Cannot open contacts
If I try to open contacts on my iPad mini it flashes and then returned to the screen without any start action.
Try a Reset: press and hold the sleep/wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears. -Note: no data will be lost
Tags: iPad
Similar Questions
-
Cannot open Microsoft Outlook
Outlook:
http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx
Office newsgroups
Discussions of general issues of Outlook.
They will help you with your Outlook questions in the newsgroups Office above.
See you soon.
Mick Murphy - Microsoft partner
-
Cannot open any website because the proxy server refuses connections, why?
Firefox is open but cannot open any website. The message said: "the proxy server refuses connections" & "Firefox is configured to use a proxy server refusing connections." I installed the 8.0.1 version again. But he had the same message, once again!
Have you tried it on another browser/computer connected to the same network. If an error of the same type was on Chrome or IE, contact your ISP
-
Safari refuses to go to certain websites (facebook.com, youtube.com) on my iPod Touch and instead displays this error:
S afari cannot open the page because the network connection has been lost.
The bubble at the top where I typed in the URL doesn't change, it always says "facebook.com" or something else.
No matter where I am, so it won't get fixed by resetting my home Wi - Fi router. Other sites load fine. I have reset the iPod, too, by pressing the sleep button and one on the front (whatever it's called) until I see the apple logo. I also did 'Story clear and data Web site' in the Safari settings.
I searched the web and found a number of threads that start with similar complaints, but I can't find one where the problem has been resolved in fact.
Thank you!
Not "no matter where I am," means, it happens with all networks?
If so:
Try:
-Reset the device iOS. Nothing will be lost
Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to
ten seconds, until the Apple logo appears.
-Reset all settings
Go to settings > general > Reset and tap reset all settings.
All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.
-Restore from backup. See:
Restore your device from an iCloud or iTunes backup - Apple Support
-Restore factory settings/new iOS device.
If still problem, make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.
-
Lenovo Vibe Shot - cannot load contacts after update MM
I found a doubt, after the system upgraded to android Marshmallow 6.01, my favorite vibe cannot re-establish contact or even to open contact list his Dungeon of loading, what do I do now? Please help...
Administrator: Topic published to better express the problem
The problem is solved by resetting the factory setting... :-(
-
My iCloud and shared calendars has stopped working in MS Outlook today. They worked yesterday. Now, I get the error message "cannot open this series of records. The information store cannot be opened? I tried the fix standard support.
Same thing here. Looks like Windows did an automatic update during the night, and now nothing iCloud associated work (calendars, contacts, etc.)
I also noticed that the error message: "could not load file or Assembly ' MOM." Implementation ' or one of its dependencies. The system cannot find the specified file. "It started after restarting the Windows Update as well. I imagine that the two are related in the same problem to iCloud.
-
Cannot open all PDFs in my documents, Acrobat fatal error
Acrobat failed to connect to the dde server.
Cannot open all PDFs in my documents.
Hi Brandon,.
1. what happens when you try to open your file Portable Document Format (PDF)?
2. it worked earlier?
3. have you made changes to your computer recently?
4. What is the operating system installed on the computer?
I suggest you to contact your software vendor and check if it helps.
-
Cannot open the document scanned to email
I have a HP Photosmart 7525 and when you scan a document or photo to email, I can't open it. Box pop up saying Windows cannot open this file, select open with program and none don't.
Hello people,
I'm sorry to hear about the problems with scanning to email. I recommend contacting the Cloud service for this specific problem.
Please see this post by TwoPointOh - Cloud Services of Information.
I hope it's resolved for you all soon!
Kind regards
-
all mail is marked
original title: can acess hotmail but cannot open the mailHello
Answers is a peer group supported and unfortunately has no real influence on Hotmail.
HotMail has its own Forums, so you can ask your questions there.
Windows Live Solution Center - HotMail - HotMail Forums Solutions
http://windowslivehelp.com/Hotmail - Forums
http://windowslivehelp.com/forums.aspx?ProductID=1Hotmail - Solutions
http://windowslivehelp.com/solutions.aspx?ProductID=1How to contact Windows Live Hotmail Support
http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htmWindows Live Hotmail Top issues and Support information
http://support.Microsoft.com/kb/316659/en-usError message "your account has been locked" when trying to connect
http://windowslivehelp.com/thread.aspx?ThreadId=77be7d82-a0e9-49c7-b46d-040ec654a9e2Compromised account - access unauthorized account - how to recover your account
http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41Hotmail hacked? Take these steps
http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Cannot open COM1. Please check your port settings, XP SP3
Hello
I have some XP SP3 workstations that are used in the factory. The shell of charge is attached to COM1. When I test the appliance to make sure that all devices work, the shell load test will not open COM1. When I use HyperTerminal to test COM1, I get the message "cannot open COM1. Please check your port settings. "I checked the BIOS of a workstation and compare it to the non-working station. Corresponding to all of the information correctly. When I check property COM1 resources, the station problem looks identical to the right station and no conflicts. IRQ 04 corresponds to the current setting. To get the workstation resurfaced to open COM1, I open COM1 properties, resource tab, uncheck and then re-check "use automatic settings" with your status to uncheck. After having double checked the "use automatic settings", I click OK. I then go back to see what the parameters are. He changed his IRQ 07. This change works until the computer has been restarted , and then the following steps must be applied again. Also, if I perform these same steps on a workstation, I get the same results with the change IRQ. I don't have the problem with com except COM1 ports. We use the software in a box. Change to use another com port is not an option.Thank you
MANISHHello
Note that your computer is under domain, you must contact the TechNet forum, where we are the support technicians who are well equipped with knowledge on the issues of domain, do please visit the link provided below.
http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro
-
Cannot open the application "iTunes" because another user is open.
I recently bought a new computer with vista. Installed iTunes on this computer and found that there is a problem between the two profiles on the computer. I run iTunes on my profile - but whenever my wife profile is active we are getting consistent error messages indicating "cannot open the application"iTunes"as another user, he has opened." Ask the other user to quit the application and try again.
I need to keep itunes open in my profile - and anyway, why are they bent them in two profiles in Vista... we never had this problem under XP.I asked Apple for advice, and they suggested to install itunes in the second profile... which I did and said to reinstall/repair...which is not the goal... Apple then told me to contact Microsoft support as he would have to do with the admin files...Any advice pls.Thank youFind the Itunes.exe in the Itunes folder in Program Files. Right click on the .exe / Properties / compatibility, look down at the bottom of this page for the 'privilege level' and check the box that says "change settings for all users. In the heartbeat window according to the box that says "run this program as an administrator". This can only solve your problem if you can both run under the same user name.
When you run a program as an administrator you should get a quick UAC (unless maybe you have turned off UAC?
To see the file extensions, you may need to go into Control Panel / folder Options / discovers, there you can uncheck "hide known file type.
-
Cannot open volume for direct access?
OK so I have windows vista 32-bit home... and I installed this program from avg that solves all the problems on the computer... Well now when I boot, I get a cannot open volume for direct access... and I loaded my computer finally and its telling me everything is corrupted?
Hello
I'm sorry but most of the posters, which I am part, who come here do not believe in using Tuneup Utilities, registry cleaners, etc. to improve performance or solve problems.
They are completely unnecessary.
Do a Safe Mode system restore to before the problem started.
http://bertk.MVPs.org/html/restoresysv.html
How to access Safe Mode
http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
Or, if you don't have one, borrow a DVD of Microsoft Vista, not a recovery disk and you could do a upgrade in repair facility.
"How to perform a repair for Vista Installation"
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
And I have contacted AVG or their Forums as you say it was their program that caused the problems.
http://free.Avg.com/us-en/support
See you soon.
-
Original title: cannot open my explores
Try to connect to the Solution Explorer, I get a message:
Is this a virus?What is a corrupted dll?An easy way to fix it?Hi Ephisto,
Please see the thread with a similar problem and fix possible:
I hope this helps!
-
. Cannot open Outlook 2003 on Vista
Worked very well, with no problems until about a month. I get the message: "cannot start Microsoft Office Outlook. Cannot open the Outlook window. The set of folders coiuld not be opened. The server is not available. Contact your administrator if this condiditon persists. »
I have a / re installed this several times. Get the same message. I use Windows Mail, but without Outlook, I can't get into my contacts.
Help!
Liz
Hello
It comes to the installation of vista operating system instance
Please repost in outlook forums
-
Error message: Windows cannot open this file
Whenever I click one of my contacts in my contacts folder, I get a message that says Windows cannot open this file and gives me the choice to open with another program or search the Internet for a program to open my file of contacts. Can someone help me with this please?
Right-click on any contact, and then click Open with... Then select Windows Contacts (it may have been changed to another program) and check the box at the bottom that says always use this program to open this type of file, and then click OK. If the Windows Contacts is not listed, click Browse and find the main executable file for Windows Contacts add the program then select it and check the button. To help you find this file, go to the Windows Contacts shortcut in the menu start / all programs and right click on it and find out the location of the target - is where you ought to watch.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Maybe you are looking for
-
turn off HP Simplepass messages
How can I turn off HP Simplepass messages on a new Windows 8 HP laptop? A "pop-up" appears whenever he recognizes that I am in a protected password site. "Do you want HP SimplePass to remember your password for this site?
-
Intel vs default nvidia graphics
Hi all - I'm a little confused as to if my VN7 - 792 G is configured properly. If I right click on the desktop and go to properties of the graph, the Intel HD Graphics Control Panel is in place. The Nvidia control panel shows only options for the 3D
-
Hello I installed the Ni DAQ software for 6024E card. As I walked through the code examples in Visual C, I came across AIonePoint.c file where the AI_VRead() function has been used. But I could not find the function definition. I would like to know w
-
Colorful TIFF appears different color when exporting to PDF
Hello worldI'm having a problem with the Tiff feature in InDesign CC.I have a series of print drawings that use the same structure: a TIFF color in the background and a Duotone above this one PSD file.Most of these models work perfectly. However, for
-
GREP styles in market headers?
I have a simple style of GREP, put in italics of ampersands, applied to my paragraph headers running style. But it is not being italicized them. GREPs simply don't work all on headers?Thank you.~ Valerie