Cannot read the old laptop hard drive attached again, says disk needs to be formatted

Similar Questions

• Disk management will not read the 2nd internal hard drive more!

  Hello

  I am a user of windows 7 and later than yesterday (2016_Feb_02) managing disks stopped to read the secondary internal hard drive (it was working perfectly well before). Does CPU, a beep when it is turned on or even rebooted and more when it comes to the windows logo, the PC hangs for a good 15 seconds.

  The hard drive was an external hard drive and I removed the cover must be installed on my PC, but it has worked well for more than 5 months so far.

  I would like to reuse the hard disk without losing any data.

  Information on PC:

  Compaq

  RAM 2 GB

  Purchased in 2009

  Details of the hard drive:

  Seagate

  2 TB

  Please let me know if more information is needed.

  Thank you very much.

  Download SeaTools for DOS, burn the ISO file downloaded to a CD (you can use the free ImgBurn) and boot from this CD.

  http://www.Seagate.com/support/downloads/item/SeaTools-DOS-master/

• Cannot copy file: cannot read the source code or drive WINDOWS XP

  I'm trying to transfer pictures on my old XP computer on an external hard drive.  After performing a backup on the drive hard seagate WD I went looking for pictures on the external hard drive, and they aren't there.  I went back on the XP machine and tried to copy the files to a CD but I get the message cannot copy file: cannot read the source code or the player.  I can open images but cannot move it to another folder or copy and paste pictures anywhere.  The photos are saved in an outdated version of microsoft's digital imaging software.  Help, please.

  Hello

  (1) is the specific question of the images?

  (2) where the images are on the computer?

  You can try the following methods and check the status of the issue.

  Method 1:

  Configure the computer to clean start State to check software conflicts. See the following link on how to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 4 of the above article.

  Method 2:

  If the problem is specific to the pictures folder, then it might be a problem with permission. You can try to take ownership of the folder and check if you can transfer it. read the following article.

  How to capture a file or a folder in Windows XP?

  http://support.Microsoft.com/kb/308421

• Qosmio F10 - cannot change the type of HARD drive in the BIOS

  I want to change my hard drive, but the category in the BIOS is not editable.

  I can not change the type of hard drive in the BIOS on my desktop PC.

  Hello

  And you want to change in the BIOS now?
  I put t know which option you mean exactly

  The drive in the BIOS, you can change t. That's why you should buy a new

• Windows Media Player on my Dell Windows Vista laptop cannot read the old files mp3 (2009 and past).

  In the past (2009 and prior), Windows Media Player has been able to play these MP3 files (consisting of language foreign podcasts). However, after all the updates

  Microsoft, there is now NO SOUND when Windows Player running the old mp3 files. The reader can read the new mp3 files from podcast language site, however, there is no sound when he plays the old mp3 files. Even after you download the codec from CNET files, there still no sound when Windows Player running the old mp3 files. However, Itunes is able to read these files. What should I do to get Windows Player on my Dell Vista laptop to play these old mp3 files? Thanks for any help.

  Hello

  I suggest you to check the below link that talks about the same kind of problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-sound/no-sound-in-Windows-Media-Player-110600218111-only/5324408a-4a5f-4ACC-88a3-65871b11e124

• install the new laptop Hard Drive

  Hello LR Adobe Support.

  I have 5 LR installed on two computers one single office, another laptop. Hard drive portable c when the bad my Builder said I had a connection problem crossed that my programs would not start all the time. Anyway I did install a new SS drive can I install on my new HD LR? I have the drive both of the copies I own with serial numbers.

  Thanks for your help

  Barry

  First of all, it is an open forum, not Adobe support... so MOST of the answers here are other users (and, the LR5 is an old version, so I don't think that Adobe provides support)

  When you have a non-functional computer and cannot turn it off, click on the link below

  Serial number and activation support (no-Cloud) https://forums.adobe.com/thread/2041990 to adjust the number of activations

  You install programs exactly in the same way you did the 1st time... Put your disc in the drive, and enter your serial number when asked

• Satellite L735 - cannot start the backup of HARD drive

  Hello

  I want to buy a new HDD in my laptop a L735. Before doing this, but I need to back up the windows installation files. Whenever I try to do a backup, but it does not allow me and a message appears on the screen saying that it is not possible. Here's a screenshot of it:

  http://img694.imageshack.us/img694/7088/screennv.PNG

  Could someone help me with this please?

  Kind regards
  Darren

  >... I need to back up the windows installation files
  What you try to do is not the Windows installation files back up but the creation of recovery disks.
  For some reason of original Toshiba recovery image cannot be found or detected on the HARD drive. I don t know what that you did, but it can happen if hidden recovery partition is deleted or partition structure has been changed.

  Do you have more questions?

• Need to test the broken laptop hard drive but has strange adapter

  I have a Compaq NX7400 and the screen is broken. I want to test the hard drive to see if that works, but it has a weird card. Does anyone know if it emerges because I can then put it in a laptop from work to see if it works?

  This works. This is the main interface. It's called SATA... it has replaced the old interface IDE brass pin about 8-10 years ago. That the hard drive can be connected to a desktop computer with an open SATA data port and adapter and SATA power adapter; right interface is identical to a SATA desktop hard drive.

• Product name: 120-011 IN: fixing the old internal hard drive

  Who so ever of law...

  My problem is that when I bought HP 120-011 IN he came with the capacity of 500 GB internal hard drive, but my old system had a 1 TB hard drive. So as my all files and data is in this hard drive old I want to fix that on my new PC.

  I therefore ask you to give me suggestions on how to attach my old 1 TB drive to my new PC.

  Abhishek.

  Try one of these.

  http://www.eBay.com/ITM/2-5-SATA-to-USB-hard-drive-caddy-HDD-case-enclosure-notebook-black-/331085862772?PT=LH_DefaultDomain_3&hash=item4d16415774

  REO

• Cannot restore the files from hard drive damaged in disk utility

  Questions

  1. can I save my files/fix this problem without having to restore via disk utility?

  2. What am I doing wrong / I can do to restore correctly on an external hard drive via disk utility?

  Background

  Last week when I turned my MacBook Pro 2012 I got stuck on the gray login screen. The progress bar moves very, very slowly and when he finished my laptop spontaneously restarted and repeated the same thing over and over again. Here's what I tried to do so far:

  -Start in SafeMode: does not work

  -Extended Apple Diagnostics/Apple Hardware Test: test results: no problem found

  -Utility (recovery and valorisation of the Internet) disk: disk hard Mac (Apple HDD) and Recovery (partition) HD are not damaged, but the partition disk0s2 is (created after a failure; a year not logged - if it matters) and in 'check' and 'fix' the latter I get inconsistent error messages.

  Disk utility error messages

  Most often, I get this error:

  The volume disk0s2 was found damaged and must be repaired. Error: This disc needs to be repaired. Click on the ERD.

  Stopped disk utility check "disk0s2."

  Disk0s2 volume could not be repaired after 3 attempts.

  Error: Disk utility can't repair the disk. Save as many files as possible, reformat the drive and restore your files packed around the top.

  I also received this error message once:

  Wrong number of extended attributes (it should be 730585 instead of 730589)

  Wrong number of access control lists (there are 1364 instead of 1368)

  Save the files to external hard drive?

  Before that I didn't even used/accessed Time Machine.  I have a new HDD external, formatted for Mac. I created two partitions: backup and Time Machine (so I can start using it once I have find this current issue). When I try to restore disk0s2 external hard disk I get an error restore failed (252 or 254, I think).

  When you drive is damaged, it is extremely difficult to make progress.

  I recommend the lessee a spare drive in an external enclosure and install MacOS on it again. Then boot from that and you are back in business. You can use the full power of Mac OS AND additional utilities to recover your files.

  More 350 000 files on your damaged disc are Mac OS - and those that can be installed in replicas of prefect by a new installation on a new drive. You can't Brute force 'all' copy of a damaged disc. What you want back damaged drive is not Mac OS X files - you want YOUR files. They are stored in the Directory/users in a folder with your short user name. with additional utilities, you can simply copy this directory, or use a recovery as data rescue program to get individual files.

• Can not read the files on hard drive

  I bought a new computer with Windows 7.  My old computer running Windows XP and has a virus which disabled permanently.  I want to recover the files from the old drive to the new hard disk.  I removed the hard drive from the old computer and put it in the new computer.  The new computer recognized and named E: drive.  However, Windows Explorer shows "this folder is empty".   But when I look at the properties of the drive E:, it shows that the old hard drive is 40% full.  Why is it impossible to see the files in Windows Explorer?  And how can this problem be fixed?

  Hello

  Check out the following and check:
   
  Method 1:
  Run a virus scanner and check:
  Viruses are known to cause these problems. Scan your computer for the Microsoft Security Scanner, which allows to get rid of viruses, spyware and software malware.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  
  Note: The Microsoft Safety Scanner expire after 10 days from the date of installation.
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
   
  Method 2:
  Viruses may have hidden files, try the steps in the following link to view it.
  Show hidden files
  http://Windows.Microsoft.com/en-us/Windows7/show-hidden-files
   
  Hope this information helps.

• Cannot set the password for hard drive on the W530 with Intel SSD 520

  Hello

  I have a w530 with an Intel SSD 520 in primary hard drive Bay. Whenever I try to set a password for the primary hard drive, it doesn't stick. If I chose master + user or simply user, I will enter the password, it will take the passwords without producing an error and then just dump back me to the screen of passwords while leaving the disabled hard drive password.

  BIOS is on the latest version for the w530 and SSD, the machine seems fairly normally operate differently.

  Does anyone have ideas how I can activate the password? Thank you!

  Hi, ctenorman

  I did some research and came across this thread of Intel. There are a few people in the thread who were able to set the password on this particular drive. It seems that changing the BIOS "SATA" compatibility mode, set the password, restart, and then change it to "AHCI" worked for some, but not all customers with this player.

  Good luck and let me know how it goes

  Adam

• Cannot open the USB external hard drive

  Original title: Hard drive

  I can't open the disk external hard usb and the device can see the list of devices and printer as 'USB to ATA/ATAPI Bridge '.

  Hello

  1. What is the exactly say by "device can see the list of devices and printer as"USB to ATA/ATAPI Bridge""?
  2. do you receive any error messages?
  3. did you of recent changes on the computer before this problem?
  4. were you able to open and use the external hard drive USB before?
  5. try to connect the external hard drive to a different USB port and check.
  6. are you able to access other USB devices with success?
  Method 1:
  I suggest you to run the fixit available at the following link.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

   
  Method 2:
  If the problem persists, try to uninstall and reinstall the USB controllers and check.
   

  (a) click Start, type Device Manager in the start search box and press enter.

  Bus USB controllers b) Expand .

  Note You need to scroll the list to find this point.

  (c) right-click the first USB controller under Bus USB controllers and then click Uninstall to remove it.

  step d) precedes the repeat for each USB controller is listed under Bus USB controllers.

  (e) restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  (f) check the USB device to see if it works.

  You can check the link for more information:

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:
  If the problem is not resolved, you can try to connect the hard drive to another computer and check.
   
  Let us know if it helps.

• I started having problems with windows 7 is not genuine not. I had to replace the hard drive on my laptop, but to restore a snapshot of the old failing hard drive. .

  I used the download from a previous post just to check if my copy was indeed enabled.  The results are listed below.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0x8004FE21
  Code of Validation caching online: 0x0
  Windows product key: *-* - 4F8HK - M4P73-W8DQG
  The Windows Product Key hash: Xs1iQgVeo0C + sObJxS7eu + FuBPQ =
  Windows product ID: 00359-OEM-8992687-00057
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {BED6955A-ADD1-4BFF-A73B-532792207817} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.120830 - 0333
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Home and Student 2007-100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Users\Kurt A. Brown\AppData\Local\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\slui.exe[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100

  Other data-->
  Office details: {BED6955A-ADD1-4BFF-A73B-532792207817}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-W8DQG00359-OEM-8992687-000572S-1-5-21-2348594013-2988628447-135780450TOSHIBASatellite A505INSYDE1.8020100525000000.000000 + 0004A043107018400F804090409Time(GMT-05:00) Standard is03TOSINVTOSINV00100100Microsoft Office home and Student 200712276F0FD63640740Xx 2U7ZH1mcLzPu8B2xK8IJuhjc plus 81602-928-9574262-683871

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00178-926-800057-02-1033-7600.0000-2452009
  Installation ID: 010371792021686926736144356935893366062274769915236573
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: W8DQG
  License status: licensed
  Remaining Windows rearm count: 3
  Trust time: 20/01/2013-08:02:32

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: n/a
  Beyond: 0x000000000001EFF0
  Event timestamp: 1:19:2013 14:29
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered the file: %systemroot%\system32\sppobjs.dll
  Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
  Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
  Altered the file: %systemroot%\system32\sppwinob.dll
  Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
  Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
  Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
  Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
  Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
  Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
  Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
  Altered the file: %systemroot%\system32\drivers\spsys.sys

  --> HWID data
  Current HWID hash: NgAAAAEABAABAAIAAAACAAAAAgABAAEA6GEqifoynmKOaDAGBDPys6T62iQostRfhFC4jkbK

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC TOSINV TOSINV00
  FACP TOSINV TOSINV00
  HPET TOSINV TOSINV00
  START TOSINV TOSINV00
  MCFG TOSINV TOSINV00
  ASF!   TOSINV TOSINV00
  SLIC TOSINV TOSINV00
  SSDT PmRef CpuPm

  now, your report looks normal. you're good to go.

• Cannot delete the old folder separate disk windows

  I had a system OS 3 for a while, Vista, Win7 RC and Win7 Pro.

  Win7 RC is pleased and I want to delete records from his drive to free up space.

  I took possession of the folder (including subfolders) windows and my account is an administrator with full control account, BUT when I try to delete the old directory of windows first it says I need give permission, I click on continue, she goes through the files, and then a box indicates that I need permission from account owner Joan to continue.

  I'm logged into this account. This account is me, but when I click on continue, it says access denied.

  It's the same with the old directory program files.

  I can't delete, or the old directory of users.

  None of them is used. All are owned by mey account (there are only two accounts put in place on my PC and mine's administrator.)

  I am running windows 7 Pro 64 bit installed on my E drive.

  The files that I want to delete are on the c drive.

  How this computer to recognize that my admin account has full right, remove the obsolete operating system?

  Thank you

  Can archaeologist, you access the OS Win 7 RC?

  If so, use it "Folder Options" in the control panel.

  To all the "hidden files" readable.

  You say that you are the administrator, you should be able to do.

  You also try to remove Vista, as well?

  Do the same with this.

  Why you be "denied access" is... because these system files 'hidden '.

  Once this has been done, you can now in Win 7 (the one you want to keep!).

  In administrative tools, select 'Create and format hard disk partitions.

  Right click on the BLUE bar, drive hard 'in question.

  This will give you... .with a drop-down window, containing...

  Opened.

  Explore

  Mark the Partition as "Active".

  Change drive letter and paths.

  FORMAT!             -(Third, make just... use this format.)

  Extend Volume... (This will be the second to be used, if the button remove one has not already removed those'hidden Files/Folders!)

  Reduce the Volume...

  Delete Volume---(Ces 4 sont ce que vous êtes après, surtout celui-ci)< to="" start="" with.="" you="" should="" be="" able="" to="" delete,="" being="" the="">

  Properties

  Help