Cannot print without wire - HP photosmart premium

Similar Questions

• Cannot print in windows 7 Home premium 64-bit

  I have a new PC with Win 7. I can't print from MS 13 office (Outlook, Word, etc.) 11 Explorer IE, Chrome, etc. The printer is communicating with the PC, I can scan a document to your computer. I reinstalled the HP printer driver for my Photosmart 6380 and I was able to print a test page for the HP software, but I can't print a test page for the printer configuration in windows. I see on the Microsoft forums that it might be a compatibility problem; I can't find a compatibility setting in one of the printer config options (properties, properties of the printer, etc.) Suggestions?

  Hi William,.

  I understand that you cannot print using Microsoft office, Internet Explorer and Chrome.

  Basically, you cannot print anything.

  This problem may be caused for the following reasons:

  • Drivers are corrupt.
  • Problem of the printer.
  • Conflict of third-party application.

  I checked the compatibility of the printer, it is compatible with Windows 7.

  1. Since when are you facing this problem?
  2. You recently made any changes to the computer?
  3. How the printer is connected to the computer? (With or without wire)
  4. What happens when you try to print?

  Please follow the methods and check them off below if it helps:

  Method 1: Clean boot

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows
   
  http://support.Microsoft.com/kb/929135
   
  Note: After troubleshooting, consult this section «How to reset the computer to start normally after a boot minimum troubleshooting»

  Method 2: Uninstall the printer and reinstall

  Please uninstall the printer, and all applications of the printer and scanner in Control Panel.

  Reinstall the printer:

  Please visit the printer manufacturer website and download the drivers based on the architecture of the computer (32/64-bit):

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=3560280

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Extremely slow printing wireless with HP Photosmart Premium C309g-m

  I see extremely slow print speeds when printing from a Mac or a Windows XP system on a new printer HP Photosmart Premium C309g-m wireless. The printer starts printing immediately when I request a print, but it only prints one line. It will take about 15 minutes then to print the rest of the page, each print after a very long break line. Print demo page doesn't exhibit this problem, only documents of programs such as Word 2008, Safari, and Firefox (I tried firefox on PC and Mac) are affected.
  
  If I connect to the printer via a USB connection it prints very well, so this problem seems to be the only wireless printing.
  
  Printer: HP Photosmart Premium C309g-m
  Computer: Mac mini (late 2009 model) (also tried a Windows XP laptop, by comparison using the latest drivers from the HP website)
  OS: Mac OS X 10.6.2 with all available updates installed
  Method of connection: cable Ethernet connection to the router wireless
  Printer drivers: version 2.2.1 (Apple provided, drivers HP never installed as system comes with 10.6)
  Wireless router: Apple TimeCapsule (early 2009) 1 TB, honing a/d and modes of b/g on 2.4 and 5 GHz. TimeCapsule is in transition as the DSL modem handles DHCP service mode
  Encryption: WPA2 Personal, no MAC filtering or hide the SSID.

  IP addressing scheme: all addresses are distributed by the server DHCP without reservation of any kind

  The TimeCapsule is sitting three inches from the printer and the printer indicates the complete signal. Connecting the printer to the wireless network and setup of the printer on the Mac went off without a hitch. Only when you print a test document discover us the problem. The wireless network will behave as expected when you access Internet from Mac and Windows devices (tested with a laptop computer Dell XP and a MacBook with OS X 10.6.2), so I don't see any problem with the wireless network together.
  
  Attempt to use:
  1 reboot and power off, wait, restart the computer
  2 reset the print subsystem, the printer off and on again and reinstall the printer

  3. disconnect the power to the printer and let it sit for several minutes before trying to print wireless.
  
  None of them worked.

  I don't know exactly what is happening... I'll have to think about.

  Looks like you're running with the current configuration.

  Can we call this resolved?

• HP Photosmart Premium C309g: 10 Windows printer driver for HP Photosmart Premium C309g

  Where can I find a Windows 10 driver for HP Photosmart Premium C309g printer?  I tried the Printer Wizard and it didn't work.  Thank you

  Thanks, it worked!

• Landscape problems printing on my HP Photosmart Premium C309g

  Hello

  Excel 2007 on my HP Photosmart Premium C309g print it will not print anything in landscape orientation.  He spotted print correctly, but when you send it to print it it transformed into portrait and prints only about 1/4 of the information sent (essentially the first two columns) in a slightly stretched way that makes running along the entire page.

  I am running Windows Vista Home Premium 32-bit (Version: 4.0.0.7 @ OS: Windows Vista Service Pack 2)

  The printer software version is: 140.000.000.000

  The firmware version is: WHM1FN0931BR

  The printer driver version: 70.101.203.0

  I tried to recreate the document and change various settings in Excel, but nothing helps, she always print previews just like it should print, but then returned to Portrait orientation when the printer she spits and displays only 1/4 of the information.

  I found a few other places posted online where people have the same problem, but no solutions to the problem.  Can you please help me with this?  Anyone?  Thanks in advance to anyone with a suggestion that solves this problem!

  LAST UPDATED... IF ALL GOES WELL!

  The following steps appear to have solved the problem.  I've recreated the worksheet that was giving me problems with alignment issues and it prints fine now.  Must have been a problem of conversion of an older version of Excel which caused maybe.  But I have now printed a few different worksheets in the landscape with success with my connection wireless with the following parameters.  Hope this works for you if you find it and need a solution.

  Click Start > Control Panel > printers.  Then right click on the printer icon > click Properties > click on the Advanced tab > Select Print directly to the printer.  Click apply > OK

• Lightroom 2 - cannot print without margins, even if the printer can

  Hello

  I can not print prints A4 borderless, although there is the option in the printer driver and the software itself to enable this feature (which I activated and he even mentions printing without margins in printing from Lightroom). I can print perfect as a4 borderless prints from iPhoto on Mac and my printers have the software itself (HP Photosmart Studio) my printer is a HP Photosmart D7260.

  Any idea?

  In the lightroom print section, there are always 2 thin white bars on each side of printing to indicate that printing will not be without borders, whether a print portrait or landscape, it is the same when printing... 2 ugly thin white bars. I've attached a screenshot of what I see my end.

  Mike.

  Unfortunately you do not have the visible right panel, or I might know this: you have zoom to fill on?

  What it looks like to me, is that the culture of the image is different from the culture of paper, so you see the white bars. By clicking on Zoom to fill should solve the problem.

• HP envy 4520: cannot print without directly using wireless

  I want to hp 4520. I want to print without using the direct wireless to my laptop. I always disconnect my home wifi network and use network want to live to be able to print wireless. Is it possible to print from my laptop using my local network, or I have to use the direct wireless to be able to print.

  Hello
  
  Try to remove the printer and then add it again by opening the Preferences tab and then selecting «printers & scanners»
  
  From there, click on the sign less under the printer icon to remove the printer and then add again using the sign.
  
  This may help to solve your problem of connectivity.

  

• Want to 5640 e - Allinone: HP Envy 5640 cannot print without problem indicated

  My hp wireless want 5640 e - Allinone scanner/printer all of a sudden couldn't print more with no error showing.

  This printer has been used very frequently and it used to work well.  However, I kinda stopped using it for about 2 weeks, and today when I tried to print, whenever I sent a document to print, the printer status showed 'Impression' and suggested that the documents have been printed successfully; However, the printer was actually nothing.

  I tried to uninstall/reinstall the hp printer driver for several times, used hp print and scan doctor showing all the controls without error, turned off the firewall, checked the wireless connection for my laptop and the printer and even used a USB to connect my laptop and printer, but still failed to get a response from the printer.  Fortunately, he was able to print an internal test page by printing HP and scan doctor, but not a test page.  In all these processes, the State of the printer was still showing indicating "Ready" for printing without error.

  On the other hand, my printer have been able to print several documents sent from computer laptop of my roommate via connection Wi - Fi, and my laptop would have also ordered my roommate, a Canon one printer, to print via wifi.

  This situation has botherd me all night and I'm actually much more dependent on the printer now that the school year has started.   I really hope that someone can solve my problem and I would appreciate his helpfulness.  Urgent need of your help!

  Thanks in advance,

  Willow

  Hey Willow.

  I see that you are having a problem wireless printing using your printer HP Envy 5640.

  If your roommate can print using your printer wireless, then I think that there is nothing wrong with his connection.

  To restore the State of your printer, you can try to do a Hard Reset. Simply unplug the power cable from the wall outlet, then to the back of the printer. Wait at least one minute, then plug it on both ends. Normally the printer will power on automatically. If this is not the case, simply press the power button.

  Blue wireless light should remain solid, once the printer is powered completely.

  On your PC, go to run by pressing Windows + R keys on your keyboard.

  Type services.msc and Services window should appear.

  Restart the services listed below by right-clicking on them and selecting restart. If it has not started yer, select start.

  1. print spooler

  2 IP Helper

  3. web client

  4. network access protection agent

  Try to print all your documents and see if it will work.

  Hope this will help.

  Nice day!

• Photosmart C4580 print without wires after installing Snow Leopard

  Hello. I recently installed Snow Leopard on my MacBookPro. Since then, my Photosmart C4580 print wireless. I checked the updates of the software and the message computer read that I was up-to-date so I don't know what to do. Any suggestions?

  Geez-you are a genius! Thank you very much - your solution has functioned perfectly!

• cannot print without a box ' save print out put as "coming, what is new since the last update of firefox

  Since the last update of firefox, which has been really helpful for blocking popup, I can't print anything for example an email or bank account information without a box entitled 'save the output as' with lines of file information usual name and location. I don't want to do and have never had to do before, also when I close the box a "Printing error" box appears and I can't print.

  The setting you make must persist until you change it again. The "default" is the last used printer.

• printer has no illumination and cannot print manually - HP Officejet 6700 Premium

  I have a HP Officejet 6700 Premium - I can print from my computer, but can't print manually.  The button does not illuminate.  I can't scan, print manually.  Suggestions how to operate manually the this printer?

  Hi Beachwoodgirl,

  Welcome to the HP Support forums.   I understand that you are unable to make a copy of the front of your printer Officejet 6700.

  Please follow the steps for a Solution in the Scanner failure paper paper.  You don't specifically mention you found the error but it is what it sounds like.  You can also use HP Print and Scan Doctor for Windows.

• How to configure a printer without wire of Canon (MG4150) to the Airport Express

  In my living room, I have a cable modem that is configured in Bridge mode. On the first floor in a room, I installed an Airport Express station. Everything works well except my printer Canon (MG4150) does not work. What is the solution for my problem?

  This Canon printer supports wireless connectivity, should just be configured to connect to the wireless network provided by the AirPort Express. Is not the way you currently put in place?

• What to do when printer without wire connection is off

  What to do when printer wireless connection is off?

  Hello

  See this page to select your language:

  http://support.Microsoft.com/common/international.aspx

  ====================================

  Or sorry that it is area English.

  Left click at the bottom of the Microsoft Community page

  English and set your language.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• WPSM54G V1.1 - Cannot print without you connect manually - Vista

  Have just set up printing with a Samsung SCX4200 MFP print server. Took a little time unistalling and reinstalling the printer drivers to operate, allowing the computer to download the latest driver for Microsoft Vista was the cure. Anyway thought I got it working, test page printed during installation but etc...

  Now when I try to print any documents I have to manually connect to the printer by clicking on the icon of the client. I guess that's not how it is supposed to work! I tried selecting "print directly to the printer" as was proposed and also tried to remove the TCP/IP port that was also proposed for a connection problem, but it won't let me delete the ports (perhaps for good reason!).

  If someone has an idea of what I can try to solve this problem?

  Sorry - should add that I tried to turn the auto-dissconnet which doesn't seem to work or make a difference. Don't have the always-connected computer prevents any other computer on the network to print?

  Well................. I don't know how, but everything works now. Just power off, then on the print server, then the router, ran the diagnostic program who wanted to install the 'new' driver, I let him do this, and now everything seems to work very well :-)

• Cannot print search for hp photosmart D110 series [E1112D] for air

  Hello.  I have a MacBook Pro 15 with Lion, an iPad 2 and iPhone 4.  Recently I updated the HP driver and now I can't print - air or find it in settings - and I have trouble printing via Adobe PDF files.  The IPad support application does not show this model, but he previously worked.  Help!

  Hi Justjoan123,

  Sometimes, the printer loses its way. Try unplugging the printer, the router and turn off the iPhone/iPad. Then (in that order) reconnect the router, wait until he comes back completely, and then reconnect the printer, wait until it comes back on (wait until the wireless stops flashing light and sound towers). Turn your iPhone/iPad. This expected to solve your problem. If you still have problems with it, please do not hesitate to call us at the 1-800-474-6836.

  -Josh M.