how to solve?
  
  Thank you
  Mathon

  Mathon wrote:

  So, I have to look into some other method... I can't achieve this using a single update statement...

  Well, no matter what you do you need to decide what FST_NAME | ',' | Name to use. As I already pointed out for each line of the line of the s_party_d table there are several rows in table S_CONTACT_d. Again, you must yo decide what S_CONTACT_d table row you want to use. For example:

  update s_party_d e1
     set e1.name = (
                    select  max(e.FST_NAME) ||', '|| max(e.LAST_NAME)
                      from  S_CONTACT_d e
                      where e1.ROW_ID=e.ROW_ID
                   )
   where e1.ROW_ID in (
                       select  e.ROW_ID
                         from  S_CONTACT_d e
                      )
  /
  

  SY.