Cannot open my emails. they are there but will not open

Similar Questions

• What is the problem since most of my e-mail messages are not displayed when I search for them in the top search bar? They're there, but will not be displayed in my search.

  In the past, I've always been able to search a specific e-mail from a client in the search bar up in Thunderbird, and most of my emails now not appear to customers more. They are there, but I have to physically to scroll through all my emails and find them. It is not practical at all, and they have not been deleted, so they should show up in my research. Do you know what I should do to get this working properly again?
  Thank you!

  Thanks for the screenshot. This looks like a global search. More information in this article.
  https://support.Mozilla.org/en-us/KB/global-search
  Note, for a global search to work, it must be enabled in your settings, and the index must exist. In certain circumstances, it may be necessary rebuild the index.
  https://support.Mozilla.org/en-us/KB/rebuilding-global-database

  You can also try the quick filter toolbar.
  https://support.Mozilla.org/en-us/KB/quick-filter-toolbar

• Got the Trojan.Zbot before the antivirus kicks. All previous emails show they are there but cannot see the content. They can be restored?

  All old emails show they are there, but there is no content when you try to open them.

  right click on the folder, select Properties, and then on the button repair. A new index will be generated which can fix the issue or do the empty emails disappear because they are no longer available to be indexed.

  BTW look in your anti virus program for files quarantined with names like Inbox

• Cannot access certain Backed-Up files, the files have been backed up by Modem Toshiba F:. They are visible but do not meet the identification by clicking on 'open '.

  On 3 Mar 11 we couldn't send or receive e-mail. March 6, 11 we couldn't get online. The response has been"Internet Ecplorer may not display this web page. "9 Mar 11, I called Dell hardware Plug and informed them of the problem. I backed up the files when Dell informed us that the TechRep would happen on 9 Mar 11. He looked at the PC and has determined that the hard drive and motherboard were corrupt. It replaced the two parties. I waited two more days until all security documents have been uploaded. On 11 Mar 11 I tried to download the Backed-Up files in the Modem Toshiba F. I clicked on "open: for two dates in question: there were six selections: Internet Explorer, Documents, drive E, recipient of the E-Mail." WINRAR and Adobe Reader. In vain.  Thank you very much for helping us with this annoying problem. E-mail address is removed from the privacy *.

  Daniel Stanley

  TELEVISION, USAF

  I. the answer was very helpfuk, I did not know that Microsoft it frre of service.

  2. the computer is the same: Windows Vista Home EditonSP @.

  3 here are the answers when I click on the file 2011-03-06:

  a. backup Now EZ is displayed. Click back causes the following to appear.

  b. backup files 2011-03-06.

  c. backup files 16 ZIP - ZIP Archives-unpacked. Size 194, 134 236bytes

  d. cannot download 2011-03-03, THEY are apparently combined.

  e. frankly, as a novice;  I think that it is theToshiba F: Extractor Back Up that causes the problem. Files are visible, but will not open the file.

  Daniel Stanley

  TELEVISION, USAF

• access to the content of the files downloaded from the internet: when I download PDFs from the internet to my documents, they get there but does not open

  When I download PDFs from the internet to my documents, they get there but does not open.

  Download Adobe Reader; Uncheck the box first the Google toolbar:

  http://get.Adobe.com/reader/

  How to set file Associations:

  http://articles.TechRepublic.com.com/5100-10878_11-6172036.html

  How do I... Change file extension associations in Windows Vista?

  See you soon.

  Mick Murphy - Microsoft partner

• Problem with iTunes 12.3.2.35, other titles are visible, but will not play. How can I play? Thank you

  Problem with iTunes 12.3.2.35, other titles are visible, but will not play. How can I play? Thank you

  Can you describe what happens when you try to play these tracks?  Do you have an error message (If Yes, what does say)?  Are the visible but greyed out?  They were a symbol of an exclamation mark next to them?

• We do not find our user accounts, it is said that they are there, but they do not appear in the folder

  We just got this PC and tried to establish user accounts.  He said that accounts of users (2) are there but they do not appear in the record and 1 single user is available.

  Hello

  Press the Windows key + R, type netplwiz command run, click OK. In the user accounts window, you should be able to see all the user accounts on your system.
  Hope this helps, good luck :)

• I have CS4 and updated my OS x 7.5 in Yosemite 10.5 - applications are still there but will not open. He said that I had to restart the computer after which he said that there is an error 6. I have the license key but does not have a place to insert it.

  I have CS4 and updated to OS x 7.5 to 10.5 Yosemite. Applications are still there, but can not be opened. After the restart, the application displays error 6. I have the

  Original key, but does not have a place to enter.

  We recommend that you reinstall the applications. You can use the Cleanup tool to remove the applications and products CS4 download from here.

• HELP PLEASE! I lost about 400 GB of MP4 (film and audio book) using Chkdsk files. He repaired broken sectors/files regardless, but it changed the extentions. How can I find new extensions? they are there, but I don't know how to find them.

  I have Vista Home Premium. I have a huge media collection for my ipod. I save all my video files and files on an external hard drive (my book 500 GB) audiobook while they clutter up my internal drive and so I can store them where my internal drive has failed somehow... Well I got the opposite happens. I started to get my video files would not open in their records. I ran Chkdsk utility to "fix" the files. When the program has finished running he had a Msg: something has changed the names of files and everything I was supposed to go to the files and the rear switch (as far as I can remember... I don't wear SPECIAL attention for the MSG that I thought it was normal and the program would take me to the files when it was done... ERROR. All desktop shortcuts no longer find files directly by going to my computer, then by looking at the HD I cannot find the files.  I used the program REcuva file hippo and it restores the few files that have been deleted out of the dirve and allowed to see some of the video files and audio books (but no tag info remained on the recovered files. I had to so I would like to know what they rename them). Other than these few files... less than 20 I t help either. Records that they are still there, but it asks me to open files with a program from a list of choices and not of the program draw files. (the choice to choose this high program open this type of file is also blacked out). Also when I run the cursor over the records of the size of the files do not match wat I know should be in the files. But if I just look at the my computer screen and run the cursor over the icon of the letter itself it show that there is 435 + GB hard disk info and 50 + GB of space left on it.
  A few questions:
  1. is it possible to see all the possible msg that the command chkdsk can generate so I can find that he gave me when he fixed my files?
  2 - How can I find these files if I don't know the extensions I'm looking for? they were for quicktime mp4 files, but I don't know now.
  3 - If the drive to my drive internal and try to list the backup files is located on the drive where I'd start trying to open the files?
  4 do I just need to cut my losses and reformat the hard disk, crying over 2 years, he took me to build the library and start over again >? (at least I kept some of my files from itunes library since itune on DVD about 1.5 years ago (about 300 GB of data there))
  And by the way the reader is set up to the FAT 32 format, that I did not know until this all happened.

  Go to start / Control Panel / folder Options / View and uncheck Hide extensions for known file types.  You should also check the box to see the system and hidden files while you're there.  This should show you the extensions of all files if that is the problem.  You can then rename the files for extensions are associated with a program that will open and read the files (you may need to experiment first with some programs to find one that works and an extension that works if they have been changed).  I don't know any way to do this for all files at once - they will have to be renamed individually (yes - I realize counts the number of files involved, but I know of no program in Vista or even a 3rd party program that will change the extensions for a group of files at a time - you can check for yourself on www.tucows.com and www.download.com).

  Desktop Shortcuts no longer work because either the file type of the source file has changed and the shortcut does not open the file, or because the file has been moved and the shortcut can not find the path.  You should be able to check the path by finding files (whatever they are now called) and see if they are in the same directories in path as they were before this happened.  I think it's because the source file works more correctly because of the extension (or corruption).

  Recuva to recover lost or deleted files - not the files that are on the system (and you won't not solve your problem by deleting them and then use Recuva to recover because it sounds like the problem is with the extensions and Recuva is not going to be able to correct it (it is not part of his program)).

  There's no list of ALL possible messages that might be generated by chkdsk I know.  Here is an article on the chkdsk command works in XP and some messages it generates - but far from everything and nothing look like the one you receive (and it works essentially the same under Vista): http://www.isd518.net/District/TechDir/Help/Chkdsk.htm.

  The backup on your internal hard disk drive will not solve the problem - just move it.  The 'damage' to the files are already done a backup now will not solve anything.  The fact that the drive is set up in format FAT32 is not the question (and probably not the question in the first place is) and change to NTFS now is not going to solve the problem (although you can do that after all this has been resolved).

  I won't tell you to cut your losses - this is a pretty drastic step and there may still be other options (although I don't know myself).  You can take the reader to a recovery expert data (NOT Geek Squad or one of these other major centres to store) which may be able to recover some, most, or all files.  It will be expensive and only you can decide if it's worth the cost.  These people usually the game fee and do not offer a guarantee of recovery - even if they don't recover anything you always pay.  The decision is yours.

  If none of this works, transfer your question in images and videos Forum at: http://social.answers.microsoft.com/Forums/en-US/vistapictures/threads where people who specialize in issues related to the video may be able to help with your problem, since it's video files.

  I hope this helps.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• the imported images are there but does not appear

  Hello

  I'm new to Lightroom, but not to the digital imaging.  I am deciding whether or not to use Lightroom as archiving software.  I have imported photos with various types of files in Lightroom, copy them into the default location and convert NEF photos in .dng files.  Everything seems as it should in what concerns the lists on the left, and the files are where they are supposed to be in the default locations and are operable and viewable in photoshop.

  The problem is that everything that is displayed in the environment Viewer are rectangles greyed.  No images.  Can I export an image in a different file type to an external location and display it correctly.  So all the images are there and LR know where they are (since he created and put them there).  The film in low also rectangles is just gray.

  I have no idea what prevents images from appearing and I hope someone here can help.  I am running XP SP3 and Lightroom 2.5 632038 Raw 5.6.  I import files NAVE of Nikon and a D300 camera Coolpix 4000 Scanner.  Photoshop reads all of these pictures raw with their plug-ins.  Moreover, I also imported jpg and tiff files and they do not appear in the screen either.

  Thanks in advance

  dmm108

  Believe it or not, your monitor profile is corrupt. A corrupted profile can sometimes manifest only in LR and not in other programs managed by color as Photoshop.

  Either use a hardware standard, which is the best thing (look up on the web Spyder), or modify your monitor profile by default in sRGBxxxx, with the rest of your profiles. On Windows XP, you can do this through control of management/display/settings/advanced/color of the Panel. Make the second of these two things is really just a stopgap. If you don't calibrate it with a hardware device, you will always have incorrect colors.

  Anyway, to convince yourself that the profile is in fault, change it in the color management.

  HAL

• The search in Windows Explorer has stopped working properly - it does not find the files which are there, but will find other files that match the search criteria

  Window 7

  Was working before, but have only allowed a number of updates to Windows that had been blocked for a while.

  For example. Type 'safe' in the search box. It finds files and directories with 'security' in the title, but not the files and directories that I can see are there with 'safe' in the title.

  When I search using the "safe * ' it seems to do exactly the same thing as"safe ".  It does not show only files beginning with 'safe'

  My suggestion was not ' safe * ' but ' name of the file: ~ safe * "(without the quotes).

• installed a new black cartridge, colors are there, but should not the printer print again

  Photosmart e 5510 all-in-one

  Was completely out of ink installed new black cartridge, do not have color cartridges. Went to copy I get a blank page. The printer sounds like its printing. Purchased with HP printer cartridge

  I'm sorry that you're having this problem, but the printer will NOT work without the color cartridges.

  Even if you chose to print in B & W, the printer still need to use each cartridge colors to mix with black to make a true black color.

  If you put in the color cartridges before printing.

• I have, I turned on my computer and now I can't find one of my programs. They are there, but they will not appear.

  I turned on my computer today and none of my programs has emerged. The icons were not on my desk. When I click on the start menu and click programs, it says (empty).

  Hi Mlwatson82,

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1:

  Step 1: Start in safe mode and check if the problem persists.

  What is safe mode?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-safe-mode

   

  See also

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  I hope this helps.

• After the closure of 7.0.1, win7 64 bit and reopenning firefox, tabs on the toolbar are there but does not (something new).

  Something new today. I have seen on the taskbar tabs (each of them can present a few tabs) that appear on the task bar, but the open habit. In order to get something to open I have to set on the Firefox icon on the desktop. Then this session opens with several windows and tabs... but the other tabs remain unopennable. When you move them on the taskbar, they show the empty boxes, while others look ok.

  Try *http://kb.mozillazine.org/Corrupt_localstore.rdf

• Fuze sees no podcasts but I know they are there

  My computer is running XP, service pack 3

  Firmware is v01.02.26A

  Down under settings of the "rocket" says I have 0 songs.

  The "rocket" is in MSC mode.  I slipped and dropped to a folder that contains podcasts in the Podcast Directory and the directory of the music, but the "rocket" don't know they are there.  I can see them when the "rocket" is connected to my computer and I am using Windows Explorer, but when I disconnect the player it says "no songs".  When I reconnect the drive, the computer always see the files.

  Also, when I use the 'disconnect hardware safely' on my computer to disconnect the "rocket", my computer tells me it is offline, but the "rocket", said still "connected".

  I use PodNova and juice to catch and download podcasts on my computer.  I used the same method on my Sansa E250 and it worked perfectly.

  One more thing that I just noticed.  There is a special podcast that I can see and play.  I just download it.  I can't see it if it is in a subdirectory music or Podcast, but I can see it if it's right there.  Its genre tag is classic, or so it says in ID3 Editor Lite 1.4 v is otherwise likely to be the problem?  (I'll check and after an update, but now when I try to 'disconnect' it I get a message saying that the device cannot be stopped, so I shut down my computer, which means I'm going to lose this screen).

  Beta version? It is of version 2.44

  You can also find it at CNET download.com.

  It is a very well established and stable program. Not some software by weird night.  More than 100,000 people have gotten only CNET.

  You must set the default (Tools/Options/Mpeg/Tags, write to ID3v2.3 ISO-8859-1), browse to the file (file/change directory or by double-clicking the file and find mp3tag in the menu), highlight and save, it is converted to the correct version. Once the default value is set, it takes less than a second.

  Make sure you edit the file on your rocket, not on your computer, or if you want to be completely meticulous about it delete the file on your rocket, difficulty that a your computer and send it again.

  If you really set the tag with mp3tag, and a properly labeled podcast is on the "rocket", I'm puzzled that your rocket can't not - so in Podcasts, then under music. (If you're in mp3tag, give it a name you find and call the "Podcast" Genre.)

  You asked, why is it so difficult? Because the ID3 tags are not normalized.