cannot read the sd card. PCI device problem

Similar Questions

• Re: Satellite A200-28 cannot read the SD card of the digital camera

  Hello

  I just tried to get my laptop Satellite A200-28 to read my camera, an SD card and it happens in the card reader, but nothing happens.

  To what extent do you have to press or on my desktop, is not go very far before the card starts to blink and it opens the contents of the card. But on my laptop nothing.
  Just, it lets you put the card in but does not seem to realize is there actually.

  Any help on this would be much appreciated as it would be so great could receive laptop to read my camera card as easily as my office.

  Debbie

  :) Thanks for your comments buddy!
  Good to know that you resolved your own

• Qosmio F50 cannot read the SDHC card 4 GB

  Hello

  I have a laptop Toshiba Qosmio F-50-series.

  I plugged a SANDISK SDHC Card 4 GB on my laptop there is no reaction to recognize new media.
  No new driveletter nothing.

  Can you help me?

  Your Starmind/Thomas

  Hello

  The card reader supports 8 MB SD cards 2 GB and SDHC cards from 4 GB to 16 GB.
  Therefore, your card should be recognized without big problems.

  You insert it correctly?

  Also try to remove the card reader device manager, and then restart the laptop. After the Windows has started again, the card reader must be recognized as a new device. Then try to reinsert the CDHC CARE card

• Suddenly LR cannot import the photos because he cannot read the sd card

  "All of a sudden after I insert my sd card in ' my Mac Book Pro, I get the message that' 126 files on the map .

  cannot be imported because they cannot be read. »

  I have been using the same settings of import for more than a year.

  Hi rthomasbrr,

  • Make sure it is on a valid location and you have read/write permissions to the location
  • Make sure that the Destination panel is expanded when you click Import.

  

  Kind regards

  Assani

• Cannot read the sd card on media player video file video

  When I try to open the video file, the message says photo library cannot open this video. format of file not supported or u have no updates.  recently bought Home notebook toshiba.  not sure what to do. Help, please.

  Hello bestparlaywinter,

  Thank you for using Microsoft Vista answers Forum!

  What is the file format of the video file you are trying to play? You may need to use the default program features to set the program you want Windows to use to open your video file.

  To set the default program to use the following steps:

  ·        Click Start > default program

  ·        Choose to associate any type of file or Protocol with a program

  ·        Select the type of file (video format) in the list, and then click Change Program

  ·        Choose the program you want to use to open this file (for example Windows Media Player), and then click OK

  ·        Click close to exit from this window

  Try to open your video file again

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• I am running Vista Home Premium 32 bit and cannot read the SDHC 4 GB memory card

  I am running Vista Home Premium 32 bit and cannot read the SDHC 4 GB memory card, it worked in Fujitsu siemens but not now. Can anyone help in laymans terms not techno type talk how I can fix it.

  I'm a model so need to step by step instructions: o))

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message? If Yes, what is the full and exact error message?

  Method 1:

  I suggest to test the card by inserting it in a different USB port and later in another computer to test and check if it is detected.

  Method 2:

  I also suggest you to check if the memory card is detected by a different card reader.

  Method 3:

  I suggest you to see link and check if it helps:

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

• Satellite Pro U500 - 18 k cannot read the SDHC 8 GB cards plus

  Hi all

  My stops U500 - 18 k read the SD card. What SD card SD icon Windows explorer see, but when I am clicking on the icon, to get the message 'Please insert a disc in SD (J) '. I tried to read the 8 GB SDHC cards. The maps are certainly working. With MMC and XD card reader works well.
  I reinstalled utilities SD and card controller driver Richon. This does not solve the problem. OS Win 7 x 64. Any ideas?

  Thank you.
  Rytis

  Are you using this SDHC 8 GB card for the first time?
  Have you noticed the same situation using different SD cards?

• Cannot READ the CODE of REDEMPTION for Itunes gift card

  Cannot READ the CODE of REDEMPTION for Itunes gift card

  Take it back to the shop. It has nothing to do with MS

• problem with the LR 5 cannot read the RAW of Sony A7R II files

  I have a problem with the LR 5 cannot read the Sony A7R II RAW file

  Hi alexl

  Greetings!

  Support for this camera is added in Lightroom version 6/CC

  

  Your Options are either update of Lightroom CC/6 or Free DNG Converter allows to convert .raw .dng files.

  This way you can import into Lightroom and can work on it.

  Download link for DNG Converter:- Adobe - Adobe Camera Raw and DNG Converter: for Windows: Adobe DNG Converter 9.2

  Adobe - Adobe Camera Raw and DNG Converter: for Macintosh: Adobe DNG Converter 9.2

  Concerning

  ~ Assani

• Whenever I open the bridge, I get the Message "bridge has encountered a problem and cannot read the cache. Please try to purge central cache in the cache preferences to correct the situation. »

  Whenever I open the bridge, I get the Message "bridge has encountered a problem and cannot read the cache. Please try to purge central cache in the cache preferences to correct the situation. »

  Please suggest solution.

  Hi Adam,.

  Well, you purge the Cache?

  If not, did you go to the preferences, go to the caching and the last option is to purge the Cache.

  Also @Debbie: you could try to rebuild settings. To do this off bridge and then restart Bridge. However, having fingers on shift-Option-control at the start of Bridge. Keep until a window offering to reset preferences, purge entire thumbnail Cache and reset Standard workspaces. I suggest you choose the first two.

  And Abdul, you might want to try that as well.

  Let us know if this does nothing for you

• new pc with windows 8.1, and no downloaded installed cs5, no problem open deck and cs5, but cannot read the raw file, try to update, cannot complete or update failed, please help

  new pc with windows 8.1, and no downloaded installed cs5, no problem open deck and cs5, but cannot read the raw file, try to update, cannot complete or update failed, please help

  Looks like you have somehow the mac version.

  Download the updated windows 6.7 camera raw from this link:

  Adobe - Photoshop: for Windows: Camera Raw 6.7 update

• Bridge has encountered a problem and cannot read the cache

  For past couple of months, whenever I have start Adobe Bridge directly (and), it gives me an error saying: "bridge has encountered a problem and cannot read the cache. Please try to purge central cache in the Cache preferences to correct the situation. " I do the same through the preferences. And then the bridge takes a long time to load the thumbnails. And next time when I restart Adobe Bridge, same problem.

  It started hapennign all of a sudden for the last two months. It has been previously very quickly.

  Please notify all solutions.

  This notice of page adobe faecebook worked for me:

  Sometimes the purge of preferences is not all MS... So, you can manually go and delete the cache folder Bridge CS6.

  1. exit the bridge
  2. If mac goto: Users/username/Library/Caches/Adobe /.
  3 remove the Bridge CS6 (or whatever version you have) file
  4 restart Bridge. He will rebuild the folder and the files included in this one.

  HTH

• Satellite A20 cannot read SD memory card

  I have a portable Satellite A20. I can read SD cards up to 1 GB. I tried to read a card with 2 GB (and format). It does not work. Who can help me solve this problem? Thanks in advance.

  Post edited by: Rg1957

  Hello

  When the A20 was produced right now on the market, there is no SD card with more than 1 GB of capacity. Much more old models of portable computers cannot read the new SD cards. It is the same on my old Tecra M1.

  I'm afraid there is not much to do.

• WARNING: dell_psp_eql_routed: PspEqlReadRoutingTable:1138: cannot read the table on page

  Hello community,

  We went just to ESXi 5.1.0 build-1021289. We have installed MEM 1.1.2 and used to configure all of the iSCSI network and has chosen to use our BCM57810 10G cards for unloading rather than use the SW initiator. We are currently on firmware 5.2.6.

  We now see this error constantly in the vmkernel logs.

  2013-05 - 04 T 21: 06:40.074Z cpu4:240833) WARNING: dell_psp_eql_routed: PspEqlReadRoutingTable:1100:Invalid size package of page table (length 4096, 338 expected)
  2013-05 - 04 T 21: 06:40.074Z cpu4:240833) WARNING: dell_psp_eql_routed: PspEqlReadRoutingTable:1138: cannot read the table on page
  2013-05 - 04 T 21: 07:08.085Z cpu4:240833) WARNING: dell_psp_eql_routed: PspEqlReadRoutingTable:1100:Invalid size package of page table (length 4096, 2528 expected)
  2013-05 - 04 T 21: 07:08.085Z cpu4:240833) WARNING: dell_psp_eql_routed: PspEqlReadRoutingTable:1138: cannot read the table on page
  2013-05 - 04 T 21: 07:08.091Z cpu4:240833) WARNING: dell_psp_eql_routed: PspEqlReadRoutingTable:1100:Invalid size package of page table (length 4096, 2528 expected)
  2013-05 - 04 T 21: 07:08.091Z cpu4:240833) WARNING: dell_psp_eql_routed: PspEqlReadRoutingTable:1138: cannot read the table on page
  2013-05 - 04 T 21: 07:08.099Z cpu4:240833) WARNING: dell_psp_eql_routed: PspEqlReadRoutingTable:1100:Invalid size package of page table (length 4096, 2528 expected)

  We did all the additional configurations generally suggested - disabled ACK delayed, disable LRO, iSCSI timeout.
  I can't tell if it's having an impact on our performance or reliability. He sees not to be. However, these errors constantly fill our vmkernel logs.
  Out of curiosity, I went our adapter SW config and I do not get these more. We would really prefer to use unloading iSCSI broadcom cards now that the frames are supported. Has anyone seen else this error or know how I could get more details about this?

  ESXi 5.1.0

  Build-1021289

  The problem is the new broadcom driver, when you use the mode of unloading iSCSI.  VMware and Broadcom to release a patch.   For now just use the iSCSI SW.

• ORA-19846: cannot read the header of the data file of the remote site 21

  Hello

  I have a situation or I can say a scenario. It is purely for testing base. Database is on 12.1.0.1 on a Linux box using ASM (OMF).

  Standby is created on another machine with the same platform and who also uses ASM (OMF) and is in phase with the primary. Now, suppose I have create a PDB file on the primary of the SEED and it is created successfully.

  After that is a couple of log, do it again passes to the waiting, but MRP fails because of naming conventions. Agree with that! Now, on the primary, I remove the newly created PDB (coward the PDB newly created). Once again a couple of switches of newspapers which is passed on to the wait. Of course, the wait is always out of sync.

  Now, how to get back my watch in sync with the primary? I can't roll method until the required data (new PDB) file does not exist on the main site as well. I get the following error:

  RMAN > recover database service prim noredo using backupset compressed;

  To go back to November 8, 15

  using the control file of the target instead of recovery catalog database

  allocated channel: ORA_DISK_1

  channel ORA_DISK_1: SID = 70 = device = DISK stby type instance

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of the command recover at the 18:55:32 08/11/2015

  ORA-19846: cannot read the header of the data file of the remote site 21

  The clues on how to I go ahead? Of course, recreating the eve is an option as its only based on test, but I don't want recreation.

  Thank you.

  I tried like below:

  1 a incremental backup of the primary of the CNS where off the eve also taken primary backup controlfile as Eve format.

  2 copy the backup of the watch parts, catalogged them on the day before.

  3 recovered Eve with noredo option - it fails here with the same error pointing to the 21 data file.

  OK, understood. Try not to get back the day before first, rather than restore the controlfile and then perform the restoration.

  Make it like:

  1. take incremental backup of primary SNA, also ensures the backup controlfile format.

  2. copy pending, get the location of the data file (names) by querying v$ datafile on the eve. Restore the controlfile ensures from the backup controlfile you took on primary and mount.

  3. Since you are using OMF, the path of primary and standby data file will be different. (/). If you require catalog data from the database files pending.

  (Reason: you restore controlfile from elementary to step 2, which takes place from the main access road). Use the details that you obtained in step 2 and catalog them.

  4. turn the database copy by RMAN. (RMAN > switch database to copy ;))

  5 Catalog backup items that you copied in step 2.

  6. recover the standby database using 'noredo' option.

  7. finally start the MRP. This should solve your problem.

  The reason I say this works is because here, you restore the controlfile to primary first, which will not have details 21, datafile, and then you are recovering. So it must succeed.

  In the previous method, you tried to first collect all the day before, and then restore the controlfile. While remedial classes, always watch seeks datafile 21 as he controlfile is not yet updated.

  HTH

  -Jonathan Rolland