Cannot open the hard disk C: and D:, or no matter what follder on them by double-clicking

Similar Questions

• Update (KB967715) will not be installed. Cannot open the local disk C, with double click

  I have installed above updated 6 times, when install it says its 0 KB. said after complete installation, but the update is not installed. I just re-formatted my computer and this is the only problem so far. now when I goto:

  My computer
  Local disk C:
  Left click (to open), I get following error:
  Windows cannot find 'info.exe.

  I can only open the hard drive with a right-click then left-click Open. Not the end of the world, but I would like to address this problem.

  I think its something to with what precedes the day and the Autorun feature.

  Thanks for any information, that everyone has.

  Hello

  It seems to be a virus called protectfile.vbs or autorun.inf.

  Follow the steps below to remove this virus from your computer.

  Download the free tool http://www.emco.is/download/moveonboot/moveonbootsetup.exe MoveOnBoot
  
  MoveOnBoot open
  
  Go to rename Action-> rename file
  
  A dialog box opens, select the file. Because these files are hidden files, you will not be able to travel and see. Please enter
   
  Enter "C:\protectfile.vbs" in the section of the file selection.
  Enter "C:\protectfile.html" in the section of the destination file. Enter OK.
  
  Similarly, repeat steps 2 through 4 for the file 'C:\autorun.inf' and rename the in 'C:\autorun.html '.
  
  Do not restart your computer. We have implemented moveonboot to rename the .vbs ProtectFile in only one of the disks.

  Repeat step 2 to 5 for each disk. For example, if you have 4 drives on your computer (C, D, E, F), then you will have to rename '.vbs C:\protectfile', 'D:\protectfile.vbs', 'E:\protectfile.vbs' and '.vbs F:\protectfile' 'C:\protectfile.html', 'D:\protectfile.html', 'E:\protectfile.html' and 'F:\protectfile.html' respectively.

   
  Even renaming file "autorun.inf" in all readers for the corresponding ' autorun.html' files.
  
  Restart your computer. We have disabled the virus.
  
  Now we will remove it completely.
  
  Reopen MoveOnBoot.
  
  Go to delete Actions-> delete the files
  
  You will not be able to browse and reach the files. Then click Browse and enter 'C:\protectfile.html', 'D:\protectfile.html', 'E:\protectfile.html', 'F:\protectfile.html', 'C:\autorun.html', 'D:\autorun.html', 'E:\autorun.html' and 'F:\autorun.html '.
  
  Restart your computer.

  The steps above should solve the problem for you.

  ======================================

  Click on the link to the following article for the update KB967715: http://support.microsoft.com/kb/967715

  All the best!

• Cannot access the HARD disk drive HARD - Satellite P300 recovery

  Hi all

  I want to perform a Toshiba product recovery, using the partition on the HARD disk. I did it before and no problem.

  But when I press F8--> computer repair--> selection language--> then I have to select a user (Administrator / my name/guest) when I select the administrator, it says that my account has been disabled, when I select the user with my name (Kenneth) he continues to the menu where I can choose the different options for recovery. If I select the product Toshiba blah blah thingy a screen comes up saying it can't find 01 HARD drive. I did nothing with the partition containing Vista.

  My guess is that I need to log in as an administrator, which is impossible. My user account in Vista is a Director,

  Can someone please?

  I use a P300

  Best regards
  Kenneth

  You have made changes on the second partition where is placed folder HDDRecovery?

• Cannot change the HARD disk parameters in the Bios on Satellite A200

  I can't change the hard disk parameters in the bios for my satellite A200-1The
  This bios does not support changing the parameters of the hard disk for example SATA to IDE?
  BIOS version is: 5.6

  AFAIK in BOS advanced settings you can change mode SATA controller only. You can use the AHCI mode or compatibility.

  I put t understand why do you think you can use IDE mode. What you want to do exactly?

• Cannot open the raw in PS and bridge?

  Cannot open raw in photoshop or bridge using nikon p7800?

  Hi Tanuj,

  Yesterday I went to my dealer and I'm going to Yosemite the computer.

  So today, I download CC2015, and everything is fine with the Nef file!

• Satellite M60 - cannot access the HARD disk but update the BIOS

  Hello

  I want to update the bios on a Satellite M60
  the problem is that I can't access either on my hard drive it still reboot

  So, first I want to try to update my Bios but as I can't work with windos XP I need to do it with a Dos command.

  is there any solution for this?

  Thank you very much

  and why you want to update the BIOS?

  Even if the BIOS is not updated, the laptop should work well and should start the Windows operating system.
  This means that the problem with your laptop is unrelated to the old version of the BIOS.

  Have you tried to check the HARD drive or to reinstall Win XP?

• The hard disk Partitions and Factory Reset

  Hello

  I bought my HP Pavilion g series and I used it for awhile, then I decided to install Ubuntu as well as I want to do shows. I partitioned my hard drive and I made a mistake, and the hard drive is now labeled as 'Simple Volume'.

  I want to change the Partitions to 'go primary. " I tried to do a sytem of the HP recovery partition recovery, but the option is disabled.

  Also, I want to partition my Hard drive as I have 100 GB for Windows 7 and the 650 GB remaining for my files and documents so that I can access from my Ubuntu as well.

  If there is a way to change the Partitions back to primary Partitions and safely the partion it again, I will be relieved to hear and to implement.

  Thank you

  Try EaseUS Free Edition to convert your dynamic hard drive in Basic.You will have to delete the extra partition you made first.

  http://www.partition-tool.com/EASEUS-partition-manager/comparison.html

• Cannot open the CC app after upgrading to El Capitan.  What can we do?  Thank you.

  Since I upgraded to El Capitan, the CC app does not open no matter what I do to it.

  What can we do?

  Really appreciate your help.

  JMS

  Hello

  Please remove Creative Cloud app and Adobe Application manager using the-

  • https://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems.html

  Install the cloud creative app - https://helpx.adobe.com/creative-cloud/help/install-apps.html

  Hope this helps!

• Cannot open the hard file. One of the disks in this virtual machine is already in use by a virtual machine or a snapshot

  Hi all

  Tried my level best to solve, but still the same problem persists. . Lck tried but as soon close VMware workstation, it disappears. This problem starts when yesterday instead of powering down, suspended. The next resume when it gives captioned error. Tried creating new virtual machine using an existing vmdk file but my mainly all the data disappeared. Now I want to resume the suspended state. Kindly help on the same. Thank you

  OK, we will first focus on the first virtual disk (System) on the D: drive which has enogh of disk space to create a clone.

  The "Windows Server 2003 Enterprise Edition.vmdk" dated from 19/07/13 is probably exactly what we need, and if it has approximately the same size of file than current/changing, then you can replace the one changed with it. Once restored, proceed as follows (with VMware Workstation closed):

  from the command line run:

  cd /d "C:\Program Files (x86)\VMware\VMware Workstation"
  cd /d D:\win2k3
  md Clone
  C:vmware-vdiskmanager.exe -r "Windows Server 2003 Enterprise Edition-000002.vmdk" -t 0 "Clone\Windows Server 2003 Enterprise Edition.vmdk"
  

  Once the cloning done so, create a subfolder "Backup" and move all over existing files (as a backup). Copy the .vmx file and .vmxf the subdirectory "Backup" in the D:\win2k3 folder, then do the same with the file hard cloned since the 'Clone' subdirectory, so that you end up with the following files:

  Windows Server 2003 Enterprise Edition.vmx

  Windows Server 2003 Enterprise Edition.vmxf

  Windows Server 2003 Enterprise Edition.vmdk

  Before you can try to start the virtual machine, you must edit the .vmx file and replace

  scsi0:0. FileName = "Windows Server 2003 Enterprise Edition - 000002.vmdk"

  with

  scsi0:0. FileName = "Windows Server 2003 Enterprise Edition.vmdk"

  Please do the above and report. If you have any questions please ask.

  André

• Satellite A205-S4797 - cannot load the hard disk drivers

  OK, got my Satellite about 1 year ago (warranty has expired in September, it took a DUMP in October) :_| thought it would be just as good as my other hand, I think that it is Vista I hate, still had some kind of problem. I tried recovery disks that they even run that it says can not find * PREINST2.swm* after several attempts I gave up and bought Vista to reinstall because it wasn't loading drivers to repair the installation.

  Now cannot yet complete a clean install. Can someone please tell me how to load my disk drivers or where I can find them?
  And now, when it starts up it says hard drive failure may be imminent at this stage, I want to just get to the top and runnig and I managed to install XP but only SP1 and all my device drivers aren't compatible.

  Been without Toshi3 for 2 months and my children took on others and now my little desk! :|

  Help, please

  Can meet us on http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=140519? ;)

  I do not understand why post you twice, but hey it's your decision.

• Cannot open the Control Panel, add and remove flashes then disappears

  Original title: Add and remove flashes then disappears

  can get the control panel but when add and delete is pressed it flashes then disappears. someone help me please

  Hi Deovolente36,

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  Follow these methods.

  Method 1: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Method 2: Perform a System Restore and check if the problem persists.

  Method 3: Create a new user account.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

  If the problem is resolved in a new user account, and then follow the article on how to fix a corrupted user account.

  How to copy data from a corrupted to a new profile in Windows XP user profile

  http://support.Microsoft.com/kb/811151

• When I right click, the same context menu opens (menu hyperlinks, with "Open link in a new tab", etc.) no matter what/where I do a right-click.

  No matter where I right click on a webpage displayed (NOT the bar menu at the top of the screen), in computer text highlighted, a white spot in a Web page, or whatever it is, the shortcut menu for a hyperlink appears upward (with options to open it in a new tab, window or private (, bookmarking), and none of these options actually do anything, even if it is a hyperlink, I'm clicking. With the help of shortcuts like Ctrl + click on work very well. I have not recently installed plug-ins, and it only started a few hours ago. Wat do I do?

  Try disabling Firebug and see how it is.

• cannot open some files, get a runtime error. No matter what?

  When I try to access some files on the internet I get a runtime error and the site is stopped

  Hello

  Try this link: http://support.microsoft.com/kb/822521

  If this doesn't work, try updating your version of .NET Framework.
  Link: http://www.microsoft.com/en-us/download/details.aspx?id=17851

  Good luck
  _________________
  M3HR
  http://m3hr.TK
  E-mail address is removed from the privacy *.

• Windows recovery system cannot read the recovery disk

  I have Vista laptop computer model pavilion POS, when I bought it, I made a creation of recovery disks, but now when I put it in my PC to see contains I see an error that Sandra insert your disc and system cannot fix it and I also used microsoft fixed it Center but cannot fix it.

  Hello

  Here are all the HP information on different methods to recover back to factory settings

  Three ways to recover the PC to original operating status

  You have a choice of three ways to run a recovery and restore your computer to its original state. The recovery process may take an hour upwards or more and is not complete until the prompt to connect to the computer. When the recovery is complete, don't forget to run the update of Microsoft Windows and the HP health check to install all the drivers updated and software.
  1. If the computer can boot to the Windows desktop, start the Recovery Manager.
  2. At startup, press f11 to start Recovery Manager.
  3. Restore the PC to its original state with the HP Recovery Manager of in Windows Vista
     If the PC can be started and opens on the Windows desktop, you can use the HP recovery disk to restore the PC to original factory State by following the steps below.
     1. Click Start and enter the recovery in the field of research. Select Recovery Manager in the list, when it becomes available. Allow the action to proceed, if you are prompted. The HP Recovery Manager opens.
        Alternatively, click Start , all programs , Recovery Manager , and then Recovery Manager . Allow the action to proceed, if you are prompted. The HP Recovery Manager opens.
     2. Click Advanced options , System Recovery , and then click Next . The PC will restart and reopen the Recovery Manager.
        Alternatively, if the advanced options is disabled, click Next , and then System Recovery . The PC will restart.
     3. When the PC restarts, select the System Recovery option and click Next .
     4. If you are prompted to use the Microsoft System Restore , click No and then click Next .
     5. When you are prompted, select back up your files first (recommended) , and then click Next . Follow the on-screen instructions.
     6. When you are prompted to recover without backing up your files , please STOP before you click Next .

        CAUTION:

        It's the last chance to change your mind recovery PC and delete all the files and programs. Once you click Next , the restore process cannot be stopped

     7. If you are convinced that you want to start the recovery process, click Next . The PC immediately starts formatting the disk hard drive and destroy all data.
     The recovery process may take up to several hours and will return the PC to its original state. All custom, settings drivers, software and upgrades or hardware updates are lost and must be reinstalled.
     Restore the PC to its original state with the HP Recovery Manager if Windows Vista is not accessible

     If the PC does not start under Windows, it may still be possible to use the HP recovery disk to restore the computer to its original state. The Recovery Manager can be started during the boot process by following the steps below.

     1. Press on the button / stop to start the PC and press the f11 key when the standard BIOS guests appear on the black screen.

        NOTE:

        By pressing the f11 key at startup on a computer with an image factory HP will start the system recovery process, even if the message is not displayed.

        • If the HP Recovery Manager can access the hard disk recovery partition, a prompt to back up user files before you start the recovery
     . Follow the instructions.
     • If the HP Recovery Manager cannot access the hard disk to resolve system errors, you need to use the recovery disk custom that you created to recover the hard disk to its original state.
     • If you have not created the custom recovery disk, or disks are damaged, you can order a replacement of HP recovery CD.

  4. When the Recovery Manager starts, follow the instructions of recovery step by step , shown above.
  Solve a common problem of recovery.
  If the original operating system is changed to a non - Vista OS, the Recovery Manager cannot be launched either office or by pressing f11 at startup. You can use the recovery disk to restore the computer to the original state of Vista. If you are using a non - Vista OS, you can use a third-party partition management program to recover hard disk space.
  Restore the PC to its original state with the recovery discs

  If the PC cannot access the Windows desktop, and the Recovery Manager cannot be started by selecting the f11 at startup key, you can use either the recovery disc custom that you created, or you can order a recovery CD to replace HP, to boot the PC and restore the hard drive to its original operating state.

  NOTE:

  Run the recovery process by using the custom recovery disk you created can take less than an hour, while you use replacement discs ordered directly from HP can take four to six hours and includes several reboots.

  If the HP Recovery Disk Manager can access the hard drive, it will attempt to repair the recovery partition. If successful, a prompt to continue execution of the recovery using the Recovery Disk Manager.

  Use the recovery discs to restore the PC by following the steps below.

  1. Insert the recovery disc into the optical disc drive and start the computer.
     If the computer is running, insert the reinstallation disc and immediately click on Start and select restart to force the computer to boot from the recovery disc.
  2. When prompted, Press any key to boot from the CD or DVD, press any key on the keyboard.
  3. Leave the recovery disk boot and load the files required, while the Microsoft loading screen appears. It may take several minutes to load the required files.
  4. When the HP Recovery Manager window appears, click Advanced options , System Recovery , and then click Next to open the Recovery Manager.
  5. Follow the on-screen instructions and perform the necessary actions.

     NOTE:

     Do not interrupt the recovery process even though the computer may restart, and the Windows desktop can display at different times.

  • When you are prompted, follow the on-screen instructions to backup user files.
  • After completing the backup, when you are prompted, reinsert the recovery disk, and then click Next to continue the recovery process.
    A status box is displayed to indicate the State of the recovery and the estimated remaining time.
  • If you have used several disks when you created the custom recovery discs, follow the prompts to remove the first disc and insert requested discs.
  5. When you are prompted to Insert additional driver disk , take one of the following actions:
     • If you purchased a replacement of HP recovery disk and it included an extra driver disc, insert the disc, and then click OK or Next . The recovery program checks the additional drive and installs the necessary files.
       After you install the additional files, a prompt to remove extra disc and insert the original recovery disk.

     • If you bought a replacement at HP recovery disc, and he didn't get an extra driver disk, click ignore or Cancel . The recovery program will ignore the request and install the following file on the recovery disk.

     • If you have created a personal recovery disc, press Next to continue.

  6. Continue following the onscreen instructions to complete the recovery process.

  NOTE:

  If you have not created a personal recovery disk or the recovery disk will fail or corrupt, see HP - order recovery discs for Windows 7, Vista or XP laptops for more information.

  7. VMDKMounter gets error "could not open the virtual disk.

     I have two Win7 x 64 virtual machines running fine with VMware Fusion 4.1.2.  I installed VMDKMounter from VMware 3.1.3 and OSXFuse 2.3.9.  I can ride one of the files hard with VMDKMounter very well, but others told "Cannot open the virtual disk" when I try to mount it.

     8 June 14:43:27 hoth [0 x 0-0xe50e5].com.vmware.vmdkmounter [2394]: could not parse the instant string ' / Users/finchr/Documents/VirtualMachines.localized/hoth.univ.dir.wwu.edu.vmwarevm/hoth.univ.dir.wwu.edu.vmx '. 8 June 14:43:27 hoth [0 x 0-0xe50e5].com.vmware.vmdkmounter [2394]: will not be able to take an informed decision, based on partial information. 8 June 14:43:27 hoth [0 x 0-0xe50e5].com.vmware.vmdkmounter [2394]: mount the drive read-only instead. 8 June 14:43:27 hoth [0 x 0-0xe50e5].com.vmware.vmdkmounter [2394]: failed to open the disc: disc encoding error (261993021117)

     The virtual machine that VMDKMounter fails to mount was created by VMware vCenter Converter 5.0 of a physical machine.  The virtual machine that works was created in VMware Fusion 4.

     Of course, the hard I really want to ride with VMDKMounter is he who fails.  No idea how to make so that he can get?

     Well, I see nothing in the disc DescriptorFile which prevents the hard mounted.

     So right now, you can mount other hard files, but not this one, then I have two suggestions...

     It would be to use vmware-vdiskmanager to create a new hard that will not go up and the other would create a new empty hard, then add it to a virtual machine, as well as one that will not go up and then start with appropriate optical disk or an ISO Image containing the appropriate tools/utilities in order to image the drive to the new empty.  I usually use Symantec Norton Ghost for operations like this.  Then maybe a new mounts with VMDKMounter.