Cannot perform a full backup of my drive hard using a 16 GB Flash drive

Similar Questions

• How can I perform a full backup on Windows XP?

  Hello everyone, I need to perform a full backup on Windows XP. I use Windows XP Professional SP3 x 86 as my current operating system. I wonder how do you and how many DVDs I need to use. I didn't need any estimated time. I have 1.99 GB of memory, a 3.20 gHz Intel Celeron Chipset CPU, and a player Samsung DVD-RAM made up of a desktop computer. If someone out there can answer, please let me know ASAP thank you if you answered.

  -Jordan "skypedog" talking

  Hi Jordan,.

  You can follow this link & check if it helps.

  How to use Backup to protect data and restore files and folders on your computer in Windows XP and Windows Vista

  Hope the helps of information.
  Please post back and we do know.

• When you perform a full backup in Windows 7, is also trying to save the destination drive

  Hello when I do a backup on my computer he wants to save the destination for my backup disk. I use the Windows 7 professional 64-bit operating system. I know that he cannot back up the drive on which the backup happens. How can I prevent that from happening.

  Hi FrancisEarley

  Yes, the backup can not be performed if the destination drive is selected in the backup list, if it is selected, then be sure to uncheck this drive and then proceed to the backup or if you want to include this backup disk, and then you must select a different destination location.

  For example, you can't back up the contents of drive E: to drive E:

  You can follow the steps of manual backup and verification-

  (a) open Backup and Restore.
  (b), select 'Configuration Backup' or 'back up now '.
  (c) and then in the list to save drivers deselect the destination drive, if it is present in the backup list and move forward with new steps to perform the backup.

  Refer to the below help links -.

  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files

  http://Windows.Microsoft.com/en-us/Windows7/how-does-Windows-choose-which-files-to-back-up

  http://Windows.Microsoft.com/en-us/Windows7/where-should-I-save-my-backup

  I hope this helps.

• cannot complete a full backup drive? Why!

  I TRIED DISABELING RETROVIRAL AND CLEAN BOOT AND STILL NO LUCK. IM RUNNING WINDOWS 7 EMACHINE HIS 90 DAYS ONLY OLD. THE MOST I WAS ABL TO BACKUP IS 35-45% AND THEN NOTHING NO SE GOING ON FOR HOURS. THIS CAN'T BE NORMAL... Help, please!
  Thank you...

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows backup for maintenance, will not perform a full backup.

  Original title: BACKUP WINDOWS FOR MAINTENANCE

  Why don't my backup to a blank disc or an external hard drive?

  Hello

  ·         What operating system do you use?

  ·         You get the error message?

  ·         Windows backup that you are using?

  ·         Are you able to perform a backup to internal hard drive?

  ·         Were there any changes made on the computer before the show?

  Follow these methods and check if that helps:

   

  Method 1:

  You can try to clean boot in order to check whether a third-party software is causing a problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7.
  http://support.Microsoft.com/kb/929135

  Note: Don't forget to reset the computer to start as usual, once the problem is resolved. Follow step 7 of the KB article.

  Method 2:

  You can try temporarily turning on all security software and then try the updates again.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3:

  I also suggest to follow the troubleshooting steps form the article and check if that helps.

   

  0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7

  http://support.Microsoft.com/kb/979281

• full backup on a network drive

  Having problems by performing a full backup using my network ethernet WD MybookLive drive. I have successfully done a backup of files, but if I try a complete backup network drive doesn't appear in the menu "on a hard drive' option drop-down list. How can I solve this problem?
  I am running Vista Business.
  Pakal

  Thanks for your quick reply, but he has NOT answered my question. A full backup (that will save an image of the hard drive, including the operating system and registry entries) is not an option in the WD backup software.
  I was able to accomplish my task using wbadmin.exe. Found a thread very useful here:

  http://maximumpcguides.com/Windows-Vista/schedule-a-complete-PC-Backup/

  It is easier than that, it is basically a two-step process:
  (1) go to start-accessories and right click on "command prompt" by selecting "run as administrator
  "
  (2) type the following command (changing only the path to your shared drive): WBADMIN START BACKUP - backupTarget: f:-include: c: - allCritical - vssFull-quiet

  Wait a few hours and you're done. You can see the progress of the backup in terms of percentage.

  P_

• On Windows Vista 32 bit full backup fails with error 0x8007045d i/o device.

  Original title: 32 bit back up fails i/o device error

  I'm doing a full backup, because I just perchased Office 2010. I am trying to download on my cd player, E: got as far the 3rd cd and it fails

  i/o device error (0x8007045d)

  Help with this error code?

  Hello
   
   
  Try the methods listed in the section below and check if that helps resolve the issue.
   
  Error message when you try to perform a full backup on a Windows Vista-based computer: "the application cannot be performed because of an i/o device error."
  http://support.Microsoft.com/kb/952272
   
  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Archive newspaper vs. Full Backup Concept

  Hello
  
  I just need some clarification on how backups and Archives Records work. Lets say from 13:00 I have archive records 1,2,3,4,5 and then I perform a full backup at 18:00.
  
  I take then generate logs archiving at 18:00 to get newspapers 6,7,8,9,10. Then, I stop at 23:00.
  
  If my interpretation is correct, the archive logs should allow me to restore oracle to a point in time anywhere between 13:00 and 23:00. But if I have only the full backup, then I can only restore to a single point, which is from 18:00. My understanding is correct?
  
  Archive logs only applied to data files during backup or only during a restore? There is no archive newspaper applied on the fly.
  
  Thanks in advance.

  thelok wrote:
  Thanks for the great explanation! If I can do a restore time to any time point since the data changed files have been written (or when I have the last set of data files backed up more archive logs). What you say, I can force the data files to write about recovery logs (by a control point with 'alter set archive current log' or 'backup database more archivelog'), and then I can delete all archive logs have an SCN less than the SNA control point on the data files. Is this true? It would be for the purpose of preservation of disk space.

  Hello

  See this example. I hope this explains your doubt.

  # My current date is 06-11-2011 17:15
  # I not have backup of this database
  # My retention policy is to have 1 backup 
  
  # I start listing  archive logs.
  RMAN> list archivelog all;
  
  using target database control file instead of recovery catalog
  
  List of Archived Log Copies
  Key     Thrd Seq     S Low Time            Name
  ------- ---- ------- - ------------------- ----
  29      1    8       A 29-10-2011 12:01:58 +HR/dbhr/archivelog/2011_10_31/thread_1_seq_8.399.766018837
  30      1    9       A 31-10-2011 23:00:30 +HR/dbhr/archivelog/2011_11_03/thread_1_seq_9.409.766278025
  31      1    10      A 03-11-2011 23:00:23 +HR/dbhr/archivelog/2011_11_04/thread_1_seq_10.391.766366105
  32      1    11      A 04-11-2011 23:28:23 +HR/dbhr/archivelog/2011_11_06/thread_1_seq_11.411.766516065
  33      1    12      A 05-11-2011 23:28:49 +HR/dbhr/archivelog/2011_11_06/thread_1_seq_12.413.766516349
  
  ## See I have archive logs from time "29-10-2011 12:01:58" until "05-11-2011 23:28:49" but I dont have any backup of database.
  
  # So I perfom backup of database including archive logs.
  
  RMAN> backup database plus archivelog delete input;
  
  Starting backup at 06-11-2011 17:15:21
  
  ## Note above RMAN forcing archive current log, this archivelog generated will be usable only for previous backup.
  ## Is not my case... I don't have backup of database.
  
  current log archived
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: sid=159 devtype=DISK
  channel ORA_DISK_1: starting archive log backupset
  channel ORA_DISK_1: specifying archive log(s) in backup set
  input archive log thread=1 sequence=8 recid=29 stamp=766018840
  input archive log thread=1 sequence=9 recid=30 stamp=766278027
  input archive log thread=1 sequence=10 recid=31 stamp=766366111
  input archive log thread=1 sequence=11 recid=32 stamp=766516067
  input archive log thread=1 sequence=12 recid=33 stamp=766516350
  input archive log thread=1 sequence=13 recid=34 stamp=766516521
  channel ORA_DISK_1: starting piece 1 at 06-11-2011 17:15:23
  channel ORA_DISK_1: finished piece 1 at 06-11-2011 17:15:38
  piece handle=+FRA/dbhr/backupset/2011_11_06/annnf0_tag20111106t171521_0.268.766516525 tag=TAG20111106T171521 comment=NONE
  channel ORA_DISK_1: backup set complete, elapsed time: 00:00:16
  channel ORA_DISK_1: deleting archive log(s)
  archive log filename=+HR/dbhr/archivelog/2011_10_31/thread_1_seq_8.399.766018837 recid=29 stamp=766018840
  archive log filename=+HR/dbhr/archivelog/2011_11_03/thread_1_seq_9.409.766278025 recid=30 stamp=766278027
  archive log filename=+HR/dbhr/archivelog/2011_11_04/thread_1_seq_10.391.766366105 recid=31 stamp=766366111
  archive log filename=+HR/dbhr/archivelog/2011_11_06/thread_1_seq_11.411.766516065 recid=32 stamp=766516067
  archive log filename=+HR/dbhr/archivelog/2011_11_06/thread_1_seq_12.413.766516349 recid=33 stamp=766516350
  archive log filename=+HR/dbhr/archivelog/2011_11_06/thread_1_seq_13.414.766516521 recid=34 stamp=766516521
  Finished backup at 06-11-2011 17:15:38
  
  ## RMAN finish backup of Archivelog and Start Backup of Database
  ## My backup start at "06-11-2011 17:15:38"
  
  Starting backup at 06-11-2011 17:15:38
  using channel ORA_DISK_1
  channel ORA_DISK_1: starting full datafile backupset
  channel ORA_DISK_1: specifying datafile(s) in backupset
  input datafile fno=00001 name=+HR/dbhr/datafile/system.386.765556627
  input datafile fno=00003 name=+HR/dbhr/datafile/sysaux.396.765556627
  input datafile fno=00002 name=+HR/dbhr/datafile/undotbs1.393.765556627
  input datafile fno=00004 name=+HR/dbhr/datafile/users.397.765557979
  input datafile fno=00005 name=+BFILES/dbhr/datafile/bfiles.257.765542997
  channel ORA_DISK_1: starting piece 1 at 06-11-2011 17:15:39
  channel ORA_DISK_1: finished piece 1 at 06-11-2011 17:16:03
  piece handle=+FRA/dbhr/backupset/2011_11_06/nnndf0_tag20111106t171539_0.269.766516539 tag=TAG20111106T171539 comment=NONE
  channel ORA_DISK_1: backup set complete, elapsed time: 00:00:24
  Finished backup at 06-11-2011 17:16:03
  
  ## And finish at "06-11-2011 17:16:03", so I can recovery my database from this time.
  ## I will need archivelogs (transactions) which was generated during backup of database.
  ## Note during backup some blocks are copied others not. The SCN is inconsistent state.
  ## To make it consistent I need apply archivelog which have all transactions recorded.
  
  ## Starting another backup of archived log generated during backup.
  Starting backup at 06-11-2011 17:16:04 
  
  ## So automatically RMAN force another "checkpoint" after backup finished,
  ## forcing archive current log, because this archivelog have all transactions to bring database in a consistent state.
  
  current log archived
  using channel ORA_DISK_1
  channel ORA_DISK_1: starting archive log backupset
  channel ORA_DISK_1: specifying archive log(s) in backup set
  input archive log thread=1 sequence=14 recid=35 stamp=766516564
  channel ORA_DISK_1: starting piece 1 at 06-11-2011 17:16:05
  channel ORA_DISK_1: finished piece 1 at 06-11-2011 17:16:06
  piece handle=+FRA/dbhr/backupset/2011_11_06/annnf0_tag20111106t171604_0.272.766516565 tag=TAG20111106T171604 comment=NONE
  channel ORA_DISK_1: backup set complete, elapsed time: 00:00:02
  channel ORA_DISK_1: deleting archive log(s)
  archive log filename=+HR/dbhr/archivelog/2011_11_06/thread_1_seq_14.414.766516565 recid=35 stamp=766516564
  Finished backup at 06-11-2011 17:16:06
  
  ## Note: I can recover my database from time "06-11-2011 17:16:03" (finished backup full)
  ##  until "06-11-2011 17:16:04" (last archivelog generated) that is my recover window in this scenary.
  
  ## Listing Backup I have:
  ## Archive Logs in backupset before backup full start - *BP Key: 40*
  ## Backup Full database in backupset - *BP Key: 41*
  ##  Archive Logs in backupset after backup full stop - *BP Key: 42*
  
  RMAN> list backup;
  
  List of Backup Sets
  ===================
  
  BS Key  Size       Device Type Elapsed Time Completion Time
  ------- ---------- ----------- ------------ -------------------
  40      196.73M    DISK        00:00:15     06-11-2011 17:15:37
          *BP Key: 40*   Status: AVAILABLE  Compressed: NO  Tag: TAG20111106T171521
          Piece Name: +FRA/dbhr/backupset/2011_11_06/annnf0_tag20111106t171521_0.268.766516525
  
    List of Archived Logs in backup set 40
    Thrd Seq     Low SCN    Low Time            Next SCN   Next Time
    ---- ------- ---------- ------------------- ---------- ---------
    1    8       766216     29-10-2011 12:01:58 855033     31-10-2011 23:00:30
    1    9       855033     31-10-2011 23:00:30 896458     03-11-2011 23:00:23
    1    10      896458     03-11-2011 23:00:23 937172     04-11-2011 23:28:23
    1    11      937172     04-11-2011 23:28:23 976938     05-11-2011 23:28:49
    1    12      976938     05-11-2011 23:28:49 1023057    06-11-2011 17:12:28
    1    13      1023057    06-11-2011 17:12:28 1023411    06-11-2011 17:15:21
  
  BS Key  Type LV Size       Device Type Elapsed Time Completion Time
  ------- ---- -- ---------- ----------- ------------ -------------------
  41      Full    565.66M    DISK        00:00:18     06-11-2011 17:15:57
          *BP Key: 41*   Status: AVAILABLE  Compressed: NO  Tag: TAG20111106T171539
          Piece Name: +FRA/dbhr/backupset/2011_11_06/nnndf0_tag20111106t171539_0.269.766516539
    List of Datafiles in backup set 41
    File LV Type Ckp SCN    Ckp Time            Name
    ---- -- ---- ---------- ------------------- ----
    1       Full 1023422    06-11-2011 17:15:39 +HR/dbhr/datafile/system.386.765556627
    2       Full 1023422    06-11-2011 17:15:39 +HR/dbhr/datafile/undotbs1.393.765556627
    3       Full 1023422    06-11-2011 17:15:39 +HR/dbhr/datafile/sysaux.396.765556627
    4       Full 1023422    06-11-2011 17:15:39 +HR/dbhr/datafile/users.397.765557979
    5       Full 1023422    06-11-2011 17:15:39 +BFILES/dbhr/datafile/bfiles.257.765542997
  
  BS Key  Size       Device Type Elapsed Time Completion Time
  ------- ---------- ----------- ------------ -------------------
  42      3.00K      DISK        00:00:02     06-11-2011 17:16:06
          *BP Key: 42*   Status: AVAILABLE  Compressed: NO  Tag: TAG20111106T171604
          Piece Name: +FRA/dbhr/backupset/2011_11_06/annnf0_tag20111106t171604_0.272.766516565
  
    List of Archived Logs in backup set 42
    Thrd Seq     Low SCN    Low Time            Next SCN   Next Time
    ---- ------- ---------- ------------------- ---------- ---------
    1    14      1023411    06-11-2011 17:15:21 1023433    06-11-2011 17:16:04
  
  ## Here make sense what I trying explain
  ## As I don't have backup of database before of my Last backup, all archivelogs generated before of my backup full is useless.
  
  ## Deleting what are obsolete in my env, RMAN choose backupset 40 (i.e all archived logs generated before my backup full)
  
  RMAN> delete obsolete;
  
  RMAN retention policy will be applied to the command
  RMAN retention policy is set to redundancy 1
  using channel ORA_DISK_1
  Deleting the following obsolete backups and copies:
  Type                 Key    Completion Time    Filename/Handle
  -------------------- ------ ------------------ --------------------
  *Backup Set           40*     06-11-2011 17:15:37
    Backup Piece       40     06-11-2011 17:15:37 +FRA/dbhr/backupset/2011_11_06/annnf0_tag20111106t171521_0.268.766516525
  
  Do you really want to delete the above objects (enter YES or NO)? yes
  deleted backup piece
  backup piece handle=+FRA/dbhr/backupset/2011_11_06/annnf0_tag20111106t171521_0.268.766516525 recid=40 stamp=766516523
  Deleted 1 objects
  

  In the example above, I could before running Backup "archivelog all delete" because they are not necessary, but as an example, I followed this unnecessarily. (archivelog backup and deletion after)

  Kind regards
  Levi Pereira

  Published by: Levi Pereira on November 7, 2011 01:02

• Can not do a full backup

  I have 10 items on Windows 7.  When I try to do a full backup on an external hard drive, I see ' calculating size total media "and execution bar stops at 96% and nothing else happens.  I waited for an hour, nothing.  My CPU usage meter shows no activity.  It is as if he is suspended.  I can't cancel, I have to click the x button.  At some point in the past that works because I had three all backup files on my external hard drive (which I deleted before you do).

  What's wrong?

  OK people.  I think I got it fixed!

  I went with the support of Adobe paid ($39) and after a few days (almost a week), it seems to be fixed.  At least, I can now make a backup.  I have not tried to restore from it again (or I will cause that creates a whole new level of complexity.)  Suffice it to say the part of my backup procedure is now doing a copy of catalog file and my photos on an external drive.

  After several calls to whom we did much basically the same things that you, dear friends suggested I do, Adobe said they would get back to me within 48 hours while they esclated it.  It was last Wednesday.  On Tuesday (6 days later, but over the weekend), they were recalled to work.  We all seemed to agree that the catalog is corrupt.  They wanted me to download the catalog offending on their ftp server, we did.  Either way, the level of expertise on the line this time was considerably higher than last week.

  Apparently, as they climbed over the issue, some backroom engineer asked to have my catalog sent to them so they could watch.

  The next day, I get a call and download us the catalog sets down to my PC and I have successfully completed a top backup.  It looked like it had been fixed very quickly yesterday.

  So there is an answer.  I suggested it, they try to put the fix in their catalogue of repair service, but...

  Meanwhile, I discovered that many of my pictures already had the tags written for them.  Many do not have.  Since I've never used tags writing to photo option keyword, I was wondering when and how the tags wrote.  I asked Adobe and they said that if you have photos to analyize it can also write the tags.  And you were correct, that the tags on the files are the last 'editorial '.  Any changes to the tags that make you in the organizer do not appear in the files to what rewrite you for them.

  Hope this helps other people.

  And THANKS a lot for all the help and expertise you gave me.

  See you soon,.

  Eric

• Apply the bow logs after the full backup

  DB version: 10 gr 2
  
  
  NOCATALOG mode, I'll take a full backup (hot) DBx (800 GB) using the command

  run {
  allocate channel c1 TYPE DISK connect 'sys/dempo'  FORMAT   '/u04/bkp/stprod_%U.rbk';
  backup as compressed backupset database tag 'full'  plus archivelog; 
  }

  and restore it in DBy.
  But how do I apply archive logs generated dbx during the full backup after the full backup?
  The restored control file does not have these archived logs. Right?

  But the control file which will be restored isn't aware of these new logs archived 5

  Take an another controlfile after the log backups backup archive 5.

  However, you can also CATALOG (search for documentation of RMAN for the "CATALOG" as a command RMAN) backup archivelog items 'Add' in the backup controlfile preceded.

  Hemant K Collette

• How to perform a manual backup full with airport Time Capsule

  I want to switch to OS X Yosemite.  Before I do that, I want to perform a full manual backup of my system at the airport Time Capsule.  I was not able to find instructions on how to perform a manual backup by using the existing time Capsule.  Thank you.

  Dick C.

  Go to the Time Machine icon in the menu bar and click on NTI Backup Now

• I am unable to back up windows Vista on an external drive that I am cant get full backup - error 0 x 80070005

  original title: error message

  I am unable to back up windows Vista on an external drive that I am cant get full backup - error 0 x 80070005. How to overcome this please? Thanks for your help. Kay Alexander

  Hello

  see if this information helps you

  How to make a backup of your data (all Vista versions)

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc (Vista, full and professional company)

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  If you have problems with the repost of process above in forum microsoft link that is specific to the backup below questions

  "This forum supports questions for the default backup utility in Windows Vista, Server 2008 and beyond."

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• How do I partition my drive so I can create a full backup of my computer?

  My hard drive with windows 7 appears in disk management with 3 partitions. One is the system partition labeled C: healthy (System, boot, pagefile, Active, Crash Dump, primary Partition) and the other 2 say-healthy (recovery Partition) 1.46 GB and healthy (Primary Partition) 6.36 GB. The other 2 are shown as 100% free. Can I remove these or at least the other primary partition so I can use the space? I want to create a partition where I can make a full backup of my computer so I can restore to the current state.  Any help on how to do this? I'm not at all familiar with the help of disk management. I guess I can delete the system partition, and then the 6.36 GB will be automatically added to the first primary partition, or it would show as unallocated, then I have to shrink the first primary partition and merge sort the free space of the 2 partitions to create 1 partition backup. But I have never done this so I don't know exactly what to do.

  I also have an external hard drive 2 TB USB with 1 primary partition. I would like to back up on that as well (I guess I should also create a separate partition for this.). Ideally, I would like to have my computer Setup, so when it starts up I have the ability to restore. And I guess just that this would require backup on a separate partition.

  I have two Windows 7 with the backup and restoration of facilities as well as Acronis True Image Home 2011.

  Any advice much appreciated

  Thanks, Mike

  Save your files or your partitions in a free partition on the internal drive is a waste of time. Doing so offers no protection against the most common such as woes

  • Flight
  • Water damage or fire
  • Physical damage (dropping out of the machine)
  • Hard drive crash
  • File system corruption (e.g. damaged partition table)
  • User error (for example of formatted the wrong partition)

  A decent backup plan is based on the backup media being kept well away from the PC for most of the time.

  Note also that expand them or shrink partitions is equivalent to open heart surgery. Make sure you have your important stuff saved beforehand. You should also check if the saved controls is actually readable.

• Cannot download HP Officejet Full Feature Software and Driver Pro

  Cannot download update HP Officejet Pro Full Feature software and driver.  HP Officejet Pro 8500 has more

  Is there another way to get the software of subject? (other than on CD)

  Hello

  If you are having problems with the download or the other start or end, try the link below to see if it is not more successful.

  http://ftp.HP.com/pub/softlib/software12/COL32938/MP-81839-3/OJ8500_A910_231.exe

  Kind regards

  DP - K

• When vDR to perform full backups?

  I'll set up an installation of vDR test as a proof of concept, and contrary to read the documentation, it appeared on me... when vDR do full backups?  I know that the first virtual computer backup is a complete and incremental after that.  But when the following is executed?  I did some Google'ing and looking through the documentation, but have not yet found an answer.

  Currently I ave the configuration of the backup task to keep 6 daily backups every 4 weeks and 1 month.  When the first full backup has expired, another take?  Also, is it possible to force a full backup on one computer virtual other than to create a new backup job?

  void269 wrote:

  .. .in makes vDR do full backups?  I know that the first virtual computer backup is a complete and incremental after that.  But when the following is executed?

  My understanding is that VDR still to complete and never traditional backups "extra." However, given that the backup data store uses a deduplication technology each "Full" backup will only grow with the blocks changed since the last backup.