Cannot move the object

Hello

I scanned a drawing that I place on it's own layer from the office, he was directly drawn, expanded and consolidated.

When I select to move it, either using the arrow keys or the transformation/move command, I get a message that I've ever seen before "cannot move the objects. "The requested transformation would make some objects fall completely the drawing area.

Could someone explain what it means?

Thanks for any advice.

Occurs usually when you have a wandering point or a selected guide. Zoom out all the way. You have something that is going to the grey area (outside the mount table) completely.

Tags: Illustrator

Similar Questions

  • Help, please. New CS 4 error: cannot move the objects. the requested transformation would make some objects fall completely the drawing area.

    I know that this is not a 'new' error message, but I never got on the previous versions of Illustrator. I just upgraded to CS 4 and get it now on almost all files when I try to move an object in any direction. Not that it matters, but these are files that were created in previous versions of Illustrator and I never had this problem. I followed the instructions of similar positions without success. I zoomed way toward the edge of the art Council: there is no hidden layers, objects or guidelines, no persistent points of the guidelines are erased, or objects of any kind anywhere near the edge of the box art (which, I know it, is huge compared to the size of my working paper of 11 x 17)

    What Miss me?

    In addition, on occasion, when I CAN move an object (usually a JPG or PDF image that I placed in the document), the image disappears. I think it is always 'there' even if I'm not. Any suggestions?

    Is it possible that your keyboard Increments area struck a giant number? Check under general preferences. (removal of preferences would also reset it)

    Also, to double check - when you zoom in completely to where you can see the limits of the editing table (so you're zoomed out to like 5% or something like that) UNlock all United Nationshide all and select all, is your framework of selection within your page?

  • CS6 - cannot move the object to new layer via dot

    I can't drag a selected object to another layer via the point of color in the palette layers to the CS6.

    CS6LayersDrag.png

    I've been doing that since I can remember. Is it some new CS6 default setting I'm missing?

    You must turn off 'show layers only' in the range of panels.

    I had the same problem.

  • Cannot move/select objects with the tool of selection except if clicked on exactly in the Center.

    Very frustrating. Someone knows how to fix this? I reset all my settings and it's always the case. If I click in the exact Center of the object, I can click and drag as usual, however clicking anywhere else on the subject do not select or move the object.

    Take a look if in preferences > selection & anchor display the "Object selection by path only" option is checked.

  • Cannot move the nhs mail in the trash more mammals

    Use mail nhs voicemail for years. In recent weeks impossible to delete the mail I receive

    the error message that it cannot move the message to the trash. Works great on iMac, but not on the Macbook.

    El Captain running on both systems. Can anyone help?

    Thank you

    Have you tried CTRL/click on the mail... then choose 'delete '.

  • Cannot move the element 'name.extension"in the Trash because it cannot be deleted. I restarted the finder and still got the same message

    Cannot move the element 'name.extension"in the Trash because it cannot be deleted. I restarted the finder and still got the same message. little help?

    Why do you want to delete?

    Where is located? (This file)

    What is it?

  • Cannot move the files to the trash - just keeps turning

    Original title: trash

    I cannot move the files to my trash - just keeps turning... but does not connect. Have tried empty, but said: "to have 0 in the trash.

    Hey golfer Mi,.

    1. what type of files you delete?

    2. were you able to move the files to the trash before without any problem?

    3. did you of recent changes to the computer?

    Step 1:

    You can try the following steps and check if it helps.

    You can try to drag a file it and check if it appears in the Recycle Bin

    a. right click on the Recycle Bin and select Properties.

    b. disable the option "do not move files to the Recycle Bin. Delete file immediately when it is deleted. "and check.

    Step 2:

    You can also try to create a new user account and check the issue.

    Create a user account

    Hope this information is useful.

  • Problems to install Lightroom "ERROR: DF024: cannot move the file", etc..

    When I try to install Lightroom CC I get an error message "Encounter errors during installation (7)", followed by "ERROR: DF024: cannot move the file in" C:\Program Files (x 86) \Common Files\Adobe\Installers\adobeTemp\...".etc.»» He then told me that the file is used by another program, but nothing else is open.

    [Moved from the endorsement, general, all Adobe forums Lounge for a specific support by product - moderator forum]

    [Edited the title to improve clarity - Moderator]

    I saw another thread on a similar problem. He says to disable anti-virus software and that worked perfectly.

  • I opened a high-density .tiff file in photoshop, but I can't move the object

    I opened a high-density .tiff file in photoshop, but I can't move the object

    Chances are that the image is the same size as the document. You can either add Web Image > canvas... size , use the crop tool and do drag outwards to create more space, or reduce the size of the image ctrl-t or command-t then scale the image inward.

  • Cannot move the anchor points using the Subselection tool? (CS5)

    Hey.
    I experienced an intermittent problem in Flash CS5, where sometimes I can't push anything using the Subselection tool. Sometimes, I can, but most of the time I can't and I don't know why.

    I can still click-and - drag points (or multiple points/paths), but I can't push the keyboard.

    Any ideas?

    My guess is that the item is grouped and you are inside the publishing group? For some reason any in this case you cannot move the points in this way.

    Separate the Group and try again. Sorry that's the only answer I know.

  • DW cannot convert the < object > tag created with swfObject 2

    I have a Flash video on an "integrated" static html page using the swfObject method 2. When I open the page in DW CS3 I get this error message:

    "This page contains < object > tags that may not work properly in the most recent versions of Internet Explorer. DM cannot convert the < object > tag. »

    Page plays the video the two local system on the server.

    this test page is here: http://www.rjdutton.com/about_movSWF2.html

    Relevant source code is:

    --> < object classid =... etc and

    --> < object type =

    Since this is the only code on the test page that refers to an object tag.

    The on-board Flash I have on the website (home page and the who we are page) now are incorporated using < embed > via Flash CS3 (AC_Run active content), but this method does not validate. the swfObject method 2 valid.

    I'm working on a Mac. Could someone check the page on the victory of the IE and see if the video is running?

    Can I ignore the message 'error' of Dreamweaver?

    Thanks - Susan

    I think that you will have no problem ignoring the message.

    Ken Ford
    Adobe Community Expert - Dreamweaver/ColdFusion
    Adobe Certified Expert - Dreamweaver CS3
    Adobe Certified Expert - ColdFusion 8
    Fordwebs, LLC
    http://www.fordwebs.com
    http://www.cfnoob.com

  • Virtual and models - computers cannot move the VM in the folder "operation is not supported on the object."

    Hey everybody,

    We are running vSphere 4.0. During the whole period that we used vSphere, we use vApps and Resource Pools hosts and Clusters to organize and manage the virtual machines used by our production team and test. From what I understand, this can be semantically incorrect (see: http://virtualizationreview.com/blogs/everyday-virtualization/2010/10/vsphere-folder-organization.aspx). So, I've navigated to models and virtual computers, created in folders with permissions of the user and tried to move their respective VMs to their folders... and I get the following error:

    "The operation is not supported on the object."

    So, should I go on the resolution of this or to leave things as they are?

    What are your opinions?

    Is there a right or wrong way to manage VMs of the multiple users?

    Thank you for your time and help,

    Johnathan

    Avinash21,

    Thanks for the tip.

    Move the virtual machines of the TIME solved the problem.

    When I suggest them to the root of the host, I was able to move in a user folder.

    Thanks again,

    Johnathan

  • Cannot move any object in Adobe Muse

    All of a sudden every time I try and move any object - image, text etc. box... I get this error... and when I click OK, the program stops.  Makes it really hard to actually do any work.
    Screen Shot 2016-03-19 at 2.20.50 PM.png

    I tried to uninstall Muse and put it back - I've tried it in different sites, I'm working on and I get the same error every time.  NDMI/nativeDragEventHandler TypeError: Error #1009: cannot access a property or method of an object error null reference seems to affect a lot of people, but I have not seen any real resolution... someone at - it something to recommend?

    It's Adobe Muse CC 2015.0.2.4 running on Mac OS X 10.11.3...

    Any help would be great appreciated!

    Hello

    This error comes when something's not the Drag of Mac event handler.

    Restart the machine should solve the problem.

    If the problem persists after restarting, please let me know.

    Kind regards

    Vivek

  • move the object or shift page

    Hello!

    I have a lot of files with x A4 pages.

    At the top right of the pages, there is a box with name and address.

    I can move the box?... I need to translate the box down to a few millimeters...

    Alternatively, move all the contents of the page down (not only the box...)... what I can do in javascript?

    Thank you

    Andrea

    You cannot move content selectively in a PDF using JavaScript. The only way to move programmatically, an object or a group of objects is via a plug-in of Acrobat (written in C or C++). However, you can move all the contents of the page using JavaScript by changing the harvest of your pages and media boxes. Take a look at this script, it shows how this is done. The script moves all content by an inch (72pt). If you need a different distance, you must convert the distance you want to move your content in mm at points. A point is 1/72nd of an inch and one inch is 25.4 mm.

    // move content down by a certain amount
    (function() {
        var a = this.getPageBox("Media");
        a[1] += 72;     // 72pt is 1"
        a[3] += 72;
        this.setPageBoxes({cBox: "Media", rBox: a});
        a = this.getPageBox("Crop");
        a[1] += 72;     // 72pt is 1"
        a[3] += 72;
        this.setPageBoxes({cBox: "Crop", rBox: a});
    })();
    
  • Cannot move the text in plan Vanishing Point

    For some reason any when I select some text and try to paste it into a plan of vanishing point, the selection ends up 200% longer than what it should be, and I can not move the text layer in the plan. Screenshot attached.Vanishing-Point-Problem.png

    After pasting the text (or whatever it is already copied to the Clipboard before entering Vanishing Point) in Vanishing Point, there is no reason why you cannot turn freely it adapts to your chosen size and the report l / h.  If the text or object is too big, and FT handles are outside the plane of VP, just do slip down so you can see the upper handles, to scale down and slide it in position.

    Note: when you use FT Perspective on any object (I mean outside VP), he tends to exaggerate the 'length' because that's how we would probably see the object in real life.  I have nearly the only time where I actually click right and choose one option in FT, because it's so easy and fast to Ctrl (Cmd) make dragging a corner or manage a health perspective.

    Unfortunately you get only basic FT size options and the proportions to the bosom of the VP, which is too bad, because you cannot distort your object to encapsulate apparently on a surface curve.  I added a few FT string to this text before it is applied within the VP.  I suspect that miss me a thing or two with VP, I don't use it very often, so I'd love to hear it from someone who has really under control?

Maybe you are looking for