cannot pair mobile mouse wireless Microsoft 6000 with a Toshiba bluetooth usb adapter

Similar Questions

• mobile mouse frozen microsoft 1000 wireless

  My microsoft 1000 wireless mobile mouse has stopped working suddenly. Can I use the buttons and the scroll wheel, but I won't spend. Sometimes and for some reason, it works for short periods of time. I tried with the new drivers, new batteries and other computers, and it does make a difference.

  I have "made them too. I'll try again with new batteries that I bought today.

• Questions KB and mouse wireless Microsoft with Win 7 64 bit

  Hello

  There could be other messages like mine, but I find it here, with exactly the same problem.

  I have a problem with my new Setup: Windows 7 64 bit and a Microsft Wireless Keyboard 6000 v3 and MS Wireless Mouse 6000 v2 (he came as a set).

  Now it works perfectly with my Windows XP system. I have now on a new computer, Win 7 64 bit. The mouse and the keyboard are now 'Skip', where they seem to ignore the entry for a second or two from time to time. As a first step, I let Windows 7 load its own drivers for these. After the mouse wheel input strange (no scroll bar on an active window would scroll to the bottom with no way to stop it) I downloaded the Intellipoint for the KB and mouse drivers and disabled the intellipoint Control Panel scroll wheel.

  I have changed the batteries, moved the receiver to different USB ports, but nothing helped. I have antivirus running. Wi - Fi KB and mouse works fine on this same machine, in the same USB ports.

  I would appreciate any input.

  Thank you

  Gamma

  Ray French

  Hi gamma,

  Thank you for your message.

  What is your make and model of computer?

  What are the sounds like interference might be the issue.

  Other wireless devices and certain appliances can interfere with wireless KB/mouse.

  Is there a wireless router near the receiver for the KB/mouse? This also will cause a microwave oven.

  Even if the mouse is located in front of a computer and the receiver is at the back of the computer.
  interference of the metal casing of the PC can connect properly.

  In order to better clarify, if you move the mouse backward through the office (left to right continuously for a minute) is the stop of pointer or freeze at any time?

  If so, I suggest to perform a clean boot to see if a startup program may conflict with the resources of mouse/KB:

  http://support.Microsoft.com/kb/929135

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Mobile Mouse 4000 stopped working with USB 2.0 port, works with 3.0 port.

  I just bought the Mobile Mouse 4000, eventually find the necessary drivers, installed, but still does not work, after plugging in all my USB ports so I decided to plug in on my single USB 3.0 port, it works. Nowhere on the site, or on the box does say USB 3.0 required, I went through my device manager and all the usb ports work correctly, even, I went in the power options and turned off the selective USB power option so that they are all on. How to work with normal 2.0 because I would like to save the port 3.0 for my WD external hard drive.

  Original title: is the Mobile Mouse 4000 only USB 3.0?

  Hello

  1. What is the brand and model of your computer?

  2. are you able to work with other USB 2.0 devices normal port?

  3. what happens when you try to plug the USB key?

  4. What is the operating system installed on the computer?

  I suggest you to connect the mouse to another computer and check with the question.

  Method 1: Run the Fixit described in the article:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  As all devices have same also have USB device associated drivers. Appropriate sometimes drivers not detected after initial installation so reinstalling the drivers can fix the problems.

  You can check after uninstalling and reinstalling USB drivers if you are able to connect. You can disconnect all USB devices and then perform the following steps:

  1. click on Startand then click Control Panel.

  2. click on system and Maintenance, click System, and then click Device Manager.

  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  3 in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  4. Repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

  If you are still having the same problem then you can check the device USB drivers updated using windows update.

  Reference:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps.

• Cannot get my mouse wireless instaled.

  Microsoft wireless mouse, want to install on the laptop with vista. I know I am missing just something simple. Thank you for your help.

  http://www.ehow.com/how_2032397_install-wireless-mouse.html

  "How to install a wireless mice for laptop use with your PC.

  1. Step 1

     Insert new batteries into the battery of your wireless mouse.

  2. Step 2

     Position the wireless receiver least eight inches away from your laptop and between eight inches and six feet away from the mouse.

  3. Step 3

     Insert the CD for the driver for your mouse wireless in your CD drive.

  4. Step 4

     Follow the on-screen instructions to install the driver for the mouse.

  5. Step 5

     Connect the receiver to the USB port on your laptop wireless.

  6. Step 6

     Test your new mouse by moving on your screen by clicking some icons.

     See you soon.

  Mick Murphy - Microsoft partner

• HP Compaq dc5750 + mouse wireless / wired = sucks with Minecraft

  Original title: microsoft wireless mouse ruins gameplay of Minecraft Classic

  With a keyboard and wireless Microsoft mouse, the mouse is the problem playing Minecraft Classic and when I click the button left or right he wants to just go into the menu. I tried to use parameters, it does not work. I don't know if Mojang had a bug in their system or my mouse is one that is looted. That was a month and a half (maybe).

  Hey young Parker,

  Follow the steps in the link.

  http://support.Microsoft.com/kb/318378

• mobile mouse wireless MS 4000

  Wireless MS Mobilec mouse 4000.  What is the purpose of the silver button on theleft side?

  Hello

  Please watch the following video:

  http://www.YouTube.com/watch?v=lc8tJtRcOF0

  and the last item on the following link:

  http://www.Microsoft.com/hardware/en-AU/p/wireless-mobile-mouse-4000#product-tour-lightbox

  Kind regards.

• Cannot use mobile mouse 3500 "unrecognized usb device".

  Original title: mobile mouse 3500

  Mobile mouse 3500 has malfunctioned. "unrecognized usb device". This has happened once before. It seemed to correct itself when my computer is doing a weekly update. I did an update manually, but the error has not corrected itself. This mouse is only a few months old.

  Hello

  What operating system do you use?

  Step 1: Try to run the fix it tool to the article below and check.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  Step 2: Update the driver for this device using the audit and the Device Manager.
  Reference: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly

  Step 3: Uninstall and reinstall the driver and the software for this device.
  Reference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program
  http://www.Microsoft.com/hardware/en-us/downloads

  I hope this helps.

• Can't get mouse Bluetooth works with the Toshiba Bluetooth software

  I have problem with my MS Mouse. I bought * Wireless Notebook Presenter Mouse 8000 * [http://www.microsoft.com/hardware/mouseandkeyboard/productdetails.aspx?pid=085] the problem is that the Toshiba Bluetooth cannot find all the buttons, so I can't use them.

  It is possible to add the HID profile (for the mouse) or send it to me.

  You have any software with this mouse? Have you installed?

• Problem with the Toshiba bluetooth stack

  Hello, I'm having a problem with toshiba bluetooth stack. I had windows vista installed in my laptop. I decided to upgrade to Windows 7. I got a bluetooth mouse attached to my toshiba bluetooth stack in windows vista. After the upgrade to windows 7 my bluetooth mouse is not working any more and it is not listed in the list of devices. But, when I turn on my mouse, the system battery bluetooth bar turns green as when the device is connected, but it does not work and the device is still not listed. I'm trying to redetect, but it is not detected. I tried to uninstall and reinstall the bluetooth stack, but in the reinstalling my devices are always listed.

  Can someone help me or tell me how to manually remove all connected devices? Thanks in advance.

  You have selected the option to remove all device configurations?
  If not, then please try it and then reinstall the Bluetooth stack.
  You can also do this via command line.
  Just run the following command as an administrator:
  MsiExec.exe /x "{CEBB6BFB-D708-4F99-A633-BC2600E01EF6}" / qn DELETEALL = 1

  In addition, remove the batteries from the mouse for several seconds.

  Right click on the Bluetooth system tray icon > Options... > Security > view paired devices
  Remove your entry for the mouse device when it exists.

• "Should be a"customer safety reminder"mobile overheating wireless microsoft mouse 4000 USB transceiver.

  Just on the phone talking to a Gordon in your extra parts department. I explained my MS Wireless Mouse is or could be at risk of fire and could have burned my finger seriously when I removed my laptop USB Port USB transceiver. I see all kinds of technical information of MS (KB326241) about this problem of overheating and how to get the mouse or the replaced transmitter/receiver. However, Gordon watched being only a question of warranty and MS would replace the transceiver overheating device after that I sent it to MS for the analysis. I don't mind send it back to MS for the analysis, but I was told that I have to pay shipping and special delivery to replace the follow-up costs.

  If the Technical Support MS admits that they have this security problem customer, that this should be treated as a reminder before someone seriusly Burns houses, burn their house or destroys their computer. Before I return this transceiver to MS, I would like an answer in return. MS consider this issue a security issue or just another guarantee issue.   I intend to send this issue and the security on the US Federal Trade Commission, if I don't hear from Ms.   Please contact me on 303-422-XXXX. Also please email me at xxx* address email is removed from the privacy * and not my address MS Live. I'm in the MS system

  Sincerely.

  Richs

  You'll hear from Microsoft here.  This is a support forum of community volunteer staff where Windows users help other users of Windows.  You must use an official, supported 'Contact us' method if you expect a response from Microsoft.

• abandoned desktop optical wireless receiver wireless 3.1 w / mouse wireless optical 2000 "with or without keyboard' value

  . mouse is jerky, it need to be re-installed

  Hello

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  According to the description, I understand that the problem with wireless mouse jerky on the system game.

  Certainly, I understand your concern and will try my best to help you.

  There could be a possibility that this issue would have occurred because of damaged in the system wireless mouse drivers.

  I would suggest trying the following methods and check if that helps.

  Method 1:

  Open the hardware and devices troubleshooter.

  Note: If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

  If the problem persists, follow method 2

  Method 2:

  Please, check out the articles below and check if that helps.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/en-us/KB/838398

  If the problem persists, follow method 3

  Method 3:

  I suggest you to uninstall and reinstall the driver software wireless mouse and check if that helps.

  To do this, please refer to the steps below and check if that helps.

  1. Type devmgmt.msc in the search box start and press ENTER.

  2. In Device Manager, expand the mouse & keyboard listed in the list of devices.

  3. Right click on the driver.

  4. Click on uninstall.

  5. Restart the computer. The drivers will install automatically.

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• Cannot print from the site Microsoft Learning with my Kodak all-in-One printer

  Yes, I use an all in one Kodak printer that seems to work correctly.  However, while I am online on the Microsoft Learning site and try printing the glossary of words in the definitions, it seems that the learning site does not allow me to print the glossary.  The notes I take can be printed as well as other parts of training modules.  In addition, there is another issue that may or may not be related to the printing problem.  When the printer is turned on and I get ready to print a small icon in the lower right corner of the screen tells to disconnect me the USB device safely.  Also, I followed the instructions and disconnect the printer, but warnings continue to appear every time I have to restart the printer.  Thanks for any input into my problem.  Stephen

  * original title - problem with printing, maybe not printer friendly Version *.

  Hello

  · What happens when you try to print?

  · It affects all print jobs, or is the concern from Internet Explorer?

  · Were there any changes made on the computer before the show?

  If this is a recent problem, you can try to perform the system restore and restore the computer to the date it was working fine. For steps see: how to restore Windows XP to a previous state: http://support.microsoft.com/kb/306084

• LabVIEW: No communication with the RAD-2 USB adapter table.

  Hello

  I try to use a DL2 - N adapter USB to I2C/SPI/GPIO Dinah (https://diolan.com/dln2). This constructor provides drivers for the Council as an example Labview vis I want to just use them to access all interfaces through Labview. After that, I design a test configuration for our latest range of products using this adapter card.

  What I did:

  (1) new installation of Labview 2014 (version evaluaton). System: DELL Precision M6800 (i7), Windows 7 Professional SP1.

  (2) install the drivers OR VISA and NOR-488. 2 (14.0).

  (3) install the drivers from manufacturer as explained on the Web site of NOR.

  (4) run Labview.  I can see instrument pilot screws under the range of function and run the example screws so far, ok (I guess)

  (5) run NI MAX. No listed USB port. Only COM1 and LPT1 (printer port).

  (6) I ran a few windows test applications provided by the manufacturer to access all the NXP microcontroller interfaces in the DLN2. Everything works. I can read the analog/digital, power digital input values and use the SPI and I2C (I see the SPI/I2C frame Sin a scope).

  I spent a day through the various links in the Web site of NOR (have watcheing almost every video demo on the site) and are still not able to guess why Labview can not see my USB device.

  Any clue?

  Kind regards

  Jose

  Hello

  Problem solved. After contacting with Dinah (the manufacturer of the adapter card) they updated the driver library. Now the USB communication and all peripheral work of the microcontroller. I have a UART, SPI/I2C (master and slave), GPIO 48 and 8 inputs analog (10 bits to 1 MHz). All accessible via USB and for less than $ 200 USD (that's way less the HW OR equivalent).

  With Labview, it can be used without any problem. Not a Council weird at all, if you know something about the material.

  Bravo for Dinah!

  Jose

• plotter HP 650 c with a parallel to usb adapter

  I have an old HP 650 c plotter Designjet that I had to move from an old XP system to a little newer VIsta system. They were not all DB25 connectors on the new computer if I use an adapter from parallel to USB. The USB is not automatically recognize the plotter. Is not that familiar with USB I can't say if the plotter is there or not or simply appear as something else. I don't see any errors on the USB ports.

  Any ideas how to get USB to recognize the plotter?

  Thank you

  Hello

  To do any hardware with Windows, you must install the drivers from the manufacturer for this particular material.

  HP tips for the installation of the printer etc., is to install the software drivers first, and then connect the printer.

  But the Support drivers HP for your series machine seems to stop to XP:

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdHome?sp4ts.Oid=12651&AC.admitted=1402034171539.876444892.199480143

  Have you tried to install the XP drivers to see what happens?

  _______________________________

  You might be better to ask questions in the Forums of HP Support on this issue.

  http://h30434.www3.HP.com/PSG/

  See you soon.