Cannot open windows on the laptop after the closure of unexpetodly

When turn on laptop, it tries to load windows then said sorry this unexpetodly closed, try to start safe mode network safe mode, or start windows normally, I tryd all of these solutions and does not always

Provide information on your system, the better you can:

What is your system brand and model?

What is your Version of XP and the Service Pack?

What is your Internet browser and version?

Your system's disks IDE or SATA drives?

Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

The afflicted system has a working CD/DVD (internal or external) drive?

You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

What do you see (exactly) that you don't think you should see, and when you see it?

What do not you think that you should see?

If the system works, what do you think might have changed since the last time it did not work properly?

If there is a problem starting, XP is configured to automatically try to start again and you can stuck in a loop not being able to go beyond the screen boot options, or none of these startup options you choose will work only.

Sometimes, when XP has a problem starting or falls down and tries to start again, it will give you a "short" menu of boot options and none of them will appear to be good to get your system going again.  Something like this:

Safe mode
Safe mode with networking
Safe mode with command prompt
Last good Configuration known (your most recent settings that worked)
Start Windows normally

You have tried them all!

The options are similar to the Advanced Boot Options menu XP, but the only option that you need (disable automatic error system reboot) are not offered, because XP went too far during the boot process and offers a limited number of boot options.

If this is the case, you must manually call the Options menu advanced boot yourself until you do not see the option:

Disable the automatic restart in the event of system failure

When you get the XP Advanced Options correct start menu you want to see, he has options on it like these:

Safe mode
Safe mode with networking
Safe mode with command prompt

Enable Boot logging
Enable VGA mode
Last good Configuration known (your most recent settings that worked)
Directory Services Restore Mode (Windows domain controllers only)
Debug mode
Disable the automatic restart in the event of system failure

Start Windows normally
Reset
Return to OS Choices Menu

You need to choose in this menu is the option:

Disable the automatic restart in the event of system failure

Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

If you miss the window of opportunity F8, you must try again and start tapping the F8 key with more urgency (earlier and more frequently) until you see disable automatic restart on system failure, and then select.

You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

If your system has a Blue Screen of Death (BSOD), we need to know what the screen says:

Here's a BSOD example showing information you provide:

http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

Send for the nose and the Red arrows (3 to 4 lines total).

Send all * line STOP message since there are clues in the 4 parameters.

If it looks like there is some kind of name listed in the STOP message file, send this line also.

Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.

Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.

Tags: Windows

Similar Questions

  • Cannot open Windows Mail several times after recording on my computer.

    Error message: "Windows Mail could not be started because another instance of it is still running on your computer.

    Error message: "Windows Mail could not be started because another instance of it is still running on your computer.

    Do a system restore. Choose the date where there is no problems as your restore point.
    Here is the link to the tutorial: http://www.vistax64.com/tutorials/76905-system-restore-how.html

    t-4-2

  • I tried to burn some pictures with music on a DVD using Windows DVD maker, but others cannot open or run the disc. I tried to use DVD-R and DVD + R, but nothing works. Any suggestions?

    I have created a slideshow with background music using Windows DVD maker on a DVD-R and DVD + R and others cannot open or run the disc. I can't run into a DVD player, but my computer it plays very well. Any suggestions?

    Lol it won't play in my DVD player either. Just the computer.

    =====================================
    This could be a hardware problem with your DVD writer
    but here's something you can try.

    Create your slideshow (photos and music) in the film
    Creator of... and then publish the file to a folder on your hard drive
    walk in the .wmv format.

    Windows Vista
    Getting started
    Windows Movie Maker
    http://Windows.Microsoft.com/en-us/Windows-Vista/getting-started-with-Windows-Movie-Maker

    Windows Vista-
    Publish a movie in
    Windows Movie Maker
    http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

    Then try to use the following free software to burn your DVD:

    (FWIW) It's always a good idea to create a system
    Restore point before installing software or updates)

    DVD Flick
    http://www.dvdflick.NET/

    Be sure to read the Guide:
    http://www.dvdflick.NET/Guide.php

    If you have problems to download DVD Flick...
    Try the following direct link:
    http://tinyurl.com/yzx9sck
    or...
    http://downloads.sourceforge.NET/project/dvdflick/dvdflick/DVD%20Flick%201.3.0.7/dvdflick_setup_1.3.0.7.exe?use_mirror=SoftLayer

    Save the file to a folder on your hard drive and
    install from there.

    Tutorials:

    Tutorial DVD Flick
    http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

    Burn any Format video DVD PC
    http://www.freevideoworkshop.com/dvdflicktutorial.htm

    To create a video DVD base that should play in a free
    permanent drive DVD... try the following...

    Good luck.

    First... read the DVD Flick Guide to familiarize
    with the program.

    Open DVD Flick and insert a blank DVD in your drive.

    If the window of Autorun from your computer... just close it.

    Click the project settings button and check... Video /.
    Target format... residents United States... Choose... NTSC /.
    Accept.

    The title button left click Add and navigate to your
    Video clips and select the ones you want on the DVD.

    You can have by selecting one and then use
    the up and down buttons.

    Left click on the button create DVD / OK / Yes / Yes.

    Please wait while the DVD is created.

    When the text "Completed successfully" is displayed you
    DVD Flick can close. Now you can eject your DVD
    and play in your DVD player.

    At some point you might want to buy more
    Advanced Cyberlink, Nero, Roxio, software
    Ulead, etc... but at least it is a start.

    Good luck.

    John Inzer - MS - MVP - digital media experience

  • Error message"the file is maybe damaged or corrupted 1610153464 / also cannot open projects in the background 26: 142

    Hi all

    I hope someone can help me.

    I use AE CC/Windows 7 on a Dell, 32 GB of RAM, 64-bit op system, processor: Intel (R) Xeon (R) CPU x 5670 @ 2.93 Ghz 2.93 Ghz (2 CPUs).

    So far I had worked on many projects with no problems and then a few weeks ago, project crashing non-stop. The problem has been resolved when I got rid of all the MP3s and diverted to RAM. Once again, it was a problem that I had not in the past and I don't remember changing anything whatsoever.

    Now, it seems that it is impossible for me to export/rendering a project in a Quick time or same AVI file. If its quick time, I get this message: unable to make failure of After Effects error one module output. The file may be damaged or corrupted -1610153464 and if I am trying to export with AVI I get this message: cannot open projects in the background AE 26: 142)

    What is happening with the various projects.

    I have read the forums on hearing that the problem may be a Bug with quicktime and H.264? I never had a problem with it before, but even once when I try to export AVI I get this error message:

    Cannot open projects in the background AE

    I have a feeling that it is associated with quick time. I uninstalled and reinstalled QT, but still not the problem. It will open the old QT files without problem. I tried to download an update of the correction of a bug as a proposed post but I think I have the final reason why it did not work.

    This project has a couple of quick media files H.264. Do I need to convert? They are the cause of all this?

    I'm sorry, I really tried to seek answers in the forums before contacting you here, but I can't find a reason for all this mess, which again appeared a few weeks without any problems for months... If someone can point out an area where I can start looking, I would really appreciate it. Thanks in advance.

    QuickTime H.264 is terrible. Do not use it.

    Use the AVI file, you have created in your Adobe Media Encoder and use the parameters of H.264 there.

  • Safari throws "Safari cannot open page because the server is not responding" error for most relationships other than Facebook, Google, Youtube and a few other sites on my Macbook Pro. Can anyone help?

    Safari throws "Safari cannot open page because the server is not responding" while Chrome throws an error "this site is not reachable, connection timed out" for most relationships other than Facebook, Google, Youtube and a few other sites on my Macbook Pro. Sometimes, however, I am able to get the site on Google and access one page other than the home page and everything on the site works fine afterwards. I use a Macbook Pro OS X El Capitan (10.11.5) running. Can anyone help?

    Test in safe mode, if it works back to the normal mode safe mode start-up to test again.

    Try safe mode if your Mac does not end commissioning - Apple Support

    Let us know if the problem occurs in mode without failure or even once after start in normal mode.

  • 'Cannot open file because the disk is not available' Mac

    I recently changed the selection of Photoshop (CS6) Scratch disk to the boot drive by default to one of the other internal drives in my MacPro (OS 10.6.8).

    When I restart Photoshop (CS6) I get the message:

    "Cannot open file because the disk is not available"

    and Photoshop will not start.

    I then restart Photoshop with 'Control - alt - shift' keys

    (suggestion to <http://forums.adobe.com/message/3937003>)

    and reset preferences that allows Photoshop to return.

    (Reset preferences returned the boot drive to drive work status.)

    I have an another MacPro, the - same 10.6.8 OS and Adobe CS6 - and I don't have this problem of allocation of work disk.

    What happens with a MacPro which prevents me from selecting one drive other than the boot drive working Photoshop

    Probably a permission problem.  Run the Apple disk utility to repair permissions.  If this does not work the glance to the non bootable drive and check "Ignore permissions..."  Open the window Info Finder and it came inside.

  • aftermath of the warning: cannot open projects in the background (26: 142)

    Renders take a LONG time to start with this dialog error appearing after that is being rendered.

    aftermath of the warning: cannot open projects in the background (26: 142)

    Any idea what would cause this?

    I'm running AE 11.0.0.378 on a Mac Pro 12 - core with 24 GB of RAM and a Radeon 5870 card.

    First of all, make sure that you installed the updates. Since the version number you posted, you have not installed the corrections was last updated.

    http://Adobe.LY/lsrkmJ

  • Cannot open or create the file... Permission denied

    I am a new user of LC Designer ES.  After creating and saving a form, I made changes and now cannot save.  Error message in the log report palette tab says "PDF generated successfully.  Cannot open or create the file [file name] permission denied. "No idea why this would happen and how to fix it?

    Thanks for any help.

    If the file is already opened in another application (such as Acrobat or Reader) then you wodul not being able to save as these apps put a lock on the form.

    Paul

  • Cannot open 'Documents' because the original item cannot be found.

    By clicking on the sidebar in the finder, received the error of the object:

    Cannot open 'Documents' because the original item cannot be found.

    I spend a lot of stuff around recently because of a SIN that went down.  A lot of backups, transfers etc.

    Just as moving things to normal.

    Have all my backup files.

    If I go to users / #username "/ Documents I get the following:"

    Cannot open the 'Documents' folder because you don't have permission to view its contents.

    cmd - I do not show Panel permissions at all, just said I have unknown access.

    Finally, the fold icon has a small blue arrow in a white circle in the lower right corner.

    I am the only user and admin.

    Do you use a data service on the clouds that fits in the Finder, like "Dropbox" or "Google Reader?"

  • How can you reduce all open windows on the desktop the buttons in the taskbar?

    How can you minimize all open windows on the desktop to the taskbar buttons

    Right click on the taskbar | Show desktop. Or you can add an icon to the taskbar.

    How to re-create the show the desktop icon in the Quick Launch toolbar
    http://support.Microsoft.com/kb/190355

  • My recipient Receive the answer that the file I sent is not available or that they cannot open all of the files that I send.

    My recipient Receive the answer that the file I sent is not available or that they cannot open all of the files that I send.  I have not had this problem in the previous version of Adobe send.

    We have seen this happen when the link you send is broken up in the recipient's email.

    Using anonymous or custom links? Anonymous, how you send the link to your recipient?

    If your recipient send the link to you, can you open the file it?

  • It seems that my xapauthenticodesip.dll is corrupt. Cannot open windows live photo gallery.

    Original title: xapauthenticodesip.dll

    It seems that my xapauthenticodesip.dll is corrupt. Cannot open windows live photo gallery.   How should I do?

    Hello

    The question you have posted is related to windows live photo gallery and would be better suited to the community of windows live. Please visit the link below to find a community that will provide the support you want.
    http://windowslivehelp.com/product.aspx?ProductID=20

  • Cannot open windows messaging because initialize junk filter MSOE. DLL could not be initialized

    Original title: initialize the MSOE junk e-mail filter. DLL could not be initialized

    cannot open windows mail

    Hi CyndiJackson,

    (1) since when are you facing this problem?

    (2) remember to make changes?

    Users have fixed similar problem by following the steps below:

    (a) click Start, type regedit in the search box

    (b) then go to this registry key

    (c) a HKEY_CURRENT_USER\Software\Microsoft\Windows Mail

    (d) and right-click on it and choose export to back it up.

    (e) then make sure that Windows Mail is closed and right click on the key again and choose Remove.

    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
    How to back up and restore the registry in Windows

  • error code (0x000000d) windows vista when I try to print, also cannot open windows updates or control panel

    error code (0x000000d) windows vista when I try to print, also cannot open windows updates or control panel

    Hi lisafuller,

    1 when was the last time it was working fine?

    2. did you of recent changes on the computer?

    3. What is the serial number and model of the printer?

    4. what happens when you try to access that Windows update and Control Panel?

    5. do you have security software installed on the computer?

     

    Method 1

    See the below Microsoft article and try the steps mentioned, check if it helps.

    Error message when you try to install a network printer on a Windows Vista-based computer: "Windows cannot connect to the printer operation cannot complete (error 0x0000000d).

    http://support.Microsoft.com/kb/947236

    Method 2

    If the previous step fails, then check out the link below and run them the troubleshooter, check if it helps.

    Printer in Windows problems

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    Due to Windows update run the Windows Update troubleshooting, check if it helps.

    Open the Windows Update troubleshooting tool

    http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

    Also check if you can access control panel from safe mode.

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    Restart the computer to return to normal mode

  • Cannot open all of the games on Windows Vista. A message from frror there is no file association

    All the games that are part of Windows Vista more show this message

    Hello

    Welcome to the community of Windows Vista answers.

    This happens if the IsShortcut registry value for .lnk (shortcut) file is deleted in an attempt to hide the overlay icon in the shortcut. To resolve this problem, re-create the IsShortcut registry value.

    Follow the steps mentioned below to resolve the error message you get.

    1. Click Start, type regedit.exe in the instant search box and press ENTER

    2. navigate to the following key:

    HKEY_CLASSES_ROOT\lnkfile

    3. in the right pane, create a string (REG_SZ) named IsShortcut value.

    4. close the registry editor and restart Windows.

    REGISTRY WARNING

    Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

    Try using the tool (SFC.exe) System File Checker to check and repair corrupt system files.  To do this, follow these steps:

    How to run scan SFC

    1. click on the Start button

    2. on the Start Menu, click all programs followed by accessories

    3. in the menu accessories, right-click on command line option

    4. in the drop-down menu that appears, click the "Run as Administrator" option

    5 If you have the enabled User Account Control (UAC) you will be asked to consent to the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

    6. in the command prompt window, type: sfc/scannow then press enter

    7. a message is displayed to indicate that "the analysis of the system will start.

    8. be patient because the analysis may take some time

    9. If all of the necessary files any replacement SFC will replace them. You may be asked to insert your Vista DVD for this process to continue

    10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

    11 after the scan finished, close the command prompt window reboot the computer and check.

    For more information, see the link below.

    http://support.Microsoft.com/kb/936212

    For more information, you can check the below link as well.

    When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program

    http://support.Microsoft.com/default.aspx/KB/950505

    Let us know if this helps

    Concerning
    Anthony.

Maybe you are looking for