Cannot print in MS Word 2010

Similar Questions

• Can print control panel test pages, but cannot print from applications (Word, WP)

  Original title: can print test of control panel pages, but cannot print from applications (Word, WP) no error no message other than can not find printer.

  Recently upgraded to SSD as boot drive.  everything is working except cannot print from Word, WP or any application (Editor, etc.).  Can print test pages to control panel on each installed printer, and do not appear.  Try to print from Word he pauses and says "cannot find the printer."  Tried reinstalling Word without solving the problem.  I don't know that the problem is Windows 7 related, not printer hardware problem.  Several times reinstalled printer that also does not resolve the issue.  Any ideas?  Anyone?  Anyone?

  Hi Doug,

  
  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.
   
  
  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. What is the brand and model of the computer and the printer?
  2. have you made any recent hardware or exchange of software on your computer before the show?
   

   
  Please follow the methods and mark the question below:

  Method 1:

  
  Step 1:

  Run the Microsoft Fix It from the link below.
  
  Diagnose and automatically fix problems printing and printer:
  http://support.Microsoft.com/mats/printing_problems/
  Step 2:
  
  Follow the steps in the link below.

  Printer in Windows problems:
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
   
  
  Method 2:
  
  Follow the steps in the link below.
  Find and install printer drivers in Windows 7:
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers
  Method 3:
  Follow the steps in the link below.
   
  Why can I not print? :
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  If the problem persists then I suggest to uninstall and reinstall the printer drivers.

   
   
  I hope that the information above helps you.

• Cannot print from MS Word 2007 P1606dn

  With the help of Windows 7 (64-bit). Just installed my HP laser printer model P1606dn. cannot print from MS Word documents. Reads "problem sending a command to the program". Troubleshooting solutions on the internet all the State spooler problem.

  Not familiar with the technical terms. Really need help, thank you.

  Lenelk

  Hi lenelk,

  This seems to be a problem with Microsoft word.

  What happens if you print from WordPad?

• OfficeJet Pro 8100 does not print envelopes using Word 2010/Win 7

  Hello!  Need help getting my new printer to print envelopes using a 8100 Pro OfficeJet running Word 2010 on Windows 7.

  I'm used to using the feature for envelopes within the Word merge but in doing so, it tries to print on the right side of the page, but the trayonly allows you to center the envelopes (and when I tried sliding the envelope on the side, it prints twisted and cut the address as well (as if he doesn't realize that it is an envelope and not a sheet of paper.)  Just trying to print a single envelope, not a 'real' merge and mailing.  I also tried to change the value by default when the envelope prints in this menu, but nothing works.

  I tried to move to one side only, retype the address in the area directly (instead of highlighting and have it automatically copy in the box) and has removed and reinstalled the printer driver.

  Surely, there must be an easy fix for this.

  Thanks in advance!

  None of this has worked.  You need some sort of disconnect between the printer and the word where it won't just simply print the envelope in the Center.

  On the good side of things, I tried and am able to print envelopes using Publisher (after their model of envelope a little tweeking).  It is not as smooth as to be able to print directly from Word, but it works.  And will be definitely better than a handwritten envelope or label slapped on it.

  Thanks for your help, Spencer. :-)

• How to print envelopes from word 2010 on a HP Officejet 6700?

  A very simple and stupid question, I guess. What is the best way to load envelopes for printing on an Officejet HP6700? Thank you. When you load the envelopes?

  Hello

  Please see the link below for how to load envelopes.

  http://support.HP.com/us-en/document/c03069089

  To print from Word 2010

  Open Word > click Mail tab (top) > select envelopes > enter address > Print. (Default envelope size is 10 to change click options and change the size accordingly)

• Error BCCode: 1000008e and cannot print using Microsoft word or excel

  Original title: I have 2 questions.

  (1) error message (BCCode: 1000008e - BCp1:c000005 - BCP2:BF9472FD - BCP3:AB6A91D4 - BCP4:0000000 - OSVer:5_1_2600 - SP:3_0 - product: 256_1)?

  (2) I have HP LaserJet 6 L printer and it will print the test page put not print other pages to print such as word or Excel.... etc? Note that the test page didn't print that from the printer not your PC

  Hi TurmanTurman,

  1. Did you the latest changes on the computer?
  2. Exactly when you receive the error message? You are able to boot into Windows after the error message?
  3. You are able to print using WordPad or Notepad?
  4. What happens when you try to print using Microsoft word or excel?

  The stop error 0x0000008E occur mainly due to the following:

  • Drive hard damage
  • Problems of material General configuration with the BIOS, memory, hard drive, or with other devices
  • Incompatible device driver
  • Incompatible software

  Check out the articles below and try the steps mentioned, check if it helps.

  General troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E"

  http://support.Microsoft.com/kb/945658

  You may receive an error message on a Windows-based computer: "STOP 0 x 00000050" or "STOP 0x0000008e"

  http://support.Microsoft.com/kb/903251

  I suggest that you see if you can print using WordPad or Notepad on the computer.

  If you are unable to print only when you use the Microsoft office application then I suggest that you post your question in the forums of Microsoft Office.

  http://answers.Microsoft.com/en-us/Office/Forum

• HP 6520: Cannot print from 2016, Word and PowerPoint 2016 but may leave Excel on HP 6520 2016

  Have charged the current driver... Can print from Excel 2016. But can't go to Word or PowerPoint-2016. Paper goes through but not print.

  Hi @Hopefully5,

  Thanks for getting back to me with this information.

  The first thing I would do is check the software and printer drivers. This can be easily done by downloading and running the tool HP Print and Scan Doctor. This tool can diagnose and solve many software issues of print and printer.

  Please let me know if that solves the problem, or if you need assistance.

• HP Deskjet 1512: Cannot print from Microsoft word 2007

  Hello

  I recently bought a HP Deskjet 1512, it scans and copies without any problems, I am able to print images and files of e-mail, but it won't let me print anything from Microsoft Word (2007), I rebooted and reinstalled the software, I ran the hp doctor and nothing works I still can't print There is no error message and it is not in the print queue, it simply nothing if I click the quick print or preview before printing in word.

  Thanks for any help

  Jessy

  Thanks for the help dragon fur.

  Your answer does not solve the problem, but he did something worse either.

  I have it fixed now though it was a security issue blocking MicrosoftOffice to link to all connected devices.

• HP2540 cannot print tables in Word on photo paper

  Hi all

  I have a printer all-in-HP2540 with free Wi - Fi and use Windows 8.1

  I created a table in Word, I want to print on photo paper. It allows to print one-third of the page and then stops (in the same place every time).

  My drivers are up to date. My jpeg images print on paper with no problems. A Word document with text prints on paper with no problems. This table will be printed on normal paper with no problems. I can save the chart in pdf format and print it, but I lose the quality of the image.

  If anyone knows how to solve this problem, please let me know.

  Thank you

  Hello

  If please try following the steps below and let me know if that can help you:

  1. Open the HP Deskjet 2540 software, then click on the link to the Home Page of the printer (EWS).
  2. Click the network tab.
  3. Click network , and then click network (IP) address .
  4. Click Manual IP and then click suggest a manual IP address . An IP address manually, the subnet mask and default gateway shows.
  5. Remember to take note of the IP address and confirm the changes, and then close the EWS page.
  6. Of the HP Deskjet 2540 sotfware click the utility tab, and then click IP address update.
  7. Type the IP address that is configured manually, click Save and confirm.
  8. Open Control Panel and go to devices and printers.
  9. Right click on the HP Deskjet 2540 icon and select printer properties.
  10. Open the Ports tab.
  11. Click Add Port , select Standard TCP/IP and click New Port.
  12. Follow the procedure by typing the IP address that is configured manually and confirm the changes.

  Now try printing and check if the problem solved.

  Kind regards

  Shlomi

• Cannot print Duplex in word on the J6450 printer using MacBook Pro

  I currently have a MacBook Pro with Microsoft Office for Mac 2011.  Using Word, I can't understand how to print two-sided my HP J6450.  Help, please.

  I tried again and part of your answer works.  When I changed the selected printer of HP J6450 Fax in HP J6450, HP printing accessory choice two-sided (duplex unit) then become available to verify.  However, if you are using Mac MS Word 2011, I noticed that the dialog box layout has does not match your screen prints.  Under "Presets", I have a choice called "Copies and Pages".  My screen is a little different that yours, but your instructions are so good that I was able to link edge long.  Once this has been verified, I was able to print double-sided.  Thank you!!!  One last question, using the Mac, what are the commands to do a print screen?  Thank you once again.  You make my life easier.

• 477dw Pagewide Pro MFP: MFP Pro Pagewide 477dw tries to print to tray 2 documents and envelopes for Tray1 in word 2010

  Set up the new printer and printing from Word 2010
  Printing documents to default tray 2 works fine, but when you try to print an envelope in Tray 1 it always says that we must put the envelopes in tray 2 even if in the shortcuts in printing preferences, we have selected 1, tray with envelopes, for this document.
  Also tried auto select paper source and no change.

  What would be ideal, that's what we had with our old HP printer where you click on print and it went to the default (tray 2) Letter/A4 paper tray, but if you put something in the manual feeder (Tray 1) it would print automatically on this site until he missed and then switch back to the main tray (tray 2).

  Pulling my hair out over the new printer so any help would be greatly appreciated.

  BTW.
  Tried to file a case of pension, put in the serial number and it says this product not supported by this site, click here to go to HP enterprise.  Tried to submit a case of pension to enterpise and got the same message pointing me back the first page, so just round in circles, I can still apply for assistance.

  Hello

  I understand that you are having trouble with printing to different trays on a PageWide Pro printer. I want to help you with this. There are two pieces to this puzzle - the printer settings & settings on the computer (in an additional post, I'll add more details)

  PageWide Pro has the ability to support your ideal scenario.

  What would be ideal is what we had with our old HP printer where you hit print and it went to the default letter/A4 paper tray (tray 2)  but if you put something in the manual feed (tray 1) it would print automatically on that instead until it ran out and then switch back to the main tray (tray 2).
  

  The printer settings

  • Tray 1 set to any size and any Type
  • Configure tray 2 (+ other trays) to the paper size and type in the status bar
    • Configure the status bar by opening / closing the tray and using the size/Type prompt - provided it clears any existing stored measured value.
  • Manual feed set to OFF (manual feed replaces the Printer Auto Select Paper Source setting) (not a factor based on your description)

  Driver settings

  • The important thing is that your print job is sent using the configuration of driver Paper Source>printer Auto Select.
  • Make sure that paper in the word document settings match the status bar settings previously configured on the printer

  At the beginning of the print job, if the media is present in the Tray 1 (Any/Any value) and the print job is sent "Printer Auto Select", tray 1 we'll pick first until the media runs. (The printer will assume that you have placed media in Tray 1 which corresponds to printing)

  However, if the media is placed in the Tray 1 in the middle of a printer Auto Select print job, media will be very probably not selected. It is important to maintain the consistency of the size of the print media & type.

  Kind regards

  Jay

• When I print a booklet in word 2010 the text prints really small. Only, it takes 1/4 page and should be 1/2 page. I don't know how to fix it.

  When print my document in booklet form always prints very small text. If small the page takes only 1/4 of page of the book when he should be taken to the top of the opening page of 1/2. I don't know how corect the problem. Any help would be aprisheated.

  You'll have more luck asking experts in the Word 2010 forum.

• change suddenly in the front and back with Word 2010 and JO 8600 Pro printer

  I have been successfully using Word 2010 and my Officejet Pro 8600 - to set duplexing if necessary.

  I used printing without margins to print 8.5 X 11 brochure and was happy with the result (no white space on both sides).

  However, this somehow messed up the original settings and I am unable to print in duplex mode now. The only option is "manually print on Both Sides.

  Help!

  Sunshyn, I can still double-sided of MS Word my other printer... I have a Canon laser as well.

  I have Windows.

  I think I have the solution... I couldn't change the settings of the print window. But I did enter the printer via the control panel and found the same parameters, but also found the apply"" button. Then I "applied" my desired settings and things are fine.

  However, it is a little confusing because he wasn't the "Apply settings" button in the menu printing, so wouldn't change.

  Now I know that go through the menu of the printer, the print document settings.

  Thanks for following up... I think I'm OK for now.

• problem printer my printer cannot print my word document, but it allows to print an e-mail message in my Inbox to

  my printer cannot print my word document, but it allows to print an e-mail message in my Inbox in

  Since the problem seems to be isolated to the word, please repost your question in the word of the Group Discussion Board section at: http://www.microsoft.com/office/community/en-us/default.mspx?dg=microsoft.public.word.docmanagement&lang=en&cr=US where issues of speech specialists will be more than happy to help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• oficejet k80xi win7 - doc in word 2010 won't print the background of any border when adding to a doc?

  New gateway w / Win7 64 bit

  Word 2010 (Office Pro 2010)

  HP Officejet K80xi - USB connection

  For some strange reason, whenever I try to add a border (does not appear what kind of importance), it looks good in the 'page' mode, but when I go to print, the preview does not display the bottom of the border line, and it will not be printed.  The other sides (top, right, and left) display and print correctly.  Microsoft took the same doc that I did this and it worked well for them, so the conclusion was that the printer driver perhaps is?  I would be happy if I could change a setting in Word, or the printer if I can get the entire border to print!  It doesn't seem to be any other question, I noticed with Win7 and this printer so far.

  I managed to 'fix' it is by changing the settings as follows:

  Set margins on all sides over.5 inches

  Define the edge of page to adjust the text rather than the edge of the page

  And play with the number of points and sizes of margin, as well as making my text further down until I got the best looking for border and possible space - is not ideal, but worked and printed.  Thanks for your suggestions.

  I think it is likely that the printer itself has a few limitations of the border and is old and probably would not have this issue had just bought a new printer rather than ink.  I don't like to mix old printers so they are still works well!