Cannot print after upgrading to Windows 10

Similar Questions

• Printer HP C310a Printsmart: c310a printer cannot print after upgrading to Windows 10

  After you install the free upgrade to Windows, the printer is impossible or impression.

  I managed to re - install my printer driver via the «PRINT INSTALLATION WIZARD»

  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PIW

• OfficeJet 6500 E709n: Cannot print after upgrading Windows 10

  Cannot print. "Doctor print" said there is a software problem.

  Uninstalled the drivers and reinstalled the software complete... twice.

  Capable of printing in color "internal" wireless test page but cannot print a doc and it does not show in the Panel "see what's printing.

  Uninstalled all printers if none showed, in the Panel. When the software has been reinstalled, it showed two Officejet 6500 s on the control panel.

  I tried the post install 'Print sample' with each check printer default and no work.

  Seems that the problem started when I "upgraded" to the new Windows 10.

  Kili2 wrote:
  

  Cannot print. "Doctor print" said there is a software problem.

  Uninstalled the drivers and reinstalled the software complete... twice.

  Hi Kili2,
  
  Try to install your printer via "Open network" - via the window icon or desktop to explore - and choose 'Add devices and printers' (you may need to click the arrow next to the question mark for the top menu show).
  Let the wizard to search for awhile, selcect your printing device, and click 'next'.

  

  After you follow these steps, search for the new installed printer (the name is shown in network for printer and scanner) in "Printers and devices" in the control panel.
  Use this printer as the default printer and you should be able to print over the network cable or wireless.

• DeskJet 1050 - J410a: HP Deskjet 1050 does not print after upgrade of Windows 10

  Dear forum,

  I recently upgraded my HP Windows OS 8.1 for Windows 10 desktop computer. My deskjet 1050 printer, which worked fine before the upgrade, does not properly more print after the upgrade.

  I used HP Print and Scan Doctor several times, indicating no any problems. I am able to scan documents, the question is limited to printing. I also deleted and reinstalled the drivers at least 2 times (and restarted all systems on a regular basis).

  • A "test print" works very well.
  • When I print a PDF from the edge, the printer creates output but not good quality.
  • When I print an office word document, pages came out empty.

  3 cases have a common behavior, whenever I get an error message. "Morning maken puts printer niet mogelijk. Duch is for "cannot connect to the printer.".

  Do you have any tips for me?

  With sincere friendships.

  Pieter

  HeyPieter_Belgium

  Welcome to the HP Forums, I'd love to help you with printing problems you encounter. Although I am not sure what is cause of the error of communication, or of poor quality, I suspect it has something to with the pilot and the recent upgrade. I suggest to uninstall the software, remove the Chuck from the properties of the server, and then put it back using the printer Installation Wizard. I will list the links and instructions below to help you in each of these steps.

  HP printers - uninstalling the software of the printer (Windows)

  Remove the driver from the print server properties:

  1. in the folder "devices and printers".

  2. choose "print server properties.

  • Win XP - with no printer selected, click 'File' then 'server properties '.
  • Windows Vista - with no printer selected, press 'Alt' and then click 'file' then 'server properties '.
  • Windows 7/8, 8.1 and 10 -select any printer in the "Devices and printers" folder and click on "Print server properties" above.

  3. click on the "Drivers" tab at the top of the window "properties of the print server.

  4. choose the printer that you want to uninstall, and then click 'remove '.

  5. choose "Remove driver only.

  6. the next screen will give a warning, letting you know that the removal of the driver package will remove it from the system. Click 'Yes' to say are you sure you want to do.

  If documents are stuck in the spooler to print, you see an error, cancel all documents waiting in the print queue or try restart the spooler to print, and then try to delete the driver from 'Print server properties' again. If she will not always remove the sachet, restart the computer and the printer should correct this error "in use" and allow the driver to be removed.

  • If him you continue to get an "in use" message followed the steps in the document here. The specified printer driver is currently in use

  Download and run the Installation Wizard for printer: www.HP.com/go/Tools 

  If this solves the problem, please indicate your post as solved by clicking on the accept button Solution below. If you need help, let me know!

  Thank you.

• DesignJet 111: DesignJet 111 - printing problems - no printing after upgrading to Windows 10

  Several problems to the upgrade of WINDOWS 7 for WIN 10.

  The HP DesignJet is 'offline' and can't figure out how to change the setting of "online."

  The definition "print directly to the printer" is not.

  Yellow flashing on the printer dashboard - magenta ink cartridge shows empty, but it is full.

  Computer HP printer installed - poster is in the Device Manager - watch "this device is functioning."

  Printer is listed in devices and printers.

  HP Support Assistant doesn't recognize - printer in the list, can not find device during an attempt of "add design.

  Printer turns off or recycle off on after turning on.

  Hello

  If you have a driver problem:

  Remove the driver completely from the computer, then download and install the lates driver.

  Here is the link incase you need

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=4123145 & swLangOid = 8 & swEnvOid = 4192

  Now, the yellow light flashes on the Panel means that the printer needs attention, like:

  -Close coverage which is open

  -Of paper

  -Paper tilt

  -Jam

  -An error code

  If you have 6 columns on the levels of ink instead of 4 is because you have an error code.

  On the following link, you can find more information on how to prepare the error codes

  http://h20565.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=352387 & docid = emr_na-bpp03841

  If you have an error code, the printer appears offline on your computer.

  On this other link, you will find how to check other messages on the printer

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c01669949

• HP940c does not web print after upgrading to Windows 7

  recently unclassified HP Pavilion 9500 from Vista Home Premium to Windows 7 Home Premium. After upgrade, can no longer print to Web sites - using IE 11.0. Before the upgrade was using IE 9.0. Tried to print from multiple sites by using the function "Print" in the "Tools" button Was able to copy information Word doc Web site and print it from there. All ideasas to problem?

  Hi twf42,

  Thank you for being an active member of the HP support forums.  I understand that you have an impression of Internet Explorer 11 problem on your Windows 7 computer.

  I have included a link in Microsoft Internet Explorer required 11.  Microsoft says IE 11 runs only on computers running Windows 8.1 or Windows RT 8.1.

  Microsoft Internet Explore 11 system requirements

• OfficeJet 5745: Cannot print after update of Windows 10

  I've updated to Windows 10 and now have problems printing.  Help!  I've done all the troubleshooting, coil status stuff!  I'm used to be able to print from the internet, scanning to my computer or email and print wireless from my phone.  I now can not print anything!  I tried to install Windows updates.  Should what printer I configure default network or regular?  Use the printer pdf microsoft thing?  I am desperate... saved my bank statement online (pdf) to my documents and it would not print the Bank or my documents!  Before this I had problems after that my hard drive crashed and I got a new hard drive.   When my hard drive crashed I was using WINDOWS 10 and everything on the big printer worked; they sent back with new hard drive on windows 8.1 and I had I thought that the upgradew would solve the questions.   I could print and scan but no wireless for my phone on the new HDD in windows 8.1 and upgrade to 10 thought would solve my problems, but now it's worse... Help!

  Hi @savra,

  If your computer is connected to the printer on a wireless network, you do not want to send print jobs to the network printer.

  Here is a support document to help with printer after Windows 10 upgrade problems - after Windows 10 Upgrade, printer problems occur.

  Aside to make sure Windows updates are up to date, there are a few other updates that can help with printing.

  Microsoft has released an update that is supposed to help with wireless printing - Cumulative Update for Windows 10.

  There was also an update for Adobe Flash Player in Internet Explorer and Microsoft Edge who can help get this impression of your bank's site - Update for Adobe Flash Player.

  Please let me know how it goes.

  If this helps you find a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• HP Officejet Pro 8500 a A910a: problem formatting of printer after upgrade to Windows 10

  After the upgrade to Windows 7 to 10, some printed documents very well while others print in close columsns of 15 letters causing a document 1 page run 6 to 8 pages long and useless.

  I downloaded the latest driver from HP and used their diagnostic tests.  I used Windows Diagnostics.  They suggest no action.  I contacted Microsoft 3 times and technicians turned out to be unnecessary; It was suggested that finally back to Windows 7.  The printer works just great.  This printer is no longer under warranty.  I have a same printer which works well on another computer running Windows 10.

  I would like to know how to solve this problem caused by the upgrade to Windows 10.

  Wing wrote:

  I use Outlook.  Previews all looked normal.  I had problens with printing of emails but have been able to print a PDF document.

  Hi Wingtip,

  Please follow these steps to try to resolve the problem:

  1. open outlook

  2. double-click on the email address that you want to print (the email must open in a separate window)

  3. click on file and then print

  4. in the print window, select your printer and click Print below options.

  5. in the window options printing, make sure that the print style is set to memo, and then click Page layout

  6. click the paper tab, and set the margins to 0.50 '' on all sides. Also make sure the paper type and size is set to letter.

  7. click OK and then try to print.

  Please let me know if this helped.

• HP Officejet Pro 8620: Cannot parse after upgrade to Windows 10

  After switching to Windows 10, I found that I could not scan to my computer using a USB connection.  I ran HP print and Scan doctor and he said that everything was OK and I could actually scan a document into my computer using the "scan test" function of the program.  However, the normal scan would not work with the error msg 'connection to computer is lost.  So I uninstalled the current HP printer driver software and downloaded the recommended replacement.  The scan does not always for the same reason.  Still printing HP and Scan doctor said that everything is perfect with the scanner but now when I try to do a 'test' scan I get the message "HP Officejet Pro 8620 is not found".

  This same package worked for many other clients, so I don't feel the driver/software it is, on the contrary, I suspect that the question has something to do with the computer.  I'm always happy to do everything that I can to help if you want.

  I suggest running the tool (SFC.exe) System File Checker. If you do not know how, you can use the following link for instructions: System File Checker: run sfc/scannow & analyze its logs in Windows 10 / 8 / 7.

  Another thing we can do to help isolate the problem is to perform a WebScan.

  I made some screenshots for you that might help, I know that sometimes it is easier when you have a Visual. You will need to get the printers IP address from the front panel of the printer. You can touch the wireless network icon and view in the menu wireless settings. Take the IP address and enter the address of a browser bar.

  In the embedded Web server, click settings

  

  On the left side, click the administrator settings

  

  You will see the following message will appear, click OK

  

  You can now select continue on this site

  

  It may take a few minutes for the next page load. You might even see get a message that says: "Internal system error", if this happens please just refresh the page. (you can tap F5 on the keyboard to refresh)

  

  Once the WebScan is enabled you can click the WebScan tab above and do a scan. Please let me know if it works or not.

• HP envy 4500: hp envy 4500 cannot print after upgrading Windows 10

  Does not work with windows 10. When the updated drivers will be available?

  I have downloaded and run EN4500_198.exe. Add a new printer via direct wireless.  I received the message that my printer has been installed. When I try to access the printer through the network, the printer is not found. When I do for the devices and printers, I see my printer with the following message: HPF734F1 (HP ENVY 4500 series) driver is not available.

  I can scan to my computer, just not printing. I'm lost.

  OK just figuredb out. had to remove the old printer definition Bundeskunsthalle windows 8.1. Once I did that, win dows 10 find the printer on the network and use it correctly.

  Thanks for all the help.

• Cannot print after upgrading to Sierra

  After the upgrade to Mac OS Sierra yesterday, I was unable to print on my Canon Pixma MX892. The Canon site says there is no update driver for this OS. When I try to print, I get an error "Failed to filter" and my printer spits out a blank sheet.

  Finally, I am informed that cgpdftoraster crashed.

  Taken from the Canon Website:

  "Canon is working with Apple to solve some problems of compatibility between Mac OS X Sierra 10.12 and printer drivers for Canon PIXMA inkjet printers.

  Everything is actually to solve these problems.

  Deeply, we apologize for any inconvenience you may encounter.

  Please see ourKnowledge Base article on how to print correctly with Mac OS X 10.12. »

• OfficeJet 7410xi: computer does not have USB printer after upgrade to window 10

  The computer does not find the USB connected printer (Officejet 7410xi) after having modernized the window system 10.

  Hello

  Download and install the following software:

  http://ftp.HP.com/pub/softlib/software13/COL30951/MP-110165-3/AIO_CDB_Net_Full_Win_WW_140_408-5.exe

  During SOUTH clck the link (4th one) software selection step and uncheck the Bing toolbar due to incompatibility issues with MS Edge, then continue with the installation of you

  Please let me know the results,

  Shlomi

• HP laserjet 1018 is not printing after upgrading to Windows 7

  I've upgraded Windows vista to windows 7 and my HP laserjet 1018 is not printing.  The status shows "lazy", is not ready.  Any ideas?

  you use a windows 7 64 bit or 32 bit?

  for a 32-bit operating system, download the software at:

  h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=us&DLC=en&sw_lang=&product=1814094#N670

  for a 64 bit OS, download software to:

  h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=1814094

  for any question about the drivers and software for HP products check this site:

  h10025.www1.HP.com/ewfrf/wc/document?DocName=c01506815&LC=en&DLC=en&cc=us&OS=4063&product=1814094&sw_lang=

• Cannot print after upgrade. Printer works with Explorer

  When I try to print from a web page in Firefox, I get no response in the print area. It started when I upgraded from the previous version of Firefox. Before that, it was fine. My printer is an OKI C3400 and works very well with IE9 and everything. I uninstalled and reinstalled Firefox n success. I am so frustrated, I put IE as my default browser.

  Try of the reset described here:
  
  http://KB.mozillazine.org/Problems_printing_web_pages#Reset_printer

• Cannot print after upgrading the operating system

  I upgraded my iMac OS to Snow Leopard and now my J4680 will not print wireless or cable.  Download pkg driver of HP and had indication of successful installation but still wont to print.  Scan function OK works.

  I have worked with Apple Care and HP people and neither one of them can come to a solution to this problem so I guess the only solution is to buy a new printer.  Don't you think that this will be another HP?  Guess again.  Never another HP product as long as I live!