Cannot print to HP 3600n network printer in Vista

Similar Questions

• Cannot print from Vista laptop after going DSL ATT Uverse. __

  Have a XP PC with a Canon Pixma 310 connected via USB.  Before Uverse, I was able to print from my Vista laptop that is used wireless.  I checked to make sure that the printer is shared on all parameters. When I try to print from laptop, I get a window indicating the printer is not enabled.   I spoke with Cannon and Uverse mean that it is a Vista setting.  not need to change anything, other than the DSL, uverse.

  You use a different wireless router now that yopu use Uverse?  Is the printer connected to a PC in your local network, or is it wireless itself?  Open your printers folder and right click on the print queue.  Click on properties.  Select the Ports tab.  Scroll down to the port that you use for the queue.  What is an IP address?  If so, is this the right place?  If you have changed wireless routers, the local address may be different from what it was with the old router. Brian Tillman [MVP-Outlook]

• Cannot print the Vista Home Premium laptop on printer Epson Workforce 610 wireless

  Tried to implement printing wireless since our Toshiba laptop under Vista Home Premium to an Epson Workforce 610 printer.

  I have already implemented printing wireless this printer to my desktop under XP Home SP3 without problem and continue to be able to print from there.

  I went round and round with Epson.  They helped me get the printer configured on the laptop, but because the printer is working from the office, they say that it is no longer their problem.

  Here's what I know:
  -Wireless running on a Belkin Wireless G router, model #F5D7230-4, v.6xxx, with the firmware update.
  -L' laptop and printer are both connected to the same secure wireless network.  IP addresses all look OK, and I can see all devices when I look at the settings of the router.
  -I am running Trend Micro Internet Security 2009, but I turned it off.
  -Windows Firewall is also disabled.
  -I can print via the wireless router if the laptop is connected directly to the router.
  -No, I can't print from the laptop to the printer if the laptop is connected to the wireless network.

  I think there are some settings or configuration of Vista which is at the origin of the problem.  I looked the likely candidates in the properties of the printer and in the center of network & share, but I don't know enough about Windows or Vista to really know what to do.  Anyone has any ideas on this?

  Hello

  My suggestion would be to update the firmware on the router and wireless adapter first.

  Go through the following article. It can help you
  http://support.Microsoft.com/kb/314073

• Cannot create an ad hoc network on Windows Vista

  Hi all

  I tried to create an ad hoc network on my PC but as soon as I get a name and a password, Windows returns the message "Windows cannot create the network"XXXX" I've not really changed anything since yesterday when I was able to create another network without problem, except a failed restart (to manually turn off my PC because restart took too long).

  I tried to change the Autoconfiguration WLAN service (as had been suggested at: http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/cant-create-an-ad-hoc-network/94028a00-54ec-4cd1-81a0-ab35718d62e5) but it is already configured in automatic mode, and it did not work.

  Any help would be greatly appreciated I need emergency back network!

  This info should help:

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-computer-to-computer-ad-hoc-network

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-computer-to-computer-ad-hoc-network

• printer cannot be contacted over the network

  I have a HP deskjet 656 printer that I added as a network printer. I installed it on my computer laptop windows 7, which went well. However it does not print. The touble shooter printer tells me to 'the printer cannot be contacted over the network. It works from another laptop I have but not my laptop Windows 7.

  I had a similar problem with my new Windows 7 laptop. After a power failure, the laptop would not recognize my HP printer and the error was that "the printer cannot be contacted over the network" so I spent a lot of time to solve the problem. Finally helped the simplest thing was that I removed this printer in my list of printers and added again using the "Add a printer" Wizard and it worked perfectly!

• I can't get my printer to connect to my laptop. It is said repeatedly 'cannot be contacted over the network, the network administrator.

  No matter what I try, I can't have my printer to connect to my laptop.  Continually, he said "cannot be contacted over the network, the network administrator.  I made this and conducted many helps out.

  What can I do now?

  Thank you.

  Pamela

  Hi Pamela,.

  This must be different. Rest assured that we would do our best to help you.
  
  Please answer the following questions that would help us to understand the issue.
  1. What is the brand and model of the printer?
  2. What are the troubleshooting steps you have tried so far?
  3. were there any changes made to the computer before the question?
  4. how you try to install the printer?
   
  Read the following article that helps you identify and fix common printer problems in Windows.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
   
  If you have any questions do not hesitate to answer, we would be happy to help.

• hp 8600 printer cannot be contacted over the network and the printer is not enabled.

  hp 8600 printer cannot be contacted over the network and the printer is not enabled.

  the HP software installed on the PC on the floor. Print wireless from PC upstairs and the PC in the basement on the network for the last month up to yesterday

  Now to receive above - two error messages cannot be contacted ove RL network and the printer is turned off.

  Reality - the printer IS on and the PC on the floor can print to the printer.  Network on the printer symbol says it is connected to the network.

  a reason any PC in the basement all the cant suddenly find the network and the printer?

  Hello

  The first thing I would do is follow step 6 in this document to set a static IP address: http://support.hp.com/us-en/document/c02817031
  When it askes for the DNS information, enter in Google DNS. Preferred DNS = DNS Alt = 8.8.4.4 8.8.8.8

  This could increase the stability of the network connection to the printer downstairs.  If this does not help, let me know what OS is on the computer causing problem, because that could cause a problem?  Other than that, you can check the quality of the signal you get form the network and see if this can be a problem.

• Sharp MX-2614n - 10,11 drivers - cannot print

  We recently bought a new Sharp printer in our office - MX-2614N. Unfortunately, I was unable to find the drivers on the Sharp site. Unlike the old model MX-2600N, which prints without fault, I am unable to do this print even printer with a standard postscript driver.

  My Mac with 10.11 can see th printer on network morning and it asks to download drivers or offers standard drivers. Unfortunately no luck.

  Recently, I discovered a package on some unofficial site with 10,11 drivers hidden in MX - C26.pkg, which adds dozens of printer in library/printers/PPDs/happy/Resources you want SHARP MX - 2614N.PPD.gz, dated 11.9.2014, but the printer cannot print even with this printer driver. I contacted the local representative of STRONG, but not luck.

  Does anyone have a solution for this printer - how to print even in a default configuration without any particular add ons (like duplexer, paper extra. storage etc..)?

  I tried one of these:

  http://support.sharp.NET.au/drivers/

  -version 1.6.0.6 to 10.11 26.1.15 - no luck

  http://www.sharp.co.UK/CPS/RDE/xchg/GB/HS.xsl/-/html/product-details-Office-Prin t - 2373.htm? product = MX2614N

  -version 1501b 27.1.2015 - no luck

  Keson wrote:

  I am unable to do this print even printer with a standard postscript driver.

  The new machine has a PostScript printing package? For many brands of printers Postscript kit is often an option and without the SDK installed, you will not be able to print using Sharp or generic Postscript PPD MX-2614 - driver who stands for Postscript Printer Description.

  Note that some devices support PCL as standard. There is a generic PCL driver included with OS X. This driver does not print in black and white and has a default value of print resolution of 300 dpi. But at least it will let you print.

  You can also find that the Sharp supports AirPrint. If you can then you will be able to use the AirPrint driver in OS X, which will let you print in color and print on both sides and even staple (if it has a base unit).

• OfficeJet 6500 E709n: Cannot print after upgrading Windows 10

  Cannot print. "Doctor print" said there is a software problem.

  Uninstalled the drivers and reinstalled the software complete... twice.

  Capable of printing in color "internal" wireless test page but cannot print a doc and it does not show in the Panel "see what's printing.

  Uninstalled all printers if none showed, in the Panel. When the software has been reinstalled, it showed two Officejet 6500 s on the control panel.

  I tried the post install 'Print sample' with each check printer default and no work.

  Seems that the problem started when I "upgraded" to the new Windows 10.

  Kili2 wrote:
  

  Cannot print. "Doctor print" said there is a software problem.

  Uninstalled the drivers and reinstalled the software complete... twice.

  Hi Kili2,
  
  Try to install your printer via "Open network" - via the window icon or desktop to explore - and choose 'Add devices and printers' (you may need to click the arrow next to the question mark for the top menu show).
  Let the wizard to search for awhile, selcect your printing device, and click 'next'.

  

  After you follow these steps, search for the new installed printer (the name is shown in network for printer and scanner) in "Printers and devices" in the control panel.
  Use this printer as the default printer and you should be able to print over the network cable or wireless.

• After the upgrade to el capitan, cannot print Canon mp970

  Upgrade to El capitan in snow leopard, and now I can't print from my Canon mp970. I went to the site Web of Canon for a printer driver is compatible with the new operating system - found nothing. Found some threads on Apple support community and found a suggestion that recommended to download and install the Gutenprint (CUPS + Gutenprint v5.2.11 - simplified pre2) software. I did that and removed the driver from Canon, but still cannot print. The message I get from the printer is: 'you need to install the software to use this printer. " To install the software, choose App Store... from the Apple menu. If the software for your printer is not available in the App Store..., contact the manufacturer of your printer. »

  Any suggestions on what to try next?

  Hi Dellis46

  I met the same problem and tried several things before finding the solution for the print job. You must install the drivers 'old' Mountain Lion. They still do the job.

  Go to: http://www.canon-europe.com/support/consumer_products/products/fax__multifunctio nals/inkjet/pixma_mp_series/pixma_mp970.aspx?type=drivers&driverdetailid=tcm:13-833845&os=OS%20X%2010.8%20 (mountain % 20Lion) & language = EN

  Download the .dmg package and open it. Dubbel click .dmg package and follow the instructions. Connect your printer by a usb cable and turn on the printer. If not now, it won't work!

  Then, go to the apple/menu logo and choose Preferences system - open printers & scanners - click on the button "+" under and on the left side.

  If the printer is on and the installation of the finished, .dmg package you should be able to see in a new menu 'Add printer' one or more printers. Add one you need. If your mac is connected to the local network you will see a usb and printer of netwerk MP970 canon MP970 canon (network printer takes a while to appear), including its network address. Add the two printers and name them differently to avoid confusion.

  Now everything should work.

  It is for the printer. I can't understand how making the scanner works. Run the .dmg package for the scanner is not operate :-)

  If someone is tried: http://www.canon-europe.com/support/consumer_products/products/fax__multifunctio (mountain % 20Lion) nals/inkjet/pixma_mp_series/pixma_mp970.aspx?type=drivers&driverdetailid=tcm:13-966569&os=OS%20X%2010.8%20 & language = EN

  I'd be more than grateful to the person who in fact occur...

  See you soon!

  Tjerri

• HP Photosmart C6280: cannot print on C6280 wireless after the upgrade to Windows 10

  Cannot print on C6280 wireless after the upgrade to Windows 10. Have removed the device, but try to re install the printer when is not found. Can print if I connect USB. Tried to reload the driver using HP Support software help, but when he arrives at the end of the download fails.

  Hi @Ron9871,

  Welcome to the Forums of HP Support!

  I see that you are unable to get your printer HP Photosmart C6280 wireless printing. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I would like to try the steps in this guide, "offline" Status Message printer (Windows 10).

  If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  • Print a Page of Network Configuration menu of the printer front panel. Note: the IPV4 IP.
  • Type the IP address in the browser to bring up the SAP.
  • Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
  • Select Manual IP.
  • Enter your IP address manual (192.168.0.232)
  • Enter 255.255.255.0 for the subnet mask, except if it is different.
  • Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
  • Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
  • Click on apply.

  Please restart the router, the printer and the computer in this sequence.

  If you're still having problems, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  • Use the File Checker system to repair missing or corrupted system files. It's always a good idea to back up your data before proceeding.
  • File system check (SFC) analysis and repair system files & DISM to fix things that are not SFC.

  You can try to change your WSD printer port by a Standard TCP/IP port.

  To do this, you will need your current IP address printers.  The Network Setup page shows the parameters of network for the product. To print this page; Press the button of network () on the control panel of the product.

   

• Cannot print more than two pages

  Hello here

  I have a rather strange problem today: one of my users cannot print more than two pages...

  Regardless of the printer, the application or document, this specific user will receive the first two pages printed on the right, then a windows error (cannot print, the likely reason is a failure of the network, not enough memory, etc.)

  Current config is

  -User logged on the Witch of Windows 2008R2 Server Citrix XenApp 6.5 (published desktop).

  -Print server Windows 2008R2 with something like 150 shared printers

  I tried with other printers and file formats, on separate servers, it's always the same.

  Of course, everything works perfectly fine for other users...

  I'm not sure if any parameter can block printing up to two pages only, or anything else. Before you delete and recreate the user profile, as everyone has an idea?

  Grey'

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Cannot print - error activates directory

  Original title: printer print print

  Cannot print; Get the message "Active Directory Domain Services not available

  USB printer should Plug and Play.  Usually not necessary to launch the add printer.  If you get an error of announcing launch printui /ip command line.  If the machine is Pro or higher, you can configure the policy in computer / administrative templates / printers / printer add, network scan page Managed networks in gpedit.msc so network scan Wizard is never executed.

• OfficeJet 4635 - cannot print in Windows 8

  I installed the OfficeJet 4635 successfully on my Windows 7 and XP machines by using the wireless network.  I installed on my Windows 8 machine using the full features of hp.com driver, can see the printer but cannot print.  I ran the print and Scan Doctor whenever the error that the driver must be uninstalled and reinstalled.  I finished this process 3 times now.   What else should I try (in addition to resume the printer?)

  Hi RPG_78,

  Welcome to the HP Forums!

  I understand that you can not print in Windows 8.

  I suggest a different manual uninstall. Then use our printer HP install wizard for Windows for a re - install.

  Hope this helps, thank you for posting.

• Cannot print on a Brother printer after Windows Update

  We share the same brother MFC-8660DN on a network (Win XP x 4 & Win 2008 Server x 1), everything was fine until yesterday (16/09/10). 2 XP computers cannot print (Status: printing error) just after the recent update of windows installation (windows auto update has been set for each week). When we tried to print to the brother printer, he would be stuck in queue for a minute and a bubble pop up "document cannot be printed." 2 computers work fine otherwise. Everything works normoally and can be printed to another printer like Canon. (PS: I tried to uninstall and reinstall the brother printer driver, but no luck the question of setting)

  On the other hand, the other 2 XP did not have an update, and so they can't always print on the Brother printer. Also, Win 2008 server doing a windows update auto but print very well so.

  Therefore, I believe that the update of windows XP must have something to do with the printing error. Is there a fix or update? Alternatively, we can uninstall the recent windows update (only one?) to solve this problem? I'm not sophisticated OS, do not know what could be uninstalled. Help, please!

  I received a call from a client 2010-Sep-16 that they could no longer print
  on a network printer from any workstation.

  Workstations have Vista Business 32 and have been updated morning of September 16.

  The server is Server2003 & printing it still worked well.

  Printers using IP ports very well for more than 2 years.
  Fix was to use instead of the intellectual property & create ports with the full share name.
  
  The IP address of the printer had not changed AND
  I couldn't always navigate with IE8 (using IP address)
  printer see printer configuration data

  Workstations are Server 2003 domain

  This trick of name full-fledged was how I had to put in place
  Vista Home Premium workstations
  to use network printers in home networks.

  Why Vista Business "updated" settings for Home Premium?
  Is this a permanent 'update '?

  Why no matter what version of VISTA do this?
  Windows 7 has the same problem?

  With Vista Business 32 (short-term)? solution was to change the port to a local port with full sharing of the printer name

  See you soon

• Cannot print in color of HP Officejet 6310 all-in-one

  I have a printer all-in-one color HP Officejet 6310, connected to the network. The ink levels are fine - I just bought new ink.

  The printer cannot print in color, my computer Windows laptop, no problem, but will print in black & white Mac.

  Why? Y at - it an option for color printing that I haven't checked? How can I fix?

  go to the icon of the Apple at the top left > system preferences > printers and scanner/print and scan / print and fax.

  remove the printer using the "-" lower-left next to the icon (+)

  After you remove > press the plus (+) icon.  > Click on 'Add a printer or a scanner', if it has given you this opportunity.

  in the new window > click on the name of your printer. Then check the bottom > NAME, LOCATION, PRINT USING (USE).

  Make sure the part "USE" or "PRINTING to AID", it should be the AIRPRINT printer name not.

  Then ADD at the bottom right. > try to print in color now.