Cannot open Lightroom 4. When I try to open Lightroom 4, he asked my license. As I wrote my serial number, he accepts it, but do not open the program. Any ideas to fix this?

Similar Questions

• I use CS5.1 and cannot open it all at once. I get the prompt to get the SC6 JAVA run-time inheritance.  I installed, but still cannot open Photoshop. Any ideas?

  I use CS5.1 and cannot open it all at once. I get the prompt to get the SC6 JAVA run-time inheritance.  I installed, but still cannot open Photoshop. Any ideas?

  Would you please install Adobe Application Manager from the link below, then try again to install the application again:

  Adobe - Adobe Application Manager: for Macintosh: Adobe Application Manager

  ~ Sarika

• lack of PIDOCOB6.dll cannot open the program

  lack of PIDOCOB6.dll cannot open the program of old software from microsoft for photos

  lack of PIDOCOB6.dll cannot open the program of old software from microsoft for photos

  =========================================
  The article Microsoft Knowledge Base that address the
  Question of PIDOCOB6.dll are no longer available, but I think
  the fix was to uninstall/reinstall Picture It!.

  Also... the error could be related to a printer driver... If you
  recently installed a new printer or your printer driver update
  It is maybe at fault.

  Sorry that's all I have on the subject.

  There is a Picture It! Group on Yahoo Groups... maybe
  could someone offer a few ideas:

  A_Picture_It_Help · Creative with Picture It & SOAK!
  http://tech.groups.Yahoo.com/group/A_Picture_It_Help/

• Grammar red line will only appear on the words misspelled on the half top of my document, but not on the bottom half how to fix this?

  Grammar red line will only appear on the words misspelled on the half top of my document, but not on the bottom half how to fix this? I am writing an essay and I know I misspelled words it contains, but the red line will not work. What should I do about it?

  Hi Brittany,

  You use Microsoft Word?

  If you use Microsoft Word, you can post your request in the Forum Office for assistance.

  Microsoft Office Forum

• After the upgrade yesterday from Vista to Windows 7, now my Cisco VPN does not work and I get an error message titled: grounds 440 driver fault. Any ideas to fix this?

  After the upgrade yesterday from Vista to Windows 7, now my Cisco VPN does not work and I get an error message titled: grounds 440 driver fault.  Any ideas to fix this?

  This was the solution!  The works of vpn as $ 1 million now.  I followed the instructions above to enter the uninstall program and selecting the repair option.  I rebooted the machine, then used the troubleshooting on vpn software compatibility option.  Selected Windows windows xp (service pack 2) as the correct software and cisco vpn client started right up.

  Thanks, Nick!

  Rick

• have a tungsten palm but don't hotsync with computer any ideas to solve this problem

  have artificial light of palm, was used for years.  can't hotsync with laptop.  any ideas to fix this?

  have artificial light of palm, was used for years.  can't hotsync with laptop.  any ideas to fix this?  Never mind. read pia techniques

• Cannot open the program after you restore the backup of the files.

  original title: problems of recovery program

  I had to do a system recovery. When the files have been restored from the backup made on to the DVD-they do not repopulate the original sites, that is to say the restoration has created a section of program in the C drive, but it had only the value default ones that came with the computer since the store - as it was supposed to, given was a cover. However, all of the programs I've added over the years are stuck in the restore file called "Program Files" as most have been downloaded since the ' net, I have no disks. not only that most is time sensitive and have many improvements. How can the Backed files program, now residing in 'My Documents', developed by the backup process located in the C drive program area? When I try to open the program in the restore file, the content and details are listed, but the program does not work. Thanks for any information.

  Hey Dave to Campbell River.

  I'm a bit confused between your question and the answer. Have you already restored your system or if you are trying to implement and obtain information?
  In response to the original question, you can back up your entire hard drive, back up is called a System Image, it will be, as it is said, back up your system.
  A system backup / full copying data files, but not everything on the drive. You cannot use it to restore the entire system.
  I hope that sheds some light on it for you. And fear what (I'm trying to follow the number two of the answer now) you created a backup system, and are now trying to re access to your program files, I'm afraid, you're out of luck. I had to learn the hard way, too, so I hope you are getting information and are not in this situation.
  Hope this has been useful, if you have any other questions, feel free to keep coming them.
  Thanks for posting of answers!

• Cannot use Picasa get message Internet Explorer cannot open the program

  Original title: Picasa & gmail.

  Picasa - I can use the program to import images, editing, downloads of albums, etc., and I used to be able to send the album to some of my

  contacts. ALSO - I used to be able to look at Picasa albums sent me to display... NOW - I GET A MESSAGE THAT THE INTERNET EXPLORER

  UNABLE TO OPEN THE PROGRAM.  I changed a few settiings - any thoughts - I use BING should I change chrome?

  In addition to HOt MAIL account, I also have a Verizon account and a GMail account.  I can access all three accounts - however - WITH gmAIL

  I can send & receive - but can not get on my gmail homepage... Ideas on this subject.

  Thanks for your help

  Isadore salvation,

  Welcome to the Microsoft community!

  You cannot use Picasa get message that Internet Explorer can not open the program.

  The question is perhaps because of settings or firewall.

  I suggest you to refer to the procedure described in the site:

  Download Troubleshooting

  http://Cat.Microsoft.com/ticket.aspx?ID=908433&threadintid=908433&forumid=5&ThreadId=0c5a0295-efd9-4f34-9ED5-98d4374e30bf

  Important note: firewall can help protect your computer against viruses and other security threats. In most cases, you should not disable your firewall. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your firewall software is disabled, your computer is vulnerable to attacks.

   

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

   

• Unspecified error when burning DVDs with windows media player DVD is empty when starting get coded, then when control burn error occurs and does not burn the disk. How to fix this?

  I get an error when I burn DVDs with windows media player. He asked correctly when I lad the DVDs that I choose to burn a dvd disc. Then I add my video fles she adds and lists. Then I hit burn and it starts to create the dvd disc. All my files are wmv files. The bar regarding % moves to 100% but captured along with burning the disc, he rejected and I get an unspecified error message. with just a button to hit, which will close the error box. The files don't burn the disk accordingly. The disc remains empty.

  Hi N2tjq,

  Are a. When you facing this problem?

  B. is - what happens with all DVDs?

  C. recent changes made on the computer?

  I firstly you suggests to save the project to your computer, and then try to burn on a DVD at a slower burning speed.

  Choose a speed slower burn to your DVD recorder as follows:

  1 back to adding photos and video to the DVD page and then click on Options.
  2. in the DVD burner speed box, select medium or slow.
   
  Change-Windows-DVD-Maker-DVD-Video-settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-DVD-Maker-DVD-video-settings

  If the problem persists, download the service pack 2 for windows vista on the computer
  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791

  See the link below:

  Error message when you try to publish a movie to a DVD using Windows DVD creation in Windows Vista: "unspecified error".
  http://support.Microsoft.com/kb/949281 
   
  For more information, please see the links below:

  Burn a DVD video disc
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  Troubleshoot-problems-with-creating-a-DVD-Video-using-Windows-DVD-Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  If you use windows media player, see the link below:
  Burn-a-CD-or-DVD-in-Windows-Media-Player
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player
   
  Previous post: the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I tried to download nancy drew the game he told me that the program was how to fix this problem

  I tried to download a game called nancy drew the it is downloaded, but when I try to open it it tells me that the program cannot start because D3DX9_33.DLL is missing from my computer how can I fix this problem

  Hi Mona83,

  ·         What operating system is installed on your computer?

  ·         The problem happens with this game here?

  ·         What is the version of DirectX installed?

  ·         You did changes to the computer before the show?

  You can try reinstalling DirectX and check if the problem persists.

   

  End-user Runtime Web install DirectX

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=35

  Let us know if that helps.

• I cannot install lightroom, it does give me an option to enter my serial number.

  Hi everyone, hoping someone can help me. I have this version of lightroom 4 is installed on my iMac and had no problem putting it on. I just tried to install it on my macbook, and it doesn't seem to do it. Whenever I want to install it, it says installation complete, so I'm going to open it and the process is repeated. I never actually do the program on my device and therefore cannot put my serial number in access.

  It's getting frustrating now, and I need to use it. No on the cat seems to have ideas.

  Thank you

  Joel

  I really think you are by clicking on the icon of evil. The icon to start the program is different from the one that you used to install Lightroom. Go to your applications folder and find the program Lightroom and double click on it from there and see if it will start.

• Online help the link no longer works in any of my programs. Any ideas on fixing this?

  The help on most of the Programs tab includes links to online support. It often has a link to the homepage of the software. All of a sudden these links no longer work. This seems to be true for all of my installed programs.

  Hello

  1 how long have you been faced with this problem?
  2 do you have you can all changes on the computer before this problem?
  3. are you able to browse the internet?
  4. do you get an error message?

  In response to the questions above could help us help you better.

  Check if the problem persists in the clean boot state.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

• When burning a dvd, the sound is not onto the disc any ideas?

  ive tried using media player to burn a disc and also dvd maker but having no joy, because the sound is not transferred to the burned disc

  Hello

  1. what kind of content you burn?
  2. What is the burned files file extension?
  3. on which device you play the DVD after burning? What version of Windows Media Player is installed on your computer?
  4. what happens when you play the DVD on your computer after burning?
  5. are you able to play other DVDs

  Method 1.
  Check if you are able to play this DVD on another computer.

  Method 2.
  Or you can also view by exploring the DVD if t that he burned files. Check if you can copy these files to the computer and play.

  I hope this helps.

• Hi guys, I have subscribed to lightroom but can not install the program error "you run an operating system supporting Lightroom is more."

  You run an operating system supporting Lightroom is no longer.

  Hi Lahaina,

  Please check this link to see if your machine is compatible with Lightroom:

  The system configuration required

  Just in case if it is not please upgrade your operating system or contact support to cancel it:

  Customer contact car e

  Kind regards

  Megha Rawat

• "Lightroom_5_LS11_mac_5_7.dmg" for Mac update my Lightroom 5.6 (build 974614) but when I try to open it I get the error message "Lightroom_5_LS11_mac_5_7.dmg cannot open the disk image is not recognized. I am running OS 10 of Yosemite

  I downloaded "Lightroom_5_LS11_mac_5_7.dmg" for Mac that allows to update my Lightroom 5.6 (build 974614), but when I try to open it I get the error message "Lightroom_5_LS11_mac_5_7.dmg cannot open the disk image is not recognized. I am running Yosemite OS 10.10 on a Macbook Pro (retina, 13 inches, end 2012 with 2.9 GHz Intel Core i7 processor).

  Vk2mh looks that the download was not complete or corrupt.  When you download the update from?  Have you tried to download it again?