Cannot print on canon pixma ip1700

Similar Questions

• Canon Pixma iP1700 reports a paper jam

  All of a sudden my Canon Pixma iP1700 does not feed the paper in rolls.  It seems to be a blockage on the right side of the roller.  It keeps telling me there is a paper jam, but I know it does not exist.  The printer worked fine until this week.

  Hello

  (1) have tried to update the printer driver and check if the problem is resolved?

  (2) I would also like to know what operating system you use and if all changes made on your computer before the show?

  If the drivers are up to data and there is no problem on your system software, you will need to contact the manufacturer of the equipment and get the printer checked.
  Please click on the link below to check how to contact the hardware manufacturer support.

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_ip_series/pixma_ip1700#ServiceAndSupport
  Also, check the link below for the resolution of the printer problems in Vista.
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  This is true for Canon Pixma iP1700

  http://www.Canon.ie/support/Consumer_Products/products/printers/inkjet/PIXMA_iP_series/iP100.aspx?faqtcmuri=TCM:24 - 604147 & page = 1 & type = faq

  Hope this information helps.
  Concerning

• Cannot print using canon print pro

  Hello

  I'm pretty new to all this hoping that if anyone can help, I am currently running Photoshop CC on my Macbook pro with Yosemite 10.10.

  I just invested in a pro 100 canon printer, but cannot access the canon software pro printing studio, it works fine with lightroom. the manual of canon said it must be accessible via file > automation >, but it isn't here. should I load the software using the extension manager? If yes how to do this please?

  Hi stevenh,

  Please check the below thread related to the same issue.

  Canon Pro in Photoshop CC 2014 printing Studio

  Let us know if it helps.

  ~ Mohit

• Cannot install the printer driver (canon pixma ip1980)

  IM using windows 7 (x 64)

  also cannot use add printer in Control Panel > hardware and sound > devices and printers

  -something pop - up and say ' the local print spooler does not.

  -Cannot find the driver on the internet too...

  Please help me... Ive got tons of work to do...

  Hi momo lulamka,.

  1. at the printer works very well under Windows 7 64-bit sooner?

  The compatibility of Windows 7 Center believes that any information on this model of printer there is a possibility that this printer is perhaps not compatible with Windows 7.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=hardware&s=Canon%20pixma%20ip1980

  Method 1

  As a work around you can check if the print spooler service is running on the computer.

  A print spooler is the service that temporarily stores the disk printing hard or in memory until the printer is ready to print.

  You must be logged on as administrator to perform these steps.

  (a) open administrative tools by clicking the Start button, then Control Panel. In the search box, type Administrative Tools, and then click Administrative Tools.

  (b) double click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (c) right click on the print spooler service, and then click Properties.

  (d) under the tab general , next to Startup type, make sure that Automatic is selected.

  (e) if the service is not already running, under Service status, click Startand then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

   

  Method 2

  If the above step failure then run the troubleshooter available in the link below.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  I was unable to find the drivers for the printer on the Canon website according to the link below, you will need to contact Canon for more information on the pilots.

  http://USA.Canon.com/Cusa/categorySiteMap.action?pageKeyCode=categorySiteMap&nodeCid=0901e02480069f84&expanded=true

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• A DVD of printing on Canon Pixma Pro-100

  I try to print an image on a DVD using the above referenced printer. Lightroom and Photoshop Elements keep send me error messages that the inner cover is open. Of course, it is open: you must insert the drawer of the DVD to print! I also tried Canon Easy-PhotoPrint EX and my garden of Image. Both apps work fine and don't trigger the printer error message except that the image is larger that the DVD any image of the size that I use. My latest attempt involves a picture that was 2.5 x 1.75 "according to the standard 12cm (4.72") DVD, but the printed image much larger than the DVD.
  Any suggestions would be greatly appreciated.

  Hi Ken_k,

  It is recommended that you contact the direct technical assistance. There is NO charge for this call. Information in real-time to a technical assistance call live would be very beneficial in this case.

  Please call 1-866-261-9362, Monday - Friday 10:00-10: 00 ET (excluding holidays). A Canon technical support representative will be able to solve this problem more quickly.

• How to download printer driver Canon Pixma MP240 on a disk with Vista Home Premium installed on the old PC with XP Home not connected to the internet, THE WAY EASY, PLEASE

  I have an old PC running Windows XP Home on the internet, has lost the MP240 printer driver. You want to download the drivers for it on my Vista Home Premium to install in the old PC. I can't get the internet to work with the old PC, or I want to download the drivers directly here. I found a few options for pilots with the Vista computer, but they all want allows you to download the diagnostic and I won't be using this printer on my Vista computer, so I don't want to do it this way. Any place that I can just download the DRIVER ONLY and put it on a disk to load in the old PC. Help, please

  I think you'll find a driver here: http://software.canon-europe.com/products/0010645.asp

  English version: http://software.canon-europe.com/software/0035873.asp?model=

• Cannot print using Canon Image class 4150 MFC

  * Original title: driver windows 7 canon image class 4150

  I bought a new laptop with windows 7 and downloaded the driver for my Canon Image class 4150 MFC, but it still does not print.  Someone at - it answers on what can I do?  I downloaded the driver from the Canon website.

  Hello

  1. What's happening while you try to print?

  2. do you get any error code or error message? If Yes, what is the exact error message?

   

   

  Method 1: Run the printer Troubleshooter and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

   

  Method 2: Run the Microsoft Fix and check.

  Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/

  Let us know if it helps!

• my printer is Canon pixma ip2702, but I do not have the disk, I can't conect with my computer says Error 41 is imposible

  where can I find the answer to my problem?

  Hi carlosVillalobos hotel.

  1. what operating system do you use?
  2. What is the full error message you get?

  I suggest you to select the operating system, then download and install the drivers from the following link:
  http://USA.Canon.com/Cusa/consumer/products/printers_multifunction/photo_inkjet_printers/pixma_ip2702#DriversAndSoftware

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Unable to connect w / Canon Pixma MX860 printer now I ElCapitan.  Need to print today... any suggestions?

  Just upgraded to El Capitan and now cannot connect with Canon PIxma 860 and not financially able to buy a new printer... no workaround solution suggested?  Canon has written is not compatible with El Capitan.  I have to get off at Yosemite?  Thank you.

  http://GIMP-print.sourceforge.NET/MacOSX.php

  This link should make your printer work again.

  That said, I've not heard of Captan El is not not compatible. But this fix should work.

• PROBLEM WITH USB CANON PIXMA MP550 PRINTER PRINT SPOOLER

  I have a problem with the main PC.  No printer is displayed in the Control Panel printer page. When I try to add a printer the message tells me that the print spooler does not work.  I also get the error: "error 0x000006e". I tried all the usual bugs (via Services', etc.) without success.  Gives the print spooler to think it's on; I have reset several times and he shows IT, but it does not work, says the message I get when trying to add a printer.  I have attached the sfc/scannow process found no corrupt files. I tried a 'restoration' without success.

  The laptop can find the printer, a Canon Pixma MP 550 and it works well but the right main PC cannot find all printers in the control panel or through different programs (WORD, etc.) and will not let me add a few.  The home network seems fine and both computers recognize each other and I can access files on the other computer.  But on the PC, there is no printer on the network.

  Also, I tried the canon Pixma MP 550 "My Canon" routine Diagnostics.  It did not find the printer even when it is plugged directly into the PC's USB port.  This could be a problem of LPT 1?  So, I don't know how to access the LPT to reconfigure.

  I also opened OUTLOOK and WORD and tried to add a printer in this way, but I get the message: "the Active Domain Services are currently unavailable.

  Grateful for any help here.   All the usual bugs have been tried.

  Concerning

  Yesterday sorted Arthur Xie method.  See the link;

  http://social.technet.Microsoft.com/forums/Windows/en-us/3e47b7b6-00A3-47E1-9e28-e615fbff5f87/cant-add-printer-print-spooler-crashes-error-code-0X000006BE?Forum=itprovistaprinting

  It was a registry conflict where there was too many folders/files/etc in the current directory. TY anyway.

• Canon PIXMA MG2120 & printer driver installation to installation problems

  Hello. I just bought a pc laptop ASUS R503U which Windows 8 operating system.  I can't install the driver or complete installation of my printer, a Canon PIXMA MG2120 on my new laptop.  When I try, I get a message that says: cannot install driver mp because it is being used by someone else to the computer.  When this occurs, the installation process is abandoned. I tried to reinstall, disable the firewall, reboot, but I keep getting the same message always. What gives?

  Hello

  As Canon OEM is responsible for the good operation of the printer and their
  drivers provided. Check with Canon support, online documentation, and
  drivers.

  Good luck, you need to update or reinstall the latest driver.

  Canon - PIXMA MG2120 - drivers<- set="" to="" your="" version="" of="">
  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mg_series/pixma_mg2120#DriversAndSoftware

  Canon - PIXMA MG2120 - Service and support
  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mg_series/pixma_mg2120#ServiceAndSupport

  Canon - Support and drivers
  http://www.USA.Canon.com/Cusa/support/consumer

  Canon - Support - contact us
  http://www.USA.Canon.com/Cusa/consumer/standard_display/contact_us_consumer

  Canon - Windows - Vista and Windows 7 support
  http://www.USA.Canon.com/Cusa/consumer/products?pageKeyCode=windowsSupport

  Canon printer - page local confirmation - could be from another region.
  http://pdisp01.c-WSS.com/OS/

  ====================================================

  The main issue is probably the drivers, but these can help:

  Windows 8 - Fix printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Windows 8 - How to troubleshoot printing problems in Windows
  http://Windows.Microsoft.com/en-us/Windows-8/How-to-solve-printing-problems

  Windows 8 - install a printer
  http://Windows.Microsoft.com/en-us/Windows-8/install-a-printer

  Windows 8 - find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows-8/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Canon pixma mp530 poster error scan on LCD.

  Original title: print printer print

  Canon pixma mp530 poster error scan on LCD

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• Canon PIXMA MP160 error message 'cannot communicate with scanner.

  I have a Canon PIXMA MP160, who worked during the scanning of the printer on my computer. Now, I get an error message "cannot communicate with scanner. Installation scanner no longer works. The Canon site suggested looking in the Windows directory for a file named ' USBSCAN. SYS, but my research has not found it

  Installation scanner said that all the files are in place until it reaches the end.

  I received an update of windows on 31/10/2011. It works

• I can't access my CanonMX3 printer (Canon Pixma MX320 Series) of my computer running Windows 7, since I've changed in Windows XP.

  I REALLY NEED HELP TO CONNECT MY PRINTER TO MY COMPUTER OVER ETHERNET NETWORK!
  
  I am too having the same problem. But when my Windows 7 detects the printer (Canon Pixma MX30 Series), it says: "cannot connect to the printer access denied." in another window that says: "connection to CanonMX3 on...» Driver search. I installed the drivers in normal installation and also while in Windows Explorer.

  I'm running an T3304 eMachine with concert 1.3 gig RAM 2.0 GHz 100 HARD drive. When I was running Windos XP, I had no trouble to run my printer on my computer. The printer is connected to another computer and I access it through the other computer via ethernet gateway. My ethernet gateway is a Desktop Switch ProSafe NertGear 120/100 5 - port.

  I did everything as I would have done it all by running Windows XP and also used the Windows 7 help files. Everything I read that I made and I am still unable to connect to the printer and print. I went as far as hanging the printer on my computer, and that day, I was actually able to print even if it's with erors. I contacted Canon and downloaded the new drivers for Windows 7 and still no luck.

  When I ran Windows XP I would install the printer on my computer and I have it print to a file and it would be later configuration of the port it to connect through. I have also tried this and no luck.

  What operating system is the computer that has the printer connected to the current?

  Also check the permissions on the printer... is the username of the Win7 PC added to this?

• Windows 7 can not find .inf driver for Canon Pixma iP4000 printer connected to Windows XP.

  I have a laptop running Windows 7 (64-bit machine) I want to print from.  The laptop is on a home network wireless.  The office is wireless as well and is running Windows XP.  The Office has a Canon Pixma iP4000 printer connected with a parallel cable.  I installed the latest XP drivers for the printer on the desktop.  The laptop can connect directly to the printer with a USB cable and drivers will download automatically and it will print correctly.  However, I can't connect the printer using the wireless system.  I can go on the laptop to the home network and navigate to the printer and try to install.  It makes an automatic search and says that it cannot find the correct drivers.  I can browse to the file to install on my desktop, but it of an .exe file and not. INF.  I run the .exe file and it installs too, but Setup of printer on the laptop won't let me not by the .inf screen add to complete the installation of a wireless printer.

  Any suggestions?

  Very probably the XP driver name is different from the name of 64-bit driver.  Create a Local Port which copies the data to the print size in Windows 7.

  Here is an article knowledge base how to the names of the incompatible drivers.  Replace the Windows 7 machine for NT4 machine referenced in the article.

  http://support.Microsoft.com/kb/282842

  If you load the printer driver 32-bit on your 64-bit computer, you need the 32-bit driver for Windows 7.  You can do if you have a 32-bit computer of Windows 7 on the network to push pilots up to the machine that is sharing the printer.  None are flat files on the Windows 7 DVD, you need to install the OS or mount the ISO.

  The key to successful sharing between computers that run different printing architecture processors is pilot name.  PCL6 equal NOT PCL 6.

  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1