Cannot read the CD after you have used the active file system
I use the active file system in Vista to save my work on CD - R. I have often refer to these discs, and occasionally add other files. Once the disk is full, I start a new.
After referencing files on a disc, I pushed the button as usual. The disc was not immediately ejected. A window on the toolbar open and told me to wait and finally ejected the disc. When I tried to use the disc again, I could not access the data. I know that the data is still on the disk. In 'Computer' I see '327 MB 702 MB free space'.
If I click on the drive or try to open it, I get a message "no answer." Finally, I get a window that says to "drag files to the disc to add data. Vista think it as a blank disc.
Is it possible to access data on the disk, so I can save up to a new drive? Also, what hurts which has caused this problem? I don't want to do it again.
Thank you!
Bob
Hello
Check the drive in another computer, better check in several. CD and DVD door, especially
RW. If the question with a single disc? There are companies that may be able to recover the
data if it is quite expensive.
Very good idea to have redundant backups.
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
Tags: Windows
Similar Questions
-
I have the latest downloadable version of the LR5. It crashed while it was perceived 1:1 uttered during an import. After a restart of the Win764(), it shows a message that LR has to leave because he cannot read the preview files and it will try to fix it the next time's lance. I get the same message to another and whenever he throws so I can't launch LR at all now.
I get the preview of a file has been corrupted somehow. Is it possible to fix this without having to build a new catalog?
Use Windows Explorer to open the folder containing your catalog. You will see a folder with the extension .lrdata. You must remove this folder, and then restart the Lightroom. Lightroom will generate a new folder of previews.
-
Cannot delete files from 0 KB Word 2003 "cannot read the source file or disk.
Original title: how remove the files from Word 2003 0 Kb which can not be read - file cleaner empty and an empty folder solvent do not work - "cannot read the source file or disc!
I have a number of Word 2003 files that I'm unable to delete, since the message "Source file can not be read"appears when I try to delete.
I have tried vacuum cleaner and Remover empty folder, also delete - file but cannot delete what cannot be recognized. Can anyone help please? Must be an easy way to do what I forgot, because I can't send files that contain some of these bulk files in my backup hard drive, the process stops when it reaches the 0 kb file!Hello
1. where are the files located?
2. are you able to open this file?This can happen if the file is used by some programs / demand or is corrupt.
Follow these steps:
Method 1: Check if you are able to delete the files in safe mode.
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=trueMethod 2: Ownership of files and check if you are able to delete.
http://support.Microsoft.com/kb/308421 -
Computer cannot read the .vp3 files needed for my embroidery software
Title: original .vp3
I try to install the embroidery software that came with my new sewing machine and although pilots seem to have installed ok I can't access embroidery designs, because the computer says that it cannot read the .vp3 files. Why he cannot read, and how do I read that I can use on the machine. Someone told all the answers no computer talk please.
Unfriendly computers Hello,
I'm not very familiar with the .vp3 extension but do not know that it is an extension that Pfaff is normally used. Look at the link below, because it gives the means of obtaining the .vp3 on a Windows machine.
http://www.PFAFF.com/ca/en/media/CA/PF_INSTRUCTIONS.PDFYour program is not compatible with Windows 7. Check and see if you can use compatibility mode.
Compatibility mode is incorporated on your computer, when you right-click on any application or program and select it properties, you have a Compatibility tab.
In compatibility mode, we have options to manually change the settings.If you have problems with a program that worked correctly on an earlier version of Windows, select the compatibility mode that corresponds to this version.
Run this program in compatibility mode for:
Select the Compatibility tab: you can choose to run the program in Windows XP compatibility mode, or even all the way back to Windows 95 compatibilitySee the below link for more information about the same:make sure to run older programs in this version of Windows: http://windows.microsoft.com/en-US/windows7/Make-older-programs-run-in-this-version-of-Windows
Please let us know if this helps solve your problem.
Sincerely,
.
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Hello
Im making a new 12.1.1 install the new test server and unziped downloaded media on the disc (not not using DVD). I ran not adautostg.pl because I felt is was not necessary because the downloaded media.
I did the pre-installation steps according to metalink 761566.1
He did uncompress drives then I get the following error and I can't file: addbtmpl.drv anywhere. This is step 2 of 5-> database configuration 92% (RW50004). I can't proceed immediately.
/U01/app/Oracle/DB/tech_st/11.1.0/appsutil/log/VIS_ < servername > 09171403.log
Logfile located at /u01/app/oracle/db/tech_st/11.1.0/appsutil/log/VIS__ < servername > ApplyDatabase_09180926.log
| 0% completed AC-00402: cannot read the driver file: /u01/app/oracle/db/tech_st/11.1.0/appsutil/template/addbtmpl.drv
Cannot run configuration database using RapidClone
RW-50010: error:-script returned an error: 1
RW-50004: Error Code when you run the external process. Check the log file for more details.
Install the driver of database running for instance SCREWS
Thank youIm making a new 12.1.1 install the new test server and unziped downloaded media on the disc (not not using DVD). I ran not adautostg.pl because I felt is was not necessary because the downloaded media.
You don't need to run the intermediate script if you have downloaded the site Web e-Delivery - in the electronic help files fast delivery to install in Oracle E-Business Suite Release 12 [406138.1 ID]
I did the pre-installation steps according to metalink 761566.1
He did uncompress drives then I get the following error and I can't file: addbtmpl.drv anywhere. It is step 2 of 5--> (RW50004) database configuration 92%. I can't proceed immediately.0% completed AC-00402: cannot read the driver file: /u01/app/oracle/db/tech_st/11.1.0/appsutil/template/addbtmpl.drv
It seems that the file is missing.
Please run md5sum according to (checksums MD5 for R12.1.1 Quick Install Media [802195.1 ID]) to check the integrity of the domain stage directory before running the quick installation.
Thank you
Hussein -
"Cannot read the source file or disk" when copying photos
I am train back to top/save families photographs stored on the C drive in the folder 'My photos' on an external HARD drive.Whenever I am trying to copy and to, I get a message saying "cannot read the source file or disk. If I keep on pressing the button 'Try Again', he eventually some of the files copy the external HARD drive and fails on some. There are times when I hit the "try again" Button to 30 times before it complies.I am logged on as administrator and am running Windows 7 on a HP laptop. Could you help me debunk this? I am beyond frustrated with this since I want to save precious family memories, but I am upset about windows on each attempt.Thank youSandrineHi JasjitRehsia,
I've seen some posts where it is perhaps due to an error on the hard disk. See the article after some troubleshooting:
http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors
I hope this helps!
-
Error copying file or folder: cannot read the source file or disk.
My problem occurs when you try to copy on the same computer I am on (or to a remote drive). I get one of these messages in the dialog "error copying file or folder.
box:
Impossible to copy 'Filename': data error (cyclic redundancy check).
Impossible to copy 'Filename': cannot read the source file or disk.Hey Norton victim,
(a) what is your operating system?(b) what program file you are not able to copy?
As the files are copied, Windows verifies that the data that has been copied are the same as the source files. The cyclic redundancy check (CRC) error occurs when the copied data does not match the original.This could be down to a mistake of the DVD, the disc goes wrong and has failed to 'read' the file properly or the file was placed on a bad sector on your hard drive. (Could be just down to a scratch or some marks on the dvd, maybe clean it if necessary and try again).I would run a check disk (CHKDSK) against the drive to rule that, although lacking - you have another dvd player to try the disc again? If so, try the dvd in another drive, or even a completely different machine to try to pin-point the problem.At the command prompt, type the following command and press ENTER:Chkdsk /rNote: If bad sectors are detected when running check disk utility and attempt recovery of bad sectors is verified during the verification of the drive for errors, data in the bad sector can be lost as they tried to recover bad sectors.
FOR INFO:Data error (cyclic redundancy check)"Error Message When Outlook downloads E-mail
http://support.Microsoft.com/kb/319128
Aziz Nadeem - Microsoft Support -
Windows 7 can't copy files on external hard drive and keep showing "cannot read the source file or disk" HELP me PLS
I'm going crazy because of thisHello
1. What is the format of the file system on the external hard drive?
2. are you able to copy or move files into the computer?You can follow the suggestions mentioned below and check with the question.
Method 1:Delete CCG, prefetch files.Step 1: Delete Temp files(1) open the window run (Windows key + R)
(2) type %temp%, and then press ENTER
(3) delete all Temp files in the Temp folder
Step 2: Delete Prefetch files(1) open the window run (Windows key + R)
(2) type %temp%, and then press ENTER
(3) delete all files in the Prefetch folder.
Method 2: Run the tool (SFC.exe) System File Checker, try to copy the files and check.Follow the form of measures the following link: http://support.microsoft.com/kb/929833Method 3: Run the check disk then try to copy the files and check.
Check a drive for errors
http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errorsNote: If bad sectors are found in the hard drive then it could try to fix this particular sector. If you have any data on that, it can get lost.See also: http://support.microsoft.com/kb/976972I hope this helps! -
new pc with windows 8.1, and no downloaded installed cs5, no problem open deck and cs5, but cannot read the raw file, try to update, cannot complete or update failed, please help
Looks like you have somehow the mac version.
Download the updated windows 6.7 camera raw from this link:
-
Cannot read the PDF files created by the FTP adapter
Hello
I cannot read the pdf files generated by the FTP adapter with its default settings.
Can someone guide me how to proceed with him. I guess I have to change something in the mechanism of coding in the FTP adapter outbound connection Pool, but do not know what is to be.
Thank you
Richa
Hi all
I got the solution. I was unable to read .pdf files because the FTP adapter send files just by changing the extension of .xml to .pdf .txt is the reason why it was not readable.
We had to write a java code to convert the .xml file .pdf and then PAA to the FTP adapter.
Thank you
-
Cannot delete file: cannot read the source file or disk
When you try to delete a specific folder which shows on the list, I get a dialog box saying: error deleting file or folder... Cannot delete file: cannot read the source file or disk
Is the path to the really long folder?
Any file or folder has a space beginning or end?
Click Start, run, type cmd , and press ENTER to open a command prompt. In the command prompt...
For a file test
DEL \\.\driveletter:\path\filename
For a test folder
RD \\.\:\ \ If this doesn't help not please let us know the full path (and the name of the file if it is a file).Tricky
-
cannot read the source file or disc for install.wim when file copying.
I'm doing a windows 7 bootable from a USB key, and when copying files every thing goes more except for the install.wim
I get the error message "cannot read the source file or disk.
I checked there is enough space on the disk, and I also tried copying from disk to my office, same question.
I tried using the command line to move the file and get an "Access denied" error message, which I believe is the root cause as to why I can't move the file in the first place.
Hello
try to run the System File Checker.
Here is the link:
http://support.Microsoft.com/kb/929833
It will be useful.
-
I can't delete a file from my counter top. Error message: cannot read the source file or disk. He is an Adobe file with logo in white box.
Boot into safe mode and see if it will remove. If this is not the case, try this tool.
Unlocker File Remover
Download it from FileHippo
http://filehippo.com/download_unlocker/Download from CNET
http://download.CNET.com/WOT/3000-2378_4-75011499.html -
How can I make my DVD default to the "active file system.
original title: I have losted the answer to my question.__Would please sent again .__How do my default of DVD in the "active file system" __Regards Jack
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hello
Windows will default to the active file system but it will remember the setting in the
same session. 3 third party programs, especially those that run at startup, when it is run may also
Resets the default value.Burn a CD or a DVD (see this short page for default information)
http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVDShould which CD or DVD format I use?
http://Windows.Microsoft.com/en-us/Windows-Vista/which-CD-or-DVD-format-should-I-use==========================================================
A good library of information:
Burn a CD or DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/b47eb51a-ea6d-4d97-97b0-2d07a59316981033.mspxHow to burn a CD with Vista
http://ITsVISTA.com/2006/12/ITsVISTA-Tip-10-how-to-burn-a-CD-with-Vista/Burn a CD or DVD in Windows Vista
http://maximumpcguides.com/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Vista/Microsoft video - how to burn CD/DVD
http://www.YouTube.com/watch?v=0BwF60m05m8Excellent Forum for help with programs and CD/DVD problems
http://Club.cdfreaks.com/Burn a CD or DVD in Windows Media Player
http://windowshelp.Microsoft.com/Windows/en-us/help/30ffa641-B682-4315-8c7e-8a29f383a7131033.mspx
Burn a CD or DVD in Windows Media Player: frequently asked questions
http://windowshelp.Microsoft.com/Windows/en-us/help/51a88740-Abda-4144-9176-cec79cca31e81033.mspxBurn a CD or DVD in Windows Media Center
http://windowshelp.Microsoft.com/Windows/en-us/help/9ee6cb78-bd7e-4DE3-A154-82d40c4289e01033.mspxBurn a CD or DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/b47eb51a-ea6d-4d97-97b0-2d07a59316981033.mspx
How to burn an Audio CD - see also related Articles
http://www.vista4beginners.com/how-to-burn-an-audio-CD
Burn a CD or DVD using Windows Vista - a video
http://www.YouTube.com/watch?v=0BwF60m05m8Disc burning: frequently asked questions
http://windowshelp.Microsoft.com/Windows/en-us/help/2fa35b0d-B280-4589-9805-55e753888f5c1033.mspxShould which CD or DVD format I use?
http://windowshelp.Microsoft.com/Windows/en-us/help/2af64e60-60AA-4d79-AB6C-3a5db5806cbe1033.mspxWindows Media Player playlist: frequently asked questions
http://windowshelp.Microsoft.com/Windows/en-us/help/4bf0d986-a1cb-40d2-94de-85dba30a83831033.mspxGet the most out of WMP11http://windowshelp.microsoft.com/Windows/en-US/mediaplayer11/default.mspx
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
I have some files that have been sent to me by a colleague. I have removed but cannot delete the last file. I've never met this before. What should I do?
Thank you
Sunil
Try this:
http://www.ehow.com/how_8023561_cannot-delete-files-Windows-XP.html
It will be useful.
Maybe you are looking for
-
How can I get rid of ArcadeParlor
I have just recently began to receive dozens of advertising pop-ups/ads/videos whenever I try to use Mozilla Firefox. I found the program on my pc and was able to uninstall it. I can't understand how to avoid the overlay all. unique. thing. I. don't.
-
How to install my printer hp officejet 6500 has no drive
How can I install my hp printer officejet 6500 a without a disc?
-
No sound/video game; Only the system sounds
I have a Toshiba Windows XP and there is no noise video or game, only for system sounds. Even though I have earphones in, it's the same problem. Someone please help me. I like to watch videos and play games with the sound. Thank you.
-
How to reformat hard disk and write the hard drive C, of zeros
I gatewayway 500 x with windows xp home ditiond... This is a manufactured office 05/28/02. I have all the restore disks. How to write c or a hard drive, of zeros to make clean reinstall? It must be real simple, but people at the door give me a hard t
-
Driver primary IDE channel necessary to install Vista
System Card mother Intel D850EMV2 HD IDE 120 g I can do a clean install with no problems. However, I want to dual boot with Windows 2000. Install Vista wants me to the floppy with the driver for the primary IDE channel. I tried the motherboard cd