Cannot open the table of contents in the project manager

I import updates from my subjects and I use RH7. I was working also on the table of contents. I produced my output and had left the project, but when I came back later I can't open the table of contents now. I double click and nothing happens. I right click and select 'Edit' and nothing happens. Someone at - it advice?

Thank you

Mike

Hello

Maybe try clicking on File > Load Default environment?

Then try opening the table of contents.

Maybe something went wrong with the placement of the table of contents Editor.

See you soon... Rick

Useful and practical links

Tags: Adobe

Similar Questions

  • Cannot open the project elements

    Hello!

    I use a MacBook Pro, El Captain, 2.4 GHz Intel Core i5, 16 GHz RAM

    Adobe Premiere Elements 12

    After you have created and saved a project I restarted my Mac. Then, after a restart I could not open the projector-elements:

    The following message if poster (in German) appeared: 'ist Das Projekt offenbar beschadigt. ES kann nicht open werden' (the project seems to be defective. It cannot be opened).

    I rebooted again and also tried to open project saved automatically - the same result files. Cannot open the project.

    Does anyone know how to save the movie...?

    Thank you in advance!

    Good news! Please mark this question as answered.

  • Cannot open the project file with write access.

    I saw that this problem has been reported before, but have yet to find a solution.

    I have my project file in an external hard drive.  When I plug the hard drive to another computer and want to save it, I get this message:

    "Cannot open the project file with write access.  The file may be locked, or you don't have permission to write to this location.  Select Save as... »

    I don't want to register as because other projects refer to this file and also my file is still going to be ruined.

    FYI two computers use Windows 7.

    All solutions?

    Right-click on the folder in Question and select Properties. Select tab security make sure you that you then add everyone to the list of users. Do you this by selecting edit and then add. Type in all members of the section of the object, and click ok. Then select all the user and check full control. Press Apply and we'll adjust the permissions for the folder and subfolders and files.

    Eric

    ADK

  • RTE de LV cannot open the project files that include references .lvlib in dependencies

    I am writing a DLL LabVIEW to inspect the LabVIEW project files, and I noticed that if a project has a .lvlib reference in its dependencies, then the Run-Time Engine is contradictory on whether or not he can find the project file:

    • Project.Open returns error 7 (file not found)

    • Project.GetFileLVVersion is a success

    Here are some excerpts from my code of G and C engaged in this behavior:

       int openStatus = StatusSuccess;
    char * projectVersion = createStringWithLength (VersionStringLength);

    printf ("Analysis %s\n", pathchaine);
    OpenProject (pathchaine & openStatus, projectVersion, VersionStringLength);
    printf (" project written in LabVIEW %s\n", projectVersion);

    If (openStatus is StatusSuccess)
    {
    printf (" Open the project file.") \n") ;
    }
    on the other
    {
    printf("Error: could not find Project file, or file was not a Project file (Error code %i).\n», openStatus);")
    }

    However, when running in the development environment, the two methods are successful.

    Is this a bug, and if so, is it fixed in 2014 of LabVIEW?

    Here's how you can reproduce:

    Prerequisites:

      1. LabVIEW 2013 SP1 32-bit

      2. ConEmu for a good console- https://code.google.com/p/conemu-maximus5/wiki/Downloads

      3. minGW for compilation of a program to use the LabVIEW - http://sourceforge.net/projects/mingw/files DLL

    reference .lvlib to break dependencies Project.Open in LV RTE

      1. Open the attachment in a temporary directory (e.g. c:\xtra\temp)

      2. Open "OpenProject.lvproj" in LabVIEW.

      3. Build 'Open library project'.

      4. ConEmu with a bash command prompt, navigate to the temporary directory.

      5. Type make

    $ make
    patch the file "builds/platdefines.h.
    GCC - std = c99 g OpenProject.c o OpenProject.exe - lOpenProject - Lbuilds

    6. type "c:\xtra\temp\OpenProject.lvproj" OpenProject

    OpenProject $ 'c:\xtra\temp\OpenProject.lvproj '.
    Analysis c:\xtra\temp\OpenProject.lvproj
    Project written in LabVIEW 13.0
    Open the project file.

    7. the opinion that both call nodes execute correctly.

    8. type "c:\xtra\temp\OpenProjectWithLvlibDep.lvproj" OpenProject

    OpenProject $ 'c:\xtra\temp\OpenProjectWithLvlibDep.lvproj '.
    Analysis c:\xtra\temp\OpenProjectWithLvlibDep.lvproj
    Project written in LabVIEW 13.0
    Error: Could not find the project file or file was not a project file (error code 7).

    9. notice that the node version managed while the open failure.

    10 type diff OpenProject.lvproj OpenProjectWithLvlibDep.lvproj

    $ diff-u OpenProject.lvproj OpenProjectWithLvlibDep.lvproj
    -OpenProject.lvproj kills Nov 4 11:28:28 2014
    +++ OpenProjectWithLvlibDep.lvproj kills Nov 4 11:32:37 2014
    @@-13,7 + 13.11 @.
    true
    fake

    -
    +
    +
    +
    +

    +



    true

    Here's another way to trigger this behavior, which shows that LabVIEW occasionally Range the element dependencies:

      1. Open "OpenProject.lvproj" in LabVIEW.

  • Add to the project a new VI and place the constant path of file "Application Directory" his block diagram.

  • Select ""leader "Save All (this project)" and use the default name for the new VI.

  • Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject

  • Notice that there is a mistake once again, as is expected.

  • Remove the "Application Directory" path of file constant

  • Select ""leader "Save All (this project)"

  • Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject

  • Note that the problem has disappeared, as is expected.

  • Add the "Application Directory" path of file constant in the block diagram.

  • Select ""leader "Save All (this project)"

  • Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject

  • Notice there is no problem, which is surprising, because that there should be a mistake because the dependencies item was not tidy.

  • Close the new VI and pull out of the project.

  • Select ""leader "Save All (this project)"

  • Open "OpenProject.lvproj" in a text editor.

  • Note that the dependencies item was put away.

  • Add VI back to the project.

  • Select ""leader "Save All (this project)"

  • Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject

  • Notice that there is a mistake once again, as is expected.
  • NInjaneer_wow wrote:

    The same behavior occurs in LabVIEW RTE: a new project with a constant of the Application in an empty vi directory will return an error 7 - file not found, but still return the correct version of LabVIEW in which the project was created.

    I did experiment with workarounds for this problem, and I found a.

    When I used to get the path of LabVIEW libdir in the ini of the executable file, execution is able to load and inspect the project file.

    LIBDIR = 'C:\Program NIUninstaller Instruments\LabVIEW 2013'

    While it is expected that a stand-alone executable can be placed on a system that does not have the LabVIEW IDE, it is still surprising to me that the execution engine cannot find standard library of LabVIEW without some explicit guidance. What other factors contribute to this behavior?

    References:

  • Cannot open the project

    I am trying to open a project on another computer, but I'm having some trouble. I followed the steps of the tutorial: http://agile.csc.ncsu.edu/SEMaterials/tutorials/import_export/ but I have a red exclamation point icon when I open the project. The classes are riddled with red error and it cannot be run in the Simulator (Run As - > Simulator does nothing). I noticed that the file on the first computer has a net_rim_api jar file and the other is not. I don't know if this is the problem and if it is I don't know how to import it. The error given by the section of the problem of the eclipse is:

    "Project cannot be built until the path of errors are resolved" and "container Unbound classpath: ' JRE System Library [BlackBerry JRE 6.0.0] project"MyProject"


    The appropriate BlackBerry Java SDK has been installed in Eclipse on machine problems?

  • Cannot open the project created during the trial period

    I've made use of the 7 day trial period and started with two projects. After 7 days, I have purchased Premiere Pro for a month. Now I can't open the projects more. The error message is: it should contain a sequence that could not be opened. No preview of the sequence is preset file or codec might be associated with this type of sequence...

    Very strange and annoying. It seems that the trial had several codecs then the product? Projects already took me many hours, so it bothers me really, mostly because I thought that I must pay for exactly the same product I have used during the trial.

    What can I do about it?

    Missing features and sequence Presets - sequence could not be opened

  • Implementation error "Adobe RoboHelp 8 has encountered a problem... ».  Cannot open the project

    Windows XP / RH8 / RoboSource Control 3.1

    Tried to open a project that I have not consulted for while.   After you click Yes or no to the question «Get latest...» "I get the error"Adobe RoboHelp 8 has encountered a problem and needs to close.  We are sorry for the inconvenience. »

    I tried several times with the same results.  Forum search finds several results, but see nothing that corresponds to that.

    I think it may be a project file to remove that can allow me to open the project, but thought I should ask first.

    Any help will be greatly appreciated.

    Joe

    Remove the CPD file allowed me to open the project in HR

  • RH8 Word cannot open the project RHx5

    I REALLY have to update an existing project of RHx5 WinHelp. We have updated last year from Office 2003 to 2007, which forced / allowed me to update RHx5 RH8 and RH8 for Word has been installed on my XP pc.

    Tried to open the project RHx5 and received the error: bad DLL calling convention (error 49)

    Given that the attempt had opened a blank Word document, I tried to close it, but failed, with an another error message indicating that a dialog box is open - despite no dialog being visible at this time.

    Can anyone offer helpful suggestions or advice?  I would be very grateful, because our software (rather old) depends on ID card HR to provide contextual assistance.

    See extract of 92.

    http://www.Grainge.org/pages/snippets/snippets.htm

    See www.grainge.org for creating tips and RoboHelp

    @petergrainge

  • Cannot open the project; Cannot find the folder for this project

    I have Encore CS4 and when I opened it, I clicked on "Create a new project" and he chose my office as the location target. Then when I click on the file from my desktop or reminder, I get the following message appears: "unable to open the project; This project file was not found. But the folder and the file exist. The file extension is .ncor what I am doing wrong?

    Still worked for you before?

    If so, what has changed?

    If not, you run as administrator?

  • Cannot open the project (CS4 - trial)

    After futzing and cleaning several projects, I am now unable to open them.  Maybe I changed the video preview of Microsoft AVI to I-Frame.  I get the following message appears when I try to open the projects:

    The draft contained a sequence that could not be opened.  No preview of the sequence is preset file or codec might be associated with this type of sequence.

    Is there a way to fix this situation rather than having to start over from scratch as I already have one project?

    Advice, suggestions or any errata would be most welcome!

    Futzing and caused cleaning, or the trial version. The trial does not support anything MPEG.

  • Cannot open the project first exported from After Effects

    I was working on something in After Effects, basically just audio and video clips. Editting really. I decided, would be faster in the first, so I exported to a project of creation of it.  When I try to load it in first I get an error "the project seems damaged, it cannot be opened.  Does anyone know if there is a way to solve this problem?

    It does not cause a problem for me, and we have heard this on the forum that I can remember.

    Try to create a new model in a new project. Add some video and audio. Who exports OK?

    I don't want to be rude and in no case I want to be insulting, but I'd feel bad if I didn't, and it turns out to be the problem...

    Since it is the symptom if you try to open a project created in Ae with Premiere Pro CS6 - Pr please check that you open the good Premiere Pro. I forget what icon which is timely and open CC I want to open CS6, although I never did the opposite error. Yet.

  • Cannot open the project on final cut pro :(

    Hey guys, I have a big problem.
    I edited a video which is about 1h30m and using the function "Multicam clip", and successfully made and made a DVD. but unfortunately I need the second edition. Then I opened the library file, click the project, Final Cut Pro X continuous loading and close unexpectedly, and another project to another event works normally. anyone with the same problem? I need to send it to my tmr customer

    p.s. I deleted the file, preferably according to most of the Q & A.

    What version of FCP are you running? If it's the 10.1 or later, projects are in the events that are contained in libraries.

    If 10.1 or later, is the DVD project that does not open in the same library as the project is open? Or they in different libraries

    Russ

  • Cannot open the Task Manager (replace Win 7 Task Manager) in Windows XP Professional SP3

    Hi guys, my computer is Windows XP Professional SP3, my problem is the Task Manager can't open because I change for the Windows 7 Task Manager to test open this software. I have FORGOTTEN to save the original Win XP Task Manager!

    HOW CAN I DO? I want TO RESTORE to Original Win XP Task Manager...!
    Can anyone please help me and wants to give me a link to download the original task manager Win XP...
    BillyRazOr

    Hello

    What do you mean exactly by changed the Windows 7 taskbar taskbar?

    You can restore the system and check if the problem occurs. Follow the steps in the link:

    http://support.Microsoft.com/kb/306084

  • First Elements 11. Cannot open the project (file PREL) in point 8.1 of Windows.

    I created the project (file PREL) in the first 11 elements in the Windows 7 Professional environment. I was able to open it without problem.

    Now I have Windows 8.1. When I try to open this project, I have a saying "this file type is not supported, or the required codec is not installed."

    Help!

    Levalt

    Thanks for the reply.

    When you import media source in a first Elements (any version), you are not importing real media. What you have in the media of the project are copies of the originals which are stored in the designated place hard drive. But the project needs to trace these originals to the save location as they were when they were imported in the project. If you move the source media, delete rename them or even that they are in the folder, you will encounter some bad media reconnect issues. At this point, the message "Where is the file...?" that you get when you try to reopen the saved closed project will be a major asset by her reconnects. Alternatively, you can use the function replace images for her reconnects.

    The following links go to the above factors...

    http://help.Adobe.com/en_US/premiereelements/using/WS09e4b3c48f3a79fc19b622510385d4355c-7d cb.html

    http://www.atr935.blogspot.com/2013/04/pe11-replace-footage.html

    Troubleshoot damaged projects | Adobe Premiere Elements

    Do not hesitate to ask if you have additional questions on this or need for clarification on what written.

    Best wishes.

    RTA

  • Cannot open the project after the reinstallation of RoboHelp 8

    My computer crashed and I had to Reinstall RoboHelp 8.  When I tried to open my project, I got a message saying that the project is from a newer version of the program.  This project is no longer compatible with this version.  Then I did the 8.x updates and got the same results.

    What do you think the problem is here?  My RoboHelp is a upgraded version, and I do not know what version it was modernized at the origin of.  Everything worked perfectly before that.

    In addition, my computer installed Windows 7 on my computer and I already had Vista - what part of the problem?

    I need to get this project open and run as soon as possible.

    Thanks for any help that anyone may be able to offer.

    What you should not have done, is to open a project before you apply the updates. See the projects on my site.

    It's very late here now. Post your progress and I'll look in the morning.

    Maybe remove the CPD will fix. First backup.

  • Cannot open the project already created

    I'm total Flex beginner and I tried a lot of ways how to open a project existing Flex, but it seems too complicated for me. I think the problem is I have no standard project source.

    Please take a look at this source here picasa-image - express.swf_SRC.zip

    Can you please write a small manual how to open this project and compile it to SWF?

    Step 0. Unzip the file.
    Step 1. Start Flex Builder (I use version 3)
    Step 2. FLIE/new/Flex project
    Step 3. Name the main project, and then click on finish
    Step 4. Open the main.mxml file unzipped in some editor/Notepad & all copy and paste into Flex Builder instead of the default code.
    Step 5. Copy the components and the pkg file in the zip file to the project and paste it in the folder src Flex.

    That will allow the project to build, there are a few other resources to run it really, but I hope that this info is in the place where you got the zip file.

    Good luck, I'm a beginner too but takes advantage of learning Flex.

Maybe you are looking for

  • security issues is loss

    Please reset my questions I submit new questions

  • Printing problems with MAC OS x 10.7

    I have a new MAC with LION installed and I got a curious experience involved printing with both my HP printers: CM1312nfi and C1120n. In the first instance, after one by one by apple-store settings, printers worked, after a few days, they could be de

  • I get this same error code 19

    "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) » However I'm running on windows 7 pro 64-bit.  I have two drives with the same error code 19, one is a blu ray

  • Problems install "HP Deskjet F2200/F2224 all-in-One Printer series full feature software and driver.

    Printers: HP Deskjet F2280Operating system: Windows 8.1 Computer: Dell Insperion a 2330 When trying to install the full feature software & driver I confronted with the following problems: I downloaded the driver & software above ok The Installer star

  • Add under "Setting up groups" RADIUS attributes ACS 4.2

    Hi Security Experts, I need to add RADIUS attributes to a custom under the 'Groups Configuration' page provider ACS 4.2. From now on, I see of Cisco Aironet RADIUS attributes. IETF RADIUS attributes etc in the page "setting up groups. How can I ensur