Cannot open Windows mail, WinMail.exe - Unable to locate component, could not start because SHELD32.dll was not found

Similar Questions

• Explorer.exe Unable to locate component, this applicationfailed start because BROWSEUI.dll was not found, can access windows taskbar or white screen homepage

  Tried the boot failure, etc, but not good, were not the original windows disks

  Duplicate thread:

  URL: http://answers.microsoft.com/en-us/windows/forum/windows_vista-system/browseuidll-was-not-found/7ef0bd88-ec8f-4a5a-bde2-43d0f94cab03

  Title: BROWSEUI.dll was not found

  Details:

  I use Windows Vista Basic (build 6002 sevice pack 2) as widows try to open I get the message, cannot start Windows (explorer.exe Unable to locate component) then a message (this applicationfailed start because BROWSEUI.dll was not found, reinstall the hotfix applicationmay) it's folled by a message (windows explore stopped working) I'm then left with a blank screen bar none tasks or a desk top, the only way to access the internet is through the Manager tasks, but I have no access to windows

  Hi, AlanWalker1885,

  FYI: A moderator will pass this thread to the appropriate forum.  The post belonged in the Internet Explorer forum.  Please take note of the drop-down menus when you click on the link below.  Thank you.

  http://answers.Microsoft.com/en-us/IE/Forum/ie7_6-windows_xp

  Do you have any friends who might copy the file browseui.dll from their Windows XP CD to a flash drive?

  Have you tried to register browseui.dll?

  1. At the command prompt, place you in the %Windir%\System32 folder.
  2. Type regsvr32 browseui.dll/u, and then press ENTER.
  3. Type regsvr32 browseui.dll, and then press ENTER.
  4. Restart the computer

  See the solution given here:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/error-message-browseuidll-file-is-not-a-valid/04b33b18-d87c-40AE-BE35-71720dbbbab2

• Error: mmc.exe - Unable to locate component. This application has failed to start because apphelp.dll was not found.

  Original title: this application has failed to start because apphelp.dll was not found.

  A window titled "mmc.exe - Unable to locate component" in the title bar, which includes the message:

  "This application has failed to start because apphelp.dll was not found.  Reinstalling the application may fix this problem. »

  that appears when you access many of the 'administration tools' in the start menu.  e.g. component, computer, event viewer Management Services, etc.

  I'm afraid I accidentally deleted apphelp.dll when cleaning on other files.  I found copies of apphelp.dll in following two tracks.

  AppHelp.dll C:\WINDOWS\$NtServicePackUninstall$ 124KO Extension Application 09/08/2004

  AppHelp.dll C:\WINDOWS\ServicePackFiles\i386 123KO Application Extension 04/13/2008

  I tried Recuva, but he could not find the file.

  How to re - install a such apphelp.dll suggested by the pop - up error message window?

  Thank you

  I thought it would be something that began with "A".

  For low overhead and free, think of Microsoft Security Essentials (MSE).

  MSE and a regularly good scan with the definitions updates using MBAM and SAS (from post above) should keep you in good shape according to your Internet habits.

• wlmail.exe - Unable to locate component trying to open MSN and Hotmail

  Hello.  I've never posted a question but that's.  We are unable to access Windows live messenger, Hotmail, etc.  We receive an error message that says app could not start because wlidcli.dll was not found. Reinstall the application might solve the problem.  Then windows says it's a problem with the ATI graphics driver.  Have not the slightest idea what to do.  Help

  Hello

  The question you have posted is related to Windows Live Messenger/Hotmail and would be better suited to the Windows Live community. Please visit the link below to find a community that will support what ask you

  http://www.windowslivehelp.com/product.aspx?ProductID=2

• apdproxy.exe - Unable to locate component

  Start a box opens about five times faster that you can close the box that has the following words;

  apdproxy.exe - unable to locate component

  This application has failed to start because AocCache.dll (and in the next box AdobeQt.dll) could not be found.  Re-installing the application may fix the problem.

  In addition, I'm unable to open Adobe Photoshop Album Starter Edition 3.2.

  Hello

  Did you change your computer?

  I suggest you to follow the methods and check.

  Method 01:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 02:

  I also suggest you to uninstall and reinstall Adobe Photoshop Album Starter Edition 3.2

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

• "SiSUSBrg.exe.exe - Unable to locate component" appears at startup. "This application has failed to start because SIS_Lib.dll is not found."

  Original title: SiSUSBrg.exe

  "SiSUSBrg.exe.exe - Unable to locate component" appears at startup. "This application has failed to start because SIS_Lib.dll is not found."

  Hope that this is not a virus!  Help?

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353
  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.

• Lsass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found

  Original title: oleaut32.dll xp

  My system XP pro/sp3 does not start normally, without danger or with the original sys disk. I get a message
  Isass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found. reinstalling the application may fix this problem.
  However, I can't in the operating system to do a re-install.
  Any suggestions?

  If c:\windows\system32\oleaut32.dll is missing, you will see messages like this:

  Lsass.exe - Unable to locate component
  This application has failed to start because the OLEAUT32.dll file not found.  Reinstalling the application may fix this problem.

  If the missing file is the only problem, you might have to do a reinstall to fix.

  There should be a copy of Oleaut32.dll in the c:\windows\system32\dllcache folder, so if you can get in the XP Recovery Console, you can just replace it - then you are going to have to start on something to do.

  Once started in the XP Recovery Console, you must enter this command at the prompt:

  Copy c:\windows\system32\dllcache\oleaut32.dll c:\windows\system32

  If the file is not in the dllcache folder (it should really be), depending on your installation, this command can work:

  Copy c:\windows\servicepackfiles\i386\oleaut32.dll c:\windows\system32

  Answered in the affirmative if invited to replace any existing file.

  I don't know what the Microsoft Support Engineer think that KB307545 or KB922371 will help you.  I think that the MSE is just throw a few things to try and some links.  You don't describe symptoms consistent with the need to use one of these methods.   I would say the MSE has never seen this problem before, made no attempt to reproduce the problem, and has no idea how to fix this.

  If your CD does not start in the Recovery Console, or if you don't know what kind of CD do you have to do a CD of XP Recovery Console and boot on it (no media XP required).

  Here's how:

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  After replacing the file, remove the CD and type 'exit' to leave the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Win SAT.exe Unable to locate component MSVCR100.dll was not found

  I get error when you try to use REFREASH NOW in control of Panel\Performance information and tools is when the error # Win SAT.exe Unable to locate component MSVCR100.dll is not found appears. I guess that I need this file can someone please HELP me thank YOU

  Hello

  Were there any changes made to your computer before this problem?

  Perform the steps mentioned below and check if that helps:

  Method 1: SFC scanner on the computer to ensure that the system files are intact:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: Follow the steps proposed by O of Marilyn and check if this may help:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/the-program-cant-start-because-msvcr100dll-is/5c9d301a-2191-4EDB-916e-5e4958558090

  I hope this helps.

• "mwlDaemon.exe - Unable to locate component. Application has failed to start because sysenv.dll was not found. Reinstalling may correct the problem.

  Vista message mwlDaemon.exe error
  At the start of Vista, I get the message "mwlDaemon.exe. - unable to locate component Application has failed to start because sysenv.dll was not found. Reinstalling may correct the problem"Question is how should I do this? Most programs work OK, but I think the problem might be preventing a backup is made.

  Hi Thegardener,

  ·         How long have you been faced with this problem?

  ·         You did changes to the computer before the show?

  Follow the steps below for a possible solution:

  Method 1: I suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

   

  Method 2: If the method above is not enough, you can try to uninstall and reinstall the application.

  You can see the article for more information about the uninstall of a program.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Hope this information helps.

• vSphere CLI - perl.exe - Unable to locate component

  Hello

  I installed the vSphere 4.1 CLI on Windows Server 2003 SP2 (x 32) and when I try to connect using the vicfg - nas.pl it gives error below. W2K3 x 32-bit is supported according to the vSphere CLI document. I don't know where he's going wrong then.

  
  Perl.exe - Unable to locate component

  This application has failed to start because libxml2.dll is not found. Reinstalling the application may fix this problem.

  
  Any suggetions would be appreciated.

  Thank you

  Installation of Perl is not in the Path environment variable. To the Path environment variable, add the following location:

  I think that the installation of Perl is not in the Path environment variable.

  C:\Program VMware VI CLI\Perl\bin remote

  -Right click on my computer
  -Select properties in the context menu
  -Select advanced system settings
  -Click the Environment Variables button
  -Select the path in the System Variables and click on change
  -Add the following line «;» "C:\Program VMware VI remote CLI\Perl\bin" to the Path variable

  Restart the command prompt for the path access is taken into account

• TPSMain.exe - Unable to locate component

  Whenever I start my computer, the following error message appears TPSMain.exe - Unable to locate component-
  This application has failed to start because TPwrReg.dll is not found. Re-installing the application may fix this problem.

  Nobody knows what it means and what I can do about it.
  Help, please

  Hello

  tpsmain.exe is a process associated with Toshiba laptops. He manages the power save function to ensure that the system goes to a power saving mode when it is not used.
  I would recommend to eliminate energy saver completely from the BONE by using Add and remove the option programs in the control panel. Then try again to install this Toshiba utility again. You can use this software to the tools & utility Cd or you will check the download page to Toshiba for latest updates

• Tecra M9 - TPSMain.exe cannot start because CpePerf.dll was not found

  Hi and help,

  searched the Web and found other discussions of the forum with similar questions.
  Tried all suggestions, nothing worked. I'm not very good on the computer but you can find my way. In any case...

  After connection messge pop messages - up in succession, similar to: TPSMain.exe cannot start because CpePerf.dll was not found then: TPSoddctl.exe cannot start because CpuPerf.dll not found

  Computer works very well but Power Saver start is not automatic and can't select it from the Panel... "" Toshiba power saver does not work. "
  so select the power options... "could not start because the CpuPerf.dll is not running.
  Did all the research on the net and followed all the tips... i.e. unistall saving in safe mode, uninstall toshiba common utility can uninstall fatal error 0x7e

  Then download Ccleaner, inspections, uninstall with Ccleaner same fatal error.
  In support of Toshiba and tried to install Power Saver... same problem will not install.

  Thus help help help if possible.
  Computer works well but popping up messages are annoying and I'd love to sleep to extend battery.

  Tried the system restore, even though I doubt that it affects the files... Another problem "cannot complete system restore"... tried this several times and cannot restore the system either... What is happening?

  any help please
  Tim

  Hello

  I think you can solve this problem, recover the laptop.
  But that would mean that the whole HARD disk should be formatted and would be installed everything again, I put t know if this is an option for you

  It turns out that something will not with the Toshiba Power Saver installed and, consequently, the popup message.
  Usually new installation of GST should help. But it was not and I m wondering why

  Maybe this is s question really an OS since system restore help (to the previous state) didn t

  He s strange question right now I can suggest only a new recovery

• AppleSyncNotifier.exe Unable to locate component. CoreFoundation.dll was not found.

  I get this warning in a pop-up for over 2 weeks now & sent a call for help to fix everything that can happen to cause this.     I heard of anyone.   The current pop-up States that the application has failed to start because CoreFoundation.dll was not found.   As said, it's that Windows would warn me if a solution is available.  Yet, I heard nothing.    Can I remove this foundation.dll core and where it is installed?   I looked in the start menu and introduced computer programs installed but did not see doing anything corefoundation nor I saw AppleSync Notifier.    Does anyone have a suggestion?

  John

  You can try an uninstall of all Apple products and hope that the message will disappear. However, who cannot always help. You may need to reinstall the Apple products such as iTunes, QuickTime and Hello and then uninstall so you receive the error message will disappear.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• service manager.exe - Unable to locate component.

  This application has failed to start because windows7features.dll was not found. reinstalling may correct this problem. I then click ok then Bau said duty manager has stopped working, it's every time I start computer I'm on vista Home premium. Can anyone help please.

  Hi EileenZK,

  ·         Did you do changes on the computer before the show?

  I suggest that you want to run the auditor of file system (CFS) analyze and see if this solves the problem.

  SFC toolscans system files and replaces incorrect versions of system files by using the correct versions.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I hope this helps.

• applesyncnotifer has stopped working unable to locate the component that this application has failed to start because corefoundation.dll was not found. Re-install the app

  Original title: applesyncnotifer has stopped working

  pop-up that said, apple syncnotifer.exe cannot locate the component.  This application has failed to start because corefoundation.dll was not found. Re - install the app may fix the problem.

  Hello

  It's all part of itunes

  Uninstall and reinstall itunes

  Follow the information from apple to the link below

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  http://support.Apple.com/kb/HT1923

  and or ask for their support of itunes

  http://www.Apple.com/support/iTunes/

  Also try the discussions of apple itunes

  http://discussions.Apple.com/category.jspa?categoryID=149