Cannot open a file error where zip is a "compressed (zipped) folders error". Windows cannot perform the extraction.

Original title: loading with a password required

I'm trying to open a zip via windows 7.  Same error occurs on windows xp.  There is a "compressed (zipped) folders error" error  Windows cannot perform the extraction.  The destination file could not be created.

I recently got 8 deleted window and window 7 set in... I've never had a problem before

Hello

  1. Using default Windows 7 application or any other 3rd party application?
  2. What type of file you are trying to open?
  3. You try to extract the zipped file documents? If so where are you trying to save?

I suggest you try these methods and check the status of the issue.

Method 1

Try using Windows to extract the zipped files

http://Windows.Microsoft.com/en-us/Windows7/compress-and-uncompress-files-ZIP-files

Method 2
Perform the check and the boot if the problem persists.

How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135

Note: follow step 7 of section of boot KB929135 to the computer in normal mode.

Tags: Windows

Similar Questions

  • Windows cannot perform the extraction. The destination file could not be created.

    I get the above error message everytime I try to install an update to a program that I have and use daily.

    The program provider is a loss to explain why this happens, but it happens on two different computers.

    Hello Connie,.

    In general, this message occurs when the ZIP file in an area protected.

    To resolve this issue, move the ZIP file in one of your folders of sup of user profile, like downloads, Documents, photos, etc.  Then try to extract the files.

    If this does not work, the ZIP file may be damaged.  You must replace it with a new download of the source.

    Mr. Doug in New Jersey

  • When I try to open my file saved PREL - Adobe Premier elements 11, it starts as usual and then "the project appears to be damaged, it cannot be opened. But when I try to open the same file (but not update) of 'Adobe Premiere éléments Auto-Save' it opens

    When I try to open my file saved PREL - Adobe Premier elements 11, it starts as usual and then "the project appears to be damaged, it cannot be opened. But when I try to open the same file (but not update) of 'Adobe Premiere éléments Auto-Save' it opens as usual.  What can I do to be able to open it?

    Good luck to the project is corrupted.

    Be happy, you have an auto save, even if you've lost some work.

  • Error #3200: Cannot perform the operation on the window closed.

    Hello

    I am trying to open a new window in an extension of CS, but when the test inside the first as an Illustrator, it gives me the error

    Error #3200: Cannot perform the operation on the window closed.

    When I test as a stand-alone desktop application, it works very well.

    I tried it with a window pane mxml, as well as with the code, such as:

    var newWindow:Window = new Window()

    newWindow.title = "new window";

    newWindow.width = 200;

    newWindow.height = 200;

    newWindow.open (true);

    I use a WindowedApplication.

    Flex 3.5

    2.7 AIR

    Flash Builder 4.5 (do not use the Extension Builder)

    Thank you!

    Jeff.

    I'm sorry. I answered from memory. I remembered a little trouble. You did, but you must set the type.

    Here's how:

    victory: MyCustomWindowType = new MyCustomWindowType;

    win.showStatusBar = false;

    Win.type = CSXSWindowType.MODAL_DIALOG;

    Win.Open ();

    You probably want to create a component based on the window.

    In addition, you must use CSXSWindowedApplication. It is possible that it took for this...

  • Opens a file someone else you want to resize an object, it is larger that the artboard, how can I get rid of the artboard

    Opens a file someone else you want to resize an object, it is larger that the artboard, how can I get rid of the artboard

    Marvin,

    You can view > hide the work plan, but why not just put to adapt to what you want?

    You can do this in the file > format Document, or with the tool of workplan according to version.

  • Firefox Version 27 Action Menu error in Reporting Services. An error has occurred with the extraction of data.

    Hello, since I've updated for Firefox 27.0.1 on Windows 7, I have a problem with Reporting Services on a Sharepoint site. It is a site of Sharepoint 2010 with SQL Server Reporting Services 2012 Sharepoint integrated mode. I was already on Firefox version 26 and didn't meet with this problem.

    When a report is opened and you use the Actions link on the Reporting Services toolbar, I get the following error messages.

    An error has occurred with the extraction of data. Please, refresh the page and try again.

    I tried updating to the beta version of Firefox 28 but the same error occurs. I see that someone else is having the same problem here. http://SharePoint-community.NET/forum/topics/reporting-service-and-Firefox-27

    Any help would be appreciated. Thank you!

    Ryan

    Firefox version 28.0 has corrected this problem. Thank you!

  • Cannot perform the operation while the host belongs to a Windows domain.

    Hello

    I'm trying to change recording alter DNS for a host of esx5.1 via vCenter but the following error;

    Cannot perform the operation while the host belongs to a Windows domain.

    The host is joined to the domain, but has a static IP configuration. I prefer to change registration without disrupting the VM on the host.

    Any advice would be appreciated

    Thank you

    M

    FYI, I got this problem by leaving the field, change the DNS settings, and then join the domain.

  • Cannot perform the iTunes update

    Hello
    Try to update iTunes, I received the message (attached, in German):

    "There is a problem with the Windows Installer Package. As a result, cannot perform the update of iTunes. Contact the technical support. »

    What can I do?

    Thanks in advance for the help.

    Best regards, Alpe1

    Try to repair the Apple Software Update of the programs and features Control Panel, and then reinstall iTunes.

    For general advice, see troubleshooting problems with iTunes for Windows updates.

    The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

    Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

    More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

    Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

    If the problem persists and you have a 64-bit system try for the old version of video cards which is a 64-bit Installer for most of the 32-bit code, similar to all 64 bit iTunes up to 12,1 versions.

    TT2

  • Window named csc.exe. Application error, window that says "the application could not start correctly (0xc0000142). Click Ok to close the application when you try to run Microsoft solve this diagnosis

    Original title: Microsoft Fix it diagnosis

    I ran Microsoft solve this diagnosis. He gave me a window named csc.exe. Application error, window that says "the application could not start correctly (0xc0000142). Click Ok to close the application.  someone knows how to fix this?

    Thank you

    FOR EXAMPLE

    Hello

    Thanks for the reply. Until I'm your answer I have restored the laptop to the State of origin, with the possibility of restoring elements that had been added by the user. I'm trying to update windows, etc.. If I get errors or problems I will post them here. Thanks for your detailed response.

    Eddie

  • "Extraction failure: cannot open output file" error message when installing new drivers

    Hello, I am trying to install new drivers for my HP Photosmart C4385 printer.  I downloaded the complete drivers of features for Windows XP 32-bit, and when I start to install (extract), I get the error message:

    Extraction failed

    Cannot open output file

    And the process ends.  He arrived at about 85% extraction every time.

    No idea why?  I called HP, but no longer under warranty they wanted money, which I think as absolutely ridiculous - not even give me basic support?  Poor, poor customer service.

    Hi GIJeff12,

    Temporarily disable any AntiVirus/Antispyware software.

    Cut the installer on your desktop then click on the Start Menu, click computer, double-click on the C: drive and paste the installler here.  Now try a right click on the installer for your printer, choose 7-Zip and choose Extract the files, and then click Ok.  If the installation program extracts now correctly, follow these steps.  If it does not extract, let me know.

    Disconnect your printer from the PC.  Restart your PC.

    Open the newly extracted folder and double-click the setup application to start the installation (the installation application will probably have the same icon as the original installation software that you downloaded).  Connect the printer to your computer when you are asked.

    If it was a success, re - enable your security software.

    Best wishes

    DP - K

  • Cannot open programs and files error: windows cannot access the file or the path of the specified unit. you don't have the appropriate permissions to access the item

    Original title: Search programs and files will not let me

    I get no response from the search - when I hit to see more results I request = aa indicating that windows cannot access the file or the path of the specified unit.  you don't have the appropriate permissions to access the item

    Hello

    1. don't you make changes to the computer until the problem occurred?

    2 when was the last time it was working fine?

    3 are you facing this problem only with Web sites or other sites also?

    I suggest you try the steps below and check if it helps

    Step 1:
    Try to start the computer in safe mode with network and check if the same error message, here is the link:

    http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

    Step 2:
    However, to work around the problem, try the step below:

    a. right click on the program file, select Properties.

    b. on the general tab, at the bottom, you will see listed in the issue of safety: this file came from another computer and might be blocked to help protect this computer.

    c. unlock.

    d. click on apply.
    e. click OK.

    Hope this information is useful.

  • Unable to play video file error: Windows Media Player cannot play the file. The player might not support the file type or a required codec may not be installed on your computer

    Original title: Windows Media Player shows that the new codecs are required

    Original title: query codec and Media Player re

    Have used windows media player for many years on my dell. Usually to see the videos from Sony handycam. Just downloaded wmediaplayer and recent videos from Camcorder will not open one of the videos.

    The following message is displayed "Windows Media Player cannot play the file. The player might not support the file type or a required codec may not be installed on your computer. »

    As I have not changed anything helpful suggestions please.

    concerning

    The winemaker

    Hello

    1. What is the format of the video file?

    2. what operating system is installed on the computer?

    Method 1: Run the troubleshooter in Windows Media Player on Windows 7 settings:

    http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

    Method 2: You can check if the file format of the music files are supported by Windows media player using the link below.

    Information on the types of media files that supports Windows Media Player

    Note: If you have tried to play the file type is included in this table, the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player cannot play the file.

    Method 3: In addition, you can also download & install the necessary codec to play the files.

    For more information, see: Codecs: frequently asked questions

    (For Windows Vista)

    WARNING of THIRD PARTY SOFTWARE: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    Hope this information is useful.

  • Make a right click 'open with' file error command has associated program

    When I use Windows Explorer (XP, OS), click 'Open with' 'another program' right I get this error: "this file has no program associated with it for performing this action. Create an association in the Folder Options Control Panel. " He has never done this before and I can't identify when the problem started. Please do not suggest a repair installation because I don't have enough disk space, and way to many programs installed to a new installation. There must be a registry fix somehow. The Windows registry is the most useless way to track information on the program I've ever seen. It's a problematic piece of * to say the least.

    Hi strFileName,.

    Follow the steps in the article.

    How to change or choose the program that starts when you double-click a file in Windows XP

    http://support.Microsoft.com/kb/307859

  • No sound in 3g 2 files, error "Windows Media Player cannot play the file. The player does not support the format you are trying to play. »

    Original title: cannot get audio from video .3g2 (Windows 7)

    I have a number of videos that were recorded on a Motorola phone to format .3g2, when I played against them in windows XP Pro using what was the most recent media player, they played very well and the audio was present.

    I've since upgraded to Windows 7 Ultimate and have found that videos will play with media player sound is not output.

    I tried different players like VLC (same result, no sound) and came across one called SUPER from erightsoft which indeed works and allows me to re - encode to .wmv BUT when I do and you try to read the .wmv I encounter an error:

    "Windows Media Player cannot play the file. The player does not support the format you are trying to play. »

    When I clikc on help, I am led to a page with links on THIS forum.

    So here I am.

    Can someone explain what is happening, why it happens and how / if I can convert them into a playable (with audio) .wmv friendly format?

    Thank you

    Hi UbinTook,

    You found this message from Windows Media Player due to one of the following reasons.
     
    a. you try to play a file that is not supported by the player.
    b. you are trying to play a file that the player does not support, but the file was compressed by using a codec that is not supported by the player.
     
    Step 1:
     
    Confirm that you are trying to play a supported file type. The following article lists the types of files (formats) supported by Windows Media Player.
     
    Information on the types of media files that supports Windows Media Player
    http://support.Microsoft.com/kb/316992
     
    Note: if you have tried to play the file type is included in this table, the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player cannot play the file.
     
    Step 2:
     
    Download the necessary codec to play the file.
     
    For more information of Codec, see: Codec: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions 

    Thank you, and in what concerns:
    I. Suuresh Kumar - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • File error Windows Media Player mp4 "Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file"

    I got this error message when you try to play an MP4 video. Help please!

    Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file.

    You can try to download the http://www.microsoft.com/en-gb/download/details.aspx?id=507 Codec Installation Package

    If this does not work, you may need to get some third party software to convert MP4 video to the longer Windows Media Player video format supported like WMV, AVI in order to solve the problem

Maybe you are looking for

  • Why do I need to "RESTORE" anything, I JUST bought the thing?

    I bought Apple TV yesterday, worked well. Today, he says that I need to restore something. Why do I need to "RESTORE" anything, I JUST bought the thing?

  • Support for Vista x 64 driver?

    Hello! I thought to upgrade my Vista license to Vista x 64. But I'm not sure if Toshiba supports x 64. The cross-section does not specify if the drivers are 32-bit or 64-bit :( Can someone enlighten me?

  • Text-to-speech does not

    My lady 'Google OK now' stopped to talk to me. She won't even tell me if I need a rain jacket. I tried all of the steps without result. I uninstalled and reinstalled SpeechSynthesis Data-install. TWO of them. When I try to open the installation progr

  • Phone number for the change of blackBerry Smartphones

    I have a Blackberry Curve 9360 and receive the unwelcome calls. How to get the number changed? Thank you very much.

  • Adobe Photoshop CC 2015 is too large on the screen

    I got automatically updated for Adobe Photoshop CC 2015 (from 2014) and now everything is too great in the interface of the application, I barely space to work with my images. How do the buttons/menus, smaller toolbars, as if it was in 2014.I have a